diff options
Diffstat (limited to 'tests/topotests/ospf6_topo1_vrf')
19 files changed, 906 insertions, 0 deletions
diff --git a/tests/topotests/ospf6_topo1_vrf/README.md b/tests/topotests/ospf6_topo1_vrf/README.md new file mode 100644 index 0000000..18bca5c --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/README.md @@ -0,0 +1,132 @@ +# OSPFv3 (IPv6) Topology Test + +## Topology + -----\ + SW1 - Stub Net 1 SW2 - Stub Net 2 \ + fc00:1:1:1::/64 fc00:2:2:2::/64 \ + \___________________/ \___________________/ | + | | | + | | | + | ::1 | ::2 | + +---------+---------+ +---------+---------+ | + | R1 | | R2 | | + | FRRouting | | FRRouting | | + | Rtr-ID: 10.0.0.1 | | Rtr-ID: 10.0.0.2 | | + +---------+---------+ +---------+---------+ | + | ::1 | ::2 \ + \______ ___________/ OSPFv3 + \ / Area 0.0.0.0 + \ / / + ~~~~~~~~~~~~~~~~~~ | + ~~ SW5 ~~ | + ~~ Switch ~~ | + ~~ fc00:A:A:A::/64 ~~ | + ~~~~~~~~~~~~~~~~~~ | + | /---- | + | ::3 | SW3 - Stub Net 3 | + +---------+---------+ /-+ fc00:3:3:3::/64 | + | R3 | / | / + | FRRouting +--/ \---- / + | Rtr-ID: 10.0.0.3 | ::3 ___________/ + +---------+---------+ \ + | ::3 \ + | \ + ~~~~~~~~~~~~~~~~~~ | + ~~ SW6 ~~ | + ~~ Switch ~~ | + ~~ fc00:B:B:B::/64 ~~ \ + ~~~~~~~~~~~~~~~~~~ OSPFv3 + | Area 0.0.0.1 + | ::4 / + +---------+---------+ /---- | + | R4 | | SW4 - Stub Net 4 | + | FRRouting +------+ fc00:4:4:4::/64 | + | Rtr-ID: 10.0.0.4 | ::4 | / + +-------------------+ \---- / + -----/ + +## FRR Configuration + +Full config as used is in r1 / r2 / r3 / r4 / r5 subdirectories + +Simplified `R1` config (R1 is similar) + + hostname r1 + ! + interface r1-stubnet vrf r1-cust1 + ipv6 ospf6 area 0.0.0.0 + ipv6 address fc00:1:1:1::1/64 + ipv6 ospf6 network broadcast + ! + interface r1-sw5 vrf r1-cust1 + ipv6 ospf6 area 0.0.0.0 + ipv6 address fc00:a:a:a::1/64 + ipv6 ospf6 network broadcast + ! + router ospf6 vrf r1-cust1 + router-id 10.0.0.1 + log-adjacency-changes detail + redistribute static + ! + ipv6 route fc00:1111:1111:1111::/64 fc00:1:1:1::1234 vrf r1-cust1 + +Simplified `R3` config + + hostname r3 + ! + interface r3-stubnet vrf r3-cust1 + ipv6 ospf6 area 0.0.0.0 + ipv6 address fc00:3:3:3::3/64 + ipv6 ospf6 network broadcast + ! + interface r3-sw5 vrf r3-cust1 + ipv6 ospf6 area 0.0.0.0 + ipv6 address fc00:a:a:a::3/64 + ipv6 ospf6 network broadcast + ! + interface r3-sw6 vrf r3-cust1 + ipv6 ospf6 area 0.0.0.1 + ipv6 address fc00:b:b:b::3/64 + ipv6 ospf6 network broadcast + ! + router ospf6 vrf r3-cust1 + router-id 10.0.0.3 + log-adjacency-changes detail + redistribute static + ! + ipv6 route fc00:3333:3333:3333::/64 fc00:3:3:3::1234 vrf r3-cust1 + +## Tests executed + +### Check if FRR is running + +Test is executed by running + + vtysh -c "show logging" | grep "Logging configuration for" + +on each FRR router. This should return the logging information for all daemons registered +to Zebra and the list of running daemons is compared to the daemons started for this test (`zebra` and `ospf6d`) + +### Verify for OSPFv3 to converge + +OSPFv3 is expected to converge on each view within 60s total time. Convergence is verified by executing (on each node) + + vtysh -c "show ipv6 ospf vrf r1-cust1 neigh" + +and checking for "Full" neighbor status in the output. An additional 15 seconds after the full converge is waited for routes to populate before the following routing table checks are executed + +### Verifying OSPFv3 Routing Tables + +Routing table is verified by running + + vtysh -c "show ipv6 route vrf r1-cust1" + +on each node and comparing the result to the stored example config (see `show_ipv6_route.ref` in r1 / r2 / r3 / r4 directories). Link-Local addresses are masked out before the compare. + +### Verifying Linux Kernel Routing Table + +Linux Kernel IPv6 Routing table is verified on each FRR node with + + ip -6 route vrf r1-cust1 + +Tables are compared with reference routing table (see `ip_6_address.ref` in r1 / r2 / r3 / r4 directories). Link-Local addresses are translated after getting collected on each node with interface name to make them consistent diff --git a/tests/topotests/ospf6_topo1_vrf/r1/ip_6_address.nhg.ref b/tests/topotests/ospf6_topo1_vrf/r1/ip_6_address.nhg.ref