path: root/ext2ed/doc/ext2fs-overview.sgml

<!DOCTYPE Article PUBLIC "-//Davenport//DTD DocBook V3.0//EN">

<Article>

<ArtHeader>

<Title>The extended-2 filesystem overview</Title>
<AUTHOR
>
<FirstName>Gadi Oxman, tgud@tochnapc2.technion.ac.il</FirstName>
</AUTHOR
>
<PubDate>v0.1, August 3 1995</PubDate>

</ArtHeader>

<Sect1>
<Title>Preface</Title>

<Para>
This document attempts to present an overview of the internal structure of
the ext2 filesystem. It was written in summer 95, while I was working on the 
<Literal remap="tt">ext2 filesystem editor project (EXT2ED)</Literal>. 
</Para>

<Para>
In the process of constructing EXT2ED, I acquired knowledge of the various 
design aspects of the the ext2 filesystem. This document is a result of an
effort to document this knowledge.
</Para>

<Para>
This is only the initial version of this document. It is obviously neither
error-prone nor complete, but at least it provides a starting point.
</Para>

<Para>
In the process of learning the subject, I have used the following sources /
tools:

<ItemizedList>
<ListItem>

<Para>
	Experimenting with EXT2ED, as it was developed.
</Para>
</ListItem>
<ListItem>

<Para>
	The ext2 kernel sources:

<ItemizedList>
<ListItem>

<Para>
	The main ext2 include file,
<FILENAME>/usr/include/linux/ext2&lowbar;fs.h</FILENAME>
</Para>
</ListItem>
<ListItem>

<Para>
	The contents of the directory <FILENAME>/usr/src/linux/fs/ext2</FILENAME>.
</Para>
</ListItem>
<ListItem>

<Para>
	The VFS layer sources (only a bit).
</Para>
</ListItem>

</ItemizedList>

</Para>
</ListItem>
<ListItem>

<Para>
	The slides: The Second Extended File System, Current State, Future
Development, by <personname><firstname>Remy</firstname> <surname>Card</surname></personname>.
</Para>
</ListItem>
<ListItem>

<Para>
	The slides: Optimisation in File Systems, by <personname><firstname>Stephen</firstname> <surname>Tweedie</surname></personname>.
</Para>
</ListItem>
<ListItem>

<Para>
	The various ext2 utilities.
</Para>
</ListItem>

</ItemizedList>

</Para>

</Sect1>

<Sect1>
<Title>Introduction</Title>

<Para>
The <Literal remap="tt">Second Extended File System (Ext2fs)</Literal> is very popular among Linux
users. If you use Linux, chances are that you are using the ext2 filesystem.
</Para>

<Para>
Ext2fs was designed by <personname><firstname>Remy</firstname> <surname>Card</surname></personname> and <personname><firstname>Wayne</firstname> <surname>Davison</surname></personname>. It was
implemented by <personname><firstname>Remy</firstname> <surname>Card</surname></personname> and was further enhanced by <personname><firstname>Stephen</firstname>
<surname>Tweedie</surname></personname> and <personname><firstname>Theodore</firstname> <surname>Ts'o</surname></personname>.
</Para>

<Para>
The ext2 filesystem is still under development. I will document here
version 0.5a, which is distributed along with Linux 1.2.x. At this time of
writing, the most recent version of Linux is 1.3.13, and the version of the
ext2 kernel source is 0.5b. A lot of fancy enhancements are planned for the
ext2 filesystem in Linux 1.3, so stay tuned.
</Para>

</Sect1>

<Sect1>
<Title>A filesystem - Why do we need it?</Title>

<Para>
I thought that before we dive into the various small details, I'll reserve a
few minutes for the discussion of filesystems from a general point of view.
</Para>

<Para>
A <Literal remap="tt">filesystem</Literal> consists of two word - <Literal remap="tt">file</Literal> and <Literal remap="tt">system</Literal>.
</Para>

<Para>
Everyone knows the meaning of the word <Literal remap="tt">file</Literal> - A bunch of data put
somewhere. where? This is an important question. I, for example, usually
throw almost everything into a single drawer, and have difficulties finding
something later.
</Para>

<Para>
This is where the <Literal remap="tt">system</Literal> comes in - Instead of just throwing the data
to the device, we generalize and construct a <Literal remap="tt">system</Literal> which will
virtualize for us a nice and ordered structure in which we could arrange our
data in much the same way as books are arranged in a library. The purpose of
the filesystem, as I understand it, is to make it easy for us to update and
maintain our data.
</Para>

<Para>
Normally, by <Literal remap="tt">mounting</Literal> filesystems, we just use the nice and logical
virtual structure. However, the disk knows nothing about that - The device
driver views the disk as a large continuous paper in which we can write notes
wherever we wish. It is the task of the filesystem management code to store
bookkeeping information which will serve the kernel for showing us the nice
and ordered virtual structure.
</Para>

<Para>
In this document, we consider one particular administrative structure - The
Second Extended Filesystem.
</Para>

</Sect1>

<Sect1>
<Title>The Linux VFS layer</Title>

<Para>
When Linux was first developed, it supported only one filesystem - The
<Literal remap="tt">Minix</Literal> filesystem. Today, Linux has the ability to support several
filesystems concurrently. This was done by the introduction of another layer
between the kernel and the filesystem code - The Virtual File System (VFS).
</Para>

<Para>
The kernel "speaks" with the VFS layer. The VFS layer passes the kernel's
request to the proper filesystem management code. I haven't learned much of
the VFS layer as I didn't need it for the construction of EXT2ED so that I
can't elaborate on it. Just be aware that it exists.
</Para>

