Adding upstream version 20230210.upstream/20230210upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1394 insertions, 0 deletions

diff --git a/usbdux/usbduxsigma_firmware.asm b/usbdux/usbduxsigma_firmware.asm
new file mode 100644
index 0000000..38f5f0e
--- /dev/null
+++ b/usbdux/usbduxsigma_firmware.asm
@@ -0,0 +1,1394 @@
+;   usbdux_firmware.asm
+;   Copyright (C) 2010,2015 Bernd Porr, mail@berndporr.me.uk
+;   For usbduxsigma.c 0.5+
+;
+;   This program is free software; you can redistribute it and/or modify
+;   it under the terms of the GNU General Public License as published by
+;   the Free Software Foundation; either version 2 of the License, or
+;   (at your option) any later version.
+;
+;   This program is distributed in the hope that it will be useful,
+;   but WITHOUT ANY WARRANTY; without even the implied warranty of
+;   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;   GNU General Public License for more details.
+;
+;   You should have received a copy of the GNU General Public License
+;   along with this program; if not, write to the Free Software
+;   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+;
+;
+; Firmware: usbduxsigma_firmware.asm for usbduxsigma.c
+; Description: University of Stirling USB DAQ & INCITE Technology Limited
+; Devices: [ITL] USB-DUX-SIGMA (usbduxsigma.ko)
+; Author: Bernd Porr <mail@berndporr.me.uk>
+; Updated: 20 Jul 2015
+; Status: testing
+;
+;;;
+;;;
+;;;
+	
+	.inc	fx2-include.asm
+
+;;; a couple of flags in high memory
+	.equ	CMD_FLAG,80h	; flag for the next in transfer
+	.equ	PWMFLAG,81h	; PWM on or off?
+	.equ	MAXSMPL,82H	; maximum number of samples, n channellist
+	.equ	MUXSG0,83H	; content of the MUXSG0 register
+	.equ	INTERVAL,88h	; uframe/frame interval
+	.equ	INTCTR,89h	; interval counter
+	.equ	DABUFFER,0F0h	; buffer with DA values
+
+;;; in precious low memory but accessible within one clock cycle
+	.equ	DPTRL,70H
+	.equ	DPTRH,71h
+	.equ	ASYNC_ON,72h
+	.equ	SMPLCTR,73h
+
+;;; actual code
+	.org	0000h		; after reset the processor starts here
+	ljmp	main		; jump to the main loop
+
+	.org	0003h
+	ljmp	isr0		; external interrupt 0: /DRY
+
+	.org	0043h		; the IRQ2-vector
+	ljmp	jmptbl		; irq service-routine
+
+	.org	0100h		; start of the jump table
+
+jmptbl:	ljmp	sudav_isr
+	nop
+	ljmp	sof_isr
+	nop
+	ljmp	sutok_isr
+	nop
+	ljmp	suspend_isr
+	nop
+	ljmp	usbreset_isr
+	nop
+	ljmp	hispeed_isr
+	nop
+	ljmp	ep0ack_isr
+	nop
+	ljmp	spare_isr
+	nop
+	ljmp	ep0in_isr
+	nop
+	ljmp	ep0out_isr
+	nop
+	ljmp	ep1in_isr
+	nop
+	ljmp	ep1out_isr
+	nop
+	ljmp	ep2_isr
+	nop
+	ljmp	ep4_isr
+	nop
+	ljmp	ep6_isr
+	nop
+	ljmp	ep8_isr
+	nop
+	ljmp	ibn_isr
+	nop
+	ljmp	spare_isr
+	nop
+	ljmp	ep0ping_isr
+	nop
+	ljmp	ep1ping_isr
+	nop
+	ljmp	ep2ping_isr
+	nop
+	ljmp	ep4ping_isr
+	nop
+	ljmp	ep6ping_isr
+	nop
+	ljmp	ep8ping_isr
+	nop
+	ljmp	errlimit_isr
+	nop
+	ljmp	spare_isr
+	nop
+	ljmp	spare_isr
+	nop
+	ljmp	spare_isr
+	nop
+	ljmp	ep2isoerr_isr
+	nop
+	ljmp	ep4isoerr_isr
+	nop
+	ljmp	ep6isoerr_isr
+	nop
+	ljmp	ep8isoerr_isr
+
+	
+	;; dummy isr
+sudav_isr:	
+sutok_isr:	
+suspend_isr:	
+usbreset_isr:	
+hispeed_isr:	
+ep0ack_isr:	
+spare_isr:	
+ep0in_isr:	
+ep0out_isr:	
+ibn_isr:	
+ep0ping_isr:	
+ep1ping_isr:	
+ep2ping_isr:	
+ep4ping_isr:	
+ep6ping_isr:	
+ep8ping_isr:	
+errlimit_isr:	
+ep2isoerr_isr:	
+ep4isoerr_isr:	
+ep6isoerr_isr:	
+ep8isoerr_isr:
+ep6_isr:
+ep2_isr:
+ep4_isr:	
+
+	push	dps
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+	push	acc
+	push	psw
+
+	;; clear the USB2 irq bit and return
+	mov	a,EXIF
+	clr	acc.4
+	mov	EXIF,a
+
+	pop	psw
+	pop	acc 
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl 
+	pop	dps
+	
+	reti
+
+
+ep1in_isr:	
+	push	dps
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+	push	acc
+	push	psw
+		
+	mov	dptr,#0E7C0h	; EP1in
+	mov	a,IOB		; get DIO D
+	movx	@dptr,a		; store it
+	inc	dptr		; next byte
+	mov	a,IOC		; get DIO C
+	movx	@dptr,a		; store it
+	inc	dptr		; next byte
+	mov	a,IOD		; get DIO B
+	movx	@dptr,a		; store it
+	inc	dptr		; next byte
+	mov	a,#0		; just zero
+	movx	@dptr,a		; pad it up
+
+	;; clear INT2
+	mov	a,EXIF		; FIRST clear the USB (INT2) interrupt request
+	clr	acc.4