new file mode 100644 index 0000000..11fd9fe --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r1/ip_6_address.nhg.ref @@ -0,0 +1,10 @@ +fc00:1111:1111:1111::/64 nhid XXXX via fc00:1:1:1::1234 dev r1-stubnet proto XXXX metric 20 pref medium +fc00:1:1:1::/64 dev r1-stubnet proto XXXX metric 256 pref medium +fc00:2222:2222:2222::/64 nhid XXXX via fe80::__(r2-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium +fc00:2:2:2::/64 nhid XXXX via fe80::__(r2-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium +fc00:3333:3333:3333::/64 nhid XXXX via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium +fc00:3:3:3::/64 nhid XXXX via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium +fc00:4444:4444:4444::/64 nhid XXXX via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium +fc00:4:4:4::/64 nhid XXXX via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium +fc00:a:a:a::/64 dev r1-sw5 proto XXXX metric 256 pref medium +fc00:b:b:b::/64 nhid XXXX via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium diff --git a/tests/topotests/ospf6_topo1_vrf/r1/ip_6_address.ref b/tests/topotests/ospf6_topo1_vrf/r1/ip_6_address.ref new file mode 100644 index 0000000..f17e1fe --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r1/ip_6_address.ref @@ -0,0 +1,10 @@ +fc00:1111:1111:1111::/64 via fc00:1:1:1::1234 dev r1-stubnet proto XXXX metric 20 pref medium
+fc00:1:1:1::/64 dev r1-stubnet proto XXXX metric 256 pref medium
+fc00:2222:2222:2222::/64 via fe80::__(r2-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
+fc00:2:2:2::/64 via fe80::__(r2-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
+fc00:3333:3333:3333::/64 via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
+fc00:3:3:3::/64 via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
+fc00:4444:4444:4444::/64 via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
+fc00:4:4:4::/64 via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
+fc00:a:a:a::/64 dev r1-sw5 proto XXXX metric 256 pref medium
+fc00:b:b:b::/64 via fe80::__(r3-sw5)__ dev r1-sw5 proto XXXX metric 20 pref medium
diff --git a/tests/topotests/ospf6_topo1_vrf/r1/ospf6d.conf b/tests/topotests/ospf6_topo1_vrf/r1/ospf6d.conf new file mode 100644 index 0000000..e60c599 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r1/ospf6d.conf @@ -0,0 +1,31 @@ +hostname r1 +log file ospf6d.log +! +! debug ospf6 message all +! debug ospf6 lsa unknown +! debug ospf6 zebra +! debug ospf6 interface +! debug ospf6 neighbor +! debug ospf6 route table +! debug ospf6 flooding +! +interface r1-stubnet + ipv6 ospf6 area 0.0.0.0 + ipv6 ospf6 network broadcast + ipv6 ospf6 hello-interval 2 + ipv6 ospf6 dead-interval 10 +! +interface r1-sw5 + ipv6 ospf6 area 0.0.0.0 + ipv6 ospf6 network broadcast + ipv6 ospf6 hello-interval 2 + ipv6 ospf6 dead-interval 10 +! +router ospf6 vrf r1-cust1 + ospf6 router-id 10.0.0.1 + log-adjacency-changes detail + redistribute static +! +line vty + exec-timeout 0 0 +! diff --git a/tests/topotests/ospf6_topo1_vrf/r1/show_ipv6_vrf_route.ref b/tests/topotests/ospf6_topo1_vrf/r1/show_ipv6_vrf_route.ref new file mode 100644 index 0000000..96489b0 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r1/show_ipv6_vrf_route.ref @@ -0,0 +1,9 @@ +O fc00:1:1:1::/64 [110/10] is directly connected, r1-stubnet, weight 1, XX:XX:XX +O>* fc00:2:2:2::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX +O>* fc00:3:3:3::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX +O>* fc00:4:4:4::/64 [110/30] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX +O fc00:a:a:a::/64 [110/10] is directly connected, r1-sw5, weight 1, XX:XX:XX +O>* fc00:b:b:b::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX +O>* fc00:2222:2222:2222::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX +O>* fc00:3333:3333:3333::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX +O>* fc00:4444:4444:4444::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r1-sw5, weight 1, XX:XX:XX diff --git a/tests/topotests/ospf6_topo1_vrf/r1/zebra.conf b/tests/topotests/ospf6_topo1_vrf/r1/zebra.conf new file mode 100644 index 0000000..704912b --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r1/zebra.conf @@ -0,0 +1,20 @@ +! +hostname r1 +log file zebra.log +! +! debug zebra events +! debug zebra rib +! +interface r1-stubnet vrf r1-cust1 + ipv6 address fc00:1:1:1::1/64 +! +interface r1-sw5 vrf r1-cust1 + ipv6 address fc00:a:a:a::1/64 +! +interface lo +! +ipv6 route fc00:1111:1111:1111::/64 fc00:1:1:1::1234 vrf r1-cust1 +! +! +line vty +! diff --git a/tests/topotests/ospf6_topo1_vrf/r2/ip_6_address.ref b/tests/topotests/ospf6_topo1_vrf/r2/ip_6_address.ref new file mode 100644 index 0000000..1a3e67b --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r2/ip_6_address.ref @@ -0,0 +1,10 @@ +fc00:1111:1111:1111::/64 via fe80::__(r1-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
+fc00:1:1:1::/64 via fe80::__(r1-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
+fc00:2222:2222:2222::/64 via fc00:2:2:2::1234 dev r2-stubnet proto XXXX metric 20 pref medium
+fc00:2:2:2::/64 dev r2-stubnet proto XXXX metric 256 pref medium
+fc00:3333:3333:3333::/64 via fe80::__(r3-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
+fc00:3:3:3::/64 via fe80::__(r3-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
+fc00:4444:4444:4444::/64 via fe80::__(r3-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
+fc00:4:4:4::/64 via fe80::__(r3-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
+fc00:a:a:a::/64 dev r2-sw5 proto XXXX metric 256 pref medium
+fc00:b:b:b::/64 via fe80::__(r3-sw5)__ dev r2-sw5 proto XXXX metric 20 pref medium
diff --git a/tests/topotests/ospf6_topo1_vrf/r2/ospf6d.conf b/tests/topotests/ospf6_topo1_vrf/r2/ospf6d.conf new file mode 100644 index 0000000..778c778 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r2/ospf6d.conf @@ -0,0 +1,31 @@ +hostname r2 +log file ospf6d.log +! +! debug ospf6 message all +! debug ospf6 lsa unknown +! debug ospf6 zebra +! debug ospf6 interface +! debug ospf6 neighbor +! debug ospf6 route table +! debug ospf6 flooding +! +interface r2-stubnet + ipv6 ospf6 area 0.0.0.0 + ipv6 ospf6 network broadcast + ipv6 ospf6 dead-interval 10 + ipv6 ospf6 hello-interval 2 +! +interface r2-sw5 + ipv6 ospf6 area 0.0.0.0 + ipv6 ospf6 network broadcast + ipv6 ospf6 dead-interval 10 + ipv6 ospf6 hello-interval 2 +! +router ospf6 vrf r2-cust1 + ospf6 router-id 10.0.0.2 + log-adjacency-changes detail + redistribute static +! +line vty + exec-timeout 0 0 +! diff --git a/tests/topotests/ospf6_topo1_vrf/r2/show_ipv6_vrf_route.ref b/tests/topotests/ospf6_topo1_vrf/r2/show_ipv6_vrf_route.ref new file mode 100644 index 0000000..4c390f7 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r2/show_ipv6_vrf_route.ref @@ -0,0 +1,9 @@ +O>* fc00:1:1:1::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX +O fc00:2:2:2::/64 [110/10] is directly connected, r2-stubnet, weight 1, XX:XX:XX +O>* fc00:3:3:3::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX +O>* fc00:4:4:4::/64 [110/30] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX +O fc00:a:a:a::/64 [110/10] is directly connected, r2-sw5, weight 1, XX:XX:XX +O>* fc00:b:b:b::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX +O>* fc00:1111:1111:1111::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX +O>* fc00:3333:3333:3333::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX +O>* fc00:4444:4444:4444::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r2-sw5, weight 1, XX:XX:XX diff --git a/tests/topotests/ospf6_topo1_vrf/r2/zebra.conf b/tests/topotests/ospf6_topo1_vrf/r2/zebra.conf new file mode 100644 index 0000000..123d8c4 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r2/zebra.conf @@ -0,0 +1,20 @@ +! +hostname r2 +log file zebra.log +! +! debug zebra events +! debug zebra rib +! +interface r2-stubnet vrf r2-cust1 + ipv6 address fc00:2:2:2::2/64 +! +interface r2-sw5 vrf r2-cust1 + ipv6 address fc00:a:a:a::2/64 +! +interface lo +! +ipv6 route fc00:2222:2222:2222::/64 fc00:2:2:2::1234 vrf r2-cust1 +! +! +line vty +! diff --git a/tests/topotests/ospf6_topo1_vrf/r3/ip_6_address.ref b/tests/topotests/ospf6_topo1_vrf/r3/ip_6_address.ref new file mode 100644 index 0000000..d70027f --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r3/ip_6_address.ref @@ -0,0 +1,10 @@ +fc00:1111:1111:1111::/64 via fe80::__(r1-sw5)__ dev r3-sw5 proto XXXX metric 20 pref medium