</Sect1>

<Sect1>
<Title>About blocks and block groups</Title>

<Para>
In order to ease management, the ext2 filesystem logically divides the disk
into small units called <Literal remap="tt">blocks</Literal>. A block is the smallest unit which
can be allocated. Each block in the filesystem can be <Literal remap="tt">allocated</Literal> or
<Literal remap="tt">free</Literal>.
<FOOTNOTE>

<Para>
The Ext2fs source code refers to the concept of <Literal remap="tt">fragments</Literal>, which I
believe are supposed to be sub-block allocations. As far as I know,
fragments are currently unsupported in Ext2fs.
</Para>

</FOOTNOTE>

The block size can be selected to be 1024, 2048 or 4096 bytes when creating
the filesystem.
</Para>

<Para>
Ext2fs groups together a fixed number of sequential blocks into a <Literal remap="tt">group
block</Literal>. The resulting situation is that the filesystem is managed as a
series of group blocks. This is done in order to keep related information
physically close on the disk and to ease the management task. As a result,
much of the filesystem management reduces to management of a single blocks
group.
</Para>

</Sect1>

<Sect1>
<Title>The view of inodes from the point of view of a blocks group</Title>

<Para>
Each file in the filesystem is reserved a special <Literal remap="tt">inode</Literal>. I don't want
to explain inodes now. Rather, I would like to treat it as another resource,
much like a <Literal remap="tt">block</Literal> - Each blocks group contains a limited number of
inode, while any specific inode can be <Literal remap="tt">allocated</Literal> or
<Literal remap="tt">unallocated</Literal>.
</Para>

</Sect1>

<Sect1>
<Title>The group descriptors</Title>

<Para>
Each blocks group is accompanied by a <Literal remap="tt">group descriptor</Literal>. The group
descriptor summarizes some necessary information about the specific group
block. Follows the definition of the group descriptor, as defined in
<FILENAME>/usr/include/linux/ext2&lowbar;fs.h</FILENAME>:
</Para>

<Para>

<ProgramListing>
struct ext2_group_desc
{
	__u32	bg_block_bitmap;	/* Blocks bitmap block */
	__u32	bg_inode_bitmap;	/* Inodes bitmap block */
	__u32	bg_inode_table;		/* Inodes table block */
	__u16	bg_free_blocks_count;	/* Free blocks count */
	__u16	bg_free_inodes_count;	/* Free inodes count */
	__u16	bg_used_dirs_count;	/* Directories count */
	__u16	bg_pad;
	__u32	bg_reserved[3];
};
</ProgramListing>

</Para>

<Para>
The last three variables: <Literal remap="tt">bg&lowbar;free&lowbar;blocks&lowbar;count, bg&lowbar;free&lowbar;inodes&lowbar;count and bg&lowbar;used&lowbar;dirs&lowbar;count</Literal> provide statistics about the use of the three
resources in a blocks group - The <Literal remap="tt">blocks</Literal>, the <Literal remap="tt">inodes</Literal> and the
<Literal remap="tt">directories</Literal>. I believe that they are used by the kernel for balancing
the load between the various blocks groups.
</Para>

<Para>
<Literal remap="tt">bg&lowbar;block&lowbar;bitmap</Literal> contains the block number of the <Literal remap="tt">block allocation
bitmap block</Literal>. This is used to allocate / deallocate each block in the
specific blocks group.
</Para>

<Para>
<Literal remap="tt">bg&lowbar;inode&lowbar;bitmap</Literal> is fully analogous to the previous variable - It
contains the block number of the <Literal remap="tt">inode allocation bitmap block</Literal>, which
is used to allocate / deallocate each specific inode in the filesystem.
</Para>

<Para>
<Literal remap="tt">bg&lowbar;inode&lowbar;table</Literal> contains the block number of the start of the
<Literal remap="tt">inode table of the current blocks group</Literal>. The <Literal remap="tt">inode table</Literal> is
just the actual inodes which are reserved for the current block.
</Para>

<Para>
The block bitmap block, inode bitmap block and the inode table are created
when the filesystem is created.
</Para>

<Para>
The group descriptors are placed one after the other. Together they make the
<Literal remap="tt">group descriptors table</Literal>.
</Para>

<Para>
Each blocks group contains the entire table of group descriptors in its
second block, right after the superblock. However, only the first copy (in
group 0) is actually used by the kernel. The other copies are there for
backup purposes and can be of use if the main copy gets corrupted.
</Para>

</Sect1>

<Sect1>
<Title>The block bitmap allocation block</Title>

<Para>
Each blocks group contains one special block which is actually a map of the
entire blocks in the group, with respect to their allocation status. Each
<Literal remap="tt">bit</Literal> in the block bitmap indicated whether a specific block in the
group is used or free.
</Para>

<Para>
The format is actually quite simple - Just view the entire block as a series
of bits. For example,
</Para>

<Para>
Suppose the block size is 1024 bytes. As such, there is a place for
1024*8=8192 blocks in a group block. This number is one of the fields in the
filesystem's <Literal remap="tt">superblock</Literal>, which will be explained later.
</Para>

<Para>

<ItemizedList>
<ListItem>

<Para>
	Block 0 in the blocks group is managed by bit 0 of byte 0 in the bitmap
block.
</Para>
</ListItem>
<ListItem>

<Para>
	Block 7 in the blocks group is managed by bit 7 of byte 0 in the bitmap
block.
</Para>
</ListItem>
<ListItem>

<Para>
	Block 8 in the blocks group is managed by bit 0 of byte 1 in the bitmap
block.
</Para>
</ListItem>
<ListItem>

<Para>
	Block 8191 in the blocks group is managed by bit 7 of byte 1023 in the
bitmap 	block.
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
A value of "<Literal remap="tt">1</Literal>" in the appropriate bit signals that the block is
allocated, while a value of "<Literal remap="tt">0</Literal>" signals that the block is
unallocated.
</Para>

