diff options
Diffstat (limited to 'raddb/mods-config/files/dhcp')
| -rw-r--r-- | raddb/mods-config/files/dhcp | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/raddb/mods-config/files/dhcp b/raddb/mods-config/files/dhcp new file mode 100644 index 0000000..04f37b5 --- /dev/null +++ b/raddb/mods-config/files/dhcp @@ -0,0 +1,153 @@ +# +# This configuration file that may be used by multiple instances of rlm_files +# to set reply and control options for defining DHCP replies. +# +# The content of this file is all made up and needs to be set appropriate to +# the network being served. +# + +############################################ +# Global and network-specific parameters # +############################################ + +# +# Note: This section is matched by calling the dhcp_network instance of the +# files module. +# + + +# +# Default options that can be overridden by subsequent matches. +# +network + DHCP-Domain-Name-Server := 192.0.1.100, + DHCP-Domain-Name-Server += 192.0.1.101, + DHCP-Time-Server := 192.0.1.200, + DHCP-Domain-Name := "example.org", + DHCP-IP-Address-Lease-Time := 7200, + Fall-Through := yes + + +# +# The following examples set options specific to the Layer 2 network, matched +# on whether the internal attribute DHCP-Network-Subnet (that acts as a +# network identifier) is within the indicated range. This is equivalent to a +# "shared-network" or "multinet" configuration (i.e. one that is possibly +# composed of multiple subnets) as defined by some other DHCP servers. +# + +# +# Here is an example for a network containing a single IP subnet. We can set +# the network-specific options *and* we directly set the DHCP-Subnet-Mask, +# DHCP-Router-Address and DHCP-Broadcast-Address since it is a common reply +# parameter for all DHCP requests originating from this network. +# +# The use of the ^= "prepend" operator for setting DHCP-Domain-Name-Server +# results in this new value being inserted at the start of the list, meaning +# this will become the first DNS server presented in the reply. +# +# Note: If the architecture has only a single subnet for each Layer 2 network +# then by placing all subnet-related options here we can avoid calling the +# dhcp_subnet policy after IP allocation. +# +network DHCP-Network-Subnet < 10.20.0.0/16, Pool-Name := "smalldept" + DHCP-IP-Address-Lease-Time := 3600, + DHCP-Domain-Name := "smalldept.example.org", + DHCP-Subnet-Mask := 255.255.0.0, + DHCP-Router-Address := 10.20.0.1, + DHCP-Domain-Name-Server ^= 10.20.0.2, + DHCP-Broadcast-Address := 10.20.255.255 + +# +# Here is an example for a network that consists of multiple IP subnets, each +# of which is valid for a DHCP request originating from the network. We set +# the Pool-Name parameter to identify a single pool that contains the IP +# address within each subnet, any of which is suitable. +# +# We set the options that are common to the network but we defer the setting +# of DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address until an +# address has been allocated. Only then do we know which subnet parameters are +# required. See the next section. +# +network DHCP-Network-Subnet < 10.30.0.0/16, Pool-Name := "bigdept" + DHCP-Domain-Name := "bigdept.example.org" + + +# +# Here is an example for a network that has a dedicated pool for admin staff +# and a seperate pool for everything else. +# +network DHCP-Network-Subnet < 192.0.2.0/24, DHCP-Group-Name == "admin", Pool-Name := "admin-only" +network DHCP-Network-Subnet < 192.0.2.0/24, Pool-Name := "general" + + +################################ +# Subnet-specific parameters # +################################ + +# +# Note: This section is matched by calling the dhcp_subnet policy which sets +# DHCP-Network-Subnet to the allocated IP address of the device and then +# calls the dhcp_subnet instance of the files module. +# +# Layer 2 networks many contain multiple subnets, each with their own gateway. +# We call this section *after* the allocation of an IP address (e.g. from a +# single pool containing addresses within multiple equally-valid subnets for +# the network) so that we then know which subnet-specific parameters to +# return. +# + +# +# Subnet-specific options, matched on whether the allocated IP address is +# within the indicated range. +# +subnet DHCP-Network-Subnet < 10.30.10.0/24 + DHCP-Subnet-Mask := 255.255.255.0, + DHCP-Router-Address := 10.30.10.1, + DHCP-Broadcast-Address := 10.30.10.255 + +subnet DHCP-Network-Subnet < 10.30.20.0/24 + DHCP-Subnet-Mask := 255.255.255.0, + DHCP-Router-Address := 10.30.20.1, + DHCP-Broadcast-Address := 10.30.20.255 + + +############################### +# Group-specific parameters # +############################### + +# +# Note: This section is matched by calling the dhcp_group_options policy. +# +# It should be called *after* defining the device's group memberships in +# DHCP-Group-Name request attributes. In the default dhcp virtual server this +# is demonstrated with the help of the dhcp_group_membership instance of the +# passwd module. +# + +# +# Group-specific options, keyed by DHCP-Group-Name +# +group1 + DHCP-Server-Host-Name := "terminal-booter.example.org", + DHCP-Boot-Filename := "bootfile.pxe" + + +############################## +# Host-specific parameters # +############################## + +# +# Note: This section is matched by calling the dhcp_hosts instance of the +# files module. +# + +# +# Host-specific options, keyed by DHCP-Client-Hardware-Address +# +host-00:10:20:30:40:50 + DHCP-Boot-Filename := "customboot.pxe" + +host-10:90:80:70:aa:bb + DHCP-X-Window-Font-Server := 10.20.1.10, + DHCP-Impress-Server := 10.20.1.20 |