Adding upstream version 1.16.10.upstream/1.16.10upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 2304 insertions, 0 deletions

diff --git a/src/os/signal/doc.go b/src/os/signal/doc.go
new file mode 100644
index 0000000..2229d36
--- /dev/null
+++ b/src/os/signal/doc.go
@@ -0,0 +1,229 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package signal implements access to incoming signals.
+
+Signals are primarily used on Unix-like systems. For the use of this
+package on Windows and Plan 9, see below.
+
+Types of signals
+
+The signals SIGKILL and SIGSTOP may not be caught by a program, and
+therefore cannot be affected by this package.
+
+Synchronous signals are signals triggered by errors in program
+execution: SIGBUS, SIGFPE, and SIGSEGV. These are only considered
+synchronous when caused by program execution, not when sent using
+os.Process.Kill or the kill program or some similar mechanism. In
+general, except as discussed below, Go programs will convert a
+synchronous signal into a run-time panic.
+
+The remaining signals are asynchronous signals. They are not
+triggered by program errors, but are instead sent from the kernel or
+from some other program.
+
+Of the asynchronous signals, the SIGHUP signal is sent when a program
+loses its controlling terminal. The SIGINT signal is sent when the
+user at the controlling terminal presses the interrupt character,
+which by default is ^C (Control-C). The SIGQUIT signal is sent when
+the user at the controlling terminal presses the quit character, which
+by default is ^\ (Control-Backslash). In general you can cause a
+program to simply exit by pressing ^C, and you can cause it to exit
+with a stack dump by pressing ^\.
+
+Default behavior of signals in Go programs
+
+By default, a synchronous signal is converted into a run-time panic. A
+SIGHUP, SIGINT, or SIGTERM signal causes the program to exit. A
+SIGQUIT, SIGILL, SIGTRAP, SIGABRT, SIGSTKFLT, SIGEMT, or SIGSYS signal
+causes the program to exit with a stack dump. A SIGTSTP, SIGTTIN, or
+SIGTTOU signal gets the system default behavior (these signals are
+used by the shell for job control). The SIGPROF signal is handled
+directly by the Go runtime to implement runtime.CPUProfile. Other
+signals will be caught but no action will be taken.
+
+If the Go program is started with either SIGHUP or SIGINT ignored
+(signal handler set to SIG_IGN), they will remain ignored.
+
+If the Go program is started with a non-empty signal mask, that will
+generally be honored. However, some signals are explicitly unblocked:
+the synchronous signals, SIGILL, SIGTRAP, SIGSTKFLT, SIGCHLD, SIGPROF,
+and, on GNU/Linux, signals 32 (SIGCANCEL) and 33 (SIGSETXID)
+(SIGCANCEL and SIGSETXID are used internally by glibc). Subprocesses
+started by os.Exec, or by the os/exec package, will inherit the
+modified signal mask.
+
+Changing the behavior of signals in Go programs
+
+The functions in this package allow a program to change the way Go
+programs handle signals.
+
+Notify disables the default behavior for a given set of asynchronous
+signals and instead delivers them over one or more registered
+channels. Specifically, it applies to the signals SIGHUP, SIGINT,
+SIGQUIT, SIGABRT, and SIGTERM. It also applies to the job control
+signals SIGTSTP, SIGTTIN, and SIGTTOU, in which case the system
+default behavior does not occur. It also applies to some signals that
+otherwise cause no action: SIGUSR1, SIGUSR2, SIGPIPE, SIGALRM,
+SIGCHLD, SIGCONT, SIGURG, SIGXCPU, SIGXFSZ, SIGVTALRM, SIGWINCH,
+SIGIO, SIGPWR, SIGSYS, SIGINFO, SIGTHR, SIGWAITING, SIGLWP, SIGFREEZE,
+SIGTHAW, SIGLOST, SIGXRES, SIGJVM1, SIGJVM2, and any real time signals
+used on the system. Note that not all of these signals are available
+on all systems.
+
+If the program was started with SIGHUP or SIGINT ignored, and Notify
+is called for either signal, a signal handler will be installed for
+that signal and it will no longer be ignored. If, later, Reset or
+Ignore is called for that signal, or Stop is called on all channels
+passed to Notify for that signal, the signal will once again be
+ignored. Reset will restore the system default behavior for the
+signal, while Ignore will cause the system to ignore the signal
+entirely.
+
+If the program is started with a non-empty signal mask, some signals
+will be explicitly unblocked as described above. If Notify is called
+for a blocked signal, it will be unblocked. If, later, Reset is
+called for that signal, or Stop is called on all channels passed to
+Notify for that signal, the signal will once again be blocked.
+
+SIGPIPE
+
+When a Go program writes to a broken pipe, the kernel will raise a
+SIGPIPE signal.
+
+If the program has not called Notify to receive SIGPIPE signals, then
+the behavior depends on the file descriptor number. A write to a
+broken pipe on file descriptors 1 or 2 (standard output or standard
+error) will cause the program to exit with a SIGPIPE signal. A write
+to a broken pipe on some other file descriptor will take no action on
+the SIGPIPE signal, and the write will fail with an EPIPE error.
+
+If the program has called Notify to receive SIGPIPE signals, the file
+descriptor number does not matter. The SIGPIPE signal will be
+delivered to the Notify channel, and the write will fail with an EPIPE
+error.
+
+This means that, by default, command line programs will behave like
+typical Unix command line programs, while other programs will not
+crash with SIGPIPE when writing to a closed network connection.
+
+Go programs that use cgo or SWIG
+
+In a Go program that includes non-Go code, typically C/C++ code
+accessed using cgo or SWIG, Go's startup code normally runs first. It
+configures the signal handlers as expected by the Go runtime, before
+the non-Go startup code runs. If the non-Go startup code wishes to
+install its own signal handlers, it must take certain steps to keep Go
+working well. This section documents those steps and the overall
+effect changes to signal handler settings by the non-Go code can have
+on Go programs. In rare cases, the non-Go code may run before the Go
+code, in which case the next section also applies.
+
+If the non-Go code called by the Go program does not change any signal
+handlers or masks, then the behavior is the same as for a pure Go
+program.
+
+If the non-Go code installs any signal handlers, it must use the
+SA_ONSTACK flag with sigaction. Failing to do so is likely to cause
+the program to crash if the signal is received. Go programs routinely
+run with a limited stack, and therefore set up an alternate signal
+stack. Also, the Go standard library expects that any signal handlers
+will use the SA_RESTART flag. Failing to do so may cause some library
+calls to return "interrupted system call" errors.
+
+If the non-Go code installs a signal handler for any of the
+synchronous signals (SIGBUS, SIGFPE, SIGSEGV), then it should record
+the existing Go signal handler. If those signals occur while
+executing Go code, it should invoke the Go signal handler (whether the
+signal occurs while executing Go code can be determined by looking at
+the PC passed to the signal handler). Otherwise some Go run-time
+panics will not occur as expected.
+
+If the non-Go code installs a signal handler for any of the
+asynchronous signals, it may invoke the Go signal handler or not as it
+chooses. Naturally, if it does not invoke the Go signal handler, the
+Go behavior described above will not occur. This can be an issue with
+the SIGPROF signal in particular.
+
+The non-Go code should not change the signal mask on any threads
+created by the Go runtime. If the non-Go code starts new threads of
+its own, it may set the signal mask as it pleases.
+
+If the non-Go code starts a new thread, changes the signal mask, and
+then invokes a Go function in that thread, the Go runtime will
+automatically unblock certain signals: the synchronous signals,
+SIGILL, SIGTRAP, SIGSTKFLT, SIGCHLD, SIGPROF, SIGCANCEL, and
+SIGSETXID. When the Go function returns, the non-Go signal mask will
+be restored.
+
+If the Go signal handler is invoked on a non-Go thread not running Go
+code, the handler generally forwards the signal to the non-Go code, as
+follows. If the signal is SIGPROF, the Go handler does
+nothing. Otherwise, the Go handler removes itself, unblocks the
+signal, and raises it again, to invoke any non-Go handler or default
+system handler. If the program does not exit, the Go handler then
+reinstalls itself and continues execution of the program.
+
+Non-Go programs that call Go code
+
+When Go code is built with options like -buildmode=c-shared, it will
+be run as part of an existing non-Go program. The non-Go code may
+have already installed signal handlers when the Go code starts (that
+may also happen in unusual cases when using cgo or SWIG; in that case,
+the discussion here applies).  For -buildmode=c-archive the Go runtime
+will initialize signals at global constructor time.  For
+-buildmode=c-shared the Go runtime will initialize signals when the
+shared library is loaded.
+
+If the Go runtime sees an existing signal handler for the SIGCANCEL or
+SIGSETXID signals (which are used only on GNU/Linux), it will turn on
+the SA_ONSTACK flag and otherwise keep the signal handler.
+
+For the synchronous signals and SIGPIPE, the Go runtime will install a
+signal handler. It will save any existing signal handler. If a
+synchronous signal arrives while executing non-Go code, the Go runtime
+will invoke the existing signal handler instead of the Go signal
+handler.
+
+Go code built with -buildmode=c-archive or -buildmode=c-shared will
+not install any other signal handlers by default. If there is an
+existing signal handler, the Go runtime will turn on the SA_ONSTACK
+flag and otherwise keep the signal handler. If Notify is called for an
+asynchronous signal, a Go signal handler will be installed for that
+signal. If, later, Reset is called for that signal, the original
+handling for that signal will be reinstalled, restoring the non-Go
+signal handler if any.
+
+Go code built without -buildmode=c-archive or -buildmode=c-shared will
+install a signal handler for the asynchronous signals listed above,
+and save any existing signal handler. If a signal is delivered to a
+non-Go thread, it will act as described above, except that if there is
+an existing non-Go signal handler, that handler will be installed
+before raising the signal.