<Para>
You will probably notice that typically, all the bits in a byte contain the
same value, making the byte's value <Literal remap="tt">0</Literal> or <Literal remap="tt">0ffh</Literal>. This is done by
the kernel on purpose in order to group related data in physically close
blocks, since the physical device is usually optimized to handle such a close
relationship.
</Para>

</Sect1>

<Sect1>
<Title>The inode allocation bitmap</Title>

<Para>
The format of the inode allocation bitmap block is exactly like the format of
the block allocation bitmap block. The explanation above is valid here, with
the work <Literal remap="tt">block</Literal> replaced by <Literal remap="tt">inode</Literal>. Typically, there are much less
inodes then blocks in a blocks group and thus only part of the inode bitmap
block is used. The number of inodes in a blocks group is another variable
which is listed in the <Literal remap="tt">superblock</Literal>.
</Para>

</Sect1>

<Sect1>
<Title>On the inode and the inode tables</Title>

<Para>
An inode is a main resource in the ext2 filesystem. It is used for various
purposes, but the main two are:

<ItemizedList>
<ListItem>

<Para>
	Support of files
</Para>
</ListItem>
<ListItem>

<Para>
	Support of directories
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
Each file, for example, will allocate one inode from the filesystem
resources.
</Para>

<Para>
An ext2 filesystem has a total number of available inodes which is determined
while creating the filesystem. When all the inodes are used, for example, you
will not be able to create an additional file even though there will still
be free blocks on the filesystem. 
</Para>

<Para>
Each inode takes up 128 bytes in the filesystem. By default, <Literal remap="tt">mke2fs</Literal>
reserves an inode for each 4096 bytes of the filesystem space.
</Para>

<Para>
The inodes are placed in several tables, each of which contains the same
number of inodes and is placed at a different blocks group. The goal is to
place inodes and their related files in the same blocks group because of
locality arguments.
</Para>

<Para>
The number of inodes in a blocks group is available in the superblock variable
<Literal remap="tt">s&lowbar;inodes&lowbar;per&lowbar;group</Literal>. For example, if there are 2000 inodes per group,
group 0 will contain the inodes 1-2000, group 2 will contain the inodes
2001-4000, and so on.
</Para>

<Para>
Each inode table is accessed from the group descriptor of the specific
blocks group which contains the table.
</Para>

<Para>
Follows the structure of an inode in Ext2fs:
</Para>

<Para>

<ProgramListing>
struct ext2_inode {
	__u16	i_mode;		/* File mode */
	__u16	i_uid;		/* Owner Uid */
	__u32	i_size;		/* Size in bytes */
	__u32	i_atime;	/* Access time */
	__u32	i_ctime;	/* Creation time */
	__u32	i_mtime;	/* Modification time */
	__u32	i_dtime;	/* Deletion Time */
	__u16	i_gid;		/* Group Id */
	__u16	i_links_count;	/* Links count */
	__u32	i_blocks;	/* Blocks count */
	__u32	i_flags;	/* File flags */
	union {
		struct {
			__u32  l_i_reserved1;
		} linux1;
		struct {
			__u32  h_i_translator;
		} hurd1;
		struct {
			__u32  m_i_reserved1;
		} masix1;
	} osd1;				/* OS dependent 1 */
	__u32	i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
	__u32	i_version;	/* File version (for NFS) */
	__u32	i_file_acl;	/* File ACL */
	__u32	i_size_high;	/* High 32bits of size */
	__u32	i_faddr;	/* Fragment address */
	union {
		struct {
			__u8	l_i_frag;	/* Fragment number */
			__u8	l_i_fsize;	/* Fragment size */
			__u16	i_pad1;
			__u32	l_i_reserved2[2];
		} linux2;
		struct {
			__u8	h_i_frag;	/* Fragment number */
			__u8	h_i_fsize;	/* Fragment size */
			__u16	h_i_mode_high;
			__u16	h_i_uid_high;
			__u16	h_i_gid_high;
			__u32	h_i_author;
		} hurd2;
		struct {
			__u8	m_i_frag;	/* Fragment number */
			__u8	m_i_fsize;	/* Fragment size */
			__u16	m_pad1;
			__u32	m_i_reserved2[2];
		} masix2;
	} osd2;				/* OS dependent 2 */
};
</ProgramListing>

</Para>

<Sect2>
<Title>The allocated blocks</Title>

<Para>
The basic functionality of an inode is to group together a series of
allocated blocks. There is no limitation on the allocated blocks - Each
block can be allocated to each inode. Nevertheless, block allocation will
usually be done in series to take advantage of the locality principle.
</Para>

<Para>
The inode is not always used in that way. I will now explain the allocation
of blocks, assuming that the current inode type indeed refers to a list of
allocated blocks.
</Para>

<Para>
It was found experimentally that many of the files in the filesystem are
actually quite small. To take advantage of this effect, the kernel provides
storage of up to 12 block numbers in the inode itself. Those blocks are
called <Literal remap="tt">direct blocks</Literal>. The advantage is that once the kernel has the
inode, it can directly access the file's blocks, without an additional disk
access. Those 12 blocks are directly specified in the variables
<Literal remap="tt">i&lowbar;block[0] to i&lowbar;block[11]</Literal>.
</Para>

<Para>
<Literal remap="tt">i&lowbar;block[12]</Literal> is the <Literal remap="tt">indirect block</Literal> - The block pointed by
i&lowbar;block&lsqb;12] will <Literal remap="tt">not</Literal> be a data block. Rather, it will just contain a
list of direct blocks. For example, if the block size is 1024 bytes, since
each block number is 4 bytes long, there will be place for 256 indirect
blocks. That is, block 13 till block 268 in the file will be accessed by the
<Literal remap="tt">indirect block</Literal> method. The penalty in this case, compared to the
direct blocks case, is that an additional access to the device is needed -
We need <Literal remap="tt">two</Literal> accesses to reach the required data block.
</Para>