+	mov	EXIF,a		; Note: EXIF reg is not 8051 bit-addressable
+
+	mov	DPTR,#EPIRQ	; 
+	mov	a,#00000100b	; clear the ep1in
+	movx	@DPTR,a
+
+	pop	psw
+	pop	acc 
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl 
+	pop	dps
+	reti
+
+
+
+;;; this is triggered when DRY goes low
+isr0:	
+	push	dps
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+	push	acc
+	push	psw
+	push	00h		; R0
+	push	01h		; R1
+	push	02h		; R2
+	push	03h		; R3
+	push	04h		; R4
+	push	05h		; R5
+	push	06h		; R6
+	push	07h		; R7
+
+	mov	a,ASYNC_ON
+	jz	noepsubmit
+
+	mov	DPS,#0
+	mov	dpl,DPTRL
+	mov	dph,DPTRH
+
+	lcall	readADCch	; read one channel
+
+	mov	DPTRL,dpl
+	mov	DPTRH,dph
+
+	mov	a,SMPLCTR
+	dec	a
+	mov	SMPLCTR,a
+	jnz	noepsubmit
+
+	mov	ASYNC_ON,#0
+
+	clr	IOA.7		; START = 0
+	
+	;; arm the endpoint and send off the data
+	mov	DPTR,#EP6BCH	; byte count H
+	mov	a,#0		; is zero
+	lcall	syncdelaywr	; wait until we can write again
+	
+	mov	r0,#MAXSMPL	; number of samples to transmit
+	mov	a,@r0		; get them
+	rl	a		; a=a*2
+	rl	a		; a=a*2
+	add	a,#4		; four bytes for DIO
+	mov	DPTR,#EP6BCL	; byte count L
+	lcall	syncdelaywr	; wait until we can write again
+
+noepsubmit:
+	pop	07h
+	pop	06h
+	pop	05h
+	pop	04h		; R4
+	pop	03h		; R3
+	pop	02h		; R2
+	pop	01h		; R1
+	pop	00h		; R0
+	pop	psw
+	pop	acc 
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl 
+	pop	dps
+
+	reti
+
+	
+		
+;;; main program
+;;; basically only initialises the processor and
+;;; then engages in an endless loop
+main:
+	mov	DPTR,#CPUCS	; CPU control register
+	mov	a,#00010000b	; 48Mhz
+	lcall	syncdelaywr
+
+        mov     dptr,#REVCTL
+        mov     a,#00000011b    ; allows skip
+        lcall   syncdelaywr
+
+	mov	dptr,#INTSETUP	; IRQ setup register
+	mov	a,#08h		; enable autovector
+	lcall	syncdelaywr
+
+	mov	dptr,#PORTCCFG
+	mov	a,#0
+	lcall	syncdelaywr
+
+	mov	IP,#01H		; int0 has highest interrupt priority
+	mov	EIP,#0		; all USB interrupts have low priority
+
+	lcall	initAD		; init the ports to the converters
+
+	lcall	initeps		; init the isochronous data-transfer
+
+;;; main loop, rest is done as interrupts
+mloop2:	nop
+
+;;; pwm
+	mov	r0,#PWMFLAG	; pwm on?
+	mov	a,@r0		; get info
+	jz	mloop2		; it's off
+
+	mov	a,GPIFTRIG	; GPIF status
+	anl	a,#80h		; done bit
+	jz	mloop2		; GPIF still busy
+
+        mov     a,#01h		; WR,EP4, 01 = EP4
+        mov     GPIFTRIG,a	; restart it
+
+	sjmp	mloop2		; loop for ever
+
+
+;;; initialise the ports for the AD-converter
+initAD:
+	mov	r0,#MAXSMPL	; length of channellist
+	mov	@r0,#0		; we don't want to accumlate samples
+
+	mov	ASYNC_ON,#0	; async enable
+
+	mov	r0,#DABUFFER
+	mov	@r0,#0
+
+	mov	OEA,#11100000b	; PortA7,A6,A5 Outputs
+	mov	IOA,#01100000b	; /CS = 1 and START = 0
+	mov	dptr,#IFCONFIG	; switch on clock on IFCLK pin
+	mov	a,#10100000b	; gpif, 30MHz, internal IFCLK -> 15MHz for AD
+	lcall	syncdelaywr
+
+	mov	SCON0,#013H	; ser rec en, TX/RX: stop, 48/12MHz=4MHz clock
+	
+	mov	dptr,#PORTECFG
+	mov	a,#00001000b	; special function for port E: RXD0OUT
+	lcall	syncdelaywr
+
+	ret
+
+
+;;; send a byte via SPI
+;;; content in a, dptr1 is changed
+;;; the lookup is done in dptr1 so that the normal dptr is not affected
+;;; important: /cs needs to be reset to 1 by the caller: IOA.5
+sendSPI:
+	inc	DPS
+	
+	;; bit reverse
+	mov	dptr,#swap_lut	; lookup table
+	movc 	a,@a+dptr	; reverse bits
+
+	;; clear interrupt flag, is used to detect
+	;; successful transmission
+	clr	SCON0.1		; clear interrupt flag
+
+	;; start transmission by writing the byte
+	;; in the transmit buffer
+	mov	SBUF0,a		; start transmission
+
+	;; wait for the end of the transmission
+sendSPIwait:
+	mov	a,SCON0		; get transmission status
+	jnb     ACC.1,sendSPIwait	; loop until transmitted
+
+	inc	DPS
+	
+	ret
+
+
+
+	
+;;; receive a byte via SPI
+;;; content in a, dptr is changed
+;;; the lookup is done in dptr1 so that the normal dptr is not affected
+;;; important: the /CS needs to be set to 1 by the caller via "setb IOA.5"
+recSPI:
+	inc	DPS
+	
+	clr	IOA.5		; /cs to 0	
+
+	;; clearning the RI bit starts reception of data
+	clr	SCON0.0
+
+recSPIwait:
+	;; RI goes back to 1 after the reception of the 8 bits
+	mov	a,SCON0		; get receive status