+
+Windows
+
+On Windows a ^C (Control-C) or ^BREAK (Control-Break) normally cause
+the program to exit. If Notify is called for os.Interrupt, ^C or ^BREAK
+will cause os.Interrupt to be sent on the channel, and the program will
+not exit. If Reset is called, or Stop is called on all channels passed
+to Notify, then the default behavior will be restored.
+
+Additionally, if Notify is called, and Windows sends CTRL_CLOSE_EVENT,
+CTRL_LOGOFF_EVENT or CTRL_SHUTDOWN_EVENT to the process, Notify will
+return syscall.SIGTERM. Unlike Control-C and Control-Break, Notify does
+not change process behavior when either CTRL_CLOSE_EVENT,
+CTRL_LOGOFF_EVENT or CTRL_SHUTDOWN_EVENT is received - the process will
+still get terminated unless it exits. But receiving syscall.SIGTERM will
+give the process an opportunity to clean up before termination.
+
+Plan 9
+
+On Plan 9, signals have type syscall.Note, which is a string. Calling
+Notify with a syscall.Note will cause that value to be sent on the
+channel when that string is posted as a note.
+
+*/
+package signal
diff --git a/src/os/signal/example_test.go b/src/os/signal/example_test.go
new file mode 100644
index 0000000..ecefc75
--- /dev/null
+++ b/src/os/signal/example_test.go
@@ -0,0 +1,38 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package signal_test
+
+import (
+	"fmt"
+	"os"
+	"os/signal"
+)
+
+func ExampleNotify() {
+	// Set up channel on which to send signal notifications.
+	// We must use a buffered channel or risk missing the signal
+	// if we're not ready to receive when the signal is sent.
+	c := make(chan os.Signal, 1)
+	signal.Notify(c, os.Interrupt)
+
+	// Block until a signal is received.
+	s := <-c
+	fmt.Println("Got signal:", s)
+}
+
+func ExampleNotify_allSignals() {
+	// Set up channel on which to send signal notifications.
+	// We must use a buffered channel or risk missing the signal
+	// if we're not ready to receive when the signal is sent.
+	c := make(chan os.Signal, 1)
+
+	// Passing no signals to Notify means that
+	// all signals will be sent to the channel.
+	signal.Notify(c)
+
+	// Block until any signal is received.
+	s := <-c
+	fmt.Println("Got signal:", s)
+}
diff --git a/src/os/signal/example_unix_test.go b/src/os/signal/example_unix_test.go
new file mode 100644
index 0000000..a0af37a
--- /dev/null
+++ b/src/os/signal/example_unix_test.go
@@ -0,0 +1,47 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris
+
+package signal_test
+
+import (
+	"context"
+	"fmt"
+	"log"
+	"os"
+	"os/signal"
+	"time"
+)
+
+// This example passes a context with a signal to tell a blocking function that
+// it should abandon its work after a signal is received.
+func ExampleNotifyContext() {
+	ctx, stop := signal.NotifyContext(context.Background(), os.Interrupt)
+	defer stop()
+
+	p, err := os.FindProcess(os.Getpid())
+	if err != nil {
+		log.Fatal(err)
+	}
+
+	// On a Unix-like system, pressing Ctrl+C on a keyboard sends a
+	// SIGINT signal to the process of the program in execution.
+	//
+	// This example simulates that by sending a SIGINT signal to itself.
+	if err := p.Signal(os.Interrupt); err != nil {
+		log.Fatal(err)
+	}
+
+	select {
+	case <-time.After(time.Second):
+		fmt.Println("missed signal")
+	case <-ctx.Done():
+		fmt.Println(ctx.Err()) // prints "context canceled"
+		stop()                 // stop receiving signal notifications as soon as possible.
+	}
+
+	// Output:
+	// context canceled
+}
diff --git a/src/os/signal/internal/pty/pty.go b/src/os/signal/internal/pty/pty.go
new file mode 100644
index 0000000..f8813ce
--- /dev/null
+++ b/src/os/signal/internal/pty/pty.go
@@ -0,0 +1,59 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix darwin dragonfly freebsd linux,!android netbsd openbsd
+// +build cgo
+
+// Package pty is a simple pseudo-terminal package for Unix systems,
+// implemented by calling C functions via cgo.
+// This is only used for testing the os/signal package.
+package pty
+
+/*
+#define _XOPEN_SOURCE 600
+#include <fcntl.h>
+#include <stdlib.h>
+#include <unistd.h>
+*/
+import "C"
+
+import (
+	"fmt"
+	"os"
+	"syscall"
+)
+
+type PtyError struct {
+	FuncName    string
+	ErrorString string
+	Errno       syscall.Errno
+}
+
+func ptyError(name string, err error) *PtyError {
+	return &PtyError{name, err.Error(), err.(syscall.Errno)}
+}
+
+func (e *PtyError) Error() string {
+	return fmt.Sprintf("%s: %s", e.FuncName, e.ErrorString)
+}
+
+func (e *PtyError) Unwrap() error { return e.Errno }
+
+// Open returns a control pty and the name of the linked process tty.
+func Open() (pty *os.File, processTTY string, err error) {
+	m, err := C.posix_openpt(C.O_RDWR)
+	if err != nil {
+		return nil, "", ptyError("posix_openpt", err)
+	}
+	if _, err := C.grantpt(m); err != nil {
+		C.close(m)
+		return nil, "", ptyError("grantpt", err)
+	}
+	if _, err := C.unlockpt(m); err != nil {
+		C.close(m)
+		return nil, "", ptyError("unlockpt", err)
+	}
+	processTTY = C.GoString(C.ptsname(m))
+	return os.NewFile(uintptr(m), "pty"), processTTY, nil
+}
diff --git a/src/os/signal/sig.s b/src/os/signal/sig.s
new file mode 100644
index 0000000..12833a8
--- /dev/null
+++ b/src/os/signal/sig.s
@@ -0,0 +1,8 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// The runtime package uses //go:linkname to push a few functions into this
+// package but we still need a .s file so the Go tool does not pass -complete
+// to the go tool compile so the latter does not complain about Go functions
+// with no bodies.
diff --git a/src/os/signal/signal.go b/src/os/signal/signal.go
new file mode 100644
index 0000000..4250a7e
--- /dev/null
+++ b/src/os/signal/signal.go
@@ -0,0 +1,334 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package signal
+
+import (
+	"context"
+	"os"
+	"sync"
+)
+
+var handlers struct {
+	sync.Mutex
+	// Map a channel to the signals that should be sent to it.
+	m map[chan<- os.Signal]*handler
+	// Map a signal to the number of channels receiving it.
+	ref [numSig]int64
+	// Map channels to signals while the channel is being stopped.
+	// Not a map because entries live here only very briefly.
+	// We need a separate container because we need m to correspond to ref
+	// at all times, and we also need to keep track of the *handler
+	// value for a channel being stopped. See the Stop function.
+	stopping []stopping
+}
+
+type stopping struct {
+	c chan<- os.Signal
+	h *handler
+}
+
+type handler struct {
+	mask [(numSig + 31) / 32]uint32
+}
+
+func (h *handler) want(sig int) bool {
+	return (h.mask[sig/32]>>uint(sig&31))&1 != 0
+}
+
+func (h *handler) set(sig int) {
+	h.mask[sig/32] |= 1 << uint(sig&31)
+}
+
+func (h *handler) clear(sig int) {
+	h.mask[sig/32] &^= 1 << uint(sig&31)
+}
+
+// Stop relaying the signals, sigs, to any channels previously registered to
+// receive them and either reset the signal handlers to their original values
+// (action=disableSignal) or ignore the signals (action=ignoreSignal).
+func cancel(sigs []os.Signal, action func(int)) {
+	handlers.Lock()
+	defer handlers.Unlock()
+
+	remove := func(n int) {
+		var zerohandler handler
+
+		for c, h := range handlers.m {
+			if h.want(n) {
+				handlers.ref[n]--
+				h.clear(n)
+				if h.mask == zerohandler.mask {
+					delete(handlers.m, c)
+				}
+			}
+		}
+
+		action(n)
+	}
+
+	if len(sigs) == 0 {
+		for n := 0; n < numSig; n++ {
+			remove(n)
+		}
+	} else {
+		for _, s := range sigs {
+			remove(signum(s))
+		}
+	}
+}
+
+// Ignore causes the provided signals to be ignored. If they are received by
+// the program, nothing will happen. Ignore undoes the effect of any prior
+// calls to Notify for the provided signals.
+// If no signals are provided, all incoming signals will be ignored.
+func Ignore(sig ...os.Signal) {
+	cancel(sig, ignoreSignal)
+}
+
+// Ignored reports whether sig is currently ignored.
+func Ignored(sig os.Signal) bool {
+	sn := signum(sig)
+	return sn >= 0 && signalIgnored(sn)
+}
+
+var (
+	// watchSignalLoopOnce guards calling the conditionally
+	// initialized watchSignalLoop. If watchSignalLoop is non-nil,
+	// it will be run in a goroutine lazily once Notify is invoked.
+	// See Issue 21576.
+	watchSignalLoopOnce sync.Once
+	watchSignalLoop     func()
+)
+
+// Notify causes package signal to relay incoming signals to c.
+// If no signals are provided, all incoming signals will be relayed to c.
+// Otherwise, just the provided signals will.
+//
+// Package signal will not block sending to c: the caller must ensure
+// that c has sufficient buffer space to keep up with the expected
+// signal rate. For a channel used for notification of just one signal value,
+// a buffer of size 1 is sufficient.
+//
+// It is allowed to call Notify multiple times with the same channel:
+// each call expands the set of signals sent to that channel.
+// The only way to remove signals from the set is to call Stop.
+//
+// It is allowed to call Notify multiple times with different channels
+// and the same signals: each channel receives copies of incoming
+// signals independently.