+fc00:1:1:1::/64 via fe80::__(r1-sw5)__ dev r3-sw5 proto XXXX metric 20 pref medium
+fc00:2222:2222:2222::/64 via fe80::__(r2-sw5)__ dev r3-sw5 proto XXXX metric 20 pref medium
+fc00:2:2:2::/64 via fe80::__(r2-sw5)__ dev r3-sw5 proto XXXX metric 20 pref medium
+fc00:3333:3333:3333::/64 via fc00:3:3:3::1234 dev r3-stubnet proto XXXX metric 20 pref medium
+fc00:3:3:3::/64 dev r3-stubnet proto XXXX metric 256 pref medium
+fc00:4444:4444:4444::/64 via fe80::__(r4-sw6)__ dev r3-sw6 proto XXXX metric 20 pref medium
+fc00:4:4:4::/64 via fe80::__(r4-sw6)__ dev r3-sw6 proto XXXX metric 20 pref medium
+fc00:a:a:a::/64 dev r3-sw5 proto XXXX metric 256 pref medium
+fc00:b:b:b::/64 dev r3-sw6 proto XXXX metric 256 pref medium
diff --git a/tests/topotests/ospf6_topo1_vrf/r3/ospf6d.conf b/tests/topotests/ospf6_topo1_vrf/r3/ospf6d.conf new file mode 100644 index 0000000..61d183f --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r3/ospf6d.conf @@ -0,0 +1,37 @@ +hostname r3 +log file ospf6d.log +! +! debug ospf6 message all +! debug ospf6 lsa unknown +! debug ospf6 zebra +! debug ospf6 interface +! debug ospf6 neighbor +! debug ospf6 route table +! debug ospf6 flooding +! +interface r3-stubnet + ipv6 ospf6 area 0.0.0.0 + ipv6 ospf6 network broadcast + ipv6 ospf6 dead-interval 10 + ipv6 ospf6 hello-interval 2 +! +interface r3-sw5 + ipv6 ospf6 area 0.0.0.0 + ipv6 ospf6 network broadcast + ipv6 ospf6 dead-interval 10 + ipv6 ospf6 hello-interval 2 +! +interface r3-sw6 + ipv6 ospf6 area 0.0.0.1 + ipv6 ospf6 network broadcast + ipv6 ospf6 dead-interval 10 + ipv6 ospf6 hello-interval 2 +! +router ospf6 vrf r3-cust1 + ospf6 router-id 10.0.0.3 + log-adjacency-changes detail + redistribute static +! +line vty + exec-timeout 0 0 +! diff --git a/tests/topotests/ospf6_topo1_vrf/r3/show_ipv6_vrf_route.ref b/tests/topotests/ospf6_topo1_vrf/r3/show_ipv6_vrf_route.ref new file mode 100644 index 0000000..989213f --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r3/show_ipv6_vrf_route.ref @@ -0,0 +1,9 @@ +O>* fc00:1:1:1::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r3-sw5, weight 1, XX:XX:XX +O>* fc00:2:2:2::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r3-sw5, weight 1, XX:XX:XX +O fc00:3:3:3::/64 [110/10] is directly connected, r3-stubnet, weight 1, XX:XX:XX +O>* fc00:4:4:4::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r3-sw6, weight 1, XX:XX:XX +O fc00:a:a:a::/64 [110/10] is directly connected, r3-sw5, weight 1, XX:XX:XX +O fc00:b:b:b::/64 [110/10] is directly connected, r3-sw6, weight 1, XX:XX:XX +O>* fc00:1111:1111:1111::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r3-sw5, weight 1, XX:XX:XX +O>* fc00:2222:2222:2222::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r3-sw5, weight 1, XX:XX:XX +O>* fc00:4444:4444:4444::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r3-sw6, weight 1, XX:XX:XX diff --git a/tests/topotests/ospf6_topo1_vrf/r3/zebra.conf b/tests/topotests/ospf6_topo1_vrf/r3/zebra.conf new file mode 100644 index 0000000..bd6873d --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r3/zebra.conf @@ -0,0 +1,23 @@ +! +hostname r3 +log file zebra.log +! +! debug zebra events +! debug zebra rib +! +interface r3-stubnet vrf r3-cust1 + ipv6 address fc00:3:3:3::3/64 +! +interface r3-sw5 vrf r3-cust1 + ipv6 address fc00:a:a:a::3/64 +! +interface r3-sw6 vrf r3-cust1 + ipv6 address fc00:b:b:b::3/64 +! +interface lo +! +ipv6 route fc00:3333:3333:3333::/64 fc00:3:3:3::1234 vrf r3-cust1 +! +! +line vty +! diff --git a/tests/topotests/ospf6_topo1_vrf/r4/ip_6_address.ref b/tests/topotests/ospf6_topo1_vrf/r4/ip_6_address.ref new file mode 100644 index 0000000..0883f3c --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r4/ip_6_address.ref @@ -0,0 +1,10 @@ +fc00:1111:1111:1111::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:1:1:1::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:2222:2222:2222::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:2:2:2::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:3333:3333:3333::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:3:3:3::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:4444:4444:4444::/64 via fc00:4:4:4::1234 dev r4-stubnet proto XXXX metric 20 pref medium