+	jnb	ACC.0,recSPIwait; loop until all bits received
+
+	;; read the byte from the buffer
+	mov	a,SBUF0		; get byte
+	
+	;; lookup: reverse the bits
+	mov	dptr,#swap_lut	; lookup table
+	movc 	a,@a+dptr	; reverse the bits
+
+	inc	DPS
+	
+	ret
+
+
+
+	
+;;; reads a register
+;;; register address in a
+;;; returns value in a
+registerRead:
+	anl	a,#00001111b	; mask out the index to the register
+	orl	a,#01000000b	; 010xxxxx indicates register read
+	clr	IOA.5		; ADC /cs to 0
+	lcall	sendSPI		; send the command over
+	lcall	recSPI		; read the contents back
+	setb	IOA.5		; ADC /cs to 1
+	ret
+
+
+
+;;; writes to a register
+;;; register address in a
+;;; value in r0
+registerWrite:
+	push	acc
+	anl	a,#00001111b	; mask out the index to the register
+	orl	a,#01100000b	; 011xxxxx indicates register write
+
+	clr	IOA.5		; ADC /cs to 0	
+
+	lcall	sendSPI		;
+	mov	a,r0
+	lcall	sendSPI
+
+	setb	IOA.5		; ADC /cs to 1
+	pop	acc
+
+	lcall	registerRead	; check if the data has arrived in the ADC
+	mov	0f0h,r0		; register B
+	cjne	a,0f0h,registerWrite ; something went wrong, try again
+	
+	ret
+
+
+
+;;; initilise the endpoints
+initeps:
+	mov	dptr,#FIFORESET
+	mov	a,#80H		
+	movx	@dptr,a		; reset all fifos
+	mov	a,#2	
+	movx	@dptr,a		; 
+	mov	a,#4		
+	movx	@dptr,a		; 
+	mov	a,#6		
+	movx	@dptr,a		; 
+	mov	a,#8		
+	movx	@dptr,a		; 
+	mov	a,#0		
+	movx	@dptr,a		; normal operat
+	
+	mov	DPTR,#EP2CFG
+	mov	a,#10010010b	; valid, out, double buff, iso
+	movx	@DPTR,a
+
+	mov	dptr,#EP2FIFOCFG
+	mov	a,#00000000b	; manual
+	movx	@dptr,a
+
+	mov	dptr,#EP2BCL	; "arm" it
+	mov	a,#00h
+	movx	@DPTR,a		; can receive data
+	lcall	syncdelay	; wait to sync
+	movx	@DPTR,a		; can receive data
+	lcall	syncdelay	; wait to sync
+	movx	@DPTR,a		; can receive data
+	lcall	syncdelay	; wait to sync
+	
+	mov	DPTR,#EP1OUTCFG
+	mov	a,#10100000b	; valid
+	movx	@dptr,a
+
+	mov	dptr,#EP1OUTBC	; "arm" it
+	mov	a,#00h
+	movx	@DPTR,a		; can receive data
+	lcall	syncdelay	; wait until we can write again
+	movx	@dptr,a		; make shure its really empty
+	lcall	syncdelay	; wait
+
+	mov	DPTR,#EP6CFG	; ISO data from here to the host
+	mov	a,#11010010b	; Valid
+	movx	@DPTR,a		; ISO transfer, double buffering
+
+	mov	DPTR,#EP8CFG	; EP8
+	mov	a,#11100000b	; BULK data from here to the host
+	movx	@DPTR,a		;
+
+	mov	dptr,#PORTACFG
+	mov	a,#1		; interrupt on pin A0
+	lcall	syncdelaywr
+
+	;; enable interrupts
+	mov	dptr,#EPIE	; interrupt enable
+	mov	a,#10001100b	; enable irq for ep1out,8,ep1in
+	movx	@dptr,a		; do it
+
+	mov	dptr,#EPIRQ	; clear IRQs
+	mov	a,#10001100b
+	movx	@dptr,a
+	
+        mov     DPTR,#USBIE	; USB int enables register
+        mov     a,#2            ; enables SOF (1ms/125us interrupt)
+        movx    @DPTR,a         ; 
+
+	setb	TCON.0		; make INT0 edge triggered, falling edge
+
+	mov	EIE,#00000001b	; enable INT2/USBINT in the 8051's SFR
+	mov	IE,#81h		; IE, enable all interrupts and INT0
+
+	ret
+
+
+;;; Reads one ADC channel from the converter and stores
+;;; the result at dptr
+readADCch:
+	;; reading data is done by just dropping /CS and start reading and
+	;; while keeping the IN signal to the ADC inactive
+	clr	IOA.5		; /cs to 0
+	
+	;; 1st byte: STATUS
+	lcall	recSPI		; index
+	movx	@dptr,a		; store the byte
+	inc	dptr		; increment pointer
+
+	;; 2nd byte: MSB
+	lcall	recSPI		; data
+	movx	@dptr,a
+	inc	dptr
+
+	;; 3rd byte: MSB-1
+	lcall	recSPI		; data
+	movx	@dptr,a
+	inc	dptr
+
+	;; 4th byte: LSB
+	lcall	recSPI		; data
+	movx	@dptr,a
+	inc	dptr
+	
+	;; got all bytes
+	setb	IOA.5		; /cs to 1
+	
+	ret
+
+	
+
+;;; interrupt-routine for SOF
+sof_isr:
+	push	dps
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+	push	acc
+	push	psw
+	push	00h		; R0
+	push	01h		; R1
+	push	02h		; R2
+	push	03h		; R3
+	push	04h		; R4
+	push	05h		; R5
+	push	06h		; R6
+	push	07h		; R7
+
+	mov	r0,#INTCTR	; interval counter
+	mov	a,@r0		; get the value
+	dec	a		; decrement
+	mov	@r0,a		; save it again
+	jz	sof_adc		; we do ADC functions
+	ljmp	epfull		; we skip all adc functions
+	
+sof_adc:
+	mov	r1,#INTERVAL	; get the interval
+	mov	a,@r1		; get it
+	mov	@r0,a		; save it in the counter
+	mov	a,EP2468STAT
+	anl	a,#20H		; full?