+func Notify(c chan<- os.Signal, sig ...os.Signal) {
+	if c == nil {
+		panic("os/signal: Notify using nil channel")
+	}
+
+	handlers.Lock()
+	defer handlers.Unlock()
+
+	h := handlers.m[c]
+	if h == nil {
+		if handlers.m == nil {
+			handlers.m = make(map[chan<- os.Signal]*handler)
+		}
+		h = new(handler)
+		handlers.m[c] = h
+	}
+
+	add := func(n int) {
+		if n < 0 {
+			return
+		}
+		if !h.want(n) {
+			h.set(n)
+			if handlers.ref[n] == 0 {
+				enableSignal(n)
+
+				// The runtime requires that we enable a
+				// signal before starting the watcher.
+				watchSignalLoopOnce.Do(func() {
+					if watchSignalLoop != nil {
+						go watchSignalLoop()
+					}
+				})
+			}
+			handlers.ref[n]++
+		}
+	}
+
+	if len(sig) == 0 {
+		for n := 0; n < numSig; n++ {
+			add(n)
+		}
+	} else {
+		for _, s := range sig {
+			add(signum(s))
+		}
+	}
+}
+
+// Reset undoes the effect of any prior calls to Notify for the provided
+// signals.
+// If no signals are provided, all signal handlers will be reset.
+func Reset(sig ...os.Signal) {
+	cancel(sig, disableSignal)
+}
+
+// Stop causes package signal to stop relaying incoming signals to c.
+// It undoes the effect of all prior calls to Notify using c.
+// When Stop returns, it is guaranteed that c will receive no more signals.
+func Stop(c chan<- os.Signal) {
+	handlers.Lock()
+
+	h := handlers.m[c]
+	if h == nil {
+		handlers.Unlock()
+		return
+	}
+	delete(handlers.m, c)
+
+	for n := 0; n < numSig; n++ {
+		if h.want(n) {
+			handlers.ref[n]--
+			if handlers.ref[n] == 0 {
+				disableSignal(n)
+			}
+		}
+	}
+
+	// Signals will no longer be delivered to the channel.
+	// We want to avoid a race for a signal such as SIGINT:
+	// it should be either delivered to the channel,
+	// or the program should take the default action (that is, exit).
+	// To avoid the possibility that the signal is delivered,
+	// and the signal handler invoked, and then Stop deregisters
+	// the channel before the process function below has a chance
+	// to send it on the channel, put the channel on a list of
+	// channels being stopped and wait for signal delivery to
+	// quiesce before fully removing it.
+
+	handlers.stopping = append(handlers.stopping, stopping{c, h})
+
+	handlers.Unlock()
+
+	signalWaitUntilIdle()
+
+	handlers.Lock()
+
+	for i, s := range handlers.stopping {
+		if s.c == c {
+			handlers.stopping = append(handlers.stopping[:i], handlers.stopping[i+1:]...)
+			break
+		}
+	}
+
+	handlers.Unlock()
+}
+
+// Wait until there are no more signals waiting to be delivered.
+// Defined by the runtime package.
+func signalWaitUntilIdle()
+
+func process(sig os.Signal) {
+	n := signum(sig)
+	if n < 0 {
+		return
+	}
+
+	handlers.Lock()
+	defer handlers.Unlock()
+
+	for c, h := range handlers.m {
+		if h.want(n) {
+			// send but do not block for it
+			select {
+			case c <- sig:
+			default:
+			}
+		}
+	}
+
+	// Avoid the race mentioned in Stop.
+	for _, d := range handlers.stopping {
+		if d.h.want(n) {
+			select {
+			case d.c <- sig:
+			default:
+			}
+		}
+	}
+}
+
+// NotifyContext returns a copy of the parent context that is marked done
+// (its Done channel is closed) when one of the listed signals arrives,
+// when the returned stop function is called, or when the parent context's
+// Done channel is closed, whichever happens first.
+//
+// The stop function unregisters the signal behavior, which, like signal.Reset,
+// may restore the default behavior for a given signal. For example, the default
+// behavior of a Go program receiving os.Interrupt is to exit. Calling
+// NotifyContext(parent, os.Interrupt) will change the behavior to cancel
+// the returned context. Future interrupts received will not trigger the default
+// (exit) behavior until the returned stop function is called.
+//
+// The stop function releases resources associated with it, so code should
+// call stop as soon as the operations running in this Context complete and
+// signals no longer need to be diverted to the context.
+func NotifyContext(parent context.Context, signals ...os.Signal) (ctx context.Context, stop context.CancelFunc) {
+	ctx, cancel := context.WithCancel(parent)
+	c := &signalCtx{
+		Context: ctx,
+		cancel:  cancel,
+		signals: signals,
+	}
+	c.ch = make(chan os.Signal, 1)
+	Notify(c.ch, c.signals...)
+	if ctx.Err() == nil {
+		go func() {
+			select {
+			case <-c.ch:
+				c.cancel()
+			case <-c.Done():
+			}
+		}()
+	}
+	return c, c.stop
+}
+
+type signalCtx struct {
+	context.Context
+
+	cancel  context.CancelFunc
+	signals []os.Signal
+	ch      chan os.Signal
+}
+
+func (c *signalCtx) stop() {
+	c.cancel()
+	Stop(c.ch)
+}
+
+type stringer interface {
+	String() string
+}
+
+func (c *signalCtx) String() string {
+	var buf []byte
+	// We know that the type of c.Context is context.cancelCtx, and we know that the
+	// String method of cancelCtx returns a string that ends with ".WithCancel".
+	name := c.Context.(stringer).String()
+	name = name[:len(name)-len(".WithCancel")]
+	buf = append(buf, "signal.NotifyContext("+name...)
+	if len(c.signals) != 0 {
+		buf = append(buf, ", ["...)
+		for i, s := range c.signals {
+			buf = append(buf, s.String()...)
+			if i != len(c.signals)-1 {
+				buf = append(buf, ' ')
+			}
+		}
+		buf = append(buf, ']')
+	}
+	buf = append(buf, ')')
+	return string(buf)
+}
diff --git a/src/os/signal/signal_cgo_test.go b/src/os/signal/signal_cgo_test.go
new file mode 100644
index 0000000..a8a4856
--- /dev/null
+++ b/src/os/signal/signal_cgo_test.go
@@ -0,0 +1,240 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build darwin dragonfly freebsd linux,!android netbsd openbsd
+// +build cgo
+
+// Note that this test does not work on Solaris: issue #22849.
+// Don't run the test on Android because at least some versions of the
+// C library do not define the posix_openpt function.
+
+package signal_test
+
+import (
+	"bufio"
+	"bytes"
+	"context"
+	"fmt"
+	"io"
+	"io/fs"
+	"os"
+	"os/exec"
+	ptypkg "os/signal/internal/pty"
+	"strconv"
+	"strings"
+	"sync"
+	"syscall"
+	"testing"
+	"time"
+)
+
+func TestTerminalSignal(t *testing.T) {
+	const enteringRead = "test program entering read"
+	if os.Getenv("GO_TEST_TERMINAL_SIGNALS") != "" {
+		var b [1]byte
+		fmt.Println(enteringRead)
+		n, err := os.Stdin.Read(b[:])
+		if n == 1 {
+			if b[0] == '\n' {
+				// This is what we expect
+				fmt.Println("read newline")
+			} else {
+				fmt.Printf("read 1 byte: %q\n", b)
+			}
+		} else {
+			fmt.Printf("read %d bytes\n", n)
+		}
+		if err != nil {
+			fmt.Println(err)
+			os.Exit(1)
+		}
+		os.Exit(0)
+	}
+
+	t.Parallel()
+
+	// The test requires a shell that uses job control.
+	bash, err := exec.LookPath("bash")
+	if err != nil {
+		t.Skipf("could not find bash: %v", err)
+	}
+
+	scale := 1
+	if s := os.Getenv("GO_TEST_TIMEOUT_SCALE"); s != "" {
+		if sc, err := strconv.Atoi(s); err == nil {
+			scale = sc
+		}
+	}
+	pause := time.Duration(scale) * 10 * time.Millisecond
+	wait := time.Duration(scale) * 5 * time.Second
+
+	// The test only fails when using a "slow device," in this
+	// case a pseudo-terminal.
+
+	pty, procTTYName, err := ptypkg.Open()
+	if err != nil {
+		ptyErr := err.(*ptypkg.PtyError)
+		if ptyErr.FuncName == "posix_openpt" && ptyErr.Errno == syscall.EACCES {
+			t.Skip("posix_openpt failed with EACCES, assuming chroot and skipping")
+		}
+		t.Fatal(err)
+	}
+	defer pty.Close()
+	procTTY, err := os.OpenFile(procTTYName, os.O_RDWR, 0)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer procTTY.Close()
+
+	// Start an interactive shell.
+	ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
+	defer cancel()
+	cmd := exec.CommandContext(ctx, bash, "--norc", "--noprofile", "-i")
+	// Clear HISTFILE so that we don't read or clobber the user's bash history.
+	cmd.Env = append(os.Environ(), "HISTFILE=")
+	cmd.Stdin = procTTY
+	cmd.Stdout = procTTY
+	cmd.Stderr = procTTY
+	cmd.SysProcAttr = &syscall.SysProcAttr{
+		Setsid:  true,
+		Setctty: true,
+		Ctty:    0,
+	}
+
+	if err := cmd.Start(); err != nil {
+		t.Fatal(err)
+	}
+
+	if err := procTTY.Close(); err != nil {
+		t.Errorf("closing procTTY: %v", err)
+	}
+
+	progReady := make(chan bool)
+	sawPrompt := make(chan bool, 10)
+	const prompt = "prompt> "
+
+	// Read data from pty in the background.
+	var wg sync.WaitGroup
+	wg.Add(1)
+	defer wg.Wait()
+	go func() {
+		defer wg.Done()
+		input := bufio.NewReader(pty)
+		var line, handled []byte
+		for {
+			b, err := input.ReadByte()
+			if err != nil {
+				if len(line) > 0 || len(handled) > 0 {
+					t.Logf("%q", append(handled, line...))
