Adding upstream version 3.2.1+dfsg.upstream/3.2.1+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 198 insertions, 0 deletions

diff --git a/raddb/sites-available/abfab-tr-idp b/raddb/sites-available/abfab-tr-idp
new file mode 100644
index 0000000..be98568
--- /dev/null
+++ b/raddb/sites-available/abfab-tr-idp
@@ -0,0 +1,198 @@
+#
+#	This file represents a server that is implementing an identity
+#	provider for GSS-EAP (RFC 7055) using the trust router
+#	protocol for dynamic realm discovery.  Any ABFAB identity
+#	provider is also an ABFAB relying party proxy.
+#
+#	This file does not include a TLS listener; see abfab-tls for a simple
+#	example of a RADSEC listener for ABFAB.
+#
+#	$Id$
+#
+
+server abfab-idp {
+authorize {
+	psk_authorize
+	abfab_client_check
+	filter_username
+	preprocess
+
+	#  If you intend to use CUI and you require that the Operator-Name
+	#  be set for CUI generation and you want to generate CUI also
+	#  for your local clients then uncomment the operator-name
+	#  below and set the operator-name for your clients in clients.conf
+#	operator-name
+
+	#
+	#  If you want to generate CUI for some clients that do not
+	#  send proper CUI requests, then uncomment the
+	#  cui below and set "add_cui = yes" for these clients in clients.conf
+#	cui
+
+	#
+	# Do RFC 7542 bang path routing. If you want to only do standard
+	# RADIUS NAI routing, comment out the below line.
+	rfc7542
+
+	#  Standard RADIUS NAI routing
+	if (!updated) {
+		suffix {
+			updated = 1
+			noop = reject
+		}
+	}
+
+	eap {
+		ok = return
+	}
+
+	expiration
+	logintime
+}
+
+authenticate {
+	#
+	#  Allow EAP authentication.
+	eap
+}
+
+#  Post-Authentication
+#  Once we KNOW that the user has been authenticated, there are
+#  additional steps we can take.
+post-auth {
+	#
+	#  For EAP-TTLS and PEAP, add the cached attributes to the reply.
+	#  The "session-state" attributes are automatically cached when
+	#  an Access-Challenge is sent, and automatically retrieved
+	#  when an Access-Request is received.
+	#
+	#  The session-state attributes are automatically deleted after
+	#  an Access-Reject or Access-Accept is sent.
+	#
+	#  If both session-state and reply contain a User-Name attribute, remove
+	#  the one in the reply if it is just a copy of the one in the request, so
+	#  we don't end up with two User-Name attributes.
+
+	if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) {
+		update reply {
+			&User-Name !* ANY
+		}
+	}
+	update {
+		&reply: += &session-state:
+	}
+
+	#  Create the CUI value and add the attribute to Access-Accept.
+	#  Uncomment the line below if *returning* the CUI.
+#	cui
+
+	#
+	#  If you want to have a log of authentication replies,
+	#  un-comment the following line, and enable the
+	#  'detail reply_log' module.
+#	reply_log
+
+	#
+	#  After authenticating the user, do another SQL query.
+	#
+	#  See "Authentication Logging Queries" in `mods-config/sql/main/$driver/queries.conf`
+	-sql
+
+	#
+	#  Un-comment the following if you want to modify the user's object
+	#  in LDAP after a successful login.
+	#
+#	ldap
+
+	# For Exec-Program and Exec-Program-Wait
+	exec
+	#  Remove reply message if the response contains an EAP-Message
+	remove_reply_message_if_eap
+	#  Access-Reject packets are sent through the REJECT sub-section of the
+	#  post-auth section.
+	#
+	#  Add the ldap module name (or instance) if you have set
+	#  'edir = yes' in the ldap module configuration
+	#
+	Post-Auth-Type REJECT {
+		# log failed authentications in SQL, too.
+		-sql
+		attr_filter.access_reject
+
+		# Insert EAP-Failure message if the request was
+		# rejected by policy instead of because of an
+		# authentication failure And already has an EAP message
+		# For non-ABFAB, we insert the failure all the time, but for ABFAB
+		# It's more desirable to preserve reply-message when we can
+		if (&reply:Eap-Message) {
+			eap
+		}
+
+		#  Remove reply message if the response contains an EAP-Message
+		remove_reply_message_if_eap
+	}
+}
+#
+#  When the server decides to proxy a request to a home server,
+#  the proxied request is first passed through the pre-proxy
+#  stage.  This stage can re-write the request, or decide to
+#  cancel the proxy.
+#
+#  Only a few modules currently have this method.
+#
+pre-proxy {
+	# Before proxing the request add an Operator-Name attribute identifying
+	# if the operator-name is found for this client.
+	# No need to uncomment this if you have already enabled this in
+	# the authorize section.
+#	operator-name
+
+	#  The client requests the CUI by sending a CUI attribute
+	#  containing one zero byte.
+	#  Uncomment the line below if *requesting* the CUI.
+#	cui
+
+	#  Uncomment the following line if you want to change attributes
+	#  as defined in the preproxy_users file.
+#	files
+
+	#  Uncomment the following line if you want to filter requests
+	#  sent to remote servers based on the rules defined in the
+	#  'attrs.pre-proxy' file.
+#	attr_filter.pre-proxy
+
+	#  If you want to have a log of packets proxied to a home
+	#  server, un-comment the following line, and the
+	#  'detail pre_proxy_log' section, above.
+#	pre_proxy_log
+}
+#
+#  When the server receives a reply to a request it proxied
+#  to a home server, the request may be massaged here, in the
+#  post-proxy stage.
+#
+post-proxy {
+
+	#  If you want to have a log of replies from a home server,
+	#  un-comment the following line, and the 'detail post_proxy_log'
+	#  section, above.
+#	post_proxy_log
+
+	#  Uncomment the following line if you want to filter replies from
+	#  remote proxies based on the rules defined in the 'attrs' file.
+#	attr_filter.post-proxy
+
+	#
+	#  If you are proxying LEAP, you MUST configure the EAP
+	#  module, and you MUST list it here, in the post-proxy
+	#  stage.
+	#
+	#  You MUST also use the 'nostrip' option in the 'realm'
+	#  configuration.  Otherwise, the User-Name attribute
+	#  in the proxied request will not match the user name
+	#  hidden inside of the EAP packet, and the end server will
+	#  reject the EAP request.
+	#
+	eap
+}
+}