+	jnz	epfull		; EP6-buffer is full
+
+	mov	a,IOA		; conversion running?
+	jb	ACC.7,epfull
+
+	;; make sure that we are starting with the first channel
+	mov	r0,#MUXSG0	;
+	mov	a,@r0		; get config of MUXSG0
+	mov	r0,a
+	mov	a,#04H		; MUXSG0
+	lcall	registerWrite	; this resets the channel sequence
+
+	setb	IOA.7		; start converter, START = 1
+	
+	mov	dptr,#0f800h	; EP6 buffer
+	mov	a,IOD		; get DIO D
+	movx	@dptr,a		; store it
+	inc	dptr		; next byte
+	mov	a,IOC		; get DIO C
+	movx	@dptr,a		; store it
+	inc	dptr		; next byte
+	mov	a,IOB		; get DIO B
+	movx	@dptr,a		; store it
+	inc	dptr		; next byte
+	mov	a,#0		; just zero
+	movx	@dptr,a		; pad it up
+	inc	dptr		; algin along a 32 bit word
+	mov	DPTRL,dpl
+	mov	DPTRH,dph
+
+	mov	r0,#MAXSMPL
+	mov	a,@r0
+	mov	SMPLCTR,a
+
+	mov	ASYNC_ON,#1
+
+epfull:
+	;; do the D/A conversion
+	mov	a,EP2468STAT
+	anl	a,#01H		; empty
+	jnz	epempty		; nothing to get
+
+	mov	dptr,#0F000H	; EP2 fifo buffer
+	lcall	dalo		; conversion
+
+	mov	dptr,#EP2BCL	; "arm" it
+	mov	a,#00h
+	lcall	syncdelaywr	; wait for the rec to sync
+	lcall	syncdelaywr	; wait for the rec to sync
+
+epempty:
+	mov	a,IOA		; conversion running?
+	jb	ACC.7,sofend
+
+	lcall	DAsend
+
+sofend:	
+	;; clear INT2
+	mov	a,EXIF		; FIRST clear the USB (INT2) interrupt request
+	clr	acc.4
+	mov	EXIF,a		; Note: EXIF reg is not 8051 bit-addressable
+	
+	mov	DPTR,#USBIRQ	; points to the SOF
+	mov	a,#2		; clear the SOF
+	movx	@DPTR,a
+
+nosof:
+	pop	07h
+	pop	06h
+	pop	05h
+	pop	04h		; R4
+	pop	03h		; R3
+	pop	02h		; R2
+	pop	01h		; R1
+	pop	00h		; R0
+	pop	psw
+	pop	acc 
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl 
+	pop	dps
+	reti
+
+
+reset_ep8:
+	;; erase all data in ep8
+	mov	dptr,#FIFORESET
+	mov	a,#80H		; NAK
+	lcall	syncdelaywr
+	mov	dptr,#FIFORESET
+	mov	a,#8		; reset EP8
+	lcall	syncdelaywr
+	mov	dptr,#FIFORESET
+	mov	a,#0		; normal operation
+	lcall	syncdelaywr
+	ret
+
+
+reset_ep6:
+	;; throw out old data
+	mov	dptr,#FIFORESET
+	mov	a,#80H		; NAK
+	lcall	syncdelaywr
+	mov	dptr,#FIFORESET
+	mov	a,#6		; reset EP6
+	lcall	syncdelaywr
+	mov	dptr,#FIFORESET
+	mov	a,#0		; normal operation
+	lcall	syncdelaywr
+	ret
+
+
+;;; configure the ADC converter
+;;; the dptr points to the init data:
+;;; CONFIG 0,1,3,4,5,6
+;;; note that CONFIG2 is omitted
+configADC:	
+	clr	IOA.7		; stops ADC: START line of ADC = L
+	setb	IOA.5		; ADC /cs to 1
+
+	;; just in case something has gone wrong
+	nop
+	nop
+	nop
+
+	mov	a,#11000000b	; reset	the ADC
+	clr	IOA.5		; ADC /cs to 0	
+	lcall	sendSPI
+	setb	IOA.5		; ADC /cs to 1	
+
+	movx	a,@dptr		;
+	inc	dptr
+	mov	r0,a
+	mov	a,#00H		; CONFIG0
+	lcall	registerWrite
+
+	movx	a,@dptr		;
+	inc	dptr
+	mov	r0,a
+	mov	a,#01H		; CONFIG1
+	lcall	registerWrite
+
+	movx	a,@dptr		;
+	inc	dptr
+	mov	r0,a
+	mov	a,#03H		; MUXDIF
+	lcall	registerWrite
+
+	movx	a,@dptr		;
+	inc	dptr
+	mov	r0,#MUXSG0
+	mov	@r0,a		; store it for reset purposes
+	mov	r0,a
+	mov	a,#04H		; MUXSG0
+	lcall	registerWrite
+	
+	movx	a,@dptr		;
+	inc	dptr
+	mov	r0,a
+	mov	a,#05H		; MUXSG1
+	lcall	registerWrite
+	
+	movx	a,@dptr		;
+	inc	dptr
+	mov	r0,a
+	mov	a,#06H		; SYSRED
+	lcall	registerWrite
+
+	ret
+
+	
+;;; interrupt-routine for ep1out
+;;; receives the channel list and other commands
+ep1out_isr:
+	push	dps
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+	push	acc
+	push	psw
+	push	00h		; R0
+	push	01h		; R1
+	push	02h		; R2