+				}
+				if perr, ok := err.(*fs.PathError); ok {
+					err = perr.Err
+				}
+				// EOF means pty is closed.
+				// EIO means child process is done.
+				// "file already closed" means deferred close of pty has happened.
+				if err != io.EOF && err != syscall.EIO && !strings.Contains(err.Error(), "file already closed") {
+					t.Logf("error reading from pty: %v", err)
+				}
+				return
+			}
+
+			line = append(line, b)
+
+			if b == '\n' {
+				t.Logf("%q", append(handled, line...))
+				line = nil
+				handled = nil
+				continue
+			}
+
+			if bytes.Contains(line, []byte(enteringRead)) {
+				close(progReady)
+				handled = append(handled, line...)
+				line = nil
+			} else if bytes.Contains(line, []byte(prompt)) && !bytes.Contains(line, []byte("PS1=")) {
+				sawPrompt <- true
+				handled = append(handled, line...)
+				line = nil
+			}
+		}
+	}()
+
+	// Set the bash prompt so that we can see it.
+	if _, err := pty.Write([]byte("PS1='" + prompt + "'\n")); err != nil {
+		t.Fatalf("setting prompt: %v", err)
+	}
+	select {
+	case <-sawPrompt:
+	case <-time.After(wait):
+		t.Fatal("timed out waiting for shell prompt")
+	}
+
+	// Start a small program that reads from stdin
+	// (namely the code at the top of this function).
+	if _, err := pty.Write([]byte("GO_TEST_TERMINAL_SIGNALS=1 " + os.Args[0] + " -test.run=TestTerminalSignal\n")); err != nil {
+		t.Fatal(err)
+	}
+
+	// Wait for the program to print that it is starting.
+	select {
+	case <-progReady:
+	case <-time.After(wait):
+		t.Fatal("timed out waiting for program to start")
+	}
+
+	// Give the program time to enter the read call.
+	// It doesn't matter much if we occasionally don't wait long enough;
+	// we won't be testing what we want to test, but the overall test
+	// will pass.
+	time.Sleep(pause)
+
+	// Send a ^Z to stop the program.
+	if _, err := pty.Write([]byte{26}); err != nil {
+		t.Fatalf("writing ^Z to pty: %v", err)
+	}
+
+	// Wait for the program to stop and return to the shell.
+	select {
+	case <-sawPrompt:
+	case <-time.After(wait):
+		t.Fatal("timed out waiting for shell prompt")
+	}
+
+	// Restart the stopped program.
+	if _, err := pty.Write([]byte("fg\n")); err != nil {
+		t.Fatalf("writing %q to pty: %v", "fg", err)
+	}
+
+	// Give the process time to restart.
+	// This is potentially racy: if the process does not restart
+	// quickly enough then the byte we send will go to bash rather
+	// than the program. Unfortunately there isn't anything we can
+	// look for to know that the program is running again.
+	// bash will print the program name, but that happens before it
+	// restarts the program.
+	time.Sleep(10 * pause)
+
+	// Write some data for the program to read,
+	// which should cause it to exit.
+	if _, err := pty.Write([]byte{'\n'}); err != nil {
+		t.Fatalf("writing %q to pty: %v", "\n", err)
+	}
+
+	// Wait for the program to exit.
+	select {
+	case <-sawPrompt:
+	case <-time.After(wait):
+		t.Fatal("timed out waiting for shell prompt")
+	}
+
+	// Exit the shell with the program's exit status.
+	if _, err := pty.Write([]byte("exit $?\n")); err != nil {
+		t.Fatalf("writing %q to pty: %v", "exit", err)
+	}
+
+	if err = cmd.Wait(); err != nil {
+		t.Errorf("subprogram failed: %v", err)
+	}
+}
diff --git a/src/os/signal/signal_linux_test.go b/src/os/signal/signal_linux_test.go
new file mode 100644
index 0000000..2e553d0
--- /dev/null
+++ b/src/os/signal/signal_linux_test.go
@@ -0,0 +1,42 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build linux
+
+package signal
+
+import (
+	"os"
+	"syscall"
+	"testing"
+	"time"
+)
+
+const prSetKeepCaps = 8
+
+// This test validates that syscall.AllThreadsSyscall() can reliably
+// reach all 'm' (threads) of the nocgo runtime even when one thread
+// is blocked waiting to receive signals from the kernel. This monitors
+// for a regression vs. the fix for #43149.
+func TestAllThreadsSyscallSignals(t *testing.T) {
+	if _, _, err := syscall.AllThreadsSyscall(syscall.SYS_PRCTL, prSetKeepCaps, 0, 0); err == syscall.ENOTSUP {
+		t.Skip("AllThreadsSyscall disabled with cgo")
+	}
+
+	sig := make(chan os.Signal, 1)
+	Notify(sig, os.Interrupt)
+
+	for i := 0; i <= 100; i++ {
+		if _, _, errno := syscall.AllThreadsSyscall(syscall.SYS_PRCTL, prSetKeepCaps, uintptr(i&1), 0); errno != 0 {
+			t.Fatalf("[%d] failed to set KEEP_CAPS=%d: %v", i, i&1, errno)
+		}
+	}
+
+	select {
+	case <-time.After(10 * time.Millisecond):
+	case <-sig:
+		t.Fatal("unexpected signal")
+	}
+	Stop(sig)
+}
diff --git a/src/os/signal/signal_plan9.go b/src/os/signal/signal_plan9.go
new file mode 100644
index 0000000..7d48715
--- /dev/null
+++ b/src/os/signal/signal_plan9.go
@@ -0,0 +1,64 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package signal
+
+import (
+	"os"
+	"syscall"
+)
+
+var sigtab = make(map[os.Signal]int)
+
+// Defined by the runtime package.
+func signal_disable(uint32)
+func signal_enable(uint32)
+func signal_ignore(uint32)
+func signal_ignored(uint32) bool
+func signal_recv() string
+
+func init() {
+	watchSignalLoop = loop
+}
+
+func loop() {
+	for {
+		process(syscall.Note(signal_recv()))
+	}
+}
+
+const numSig = 256
+
+func signum(sig os.Signal) int {
+	switch sig := sig.(type) {
+	case syscall.Note:
+		n, ok := sigtab[sig]
+		if !ok {
+			n = len(sigtab) + 1
+			if n > numSig {
+				return -1
+			}
+			sigtab[sig] = n
+		}
+		return n
+	default:
+		return -1
+	}
+}
+
+func enableSignal(sig int) {
+	signal_enable(uint32(sig))
+}
+
+func disableSignal(sig int) {
+	signal_disable(uint32(sig))
+}
+
+func ignoreSignal(sig int) {
+	signal_ignore(uint32(sig))
+}
+
+func signalIgnored(sig int) bool {
+	return signal_ignored(uint32(sig))
+}
diff --git a/src/os/signal/signal_plan9_test.go b/src/os/signal/signal_plan9_test.go
new file mode 100644
index 0000000..10bfdc3
--- /dev/null
+++ b/src/os/signal/signal_plan9_test.go
@@ -0,0 +1,181 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package signal
+
+import (
+	"os"
+	"runtime"
+	"syscall"
+	"testing"
+	"time"
+)
+
+func waitSig(t *testing.T, c <-chan os.Signal, sig os.Signal) {
+	select {
+	case s := <-c:
+		if s != sig {
+			t.Fatalf("signal was %v, want %v", s, sig)
+		}
+	case <-time.After(1 * time.Second):
+		t.Fatalf("timeout waiting for %v", sig)
+	}
+}
+
+// Test that basic signal handling works.
+func TestSignal(t *testing.T) {
+	// Ask for hangup
+	c := make(chan os.Signal, 1)
+	Notify(c, syscall.Note("hangup"))
+	defer Stop(c)
+
+	// Send this process a hangup
+	t.Logf("hangup...")
+	postNote(syscall.Getpid(), "hangup")
+	waitSig(t, c, syscall.Note("hangup"))
+
+	// Ask for everything we can get.
+	c1 := make(chan os.Signal, 1)
+	Notify(c1)
+
+	// Send this process an alarm
+	t.Logf("alarm...")
+	postNote(syscall.Getpid(), "alarm")
+	waitSig(t, c1, syscall.Note("alarm"))
+
+	// Send two more hangups, to make sure that
+	// they get delivered on c1 and that not reading
+	// from c does not block everything.
+	t.Logf("hangup...")
+	postNote(syscall.Getpid(), "hangup")
+	waitSig(t, c1, syscall.Note("hangup"))
+	t.Logf("hangup...")
+	postNote(syscall.Getpid(), "hangup")
+	waitSig(t, c1, syscall.Note("hangup"))
+
+	// The first SIGHUP should be waiting for us on c.
+	waitSig(t, c, syscall.Note("hangup"))
+}
+
+func TestStress(t *testing.T) {
+	dur := 3 * time.Second
+	if testing.Short() {
+		dur = 100 * time.Millisecond
+	}
+	defer runtime.GOMAXPROCS(runtime.GOMAXPROCS(4))
+	done := make(chan bool)
+	finished := make(chan bool)
+	go func() {
+		sig := make(chan os.Signal, 1)
+		Notify(sig, syscall.Note("alarm"))
+		defer Stop(sig)
+	Loop:
+		for {
+			select {
+			case <-sig:
+			case <-done:
+				break Loop
+			}
+		}
+		finished <- true
+	}()
+	go func() {
+	Loop:
+		for {
+			select {
+			case <-done:
+				break Loop
+			default:
+				postNote(syscall.Getpid(), "alarm")
+				runtime.Gosched()
+			}
+		}
+		finished <- true
+	}()
+	time.Sleep(dur)
+	close(done)
+	<-finished
+	<-finished
+	// When run with 'go test -cpu=1,2,4' alarm from this test can slip
+	// into subsequent TestSignal() causing failure.
+	// Sleep for a while to reduce the possibility of the failure.
+	time.Sleep(10 * time.Millisecond)
+}
+
+// Test that Stop cancels the channel's registrations.