<Para>
In much the same way, <Literal remap="tt">i&lowbar;block[13]</Literal> is the <Literal remap="tt">double indirect block</Literal>
and <Literal remap="tt">i&lowbar;block[14]</Literal> is the <Literal remap="tt">triple indirect block</Literal>.
</Para>

<Para>
<Literal remap="tt">i&lowbar;block[13]</Literal> points to a block which contains pointers to indirect
blocks. Each one of them is handled in the way described above.
</Para>

<Para>
In much the same way, the triple indirect block is just an additional level
of indirection - It will point to a list of double indirect blocks.
</Para>

</Sect2>

<Sect2>
<Title>The i&lowbar;mode variable</Title>

<Para>
The i&lowbar;mode variable is used to determine the <Literal remap="tt">inode type</Literal> and the
associated <Literal remap="tt">permissions</Literal>. It is best described by representing it as an
octal number. Since it is a 16 bit variable, there will be 6 octal digits.
Those are divided into two parts - The rightmost 4 digits and the leftmost 2
digits.
</Para>

<Sect3>
<Title>The rightmost 4 octal digits</Title>

<Para>
The rightmost 4 digits are <Literal remap="tt">bit options</Literal> - Each bit has its own
purpose.
</Para>

<Para>
The last 3 digits (Octal digits 0,1 and 2) are just the usual permissions,
in the known form <Literal remap="tt">rwxrwxrwx</Literal>. Digit 2 refers to the user, digit 1 to
the group and digit 2 to everyone else. They are used by the kernel to grant
or deny access to the object presented by this inode.
<FOOTNOTE>

<Para>
A <Literal remap="tt">smarter</Literal> permissions control is one of the enhancements planned for
Linux 1.3 - The ACL (Access Control Lists). Actually, from browsing of the
kernel source, some of the ACL handling is already done.
</Para>

</FOOTNOTE>

</Para>

<Para>
Bit number 9 signals that the file (I'll refer to the object presented by
the inode as file even though it can be a special device, for example) is
<Literal remap="tt">set VTX</Literal>. I still don't know what is the meaning of "VTX".
</Para>

<Para>
Bit number 10 signals that the file is <Literal remap="tt">set group id</Literal> - I don't know
exactly the meaning of the above either.
</Para>

<Para>
Bit number 11 signals that the file is <Literal remap="tt">set user id</Literal>, which means that
the file will run with an effective user id root.
</Para>

</Sect3>

<Sect3>
<Title>The leftmost two octal digits</Title>

<Para>
Note the the leftmost octal digit can only be 0 or 1, since the total number
of bits is 16.
</Para>

<Para>
Those digits, as opposed to the rightmost 4 digits, are not bit mapped
options. They determine the type of the "file" to which the inode belongs:

<ItemizedList>
<ListItem>

<Para>
	<Literal remap="tt">01</Literal> - The file is a <Literal remap="tt">FIFO</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">02</Literal> - The file is a <Literal remap="tt">character device</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">04</Literal> - The file is a <Literal remap="tt">directory</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">06</Literal> - The file is a <Literal remap="tt">block device</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">10</Literal> - The file is a <Literal remap="tt">regular file</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">12</Literal> - The file is a <Literal remap="tt">symbolic link</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">14</Literal> - The file is a <Literal remap="tt">socket</Literal>.
</Para>
</ListItem>

</ItemizedList>

</Para>

</Sect3>

</Sect2>

<Sect2>
<Title>Time and date</Title>

<Para>
Linux records the last time in which various operations occurred with the
file. The time and date are saved in the standard C library format - The
number of seconds which passed since 00:00:00 GMT, January 1, 1970. The
following times are recorded:

<ItemizedList>
<ListItem>

<Para>
	<Literal remap="tt">i&lowbar;ctime</Literal> - The time in which the inode was last allocated. In
other words, the time in which the file was created.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">i&lowbar;mtime</Literal> - The time in which the file was last modified.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">i&lowbar;atime</Literal> - The time in which the file was last accessed.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">i&lowbar;dtime</Literal> - The time in which the inode was deallocated. In
other words, the time in which the file was deleted.
</Para>
</ListItem>

</ItemizedList>

</Para>

</Sect2>

<Sect2>
<Title>i&lowbar;size</Title>

<Para>
<Literal remap="tt">i&lowbar;size</Literal> contains information about the size of the object presented by
the inode. If the inode corresponds to a regular file, this is just the size
of the file in bytes. In other cases, the interpretation of the variable is
different.
</Para>

</Sect2>

<Sect2>
<Title>User and group id</Title>

<Para>
The user and group id of the file are just saved in the variables
<Literal remap="tt">i&lowbar;uid</Literal> and <Literal remap="tt">i&lowbar;gid</Literal>.
</Para>

</Sect2>

<Sect2>
<Title>Hard links</Title>

<Para>
Later, when we'll discuss the implementation of directories, it will be
explained that each <Literal remap="tt">directory entry</Literal> points to an inode. It is quite
possible that a <Literal remap="tt">single inode</Literal> will be pointed to from <Literal remap="tt">several</Literal>
directories. In that case, we say that there exist <Literal remap="tt">hard links</Literal> to the
file - The file can be accessed from each of the directories.
</Para>

<Para>
The kernel keeps track of the number of hard links in the variable
<Literal remap="tt">i&lowbar;links&lowbar;count</Literal>. The variable is set to "1" when first allocating the
inode, and is incremented with each additional link. Deletion of a file will
delete the current directory entry and will decrement the number of links.
Only when this number reaches zero, the inode will be actually deallocated.
</Para>