+fc00:4:4:4::/64 dev r4-stubnet proto XXXX metric 256 pref medium
+fc00:a:a:a::/64 via fe80::__(r3-sw6)__ dev r4-sw6 proto XXXX metric 20 pref medium
+fc00:b:b:b::/64 dev r4-sw6 proto XXXX metric 256 pref medium
diff --git a/tests/topotests/ospf6_topo1_vrf/r4/ospf6d.conf b/tests/topotests/ospf6_topo1_vrf/r4/ospf6d.conf new file mode 100644 index 0000000..12f6f52 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r4/ospf6d.conf @@ -0,0 +1,31 @@ +hostname r4 +log file ospf6d.log +! +! debug ospf6 message all +! debug ospf6 lsa unknown +! debug ospf6 zebra +! debug ospf6 interface +! debug ospf6 neighbor +! debug ospf6 route table +! debug ospf6 flooding +! +interface r4-stubnet + ipv6 ospf6 area 0.0.0.1 + ipv6 ospf6 network broadcast + ipv6 ospf6 hello-interval 2 + ipv6 ospf6 dead-interval 10 +! +interface r4-sw6 + ipv6 ospf6 area 0.0.0.1 + ipv6 ospf6 network broadcast + ipv6 ospf6 hello-interval 2 + ipv6 ospf6 dead-interval 10 +! +router ospf6 vrf r4-cust1 + ospf6 router-id 10.0.0.4 + log-adjacency-changes detail + redistribute static +! +line vty + exec-timeout 0 0 +! diff --git a/tests/topotests/ospf6_topo1_vrf/r4/show_ipv6_vrf_route.ref b/tests/topotests/ospf6_topo1_vrf/r4/show_ipv6_vrf_route.ref new file mode 100644 index 0000000..730fd9f --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r4/show_ipv6_vrf_route.ref @@ -0,0 +1,9 @@ +O>* fc00:1:1:1::/64 [110/30] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX +O>* fc00:2:2:2::/64 [110/30] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX +O>* fc00:3:3:3::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX +O fc00:4:4:4::/64 [110/10] is directly connected, r4-stubnet, weight 1, XX:XX:XX +O>* fc00:a:a:a::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX +O fc00:b:b:b::/64 [110/10] is directly connected, r4-sw6, weight 1, XX:XX:XX +O>* fc00:1111:1111:1111::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX +O>* fc00:2222:2222:2222::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX +O>* fc00:3333:3333:3333::/64 [110/20] via fe80::XXXX:XXXX:XXXX:XXXX, r4-sw6, weight 1, XX:XX:XX diff --git a/tests/topotests/ospf6_topo1_vrf/r4/zebra.conf b/tests/topotests/ospf6_topo1_vrf/r4/zebra.conf new file mode 100644 index 0000000..0d9d011 --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/r4/zebra.conf @@ -0,0 +1,20 @@ +! +hostname r4 +log file zebra.log +! +! debug zebra events +! debug zebra rib +! +interface r4-stubnet vrf r4-cust1 + ipv6 address fc00:4:4:4::4/64 +! +interface r4-sw6 vrf r4-cust1 + ipv6 address fc00:b:b:b::4/64 +! +interface lo +! +ipv6 route fc00:4444:4444:4444::/64 fc00:4:4:4::1234 vrf r4-cust1 +! +! +line vty +! diff --git a/tests/topotests/ospf6_topo1_vrf/test_ospf6_topo1_vrf.py b/tests/topotests/ospf6_topo1_vrf/test_ospf6_topo1_vrf.py new file mode 100755 index 0000000..f823d5a --- /dev/null +++ b/tests/topotests/ospf6_topo1_vrf/test_ospf6_topo1_vrf.py @@ -0,0 +1,475 @@ +#!/usr/bin/env python + +# +# test_ospf6_topo1_vrf.py +# Part of NetDEF Topology Tests +# +# Copyright (c) 2021 by Niral Networks, Inc. ("Niral Networks") +# Used Copyright (c) 2016 by Network Device Education Foundation, +# Inc. ("NetDEF") in this file. +# +# Permission to use, copy, modify, and/or distribute this software +# for any purpose with or without fee is hereby granted, provided +# that the above copyright notice and this permission notice appear +# in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND NETDEF DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NETDEF BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY +# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS +# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +r""" +test_ospf6_topo1_vrf.py: + + -----\ + SW1 - Stub Net 1 SW2 - Stub Net 2 \ + fc00:1:1:1::/64 fc00:2:2:2::/64 \ +\___________________/ \___________________/ | + | | | + | | | + | ::1 | ::2 | ++---------+---------+ +---------+---------+ | +| R1 | | R2 | | +| FRRouting | | FRRouting | | +| Rtr-ID: 10.0.0.1 | | Rtr-ID: 10.0.0.2 | | ++---------+---------+ +---------+---------+ | + | ::1 | ::2 \ + \______ ___________/ OSPFv3 + \ / Area 0.0.0.0 + \ / / + ~~~~~~~~~~~~~~~~~~ | + ~~ SW5 ~~ | + ~~ Switch ~~ | + ~~ fc00:A:A:A::/64 ~~ | + ~~~~~~~~~~~~~~~~~~ | + | /---- | + | ::3 | SW3 - Stub Net 3 | + +---------+---------+ /-+ fc00:3:3:3::/64 | + | R3 | / | / + | FRRouting +--/ \---- / + | Rtr-ID: 10.0.0.3 | ::3 ___________/ + +---------+---------+ \ + | ::3 \ + | \ + ~~~~~~~~~~~~~~~~~~ | + ~~ SW6 ~~ | + ~~ Switch ~~ | + ~~ fc00:B:B:B::/64 ~~ \ + ~~~~~~~~~~~~~~~~~~ OSPFv3 + | Area 0.0.0.1 + | ::4 / + +---------+---------+ /---- | + | R4 | | SW4 - Stub Net 4 | + | FRRouting +------+ fc00:4:4:4::/64 | + | Rtr-ID: 10.0.0.4 | ::4 | / + +-------------------+ \---- / + -----/ +""" + +import os +import re +import sys +import pytest + +from functools import partial + + +# Save the Current Working Directory to find configuration files later. +CWD = os.path.dirname(os.path.realpath(__file__)) +sys.path.append(os.path.join(CWD, "../")) + +# pylint: disable=C0413 +# Import topogen and topotest helpers +from lib import topotest +from lib.topogen import Topogen, TopoRouter, get_topogen +from lib.topolog import logger +from lib.topotest import iproute2_is_vrf_capable +from lib.common_config import required_linux_kernel_version + + +pytestmark = [pytest.mark.ospfd] + + +def build_topo(tgen): + "Build function" + + # Create 4 routers + for routern in range(1, 5): + tgen.add_router("r{}".format(routern)) + + # + # Wire up the switches and routers + # Note that we specify the link names so we match the config files + # + + # Create a empty network for router 1 + switch = tgen.add_switch("s1") + switch.add_link(tgen.gears["r1"], nodeif="r1-stubnet") + + # Create a empty network for router 2 + switch = tgen.add_switch("s2") + switch.add_link(tgen.gears["r2"], nodeif="r2-stubnet") + + # Create a empty network for router 3 + switch = tgen.add_switch("s3") + switch.add_link(tgen.gears["r3"], nodeif="r3-stubnet") + + # Create a empty network for router 4 + switch = tgen.add_switch("s4") + switch.add_link(tgen.gears["r4"], nodeif="r4-stubnet") + + # Interconnect routers 1, 2, and 3 + switch = tgen.add_switch("s5") + switch.add_link(tgen.gears["r1"], nodeif="r1-sw5") + switch.add_link(tgen.gears["r2"], nodeif="r2-sw5") + switch.add_link(tgen.gears["r3"], nodeif="r3-sw5") + + # Interconnect routers 3 and 4 + switch = tgen.add_switch("s6") + switch.add_link(tgen.gears["r3"], nodeif="r3-sw6") + switch.add_link(tgen.gears["r4"], nodeif="r4-sw6") + + +##################################################### +## +## Tests starting +## +##################################################### + + +def setup_module(mod): + "Sets up the pytest environment" + + # Required linux kernel version for this suite to run. + result = required_linux_kernel_version("5.0") + if result is not True: + pytest.skip("Kernel requirements are not met") + + tgen = Topogen(build_topo, mod.__name__) + tgen.start_topology() + + logger.info("** %s: Setup Topology" % mod.__name__) + logger.info("******************************************") + + # For debugging after starting net, but before starting FRR, + # uncomment the next line + # tgen.mininet_cli() + + logger.info("Testing with VRF Lite support") + + cmds = [ + "ip link add {0}-cust1 type vrf table 1001", + "ip link add loop1 type dummy", + "ip link set {0}-stubnet master {0}-cust1", + ] + + cmds1 = ["ip link set {0}-sw5 master {0}-cust1"] + + cmds2 = ["ip link set {0}-sw6 master {0}-cust1"] + + # For all registered routers, load the zebra configuration file + for rname, router in tgen.routers().items(): + # create VRF rx-cust1 and link rx-eth0 to rx-cust1 + for cmd in cmds: + output = tgen.net[rname].cmd(cmd.format(rname)) + if rname == "r1" or rname == "r2" or rname == "r3": + for cmd in cmds1: + output = tgen.net[rname].cmd(cmd.format(rname)) + if rname == "r3" or rname == "r4": + for cmd in cmds2: + output = tgen.net[rname].cmd(cmd.format(rname)) + + for rname, router in tgen.routers().items(): + router.load_config( + TopoRouter.RD_ZEBRA, os.path.join(CWD, "{}/zebra.conf".format(rname)) + ) + router.load_config( + TopoRouter.RD_OSPF6, os.path.join(CWD, "{}/ospf6d.conf".format(rname)) + ) + + # Initialize