+func TestStop(t *testing.T) {
+	if testing.Short() {
+		t.Skip("skipping in short mode")
+	}
+	sigs := []string{
+		"alarm",
+		"hangup",
+	}
+
+	for _, sig := range sigs {
+		// Send the signal.
+		// If it's alarm, we should not see it.
+		// If it's hangup, maybe we'll die. Let the flag tell us what to do.
+		if sig != "hangup" {
+			postNote(syscall.Getpid(), sig)
+		}
+		time.Sleep(100 * time.Millisecond)
+
+		// Ask for signal
+		c := make(chan os.Signal, 1)
+		Notify(c, syscall.Note(sig))
+		defer Stop(c)
+
+		// Send this process that signal
+		postNote(syscall.Getpid(), sig)
+		waitSig(t, c, syscall.Note(sig))
+
+		Stop(c)
+		select {
+		case s := <-c:
+			t.Fatalf("unexpected signal %v", s)
+		case <-time.After(100 * time.Millisecond):
+			// nothing to read - good
+		}
+
+		// Send the signal.
+		// If it's alarm, we should not see it.
+		// If it's hangup, maybe we'll die. Let the flag tell us what to do.
+		if sig != "hangup" {
+			postNote(syscall.Getpid(), sig)
+		}
+
+		select {
+		case s := <-c:
+			t.Fatalf("unexpected signal %v", s)
+		case <-time.After(100 * time.Millisecond):
+			// nothing to read - good
+		}
+	}
+}
+
+func itoa(val int) string {
+	if val < 0 {
+		return "-" + itoa(-val)
+	}
+	var buf [32]byte // big enough for int64
+	i := len(buf) - 1
+	for val >= 10 {
+		buf[i] = byte(val%10 + '0')
+		i--
+		val /= 10
+	}
+	buf[i] = byte(val + '0')
+	return string(buf[i:])
+}
+
+func postNote(pid int, note string) error {
+	f, err := os.OpenFile("/proc/"+itoa(pid)+"/note", os.O_WRONLY, 0)
+	if err != nil {
+		return err
+	}
+	defer f.Close()
+	_, err = f.Write([]byte(note))
+	return err
+}
diff --git a/src/os/signal/signal_test.go b/src/os/signal/signal_test.go
new file mode 100644
index 0000000..9e5ee8b
--- /dev/null
+++ b/src/os/signal/signal_test.go
@@ -0,0 +1,897 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris
+
+package signal
+
+import (
+	"bytes"
+	"context"
+	"flag"
+	"fmt"
+	"internal/testenv"
+	"os"
+	"os/exec"
+	"runtime"
+	"runtime/trace"
+	"strconv"
+	"sync"
+	"syscall"
+	"testing"
+	"time"
+)
+
+// settleTime is an upper bound on how long we expect signals to take to be
+// delivered. Lower values make the test faster, but also flakier — especially
+// on heavily loaded systems.
+//
+// The current value is set based on flakes observed in the Go builders.
+var settleTime = 100 * time.Millisecond
+
+func init() {
+	if testenv.Builder() == "solaris-amd64-oraclerel" {
+		// The solaris-amd64-oraclerel builder has been observed to time out in
+		// TestNohup even with a 250ms settle time.
+		//
+		// Use a much longer settle time on that builder to try to suss out whether
+		// the test is flaky due to builder slowness (which may mean we need a
+		// longer GO_TEST_TIMEOUT_SCALE) or due to a dropped signal (which may
+		// instead need a test-skip and upstream bug filed against the Solaris
+		// kernel).
+		//
+		// This constant is chosen so as to make the test as generous as possible
+		// while still reliably completing within 3 minutes in non-short mode.
+		//
+		// See https://golang.org/issue/33174.
+		settleTime = 11 * time.Second
+	} else if s := os.Getenv("GO_TEST_TIMEOUT_SCALE"); s != "" {
+		if scale, err := strconv.Atoi(s); err == nil {
+			settleTime *= time.Duration(scale)
+		}
+	}
+}
+
+func waitSig(t *testing.T, c <-chan os.Signal, sig os.Signal) {
+	t.Helper()
+	waitSig1(t, c, sig, false)
+}
+func waitSigAll(t *testing.T, c <-chan os.Signal, sig os.Signal) {
+	t.Helper()
+	waitSig1(t, c, sig, true)
+}
+
+func waitSig1(t *testing.T, c <-chan os.Signal, sig os.Signal, all bool) {
+	t.Helper()
+
+	// Sleep multiple times to give the kernel more tries to
+	// deliver the signal.
+	start := time.Now()
+	timer := time.NewTimer(settleTime / 10)
+	defer timer.Stop()
+	// If the caller notified for all signals on c, filter out SIGURG,
+	// which is used for runtime preemption and can come at unpredictable times.
+	// General user code should filter out all unexpected signals instead of just
+	// SIGURG, but since os/signal is tightly coupled to the runtime it seems
+	// appropriate to be stricter here.
+	for time.Since(start) < settleTime {
+		select {
+		case s := <-c:
+			if s == sig {
+				return
+			}
+			if !all || s != syscall.SIGURG {
+				t.Fatalf("signal was %v, want %v", s, sig)
+			}
+		case <-timer.C:
+			timer.Reset(settleTime / 10)
+		}
+	}
+	t.Fatalf("timeout after %v waiting for %v", settleTime, sig)
+}
+
+// quiesce waits until we can be reasonably confident that all pending signals
+// have been delivered by the OS.
+func quiesce() {
+	// The kernel will deliver a signal as a thread returns
+	// from a syscall. If the only active thread is sleeping,
+	// and the system is busy, the kernel may not get around
+	// to waking up a thread to catch the signal.
+	// We try splitting up the sleep to give the kernel
+	// many chances to deliver the signal.
+	start := time.Now()
+	for time.Since(start) < settleTime {
+		time.Sleep(settleTime / 10)
+	}
+}
+
+// Test that basic signal handling works.
+func TestSignal(t *testing.T) {
+	// Ask for SIGHUP
+	c := make(chan os.Signal, 1)
+	Notify(c, syscall.SIGHUP)
+	defer Stop(c)
+
+	// Send this process a SIGHUP
+	t.Logf("sighup...")
+	syscall.Kill(syscall.Getpid(), syscall.SIGHUP)
+	waitSig(t, c, syscall.SIGHUP)
+
+	// Ask for everything we can get. The buffer size has to be
+	// more than 1, since the runtime might send SIGURG signals.
+	// Using 10 is arbitrary.
+	c1 := make(chan os.Signal, 10)
+	Notify(c1)
+
+	// Send this process a SIGWINCH
+	t.Logf("sigwinch...")
+	syscall.Kill(syscall.Getpid(), syscall.SIGWINCH)
+	waitSigAll(t, c1, syscall.SIGWINCH)
+
+	// Send two more SIGHUPs, to make sure that
+	// they get delivered on c1 and that not reading
+	// from c does not block everything.
+	t.Logf("sighup...")
+	syscall.Kill(syscall.Getpid(), syscall.SIGHUP)
+	waitSigAll(t, c1, syscall.SIGHUP)
+	t.Logf("sighup...")
+	syscall.Kill(syscall.Getpid(), syscall.SIGHUP)
+	waitSigAll(t, c1, syscall.SIGHUP)
+
+	// The first SIGHUP should be waiting for us on c.
+	waitSig(t, c, syscall.SIGHUP)
+}
+
+func TestStress(t *testing.T) {
+	dur := 3 * time.Second
+	if testing.Short() {
+		dur = 100 * time.Millisecond
+	}
+	defer runtime.GOMAXPROCS(runtime.GOMAXPROCS(4))
+
+	sig := make(chan os.Signal, 1)
+	Notify(sig, syscall.SIGUSR1)
+
+	go func() {
+		stop := time.After(dur)
+		for {
+			select {
+			case <-stop:
+				// Allow enough time for all signals to be delivered before we stop
+				// listening for them.
+				quiesce()
+				Stop(sig)
+				// According to its documentation, “[w]hen Stop returns, it in
+				// guaranteed that c will receive no more signals.” So we can safely
+				// close sig here: if there is a send-after-close race here, that is a
+				// bug in Stop and we would like to detect it.
+				close(sig)
+				return
+
+			default:
+				syscall.Kill(syscall.Getpid(), syscall.SIGUSR1)
+				runtime.Gosched()
+			}
+		}
+	}()
+
+	for range sig {
+		// Receive signals until the sender closes sig.
+	}
+}
+
+func testCancel(t *testing.T, ignore bool) {
+	// Ask to be notified on c1 when a SIGWINCH is received.
+	c1 := make(chan os.Signal, 1)
+	Notify(c1, syscall.SIGWINCH)
+	defer Stop(c1)
+
+	// Ask to be notified on c2 when a SIGHUP is received.
+	c2 := make(chan os.Signal, 1)
+	Notify(c2, syscall.SIGHUP)
+	defer Stop(c2)
+
+	// Send this process a SIGWINCH and wait for notification on c1.
+	syscall.Kill(syscall.Getpid(), syscall.SIGWINCH)
+	waitSig(t, c1, syscall.SIGWINCH)
+
+	// Send this process a SIGHUP and wait for notification on c2.
+	syscall.Kill(syscall.Getpid(), syscall.SIGHUP)
+	waitSig(t, c2, syscall.SIGHUP)
+
+	// Ignore, or reset the signal handlers for, SIGWINCH and SIGHUP.
+	// Either way, this should undo both calls to Notify above.
+	if ignore {
+		Ignore(syscall.SIGWINCH, syscall.SIGHUP)
+		// Don't bother deferring a call to Reset: it is documented to undo Notify,
+		// but its documentation says nothing about Ignore, and (as of the time of
+		// writing) it empirically does not undo an Ignore.
+	} else {
+		Reset(syscall.SIGWINCH, syscall.SIGHUP)
+	}
+
+	// Send this process a SIGWINCH. It should be ignored.