<Para>
The name <Literal remap="tt">hard link</Literal> is used to distinguish between the alias method
described above, to another alias method called <Literal remap="tt">symbolic linking</Literal>,
which will be described later.
</Para>

</Sect2>

<Sect2>
<Title>The Ext2fs extended flags</Title>

<Para>
The ext2 filesystem associates additional flags with an inode. The extended
attributes are stored in the variable <Literal remap="tt">i&lowbar;flags</Literal>. <Literal remap="tt">i&lowbar;flags</Literal> is a 32
bit variable. Only the 7 rightmost bits are defined. Of them, only 5 bits
are used in version 0.5a of the filesystem. Specifically, the
<Literal remap="tt">undelete</Literal> and the <Literal remap="tt">compress</Literal> features are not implemented, and
are to be introduced in Linux 1.3 development.
</Para>

<Para>
The currently available flags are:

<ItemizedList>
<ListItem>

<Para>
	bit 0 - Secure deletion.

When this bit is on, the file's blocks are zeroed when the file is
deleted. With this bit off, they will just be left with their
original data when the inode is deallocated.
</Para>
</ListItem>
<ListItem>

<Para>
	bit 1 - Undelete.
	
This bit is not supported yet. It will be used to provide an
<Literal remap="tt">undelete</Literal> feature in future Ext2fs developments.
</Para>
</ListItem>
<ListItem>

<Para>
	bit 2 - Compress file.

This bit is also not supported. The plan is to offer "compression on
the fly" in future releases.
</Para>
</ListItem>
<ListItem>

<Para>
	bit 3 - Synchronous updates.

With this bit on, the meta-data will be written synchronously to the
disk, as if the filesystem was mounted with the "sync" mount option.
</Para>
</ListItem>
<ListItem>

<Para>
	bit 4 - Immutable file.

When this bit is on, the file will stay as it is - Can not be
changed, deleted, renamed, no hard links, etc, before the bit is
cleared.
</Para>
</ListItem>
<ListItem>

<Para>
	bit 5 - Append only file.
	
With this option active, data will only be appended to the file.
</Para>
</ListItem>
<ListItem>

<Para>
	bit 6 - Do not dump this file.

I think that this bit is used by the port of dump to linux (ported by
<Literal remap="tt">Remy Card</Literal>) to check if the file should not be dumped.
</Para>
</ListItem>

</ItemizedList>

</Para>

</Sect2>

<Sect2>
<Title>Symbolic links</Title>

<Para>
The <Literal remap="tt">hard links</Literal> presented above are just another pointers to the same
inode. The important aspect is that the inode number is <Literal remap="tt">fixed</Literal> when
the link is created. This means that the implementation details of the
filesystem are visible to the user - In a pure abstract usage of the
filesystem, the user should not care about inodes.
</Para>

<Para>
The above causes several limitations:

<ItemizedList>
<ListItem>

<Para>
	Hard links can be done only in the same filesystem. This is obvious,
since a hard link is just an inode number in some directory entry,
and the above elements are filesystem specific.
</Para>
</ListItem>
<ListItem>

<Para>
	You can not "replace" the file which is pointed to by the hard link
after the link creation. "Replacing" the file in one directory will
still leave the original file in the other directory - The
"replacement" will not deallocate the original inode, but rather
allocate another inode for the new version, and the directory entry
at the other place will just point to the old inode number.
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
<Literal remap="tt">Symbolic link</Literal>, on the other hand, is analyzed at <Literal remap="tt">run time</Literal>. A
symbolic link is just a <Literal remap="tt">pathname</Literal> which is accessible from an inode.
As such, it "speaks" in the language of the abstract filesystem. When the
kernel reaches a symbolic link, it will <Literal remap="tt">follow it in run time</Literal> using
its normal way of reaching directories.
</Para>

<Para>
As such, symbolic link can be made <Literal remap="tt">across different filesystems</Literal> and a
replacement of a file with a new version will automatically be active on all
its symbolic links.
</Para>

<Para>
The disadvantage is that hard link doesn't consume space except to a small
directory entry. Symbolic link, on the other hand, consumes at least an
inode, and can also consume one block.
</Para>

<Para>
When the inode is identified as a symbolic link, the kernel needs to find
the path to which it points.
</Para>

<Sect3>
<Title>Fast symbolic links</Title>

<Para>
When the pathname contains up to 64 bytes, it can be saved directly in the
inode, on the <Literal remap="tt">i&lowbar;block[0] - i&lowbar;block[15]</Literal> variables, since those are not
needed in that case. This is called <Literal remap="tt">fast</Literal> symbolic link. It is fast
because the pathname resolution can be done using the inode itself, without
accessing additional blocks. It is also economical, since it allocates only
an inode. The length of the pathname is stored in the <Literal remap="tt">i&lowbar;size</Literal>
variable.
</Para>

</Sect3>

<Sect3>
<Title>Slow symbolic links</Title>

<Para>
Starting from 65 bytes, additional block is allocated (by the use of
<Literal remap="tt">i&lowbar;block[0]</Literal>) and the pathname is stored in it. It is called slow
because the kernel needs to read additional block to resolve the pathname.
The length is again saved in <Literal remap="tt">i&lowbar;size</Literal>.
</Para>

</Sect3>

</Sect2>

<Sect2>
<Title>i&lowbar;version</Title>

<Para>
<Literal remap="tt">i&lowbar;version</Literal> is used with regard to Network File System. I don't know
its exact use.
</Para>

</Sect2>

<Sect2>
<Title>Reserved variables</Title>

<Para>
As far as I know, the variables which are connected to ACL and fragments
are not currently used. They will be supported in future versions.
</Para>