+	push	03h		; R3
+	push	04h		; R4
+	push	05h		; R5
+	push	06h		; R6
+	push	07h		; R7
+
+	mov	dptr,#0E780h	; FIFO buffer of EP1OUT
+	movx	a,@dptr		; get the first byte
+	mov	r0,#CMD_FLAG	; pointer to the command byte
+	mov 	@r0,a		; store the command byte for ep8
+
+	mov	dptr,#ep1out_jmp; jump table for the different functions
+	rl	a		; multiply by 2: sizeof sjmp
+	jmp	@a+dptr		; jump to the jump table
+	;; jump table, corresponds to the command bytes defined
+	;; in usbdux.c
+ep1out_jmp:
+	sjmp	startadc	; a=0
+	sjmp	single_da	; a=1
+	sjmp	config_digital_b; a=2
+	sjmp	write_digital_b	; a=3
+	sjmp	initsgADchannel	; a=4
+	sjmp	nothing		; a=5
+	sjmp	nothing		; a=6
+	sjmp	pwm_on		; a=7
+	sjmp	pwm_off		; a=8
+	sjmp	startadcint	; a=9
+
+nothing:
+	ljmp	over_da
+
+pwm_on:
+	lcall	startPWM
+	sjmp	over_da
+
+pwm_off:
+	lcall	stopPWM
+	sjmp	over_da
+
+initsgADchannel:
+	mov	ASYNC_ON,#0
+	
+	mov	dptr,#0e781h	; FIFO buffer of EP1OUT
+	lcall	configADC	; configures the ADC esp sel the channel
+
+	lcall	reset_ep8	; reset FIFO: get rid of old bytes
+	;; Save new A/D data in EP8. This is the first byte
+	;; the host will read during an INSN. If there are
+	;; more to come they will be handled by the ISR of
+	;; ep8.
+	lcall	ep8_ops		; get A/D data
+		
+	sjmp	over_da
+
+startadcint:
+	mov	dptr,#0e781h	; FIFO buffer of EP1OUT from 2nd byte
+
+	movx	a,@dptr		; interval is the 1st byte
+	inc	dptr		; data pointer
+	sjmp	startadc2	; the other paramters as with startadc
+	
+;;; config AD:
+;;; we write to the registers of the A/D converter
+startadc:
+	mov	dptr,#0e781h	; FIFO buffer of EP1OUT from 2nd byte
+
+	mov	a,#1		; interval is 1 here all the time
+startadc2:	
+	mov	r0,#INTERVAL	; set it
+	mov	@r0,a
+	mov	r0,#INTCTR	; the counter is also just one
+	mov	@r0,a
+
+	movx	a,@dptr		; get length of channel list
+	inc	dptr
+	mov	r0,#MAXSMPL
+	mov	@r0,a 		; length of the channel list
+	mov	SMPLCTR,a
+
+	lcall	configADC	; configures all registers
+
+	mov	ASYNC_ON,#1	; async enable
+
+	lcall	reset_ep6	; reset FIFO
+	
+	;; load new A/D data into EP6
+	;; This must be done. Otherwise the ISR is never called.
+	;; The ISR is only called when data has _left_ the
+	;; ep buffer here it has to be refilled.
+	lcall	ep6_arm		; fill with dummy data
+	
+	sjmp	over_da
+
+;;; Single DA conversion. The 2 bytes are in the FIFO buffer
+single_da:
+	mov	dptr,#0e781h	; FIFO buffer of EP1OUT
+	lcall	dalo		; conversion
+	sjmp	over_da
+
+;;; configure the port B as input or output (bitwise)
+config_digital_b:
+	mov	dptr,#0e781h	; FIFO buffer of EP1OUT
+	movx	a,@dptr		; get the second byte
+	inc	dptr
+	mov	OEB,a		; set the output enable bits
+	movx	a,@dptr		; get the second byte
+	inc	dptr
+	mov	OEC,a
+	movx	a,@dptr		; get the second byte
+	inc	dptr
+	mov	OED,a
+	sjmp	over_da
+	
+;;; Write one byte to the external digital port B
+;;; and prepare for digital read
+write_digital_b:
+	mov	dptr,#0e781h	; FIFO buffer of EP1OUT
+	movx	a,@dptr		; command[1]
+	inc	dptr
+	mov	OEB,a		; output enable
+	movx	a,@dptr		; command[2]
+	inc	dptr
+	mov	OEC,a
+	movx	a,@dptr		; command[3]
+	inc	dptr
+	mov	OED,a 
+	movx	a,@dptr		; command[4]
+	inc	dptr
+	mov	IOB,a		;
+	movx	a,@dptr		; command[5]
+	inc	dptr
+	mov	IOC,a
+	movx	a,@dptr		; command[6]
+	inc	dptr
+	mov	IOD,a
+
+	lcall	reset_ep8	; reset FIFO of ep 8
+
+	;; fill ep8 with new data from port B
+	;; When the host requests the data it's already there.