+	syscall.Kill(syscall.Getpid(), syscall.SIGWINCH)
+
+	// If ignoring, Send this process a SIGHUP. It should be ignored.
+	if ignore {
+		syscall.Kill(syscall.Getpid(), syscall.SIGHUP)
+	}
+
+	quiesce()
+
+	select {
+	case s := <-c1:
+		t.Errorf("unexpected signal %v", s)
+	default:
+		// nothing to read - good
+	}
+
+	select {
+	case s := <-c2:
+		t.Errorf("unexpected signal %v", s)
+	default:
+		// nothing to read - good
+	}
+
+	// One or both of the signals may have been blocked for this process
+	// by the calling process.
+	// Discard any queued signals now to avoid interfering with other tests.
+	Notify(c1, syscall.SIGWINCH)
+	Notify(c2, syscall.SIGHUP)
+	quiesce()
+}
+
+// Test that Reset cancels registration for listed signals on all channels.
+func TestReset(t *testing.T) {
+	testCancel(t, false)
+}
+
+// Test that Ignore cancels registration for listed signals on all channels.
+func TestIgnore(t *testing.T) {
+	testCancel(t, true)
+}
+
+// Test that Ignored correctly detects changes to the ignored status of a signal.
+func TestIgnored(t *testing.T) {
+	// Ask to be notified on SIGWINCH.
+	c := make(chan os.Signal, 1)
+	Notify(c, syscall.SIGWINCH)
+
+	// If we're being notified, then the signal should not be ignored.
+	if Ignored(syscall.SIGWINCH) {
+		t.Errorf("expected SIGWINCH to not be ignored.")
+	}
+	Stop(c)
+	Ignore(syscall.SIGWINCH)
+
+	// We're no longer paying attention to this signal.
+	if !Ignored(syscall.SIGWINCH) {
+		t.Errorf("expected SIGWINCH to be ignored when explicitly ignoring it.")
+	}
+
+	Reset()
+}
+
+var checkSighupIgnored = flag.Bool("check_sighup_ignored", false, "if true, TestDetectNohup will fail if SIGHUP is not ignored.")
+
+// Test that Ignored(SIGHUP) correctly detects whether it is being run under nohup.
+func TestDetectNohup(t *testing.T) {
+	if *checkSighupIgnored {
+		if !Ignored(syscall.SIGHUP) {
+			t.Fatal("SIGHUP is not ignored.")
+		} else {
+			t.Log("SIGHUP is ignored.")
+		}
+	} else {
+		defer Reset()
+		// Ugly: ask for SIGHUP so that child will not have no-hup set
+		// even if test is running under nohup environment.
+		// We have no intention of reading from c.
+		c := make(chan os.Signal, 1)
+		Notify(c, syscall.SIGHUP)
+		if out, err := exec.Command(os.Args[0], "-test.run=TestDetectNohup", "-check_sighup_ignored").CombinedOutput(); err == nil {
+			t.Errorf("ran test with -check_sighup_ignored and it succeeded: expected failure.\nOutput:\n%s", out)
+		}
+		Stop(c)
+		// Again, this time with nohup, assuming we can find it.
+		_, err := os.Stat("/usr/bin/nohup")
+		if err != nil {
+			t.Skip("cannot find nohup; skipping second half of test")
+		}
+		Ignore(syscall.SIGHUP)
+		os.Remove("nohup.out")
+		out, err := exec.Command("/usr/bin/nohup", os.Args[0], "-test.run=TestDetectNohup", "-check_sighup_ignored").CombinedOutput()
+
+		data, _ := os.ReadFile("nohup.out")
+		os.Remove("nohup.out")
+		if err != nil {
+			t.Errorf("ran test with -check_sighup_ignored under nohup and it failed: expected success.\nError: %v\nOutput:\n%s%s", err, out, data)
+		}
+	}
+}
+
+var (
+	sendUncaughtSighup = flag.Int("send_uncaught_sighup", 0, "send uncaught SIGHUP during TestStop")
+	dieFromSighup      = flag.Bool("die_from_sighup", false, "wait to die from uncaught SIGHUP")
+)
+
+// Test that Stop cancels the channel's registrations.
+func TestStop(t *testing.T) {
+	sigs := []syscall.Signal{
+		syscall.SIGWINCH,
+		syscall.SIGHUP,
+		syscall.SIGUSR1,
+	}
+
+	for _, sig := range sigs {
+		sig := sig
+		t.Run(fmt.Sprint(sig), func(t *testing.T) {
+			// When calling Notify with a specific signal,
+			// independent signals should not interfere with each other,
+			// and we end up needing to wait for signals to quiesce a lot.
+			// Test the three different signals concurrently.
+			t.Parallel()
+
+			// If the signal is not ignored, send the signal before registering a
+			// channel to verify the behavior of the default Go handler.
+			// If it's SIGWINCH or SIGUSR1 we should not see it.
+			// If it's SIGHUP, maybe we'll die. Let the flag tell us what to do.
+			mayHaveBlockedSignal := false
+			if !Ignored(sig) && (sig != syscall.SIGHUP || *sendUncaughtSighup == 1) {
+				syscall.Kill(syscall.Getpid(), sig)
+				quiesce()
+
+				// We don't know whether sig is blocked for this process; see
+				// https://golang.org/issue/38165. Assume that it could be.
+				mayHaveBlockedSignal = true
+			}
+
+			// Ask for signal
+			c := make(chan os.Signal, 1)
+			Notify(c, sig)
+
+			// Send this process the signal again.
+			syscall.Kill(syscall.Getpid(), sig)
+			waitSig(t, c, sig)
+
+			if mayHaveBlockedSignal {
+				// We may have received a queued initial signal in addition to the one
+				// that we sent after Notify. If so, waitSig may have observed that
+				// initial signal instead of the second one, and we may need to wait for
+				// the second signal to clear. Do that now.
+				quiesce()
+				select {
+				case <-c:
+				default:
+				}
+			}
+
+			// Stop watching for the signal and send it again.
+			// If it's SIGHUP, maybe we'll die. Let the flag tell us what to do.
+			Stop(c)
+			if sig != syscall.SIGHUP || *sendUncaughtSighup == 2 {
+				syscall.Kill(syscall.Getpid(), sig)
+				quiesce()
+
+				select {
+				case s := <-c:
+					t.Errorf("unexpected signal %v", s)
+				default:
+					// nothing to read - good
+				}
+
+				// If we're going to receive a signal, it has almost certainly been
+				// received by now. However, it may have been blocked for this process —
+				// we don't know. Explicitly unblock it and wait for it to clear now.
+				Notify(c, sig)
+				quiesce()
+				Stop(c)
+			}
+		})
+	}
+}
+
+// Test that when run under nohup, an uncaught SIGHUP does not kill the program.
+func TestNohup(t *testing.T) {
+	// Ugly: ask for SIGHUP so that child will not have no-hup set
+	// even if test is running under nohup environment.
+	// We have no intention of reading from c.
+	c := make(chan os.Signal, 1)
+	Notify(c, syscall.SIGHUP)
+
+	// When run without nohup, the test should crash on an uncaught SIGHUP.
+	// When run under nohup, the test should ignore uncaught SIGHUPs,
+	// because the runtime is not supposed to be listening for them.
+	// Either way, TestStop should still be able to catch them when it wants them
+	// and then when it stops wanting them, the original behavior should resume.
+	//
+	// send_uncaught_sighup=1 sends the SIGHUP before starting to listen for SIGHUPs.
+	// send_uncaught_sighup=2 sends the SIGHUP after no longer listening for SIGHUPs.
+	//
+	// Both should fail without nohup and succeed with nohup.
+
+	var subTimeout time.Duration
+
+	var wg sync.WaitGroup
+	wg.Add(2)
+	if deadline, ok := t.Deadline(); ok {
+		subTimeout = time.Until(deadline)
+		subTimeout -= subTimeout / 10 // Leave 10% headroom for propagating output.
+	}
+	for i := 1; i <= 2; i++ {
+		i := i
+		go t.Run(fmt.Sprintf("uncaught-%d", i), func(t *testing.T) {
+			defer wg.Done()
+
+			args := []string{
+				"-test.v",
+				"-test.run=TestStop",
+				"-send_uncaught_sighup=" + strconv.Itoa(i),
+				"-die_from_sighup",
+			}
+			if subTimeout != 0 {
+				args = append(args, fmt.Sprintf("-test.timeout=%v", subTimeout))
+			}
+			out, err := exec.Command(os.Args[0], args...).CombinedOutput()
+
+			if err == nil {
+				t.Errorf("ran test with -send_uncaught_sighup=%d and it succeeded: expected failure.\nOutput:\n%s", i, out)
+			} else {
+				t.Logf("test with -send_uncaught_sighup=%d failed as expected.\nError: %v\nOutput:\n%s", i, err, out)
+			}
+		})
+	}
+	wg.Wait()
+
+	Stop(c)
+
+	// Skip the nohup test below when running in tmux on darwin, since nohup
+	// doesn't work correctly there. See issue #5135.
+	if runtime.GOOS == "darwin" && os.Getenv("TMUX") != "" {
+		t.Skip("Skipping nohup test due to running in tmux on darwin")
+	}
+
+	// Again, this time with nohup, assuming we can find it.
+	_, err := exec.LookPath("nohup")
+	if err != nil {
+		t.Skip("cannot find nohup; skipping second half of test")
+	}
+
+	wg.Add(2)
+	if deadline, ok := t.Deadline(); ok {
+		subTimeout = time.Until(deadline)
+		subTimeout -= subTimeout / 10 // Leave 10% headroom for propagating output.
+	}
+	for i := 1; i <= 2; i++ {
+		i := i
+		go t.Run(fmt.Sprintf("nohup-%d", i), func(t *testing.T) {
+			defer wg.Done()
+
+			// POSIX specifies that nohup writes to a file named nohup.out if standard
+			// output is a terminal. However, for an exec.Command, standard output is
+			// not a terminal — so we don't need to read or remove that file (and,
+			// indeed, cannot even create it if the current user is unable to write to
+			// GOROOT/src, such as when GOROOT is installed and owned by root).