<Para>
Ext2fs is being ported to other operating systems. As far as I know,
at least in linux, the os dependent variables are also not used.
</Para>

</Sect2>

<Sect2>
<Title>Special reserved inodes</Title>

<Para>
The first ten inodes on the filesystem are special inodes:

<ItemizedList>
<ListItem>

<Para>
	Inode 1 is the <Literal remap="tt">bad blocks inode</Literal> - I believe that its data
blocks contain a list of the bad blocks in the filesystem, which
should not be allocated.
</Para>
</ListItem>
<ListItem>

<Para>
	Inode 2 is the <Literal remap="tt">root inode</Literal> - The inode of the root directory.
It is the starting point for reaching a known path in the filesystem.
</Para>
</ListItem>
<ListItem>

<Para>
	Inode 3 is the <Literal remap="tt">acl index inode</Literal>. Access control lists are
currently not supported by the ext2 filesystem, so I believe this
inode is not used.
</Para>
</ListItem>
<ListItem>

<Para>
	Inode 4 is the <Literal remap="tt">acl data inode</Literal>. Of course, the above applies
here too.
</Para>
</ListItem>
<ListItem>

<Para>
	Inode 5 is the <Literal remap="tt">boot loader inode</Literal>. I don't know its
usage.
</Para>
</ListItem>
<ListItem>

<Para>
	Inode 6 is the <Literal remap="tt">undelete directory inode</Literal>. It is also a
foundation for future enhancements, and is currently not used.
</Para>
</ListItem>
<ListItem>

<Para>
	Inodes 7-10 are <Literal remap="tt">reserved</Literal> and currently not used.
</Para>
</ListItem>

</ItemizedList>

</Para>

</Sect2>

</Sect1>

<Sect1>
<Title>Directories</Title>

<Para>
A directory is implemented in the same way as files are implemented (with
the direct blocks, indirect blocks, etc) - It is just a file which is
formatted with a special format - A list of directory entries.
</Para>

<Para>
Follows the definition of a directory entry:
</Para>

<Para>

<ProgramListing>
struct ext2_dir_entry {
	__u32	inode;			/* Inode number */
	__u16	rec_len;		/* Directory entry length */
	__u16	name_len;		/* Name length */
	char	name[EXT2_NAME_LEN];	/* File name */
};
</ProgramListing>

</Para>

<Para>
Ext2fs supports file names of varying lengths, up to 255 bytes. The
<Literal remap="tt">name</Literal> field above just contains the file name. Note that it is
<Literal remap="tt">not zero terminated</Literal>; Instead, the variable <Literal remap="tt">name&lowbar;len</Literal> contains
the length of the file name.
</Para>

<Para>
The variable <Literal remap="tt">rec&lowbar;len</Literal> is provided because the directory entries are
padded with zeroes so that the next entry will be in an offset which is
a multiplication of 4. The resulting directory entry size is stored in
<Literal remap="tt">rec&lowbar;len</Literal>. If the directory entry is the last in the block, it is
padded with zeroes till the end of the block, and rec&lowbar;len is updated
accordingly.
</Para>

<Para>
The <Literal remap="tt">inode</Literal> variable points to the inode of the above file.
</Para>

<Para>
Deletion of directory entries is done by appending of the deleted entry
space to the previous (or next, I am not sure) entry.
</Para>

</Sect1>

<Sect1>
<Title>The superblock</Title>

<Para>
The <Literal remap="tt">superblock</Literal> is a block which contains information which describes
the state of the internal filesystem.
</Para>

<Para>
The superblock is located at the <Literal remap="tt">fixed offset 1024</Literal> in the device. Its
length is 1024 bytes also.
</Para>

<Para>
The superblock, like the group descriptors, is copied on each blocks group
boundary for backup purposes. However, only the main copy is used by the
kernel.
</Para>

<Para>
The superblock contain three types of information:

<ItemizedList>
<ListItem>

<Para>
	Filesystem parameters which are fixed and which were determined when
this specific filesystem was created. Some of those parameters can
be different in different installations of the ext2 filesystem, but
can not be changed once the filesystem was created.
</Para>
</ListItem>
<ListItem>

<Para>
	Filesystem parameters which are tunable - Can always be changed.
</Para>
</ListItem>
<ListItem>

<Para>
	Information about the current filesystem state.
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
Follows the superblock definition:
</Para>

<Para>

<ProgramListing>
struct ext2_super_block {
	__u32	s_inodes_count;		/* Inodes count */
	__u32	s_blocks_count;		/* Blocks count */
	__u32	s_r_blocks_count;	/* Reserved blocks count */
	__u32	s_free_blocks_count;	/* Free blocks count */
	__u32	s_free_inodes_count;	/* Free inodes count */
	__u32	s_first_data_block;	/* First Data Block */
	__u32	s_log_block_size;	/* Block size */
	__s32	s_log_frag_size;	/* Fragment size */
	__u32	s_blocks_per_group;	/* # Blocks per group */
	__u32	s_frags_per_group;	/* # Fragments per group */
	__u32	s_inodes_per_group;	/* # Inodes per group */
	__u32	s_mtime;		/* Mount time */
	__u32	s_wtime;		/* Write time */
	__u16	s_mnt_count;		/* Mount count */
	__s16	s_max_mnt_count;	/* Maximal mount count */
	__u16	s_magic;		/* Magic signature */
	__u16	s_state;		/* File system state */
	__u16	s_errors;		/* Behaviour when detecting errors */
	__u16	s_pad;
	__u32	s_lastcheck;		/* time of last check */
	__u32	s_checkinterval;	/* max. time between checks */
	__u32	s_creator_os;		/* OS */
	__u32	s_rev_level;		/* Revision level */
	__u16	s_def_resuid;		/* Default uid for reserved blocks */
	__u16	s_def_resgid;		/* Default gid for reserved blocks */
	__u32	s_reserved[235];	/* Padding to the end of the block */
};
</ProgramListing>