+	;; This must be so. Otherwise the ISR is not called.
+	;; The ISR is only called when a packet has been delivered
+	;; to the host. Thus, we need a packet here in the
+	;; first instance.
+	lcall	ep8_ops		; get digital data
+
+	;; 
+	;; for all commands the same
+over_da:	
+	mov	dptr,#EP1OUTBC
+	mov	a,#00h
+	lcall	syncdelaywr	; arm
+	lcall	syncdelaywr	; arm
+	lcall	syncdelaywr	; arm
+
+	;; clear INT2
+	mov	a,EXIF		; FIRST clear the USB (INT2) interrupt request
+	clr	acc.4
+	mov	EXIF,a		; Note: EXIF reg is not 8051 bit-addressable
+
+	mov	DPTR,#EPIRQ	; 
+	mov	a,#00001000b	; clear the ep1outirq
+	movx	@DPTR,a
+
+	pop	07h
+	pop	06h
+	pop	05h
+	pop	04h		; R4
+	pop	03h		; R3
+	pop	02h		; R2
+	pop	01h		; R1
+	pop	00h		; R0
+	pop	psw
+	pop	acc 
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl 
+	pop	dps
+	reti
+
+
+	
+;;; save all DA channels from the endpoint buffer in a local buffer
+dalo:
+	movx	a,@dptr		; number of bytes to send out
+	inc	dptr		; pointer to the first byte
+	mov	r1,#DABUFFER	; buffer for DA values
+	mov	@r1,a		; save it
+	inc	r1		; inc pointer to local buffer
+	mov	r0,a		; counter
+nextDAlo:	
+	movx	a,@dptr		; get the byte
+	inc	dptr		; point to the high byte
+	mov	@r1,a		; save it in the buffer
+	inc	r1
+	movx	a,@dptr		; get the channel number
+	inc	dptr		; get ready for the next channel
+	mov	@r1,a		; save it
+	inc	r1
+	djnz	r0,nextDAlo	; next channel
+	ret
+
+
+;;; write to the DA converter
+DAsend:
+	mov	r1,#DABUFFER	; buffer of the DA values
+	mov	a,@r1		; get the channel count
+	jz	DAret		; nothing to do
+	inc	r1		; pointer to the first byte
+	mov	r0,a		; counter
+nextDA:	
+	mov	a,@r1		; get the byte
+	inc	r1		; point to the high byte
+	mov	r3,a		; store in r3 for writeDA
+	mov	a,@r1		; get the channel number
+	inc	r1		; get ready for the next channel
+	push	1		; is modified in the subroutine
+	lcall	writeDA		; write value to the DAC
+	pop	1		; get the pointer back
+	djnz	r0,nextDA	; next channel
+DAret:	
+	ret
+
+
+
+;;; D/A-conversion:
+;;; channel number in a
+;;; value in r3
+writeDA:
+	anl	a,#00000011b	; 4 channels
+	mov	r1,#6		; the channel number needs to be shifted up
+writeDA2:
+	rl	a		; bit shift to the left
+	djnz	r1,writeDA2	; do it 6 times
+	orl	a,#00010000b	; update outputs after write
+	mov	r2,a		; backup
+	mov	a,r3		; get byte
+	anl	a,#11110000b	; get the upper nibble
+	mov	r1,#4		; shift it up to the upper nibble
+writeDA3:
+	rr	a		; shift to the upper to the lower
+	djnz	r1,writeDA3
+	orl	a,r2		; merge with the channel info
+	clr	IOA.6		; /SYNC (/CS) of the DA to 0
+	lcall	sendSPI		; send it out to the SPI
+	mov	a,r3		; get data again
+	anl	a,#00001111b	; get the lower nibble
+	mov	r1,#4		; shift that to the upper
+writeDA4:
+	rl	a
+	djnz	r1,writeDA4
+	anl	a,#11110000b	; make sure that's empty
+	lcall	sendSPI
+	setb	IOA.6		; /SYNC (/CS) of the DA to 1
+noDA:	ret
+	
+
+
+;;; arm ep6: this is just a dummy arm to get things going
+ep6_arm:
+	mov	DPTR,#EP6BCH	; byte count H
+	mov	a,#0		; is zero
+	lcall	syncdelaywr	; wait until the length has arrived
+	
+	mov	DPTR,#EP6BCL	; byte count L
+	mov	a,#1		; is one
+	lcall	syncdelaywr	; wait until the length has been proc
+	ret
+	
+
+
+;;; converts one analog/digital channel and stores it in EP8
+;;; also gets the content of the digital ports B,C and D depending on
+;;; the COMMAND flag
+ep8_ops:
+	mov	dptr,#0fc01h	; ep8 fifo buffer
+	clr	a		; high byte
+	movx	@dptr,a		; set H=0
+	mov	dptr,#0fc00h	; low byte
+	mov	r0,#CMD_FLAG
+	mov	a,@r0
+	movx	@dptr,a		; save command byte
+
+	mov	dptr,#ep8_jmp	; jump table for the different functions
+	rl	a		; multiply by 2: sizeof sjmp
+	jmp	@a+dptr		; jump to the jump table
+	;; jump table, corresponds to the command bytes defined
+	;; in usbdux.c
+ep8_jmp:
+	sjmp	ep8_err		; a=0, err
+	sjmp	ep8_err		; a=1, err
+	sjmp	ep8_err		; a=2, err
+	sjmp	ep8_dio		; a=3, digital read
+	sjmp	ep8_sglchannel	; a=4, analog A/D
+	sjmp	ep8_err		; a=5, err
+	sjmp	ep8_err		; a=6, err
+
+	;; read one A/D channel
+ep8_sglchannel:
+	setb	IOA.7		; start converter, START = 1