+
+			args := []string{
+				os.Args[0],
+				"-test.v",
+				"-test.run=TestStop",
+				"-send_uncaught_sighup=" + strconv.Itoa(i),
+			}
+			if subTimeout != 0 {
+				args = append(args, fmt.Sprintf("-test.timeout=%v", subTimeout))
+			}
+			out, err := exec.Command("nohup", args...).CombinedOutput()
+
+			if err != nil {
+				t.Errorf("ran test with -send_uncaught_sighup=%d under nohup and it failed: expected success.\nError: %v\nOutput:\n%s", i, err, out)
+			} else {
+				t.Logf("ran test with -send_uncaught_sighup=%d under nohup.\nOutput:\n%s", i, out)
+			}
+		})
+	}
+	wg.Wait()
+}
+
+// Test that SIGCONT works (issue 8953).
+func TestSIGCONT(t *testing.T) {
+	c := make(chan os.Signal, 1)
+	Notify(c, syscall.SIGCONT)
+	defer Stop(c)
+	syscall.Kill(syscall.Getpid(), syscall.SIGCONT)
+	waitSig(t, c, syscall.SIGCONT)
+}
+
+// Test race between stopping and receiving a signal (issue 14571).
+func TestAtomicStop(t *testing.T) {
+	if os.Getenv("GO_TEST_ATOMIC_STOP") != "" {
+		atomicStopTestProgram(t)
+		t.Fatal("atomicStopTestProgram returned")
+	}
+
+	testenv.MustHaveExec(t)
+
+	// Call Notify for SIGINT before starting the child process.
+	// That ensures that SIGINT is not ignored for the child.
+	// This is necessary because if SIGINT is ignored when a
+	// Go program starts, then it remains ignored, and closing
+	// the last notification channel for SIGINT will switch it
+	// back to being ignored. In that case the assumption of
+	// atomicStopTestProgram, that it will either die from SIGINT
+	// or have it be reported, breaks down, as there is a third
+	// option: SIGINT might be ignored.
+	cs := make(chan os.Signal, 1)
+	Notify(cs, syscall.SIGINT)
+	defer Stop(cs)
+
+	const execs = 10
+	for i := 0; i < execs; i++ {
+		timeout := "0"
+		if deadline, ok := t.Deadline(); ok {
+			timeout = time.Until(deadline).String()
+		}
+		cmd := exec.Command(os.Args[0], "-test.run=TestAtomicStop", "-test.timeout="+timeout)
+		cmd.Env = append(os.Environ(), "GO_TEST_ATOMIC_STOP=1")
+		out, err := cmd.CombinedOutput()
+		if err == nil {
+			if len(out) > 0 {
+				t.Logf("iteration %d: output %s", i, out)
+			}
+		} else {
+			t.Logf("iteration %d: exit status %q: output: %s", i, err, out)
+		}
+
+		lost := bytes.Contains(out, []byte("lost signal"))
+		if lost {
+			t.Errorf("iteration %d: lost signal", i)
+		}
+
+		// The program should either die due to SIGINT,
+		// or exit with success without printing "lost signal".
+		if err == nil {
+			if len(out) > 0 && !lost {
+				t.Errorf("iteration %d: unexpected output", i)
+			}
+		} else {
+			if ee, ok := err.(*exec.ExitError); !ok {
+				t.Errorf("iteration %d: error (%v) has type %T; expected exec.ExitError", i, err, err)
+			} else if ws, ok := ee.Sys().(syscall.WaitStatus); !ok {
+				t.Errorf("iteration %d: error.Sys (%v) has type %T; expected syscall.WaitStatus", i, ee.Sys(), ee.Sys())
+			} else if !ws.Signaled() || ws.Signal() != syscall.SIGINT {
+				t.Errorf("iteration %d: got exit status %v; expected SIGINT", i, ee)
+			}
+		}
+	}
+}
+
+// atomicStopTestProgram is run in a subprocess by TestAtomicStop.
+// It tries to trigger a signal delivery race. This function should
+// either catch a signal or die from it.
+func atomicStopTestProgram(t *testing.T) {
+	// This test won't work if SIGINT is ignored here.
+	if Ignored(syscall.SIGINT) {
+		fmt.Println("SIGINT is ignored")
+		os.Exit(1)
+	}
+
+	const tries = 10
+
+	timeout := 2 * time.Second
+	if deadline, ok := t.Deadline(); ok {
+		// Give each try an equal slice of the deadline, with one slice to spare for
+		// cleanup.
+		timeout = time.Until(deadline) / (tries + 1)
+	}
+
+	pid := syscall.Getpid()
+	printed := false
+	for i := 0; i < tries; i++ {
+		cs := make(chan os.Signal, 1)
+		Notify(cs, syscall.SIGINT)
+
+		var wg sync.WaitGroup
+		wg.Add(1)
+		go func() {
+			defer wg.Done()
+			Stop(cs)
+		}()
+
+		syscall.Kill(pid, syscall.SIGINT)
+
+		// At this point we should either die from SIGINT or
+		// get a notification on cs. If neither happens, we
+		// dropped the signal. It is given 2 seconds to
+		// deliver, as needed for gccgo on some loaded test systems.
+
+		select {
+		case <-cs:
+		case <-time.After(timeout):
+			if !printed {
+				fmt.Print("lost signal on tries:")
+				printed = true
+			}
+			fmt.Printf(" %d", i)
+		}
+
+		wg.Wait()
+	}
+	if printed {
+		fmt.Print("\n")
+	}
+
+	os.Exit(0)
+}
+
+func TestTime(t *testing.T) {
+	// Test that signal works fine when we are in a call to get time,
+	// which on some platforms is using VDSO. See issue #34391.
+	dur := 3 * time.Second
+	if testing.Short() {
+		dur = 100 * time.Millisecond
+	}
+	defer runtime.GOMAXPROCS(runtime.GOMAXPROCS(4))
+
+	sig := make(chan os.Signal, 1)
+	Notify(sig, syscall.SIGUSR1)
+
+	stop := make(chan struct{})
+	go func() {
+		for {
+			select {
+			case <-stop:
+				// Allow enough time for all signals to be delivered before we stop
+				// listening for them.
+				quiesce()
+				Stop(sig)
+				// According to its documentation, “[w]hen Stop returns, it in
+				// guaranteed that c will receive no more signals.” So we can safely
+				// close sig here: if there is a send-after-close race, that is a bug in
+				// Stop and we would like to detect it.
+				close(sig)
+				return
+
+			default:
+				syscall.Kill(syscall.Getpid(), syscall.SIGUSR1)
+				runtime.Gosched()
+			}
+		}
+	}()
+
+	done := make(chan struct{})
+	go func() {
+		for range sig {
+			// Receive signals until the sender closes sig.
+		}
+		close(done)
+	}()
+
+	t0 := time.Now()
+	for t1 := t0; t1.Sub(t0) < dur; t1 = time.Now() {
+	} // hammering on getting time
+
+	close(stop)
+	<-done
+}
+
+var (
+	checkNotifyContext = flag.Bool("check_notify_ctx", false, "if true, TestNotifyContext will fail if SIGINT is not received.")
+	ctxNotifyTimes     = flag.Int("ctx_notify_times", 1, "number of times a SIGINT signal should be received")
+)
+
+func TestNotifyContextNotifications(t *testing.T) {
+	if *checkNotifyContext {
+		ctx, _ := NotifyContext(context.Background(), syscall.SIGINT)
+		// We want to make sure not to be calling Stop() internally on NotifyContext() when processing a received signal.
+		// Being able to wait for a number of received system signals allows us to do so.
+		var wg sync.WaitGroup
+		n := *ctxNotifyTimes
+		wg.Add(n)
+		for i := 0; i < n; i++ {
+			go func() {
+				syscall.Kill(syscall.Getpid(), syscall.SIGINT)
+				wg.Done()
+			}()
+		}
+		wg.Wait()
+		<-ctx.Done()
+		fmt.Print("received SIGINT")
+		// Sleep to give time to simultaneous signals to reach the process.
+		// These signals must be ignored given stop() is not called on this code.
+		// We want to guarantee a SIGINT doesn't cause a premature termination of the program.
+		time.Sleep(settleTime)
+		return
+	}
+
+	t.Parallel()
+	testCases := []struct {
+		name string
+		n    int // number of times a SIGINT should be notified.
+	}{
+		{"once", 1},
+		{"multiple", 10},
+	}
+	for _, tc := range testCases {
+		t.Run(tc.name, func(t *testing.T) {
+			var subTimeout time.Duration
+			if deadline, ok := t.Deadline(); ok {
+				subTimeout := time.Until(deadline)
+				subTimeout -= subTimeout / 10 // Leave 10% headroom for cleaning up subprocess.
+			}
+
+			args := []string{
+				"-test.v",
+				"-test.run=TestNotifyContextNotifications$",
+				"-check_notify_ctx",
+				fmt.Sprintf("-ctx_notify_times=%d", tc.n),
+			}
+			if subTimeout != 0 {
+				args = append(args, fmt.Sprintf("-test.timeout=%v", subTimeout))
+			}
+			out, err := exec.Command(os.Args[0], args...).CombinedOutput()
+			if err != nil {
+				t.Errorf("ran test with -check_notify_ctx_notification and it failed with %v.\nOutput:\n%s", err, out)
+			}
+			if want := []byte("received SIGINT"); !bytes.Contains(out, want) {
+				t.Errorf("got %q, wanted %q", out, want)
+			}
+		})
+	}
+}
+
+func TestNotifyContextStop(t *testing.T) {
+	Ignore(syscall.SIGHUP)
+	if !Ignored(syscall.SIGHUP) {
+		t.Errorf("expected SIGHUP to be ignored when explicitly ignoring it.")