all routers. + tgen.start_router() + + # For debugging after starting FRR daemons, uncomment the next line + # tgen.mininet_cli() + + +def teardown_module(mod): + "Teardown the pytest environment" + tgen = get_topogen() + tgen.stop_topology() + + +def test_wait_protocol_convergence(): + "Wait for OSPFv3 to converge" + tgen = get_topogen() + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + logger.info("waiting for protocols to converge") + + def expect_neighbor_full(router, neighbor): + "Wait until OSPFv3 convergence." + logger.info("waiting OSPFv3 router '{}'".format(router)) + test_func = partial( + topotest.router_json_cmp, + tgen.gears[router], + "show ipv6 ospf6 vrf {0}-cust1 neighbor json".format(router), + {"neighbors": [{"neighborId": neighbor, "state": "Full"}]}, + ) + _, result = topotest.run_and_expect(test_func, None, count=130, wait=1) + assertmsg = '"{}" convergence failure'.format(router) + assert result is None, assertmsg + + expect_neighbor_full("r1", "10.0.0.2") + expect_neighbor_full("r1", "10.0.0.3") + + expect_neighbor_full("r2", "10.0.0.1") + expect_neighbor_full("r2", "10.0.0.3") + + expect_neighbor_full("r3", "10.0.0.1") + expect_neighbor_full("r3", "10.0.0.2") + expect_neighbor_full("r3", "10.0.0.4") + + +def compare_show_ipv6_vrf(rname, expected): + """ + Calls 'show ipv6 route' for router `rname` and compare the obtained + result with the expected output. + """ + tgen = get_topogen() + + # Use the vtysh output, with some masking to make comparison easy + vrf_name = "{0}-cust1".format(rname) + current = topotest.ip6_route_zebra(tgen.gears[rname], vrf_name) + + # Use just the 'O'spf lines of the output + linearr = [] + for line in current.splitlines(): + if re.match("^O", line): + linearr.append(line) + + current = "\n".join(linearr) + + return topotest.difflines( + topotest.normalize_text(current), + topotest.normalize_text(expected), + title1="Current output", + title2="Expected output", + ) + + +def test_ospfv3_routingTable(): + + tgen = get_topogen() + if tgen.routers_have_failure(): + pytest.skip("skipped because of router(s) failure") + + # For debugging, uncomment the next line + # tgen.mininet_cli() + # Verify OSPFv3 Routing Table + for router, rnode in tgen.routers().items(): + logger.info('Waiting for router "%s" convergence', router) + + # Load expected results from the command + reffile = os.path.join(CWD, "{}/show_ipv6_vrf_route.ref".format(router)) + expected = open(reffile).read() + + # Run test function until we get an result. Wait at most 60 seconds. + test_func = partial(compare_show_ipv6_vrf, router, expected) + result, diff = topotest.run_and_expect(test_func, "", count=120, wait=0.5) + assert result, "OSPFv3 did not converge on {}:\n{}".format(router, diff) + + +def test_linux_ipv6_kernel_routingTable(): + + # Required linux kernel version for this suite to run. + result = required_linux_kernel_version("4.15") + if result is not True: + pytest.skip("Kernel requirements are not met") + + # iproute2 needs to support VRFs for this suite to run. + if not iproute2_is_vrf_capable(): + pytest.skip("Installed iproute2 version does not support VRFs") + + tgen = get_topogen() + + if tgen.routers_have_failure(): + pytest.skip("skipped because of router(s) failure") + + # Verify Linux Kernel Routing Table + logger.info("Verifying Linux IPv6 Kernel Routing Table") + + failures = 0 + + # Get a list of all current link-local addresses first as they change for + # each run and we need to translate them + linklocals = [] + for i in range(1, 5): + linklocals += tgen.net["r{}".format(i)].get_ipv6_linklocal() + + # Now compare the routing tables (after substituting link-local addresses) + + for i in range(1, 5): + # Actual output from router + actual = ( + tgen.gears["r{}".format(i)] + .run("ip -6 route show vrf r{}-cust1".format(i)) + .rstrip() + ) + if "nhid" in actual: + refTableFile = os.path.join(CWD, "r{}/ip_6_address.nhg.ref".format(i)) + else: + refTableFile = os.path.join(CWD, "r{}/ip_6_address.ref".format(i)) + + if os.path.isfile(refTableFile): + expected = open(refTableFile).read().rstrip() + # Fix newlines (make them all the same) + expected = ("\n".join(expected.splitlines())).splitlines(1) + + # Mask out Link-Local mac addresses + for ll in linklocals: + actual = actual.replace(ll[1], "fe80::__(%s)__" % ll[0]) + # Mask out protocol name or number + actual = re.sub(r"[ ]+proto [0-9a-z]+ +", " proto XXXX ", actual) + actual = re.sub(r"[ ]+nhid [0-9]+ +", " nhid XXXX ", actual) + # Remove ff00::/8 routes (seen on some kernels - not from FRR) + actual = re.sub(r"ff00::/8.