</Para>

<Sect2>
<Title>superblock identification</Title>

<Para>
The ext2 filesystem's superblock is identified by the <Literal remap="tt">s&lowbar;magic</Literal> field.
The current ext2 magic number is 0xEF53. I presume that "EF" means "Extended
Filesystem". In versions of the ext2 filesystem prior to 0.2B, the magic
number was 0xEF51. Those filesystems are not compatible with the current
versions; Specifically, the group descriptors definition is different. I
doubt if there still exists such a installation.
</Para>

</Sect2>

<Sect2>
<Title>Filesystem fixed parameters</Title>

<Para>
By using the word <Literal remap="tt">fixed</Literal>, I mean fixed with respect to a particular
installation. Those variables are usually not fixed with respect to
different installations.
</Para>

<Para>
The <Literal remap="tt">block size</Literal> is determined by using the <Literal remap="tt">s&lowbar;log&lowbar;block&lowbar;size</Literal>
variable. The block size is 1024*pow (2,s&lowbar;log&lowbar;block&lowbar;size) and should be
between 1024 and 4096. The available options are 1024, 2048 and 4096.
</Para>

<Para>
<Literal remap="tt">s&lowbar;inodes&lowbar;count</Literal> contains the total number of available inodes.
</Para>

<Para>
<Literal remap="tt">s&lowbar;blocks&lowbar;count</Literal> contains the total number of available blocks.
</Para>

<Para>
<Literal remap="tt">s&lowbar;first&lowbar;data&lowbar;block</Literal> specifies in which of the <Literal remap="tt">device block</Literal> the
<Literal remap="tt">superblock</Literal> is present. The superblock is always present at the fixed
offset 1024, but the device block numbering can differ. For example, if the
block size is 1024, the superblock will be at <Literal remap="tt">block 1</Literal> with respect to
the device. However, if the block size is 4096, offset 1024 is included in
<Literal remap="tt">block 0</Literal> of the device, and in that case <Literal remap="tt">s&lowbar;first&lowbar;data&lowbar;block</Literal>
will contain 0. At least this is how I understood this variable.
</Para>

<Para>
<Literal remap="tt">s&lowbar;blocks&lowbar;per&lowbar;group</Literal> contains the number of blocks which are grouped
together as a blocks group.
</Para>

<Para>
<Literal remap="tt">s&lowbar;inodes&lowbar;per&lowbar;group</Literal> contains the number of inodes available in a group
block. I think that this is always the total number of inodes divided by the
number of blocks groups.
</Para>

<Para>
<Literal remap="tt">s&lowbar;creator&lowbar;os</Literal> contains a code number which specifies the operating
system which created this specific filesystem:

<ItemizedList>
<ListItem>

<Para>
	<Literal remap="tt">Linux</Literal> :-) is specified by the value <Literal remap="tt">0</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">Hurd</Literal> is specified by the value <Literal remap="tt">1</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">Masix</Literal> is specified by the value <Literal remap="tt">2</Literal>.
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
<Literal remap="tt">s&lowbar;rev&lowbar;level</Literal> contains the major version of the ext2 filesystem.
Currently this is always <Literal remap="tt">0</Literal>, as the most recent version is 0.5B. It
will probably take some time until we reach version 1.0.
</Para>

<Para>
As far as I know, fragments (sub-block allocations) are currently not
supported and hence a block is equal to a fragment. As a result,
<Literal remap="tt">s&lowbar;log&lowbar;frag&lowbar;size</Literal> and <Literal remap="tt">s&lowbar;frags&lowbar;per&lowbar;group</Literal> are always equal to
<Literal remap="tt">s&lowbar;log&lowbar;block&lowbar;size</Literal> and <Literal remap="tt">s&lowbar;blocks&lowbar;per&lowbar;group</Literal>, respectively.
</Para>

</Sect2>

<Sect2>
<Title>Ext2fs error handling</Title>

<Para>
The ext2 filesystem error handling is based on the following philosophy:

<OrderedList>
<ListItem>

<Para>
	Identification of problems is done by the kernel code.
</Para>
</ListItem>
<ListItem>

<Para>
	The correction task is left to an external utility, such as
<Literal remap="tt">e2fsck by Theodore Ts'o</Literal> for <Literal remap="tt">automatic</Literal> analysis and
correction, or perhaps <Literal remap="tt">debugfs by Theodore Ts'o</Literal> and
<Literal remap="tt">EXT2ED by myself</Literal>, for <Literal remap="tt">hand</Literal> analysis and correction.
</Para>
</ListItem>

</OrderedList>

</Para>

<Para>
The <Literal remap="tt">s&lowbar;state</Literal> variable is used by the kernel to pass the identification
result to third party utilities:

<ItemizedList>
<ListItem>

<Para>
	<Literal remap="tt">bit 0</Literal> of s&lowbar;state is reset when the partition is mounted and
set when the partition is unmounted. Thus, a value of 0 on an
unmounted filesystem means that the filesystem was not unmounted
properly - The filesystem is not "clean" and probably contains
errors.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">bit 1</Literal> of s&lowbar;state is set by the kernel when it detects an
error in the filesystem. A value of 0 doesn't mean that there isn't
an error in the filesystem, just that the kernel didn't find any.
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
The kernel behavior when an error is found is determined by the user tunable
parameter <Literal remap="tt">s&lowbar;errors</Literal>:

<ItemizedList>
<ListItem>

<Para>
	The kernel will ignore the error and continue if <Literal remap="tt">s&lowbar;errors=1</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	The kernel will remount the filesystem in read-only mode if
<Literal remap="tt">s&lowbar;errors=2</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	A kernel panic will be issued if <Literal remap="tt">s&lowbar;errors=3</Literal>.
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
The default behavior is to ignore the error.
</Para>

