summaryrefslogtreecommitdiffstats
path: root/debian/README.Debian
diff options
context:
space:
mode:
Diffstat (limited to 'debian/README.Debian')
-rw-r--r--debian/README.Debian55
1 files changed, 55 insertions, 0 deletions
diff --git a/debian/README.Debian b/debian/README.Debian
new file mode 100644
index 0000000..5d6efe9
--- /dev/null
+++ b/debian/README.Debian
@@ -0,0 +1,55 @@
+ethtool for Debian
+------------------
+
+Most settings that can be controlled through ethtool can be specified
+in /etc/network/interfaces. They will then be applied to interfaces
+that are brought up automatically at boot time or using the 'ifup'
+command. The following settings are supported:
+
+Link mode (--change):
+ link-speed <speed>
+ link-duplex half|full
+
+Ethernet settings (--change):
+ ethernet-autoneg on|off|<mask>
+ ethernet-port <port>
+ ethernet-wol <mode> [<pass-key>]
+
+Driver control (--change):
+ driver-message-level <level>
+
+Ethernet flow control (--pause):
+ ethernet-pause-rx on|off
+ ethernet-pause-tx on|off
+ ethernet-pause-autoneg on|off
+
+Protocol offload (--offload):
+ offload-rx on|off
+ offload-tx on|off
+ offload-sg on|off
+ offload-tso on|off
+ offload-ufo on|off
+ offload-gso on|off
+ offload-lro on|off
+ (etc.)
+
+Hardware tuning (--coalesce, --ring):
+ hardware-irq-coalesce-adaptive-rx on|off
+ hardware-irq-coalesce-adaptive-tx on|off
+ hardware-irq-coalesce-rx-usecs <n>
+ hardware-irq-coalesce-rx-frames <n>
+ (etc.)
+ hardware-dma-ring-rx <size>
+ hardware-dma-ring-rx-mini <size>
+ hardware-dma-ring-rx-jumbo <size>
+ hardware-dma-ring-tx <size>
+
+Example:
+
+iface eth0 inet dhcp
+ link-speed 100
+ link-duplex full
+ ethernet-autoneg off
+ ethernet-wol s 46:65:62:69:61:6e
+
+ -- Ben Hutchings <ben@decadent.org.uk>, Sat, 4 Jun 2011 20:37:08 +0100