*", "", actual) + + # Strip empty lines + actual = actual.lstrip() + actual = actual.rstrip() + actual = re.sub(r" +", " ", actual) + + filtered_lines = [] + for line in sorted(actual.splitlines()): + if line.startswith("fe80::/64 ") or line.startswith( + "unreachable fe80::/64 " + ): + continue + if "anycast" in line: + continue + if "multicast" in line: + continue + filtered_lines.append(line) + actual = "\n".join(filtered_lines).splitlines(1) + + # Print Actual table + # logger.info("Router r%s table" % i) + # for line in actual: + # logger.info(line.rstrip()) + + # Generate Diff + diff = topotest.get_textdiff( + actual, + expected, + title1="actual OSPFv3 IPv6 routing table", + title2="expected OSPFv3 IPv6 routing table", + ) + + # Empty string if it matches, otherwise diff contains unified diff + if diff: + sys.stderr.write( + "r%s failed Linux IPv6 Kernel Routing Table Check:\n%s\n" + % (i, diff) + ) + failures += 1 + else: + logger.info("r%s ok" % i) + + assert failures == 0, ( + "Linux Kernel IPv6 Routing Table verification failed for router r%s:\n%s" + % (i, diff) + ) + + +def test_ospfv3_routingTable_write_multiplier(): + + tgen = get_topogen() + if tgen.routers_have_failure(): + pytest.skip("skipped because of router(s) failure") + + # For debugging, uncomment the next line + # tgen.mininet_cli() + # Modify R1 write muliplier and reset the interfaces + r1 = tgen.gears["r1"] + + r1.vtysh_cmd("conf t\nrouter ospf6 vrf r1-cust1 \n write-multiplier 100") + r1.vtysh_cmd("clear ipv6 ospf interface r1-stubnet") + r1.vtysh_cmd("clear ipv6 ospf interface r1-sw5") + + # Verify OSPFv3 Routing Table + for router, rnode in tgen.routers().items(): + logger.info('Waiting for router "%s" convergence', router) + + # Load expected results from the command + reffile = os.path.join(CWD, "{}/show_ipv6_vrf_route.ref".format(router)) + expected = open(reffile).read() + + # Run test function until we get an result. Wait at most 60 seconds. + test_func = partial(compare_show_ipv6_vrf, router, expected) + result, diff = topotest.run_and_expect(test_func, "", count=120, wait=0.5) + assert result, "OSPFv3 did not converge on {}:\n{}".format(router, diff) + + +def test_shutdown_check_stderr(): + + tgen = get_topogen() + + if tgen.routers_have_failure(): + pytest.skip("skipped because of router(s) failure") + + if os.environ.get("TOPOTESTS_CHECK_STDERR") is None: + logger.info( + "SKIPPED final check on StdErr output: Disabled (TOPOTESTS_CHECK_STDERR undefined)\n" + ) + pytest.skip("Skipping test for Stderr output") + + net = tgen.net + + logger.info("\n\n** Verifying unexpected STDERR output from daemons") + logger.info("******************************************") + + for i in range(1, 5): + net["r%s" % i].stopRouter() + log = net["r%s" % i].getStdErr("ospf6d") + if log: + logger.info("\nRouter r%s OSPF6d StdErr Log:\n%s" % (i, log)) + log = net["r%s" % i].getStdErr("zebra") + if log: + logger.info("\nRouter r%s Zebra StdErr Log:\n%s" % (i, log)) + + +def test_shutdown_check_memleak(): + "Run the memory leak test and report results." + + if os.environ.get("TOPOTESTS_CHECK_MEMLEAK") is None: + logger.info( + "SKIPPED final check on Memory leaks: Disabled (TOPOTESTS_CHECK_MEMLEAK undefined)" + ) + pytest.skip("Skipping test for memory leaks") + + tgen = get_topogen() + + net = tgen.net + + for i in range(1, 5): + net["r%s" % i].stopRouter() + net["r%s" % i].report_memory_leaks( + os.environ.get("TOPOTESTS_CHECK_MEMLEAK"), os.path.basename(__file__) + ) + + +if __name__ == "__main__": + + # To suppress tracebacks, either use the following pytest call or + # add "--tb=no" to cli + # retval = pytest.main(["-s", "--tb=no"]) + + retval = pytest.main(["-s"]) + sys.exit(retval) |