</Sect2>

<Sect2>
<Title>Additional parameters used by e2fsck</Title>

<Para>
Of-course, <Literal remap="tt">e2fsck</Literal> will check the filesystem if errors were detected
or if the filesystem is not clean.
</Para>

<Para>
In addition, each time the filesystem is mounted, <Literal remap="tt">s&lowbar;mnt&lowbar;count</Literal> is
incremented. When s&lowbar;mnt&lowbar;count reaches <Literal remap="tt">s&lowbar;max&lowbar;mnt&lowbar;count</Literal>, <Literal remap="tt">e2fsck</Literal>
will force a check on the filesystem even though it may be clean. It will
then zero s&lowbar;mnt&lowbar;count. <Literal remap="tt">s&lowbar;max&lowbar;mnt&lowbar;count</Literal> is a tunable parameter.
</Para>

<Para>
E2fsck also records the last time in which the file system was checked in
the <Literal remap="tt">s&lowbar;lastcheck</Literal> variable. The user tunable parameter
<Literal remap="tt">s&lowbar;checkinterval</Literal> will contain the number of seconds which are allowed
to pass since <Literal remap="tt">s&lowbar;lastcheck</Literal> until a check is forced. A value of
<Literal remap="tt">0</Literal> disables time-based check.
</Para>

</Sect2>

<Sect2>
<Title>Additional user tunable parameters</Title>

<Para>
<Literal remap="tt">s&lowbar;r&lowbar;blocks&lowbar;count</Literal> contains the number of disk blocks which are
reserved for root, the user whose id number is <Literal remap="tt">s&lowbar;def&lowbar;resuid</Literal> and the
group whose id number is <Literal remap="tt">s&lowbar;deg&lowbar;resgid</Literal>. The kernel will refuse to
allocate those last <Literal remap="tt">s&lowbar;r&lowbar;blocks&lowbar;count</Literal> if the user is not one of the
above. This is done so that the filesystem will usually not be 100&percnt; full,
since 100&percnt; full filesystems can affect various aspects of operation.
</Para>

<Para>
<Literal remap="tt">s&lowbar;def&lowbar;resuid</Literal> and <Literal remap="tt">s&lowbar;def&lowbar;resgid</Literal> contain the id of the user and
of the group who can use the reserved blocks in addition to root.
</Para>

</Sect2>

<Sect2>
<Title>Filesystem current state</Title>

<Para>
<Literal remap="tt">s&lowbar;free&lowbar;blocks&lowbar;count</Literal> contains the current number of free blocks
in the filesystem.
</Para>

<Para>
<Literal remap="tt">s&lowbar;free&lowbar;inodes&lowbar;count</Literal> contains the current number of free inodes in the
filesystem.
</Para>

<Para>
<Literal remap="tt">s&lowbar;mtime</Literal> contains the time at which the system was last mounted.
</Para>

<Para>
<Literal remap="tt">s&lowbar;wtime</Literal> contains the last time at which something was changed in the
filesystem.
</Para>

</Sect2>

</Sect1>

<Sect1>
<Title>Copyright</Title>

<Para>
This document contains source code which was taken from the Linux ext2
kernel source code, mainly from <FILENAME>/usr/include/linux/ext2&lowbar;fs.h</FILENAME>. Follows
the original copyright:
</Para>

<Para>

<ProgramListing>
/*
 *  linux/include/linux/ext2_fs.h
 *
 * Copyright (C) 1992, 1993, 1994, 1995
 * Remy Card (card@masi.ibp.fr)
 * Laboratoire MASI - Institut Blaise Pascal
 * Universite Pierre et Marie Curie (Paris VI)
 *
 *  from
 *
 *  linux/include/linux/minix_fs.h
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

</ProgramListing>

</Para>

</Sect1>

<Sect1>
<Title>Acknowledgments</Title>

<Para>
I would like to thank the following people, who were involved in the
design and implementation of the ext2 filesystem kernel code and support
utilities:

<ItemizedList>
<ListItem>

<Para>
	<Literal remap="tt">Remy Card</Literal>

Who designed, implemented and maintains the ext2 filesystem kernel
code, and some of the ext2 utilities. <Literal remap="tt">Remy Card</Literal> is also the
author 	of several helpful slides concerning the ext2 filesystem.
Specifically, he is the author of <Literal remap="tt">File Management in the Linux
Kernel</Literal> and of <Literal remap="tt">The Second Extended File System - Current
State, Future Development</Literal>.

</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">Wayne Davison</Literal>

Who designed the ext2 filesystem.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">Stephen Tweedie</Literal>

Who helped designing the ext2 filesystem kernel code and wrote the
slides <Literal remap="tt">Optimizations in File Systems</Literal>.
</Para>
</ListItem>
<ListItem>

<Para>
	<Literal remap="tt">Theodore Ts'o</Literal>

Who is the author of several ext2 utilities and of the ext2 library
<Literal remap="tt">libext2fs</Literal> (which I didn't use, simply because I didn't know
it exists when I started to work on my project).
</Para>
</ListItem>

</ItemizedList>

</Para>

<Para>
Lastly, I would like to thank, of-course, <Literal remap="tt">Linus Torvalds</Literal> and the
<Literal remap="tt">Linux community</Literal> for providing all of us with such a great operating
system.
</Para>

<Para>
Please contact me in a case of an error report, suggestions, or just about
anything concerning this document.
</Para>

<Para>
Enjoy,
</Para>

<Para>
Gadi Oxman &lt;tgud@tochnapc2.technion.ac.il&gt;
</Para>

<Para>
Haifa, August 95
</Para>

</Sect1>

</Article>