+	}
+
+	parent, cancelParent := context.WithCancel(context.Background())
+	defer cancelParent()
+	c, stop := NotifyContext(parent, syscall.SIGHUP)
+	defer stop()
+
+	// If we're being notified, then the signal should not be ignored.
+	if Ignored(syscall.SIGHUP) {
+		t.Errorf("expected SIGHUP to not be ignored.")
+	}
+
+	if want, got := "signal.NotifyContext(context.Background.WithCancel, [hangup])", fmt.Sprint(c); want != got {
+		t.Errorf("c.String() = %q, wanted %q", got, want)
+	}
+
+	stop()
+	select {
+	case <-c.Done():
+		if got := c.Err(); got != context.Canceled {
+			t.Errorf("c.Err() = %q, want %q", got, context.Canceled)
+		}
+	case <-time.After(time.Second):
+		t.Errorf("timed out waiting for context to be done after calling stop")
+	}
+}
+
+func TestNotifyContextCancelParent(t *testing.T) {
+	parent, cancelParent := context.WithCancel(context.Background())
+	defer cancelParent()
+	c, stop := NotifyContext(parent, syscall.SIGINT)
+	defer stop()
+
+	if want, got := "signal.NotifyContext(context.Background.WithCancel, [interrupt])", fmt.Sprint(c); want != got {
+		t.Errorf("c.String() = %q, want %q", got, want)
+	}
+
+	cancelParent()
+	select {
+	case <-c.Done():
+		if got := c.Err(); got != context.Canceled {
+			t.Errorf("c.Err() = %q, want %q", got, context.Canceled)
+		}
+	case <-time.After(time.Second):
+		t.Errorf("timed out waiting for parent context to be canceled")
+	}
+}
+
+func TestNotifyContextPrematureCancelParent(t *testing.T) {
+	parent, cancelParent := context.WithCancel(context.Background())
+	defer cancelParent()
+
+	cancelParent() // Prematurely cancel context before calling NotifyContext.
+	c, stop := NotifyContext(parent, syscall.SIGINT)
+	defer stop()
+
+	if want, got := "signal.NotifyContext(context.Background.WithCancel, [interrupt])", fmt.Sprint(c); want != got {
+		t.Errorf("c.String() = %q, want %q", got, want)
+	}
+
+	select {
+	case <-c.Done():
+		if got := c.Err(); got != context.Canceled {
+			t.Errorf("c.Err() = %q, want %q", got, context.Canceled)
+		}
+	case <-time.After(time.Second):
+		t.Errorf("timed out waiting for parent context to be canceled")
+	}
+}
+
+func TestNotifyContextSimultaneousStop(t *testing.T) {
+	c, stop := NotifyContext(context.Background(), syscall.SIGINT)
+	defer stop()
+
+	if want, got := "signal.NotifyContext(context.Background, [interrupt])", fmt.Sprint(c); want != got {
+		t.Errorf("c.String() = %q, want %q", got, want)
+	}
+
+	var wg sync.WaitGroup
+	n := 10
+	wg.Add(n)
+	for i := 0; i < n; i++ {
+		go func() {
+			stop()
+			wg.Done()
+		}()
+	}
+	wg.Wait()
+	select {
+	case <-c.Done():
+		if got := c.Err(); got != context.Canceled {
+			t.Errorf("c.Err() = %q, want %q", got, context.Canceled)
+		}
+	case <-time.After(time.Second):
+		t.Errorf("expected context to be canceled")
+	}
+}
+
+func TestNotifyContextStringer(t *testing.T) {
+	parent, cancelParent := context.WithCancel(context.Background())
+	defer cancelParent()
+	c, stop := NotifyContext(parent, syscall.SIGHUP, syscall.SIGINT, syscall.SIGTERM)
+	defer stop()
+
+	want := `signal.NotifyContext(context.Background.WithCancel, [hangup interrupt terminated])`
+	if got := fmt.Sprint(c); got != want {
+		t.Errorf("c.String() = %q, want %q", got, want)
+	}
+}
+
+// #44193 test signal handling while stopping and starting the world.
+func TestSignalTrace(t *testing.T) {
+	done := make(chan struct{})
+	quit := make(chan struct{})
+	c := make(chan os.Signal, 1)
+	Notify(c, syscall.SIGHUP)
+
+	// Source and sink for signals busy loop unsynchronized with
+	// trace starts and stops. We are ultimately validating that
+	// signals and runtime.(stop|start)TheWorldGC are compatible.
+	go func() {
+		defer close(done)
+		defer Stop(c)
+		pid := syscall.Getpid()
+		for {
+			select {
+			case <-quit:
+				return
+			default:
+				syscall.Kill(pid, syscall.SIGHUP)
+			}
+			waitSig(t, c, syscall.SIGHUP)
+		}
+	}()
+
+	for i := 0; i < 100; i++ {
+		buf := new(bytes.Buffer)
+		if err := trace.Start(buf); err != nil {
+			t.Fatalf("[%d] failed to start tracing: %v", i, err)
+		}
+		time.After(1 * time.Microsecond)
+		trace.Stop()
+		size := buf.Len()
+		if size == 0 {
+			t.Fatalf("[%d] trace is empty", i)
+		}
+	}
+	close(quit)
+	<-done
+}
diff --git a/src/os/signal/signal_unix.go b/src/os/signal/signal_unix.go
new file mode 100644
index 0000000..90a1eca
--- /dev/null
+++ b/src/os/signal/signal_unix.go
@@ -0,0 +1,62 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix darwin dragonfly freebsd js,wasm linux netbsd openbsd solaris windows
+
+package signal
+
+import (
+	"os"
+	"syscall"
+)
+
+// Defined by the runtime package.
+func signal_disable(uint32)
+func signal_enable(uint32)
+func signal_ignore(uint32)
+func signal_ignored(uint32) bool
+func signal_recv() uint32
+
+func loop() {
+	for {
+		process(syscall.Signal(signal_recv()))
+	}
+}
+
+func init() {
+	watchSignalLoop = loop
+}
+
+const (
+	numSig = 65 // max across all systems
+)
+
+func signum(sig os.Signal) int {
+	switch sig := sig.(type) {
+	case syscall.Signal:
+		i := int(sig)
+		if i < 0 || i >= numSig {
+			return -1
+		}
+		return i
+	default:
+		return -1
+	}
+}
+
+func enableSignal(sig int) {
+	signal_enable(uint32(sig))
+}
+
+func disableSignal(sig int) {
+	signal_disable(uint32(sig))
+}
+
+func ignoreSignal(sig int) {
+	signal_ignore(uint32(sig))
+}
+
+func signalIgnored(sig int) bool {
+	return signal_ignored(uint32(sig))
+}
diff --git a/src/os/signal/signal_windows_test.go b/src/os/signal/signal_windows_test.go
new file mode 100644
index 0000000..4640428
--- /dev/null
+++ b/src/os/signal/signal_windows_test.go
@@ -0,0 +1,103 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package signal
+
+import (
+	"bytes"
+	"internal/testenv"
+	"os"
+	"os/exec"
+	"path/filepath"
+	"syscall"
+	"testing"
+	"time"
+)
+
+func sendCtrlBreak(t *testing.T, pid int) {
+	d, e := syscall.LoadDLL("kernel32.dll")
+	if e != nil {
+		t.Fatalf("LoadDLL: %v\n", e)
+	}
+	p, e := d.FindProc("GenerateConsoleCtrlEvent")
+	if e != nil {
+		t.Fatalf("FindProc: %v\n", e)
+	}
+	r, _, e := p.Call(syscall.CTRL_BREAK_EVENT, uintptr(pid))
+	if r == 0 {
+		t.Fatalf("GenerateConsoleCtrlEvent: %v\n", e)
+	}
+}
+
+func TestCtrlBreak(t *testing.T) {
+	// create source file
+	const source = `
+package main
+
+import (
+	"log"
+	"os"
+	"os/signal"
+	"time"
+)
+
+
+func main() {
+	c := make(chan os.Signal, 10)
+	signal.Notify(c)
+	select {
+	case s := <-c:
+		if s != os.Interrupt {
+			log.Fatalf("Wrong signal received: got %q, want %q\n", s, os.Interrupt)
+		}
+	case <-time.After(3 * time.Second):
+		log.Fatalf("Timeout waiting for Ctrl+Break\n")
+	}
+}
+`
+	tmp, err := os.MkdirTemp("", "TestCtrlBreak")
+	if err != nil {
+		t.Fatal("TempDir failed: ", err)
+	}
+	defer os.RemoveAll(tmp)
+
+	// write ctrlbreak.go
+	name := filepath.Join(tmp, "ctlbreak")
+	src := name + ".go"
+	f, err := os.Create(src)
+	if err != nil {
+		t.Fatalf("Failed to create %v: %v", src, err)
+	}
+	defer f.Close()
+	f.Write([]byte(source))
+
+	// compile it
+	exe := name + ".exe"
+	defer os.Remove(exe)
+	o, err := exec.Command(testenv.GoToolPath(t), "build", "-o", exe, src).CombinedOutput()
+	if err != nil {
+		t.Fatalf("Failed to compile: %v\n%v", err, string(o))
+	}
+
+	// run it
+	cmd := exec.Command(exe)
+	var b bytes.Buffer
+	cmd.Stdout = &b
+	cmd.Stderr = &b
+	cmd.SysProcAttr = &syscall.SysProcAttr{
+		CreationFlags: syscall.CREATE_NEW_PROCESS_GROUP,
+	}
+	err = cmd.Start()
+	if err != nil {
+		t.Fatalf("Start failed: %v", err)
+	}
+	go func() {
+		time.Sleep(1 * time.Second)
+		sendCtrlBreak(t, cmd.Process.Pid)
+	}()
+	err = cmd.Wait()
+	if err != nil {
+		t.Fatalf("Program exited with error: %v\n%v", err, string(b.Bytes()))
+	}
+}