+	;; we do polling: we wait until DATA READY is zero
+sglchwait:	
+	mov	a,IOA		; get /DRDY
+	jb	ACC.0,sglchwait	; wait until data ready (DRDY=0)
+	mov 	DPTR,#0fc01h	; EP8 FIFO
+	lcall	readADCch	; get one reading
+	clr	IOA.7		; stop the converter, START = 0
+
+	sjmp	ep8_send	; send the data
+
+	;; read the digital lines
+ep8_dio:	
+	mov 	DPTR,#0fc01h	; store the contents of port B
+	mov	a,IOB		; in the next
+	movx	@dptr,a		; entry of the buffer
+	inc	dptr
+	mov	a,IOC		; port C
+	movx	@dptr,a		; next byte of the EP
+	inc	dptr
+	mov	a,IOD
+	movx	@dptr,a		; port D
+	
+ep8_send:	
+	mov	DPTR,#EP8BCH	; byte count H
+	mov	a,#0		; is zero
+	lcall	syncdelaywr
+	
+	mov	DPTR,#EP8BCL	; byte count L
+	mov	a,#10H		; 16 bytes, bec it's such a great number...
+	lcall	syncdelaywr	; send the data over to the host
+
+ep8_err:	
+	ret
+
+
+
+;;; EP8 interrupt is the endpoint which sends data back after a command
+;;; The actual command fills the EP buffer already
+;;; but for INSNs we need to deliver more data if the count > 1
+ep8_isr:	
+	push	dps
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+	push	acc
+	push	psw
+	push	00h		; R0
+	push	01h		; R1
+	push	02h		; R2
+	push	03h		; R3
+	push	04h		; R4
+	push	05h		; R5
+	push	06h		; R6
+	push	07h		; R7
+		
+	lcall	ep8_ops
+	
+	;; clear INT2
+	mov	a,EXIF		; FIRST clear the USB (INT2) interrupt request
+	clr	acc.4
+	mov	EXIF,a		; Note: EXIF reg is not 8051 bit-addressable
+
+	mov	DPTR,#EPIRQ	; 
+	mov	a,#10000000b	; clear the ep8irq
+	movx	@DPTR,a
+
+	pop	07h
+	pop	06h
+	pop	05h
+	pop	04h		; R4
+	pop	03h		; R3
+	pop	02h		; R2
+	pop	01h		; R1
+	pop	00h		; R0
+	pop	psw
+	pop	acc 
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl 
+	pop	dps
+	reti
+
+
+
+;;; GPIF waveform for PWM
+waveform:
+	;;      0     1     2     3     4     5     6     7(not used)
+	;; len (gives 50.007Hz)
+	.db	195,  195,  195,  195,  195,  195,  1,    1
+
+	;; opcode
+	.db	002H, 006H, 002H, 002H, 002H, 002H, 002H, 002H
+	
+	;; out
+	.db	0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH
+
+	;; log
+	.db	000H, 000H, 000H, 000H, 000H, 000H, 000H, 000H
+
+
+stopPWM:
+	mov	r0,#PWMFLAG	; flag for PWM
+	mov	a,#0		; PWM (for the main loop)
+	mov	@r0,a		; set it
+
+	mov	dptr,#IFCONFIG	; switch off GPIF
+	mov	a,#10100000b	; gpif, 30MHz, internal IFCLK
+	lcall	syncdelaywr
+	ret
+	
+
+;;; init PWM
+startPWM:
+	mov	dptr,#IFCONFIG	; switch on IFCLK signal
+	mov	a,#10100010b	; gpif, 30MHz, internal IFCLK
+	lcall	syncdelaywr
+
+	mov	OEB,0FFH	; output to port B
+
+	mov	DPTR,#EP4CFG
+	mov	a,#10100000b	; valid, out, bulk
+	movx	@DPTR,a
+
+	;; reset the endpoint
+	mov	dptr,#FIFORESET
+	mov	a,#80h		; NAK
+	lcall	syncdelaywr
+	mov	a,#84h		; reset EP4 + NAK
+	lcall	syncdelaywr
+	mov	a,#0		; normal op
+	lcall	syncdelaywr
+
+	mov	dptr,#EP4BCL
+	mov	a,#0H		; discard packets
+	lcall	syncdelaywr	; empty FIFO buffer
+	lcall	syncdelaywr	; empty FIFO buffer
+
+	;; aborts all transfers by the GPIF
+	mov	dptr,#GPIFABORT
+	mov	a,#0ffh		; abort all transfers
+	lcall	syncdelaywr
+
+	;; wait for GPIF to finish
+wait_f_abort:
+	mov	a,GPIFTRIG	; GPIF status
+	anl	a,#80h		; done bit
+	jz	wait_f_abort	; GPIF busy
+
+        mov     dptr,#GPIFCTLCFG
+        mov     a,#10000000b    ; tri state for CTRL
+        lcall   syncdelaywr
+
+        mov     dptr,#GPIFIDLECTL
+        mov     a,#11110000b    ; all CTL outputs low
+        lcall   syncdelaywr
+
+	;; abort if FIFO is empty
+        mov     a,#00000001b    ; abort if empty
+        mov     dptr,#EP4GPIFFLGSEL
+        lcall   syncdelaywr
+
+	;; 
+        mov     a,#00000001b    ; stop if GPIF flg
+        mov     dptr,#EP4GPIFPFSTOP
+        lcall   syncdelaywr
+
+	;; transaction counter
+	mov	a,#0ffH
+	mov	dptr,#GPIFTCB3
+	lcall	syncdelaywr
+
+	;; transaction counter
+	mov	a,#0ffH
+	mov	dptr,#GPIFTCB2
+	lcall	syncdelaywr
+
+	;; transaction counter
+	mov	a,#0ffH		; 512 bytes
+	mov	dptr,#GPIFTCB1
+	lcall	syncdelaywr
+
+	;; transaction counter
+	mov	a,#0ffH
+	mov	dptr,#GPIFTCB0
+	lcall	syncdelaywr
+
+	;; RDY pins. Not used here.
+        mov     a,#0
+        mov     dptr,#GPIFREADYCFG
+        lcall   syncdelaywr
+
+	;; drives the output in the IDLE state
+        mov     a,#1
+        mov     dptr,#GPIFIDLECS
+        lcall   syncdelaywr
+
+	;; direct data transfer from the EP to the GPIF
+	mov	dptr,#EP4FIFOCFG
+	mov	a,#00010000b	; autoout=1, byte-wide
+	lcall	syncdelaywr
+
+	;; waveform 0 is used for FIFO out
+	mov	dptr,#GPIFWFSELECT
+	mov	a,#00000000b
+	movx	@dptr,a
+	lcall	syncdelay
+
+	;; transfer the delay byte from the EP to the waveform
+	mov	dptr,#0e781h	; EP1 buffer
+	movx	a,@dptr		; get the delay
+	mov	dptr,#waveform	; points to the waveform
+	mov	r2,#6		; fill 6 bytes
+timloop:
+	movx	@dptr,a		; save timing in a xxx
+	inc	dptr
+	djnz	r2,timloop	; fill the 6 delay bytes
+
+	;; load waveform
+        mov     AUTOPTRH2,#0E4H ; XDATA0H
+        lcall   syncdelay
+        mov     AUTOPTRL2,#00H  ; XDATA0L
+        lcall   syncdelay
+
+	mov	dptr,#waveform	; points to the waveform
+	
+        mov     AUTOPTRSETUP,#7 ; autoinc and enable
+        lcall   syncdelay
+
+        mov     r2,#20H         ; 32 bytes to transfer
+
+wavetr:
+        movx    a,@dptr
+	inc	dptr
+	push	dpl
+	push	dph
+	push	dpl1
+	push	dph1
+        mov     dptr,#XAUTODAT2
+        movx    @dptr,a
+        lcall   syncdelay
+	pop	dph1 
+	pop	dpl1
+	pop	dph 
+	pop	dpl
+        djnz    r2,wavetr
+
+	mov	dptr,#OUTPKTEND
+	mov	a,#084H
+	lcall	syncdelaywr
+	lcall	syncdelaywr
+
+	mov	r0,#PWMFLAG	; flag for PWM
+	mov	a,#1		; PWM (for the main loop)
+	mov	@r0,a		; set it
+
+	ret
+
+	
+
+;; need to delay every time the byte counters
+;; for the EPs have been changed.
+
+syncdelay:
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	ret
+
+syncdelaywr:
+	movx	@dptr,a
+	lcall	syncdelay
+	ret
+
+
+
+	.org	1F00h		; lookup table at the end of memory
+
+swap_lut:
+.db 0,128,64,192,32,160,96,224,16,144,80,208,48,176,112,240,8,136
+.db 72,200,40,168,104,232,24,152,88,216,56,184,120,248,4,132,68,196,36,164,100
+.db 228,20,148,84,212,52,180,116,244,12,140,76,204,44,172,108,236,28,156,92,220
+.db 60,188,124,252,2,130,66,194,34,162,98,226,18,146,82,210,50,178,114,242,10
+.db 138,74,202,42,170,106,234,26,154,90,218,58,186,122,250,6,134,70,198,38,166
+.db 102,230,22,150,86,214,54,182,118,246,14,142,78,206,46,174,110,238,30,158,94
+.db 222,62,190,126,254,1,129,65,193,33,161,97,225,17,145,81,209,49,177,113,241,9
+.db 137,73,201,41,169,105,233,25,153,89,217,57,185,121,249,5,133,69,197,37,165
+.db 101,229,21,149,85,213,53,181,117,245,13,141,77,205,45,173,109,237,29,157,93
+.db 221,61,189,125,253,3,131,67,195,35,163,99,227,19,147,83,211,51,179,115,243,11
+.db 139,75,203,43,171,107,235,27,155,91,219,59,187,123,251,7,135,71,199,39,167
+.db 103,231,23,151,87,215,55,183,119,247,15,143,79,207,47,175,111,239,31,159,95
+.db 223,63,191,127,255
+
+
+
+	
+.End
+
+