diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 11:36:04 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 11:36:04 +0000 |
commit | 040eee1aa49b49df4698d83a05af57c220127fd1 (patch) | |
tree | f635435954e6ccde5eee9893889e24f30ca68346 /doc/examples/kea6/shared-network.json | |
parent | Initial commit. (diff) | |
download | isc-kea-040eee1aa49b49df4698d83a05af57c220127fd1.tar.xz isc-kea-040eee1aa49b49df4698d83a05af57c220127fd1.zip |
Adding upstream version 2.2.0.upstream/2.2.0upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'doc/examples/kea6/shared-network.json')
-rw-r--r-- | doc/examples/kea6/shared-network.json | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/doc/examples/kea6/shared-network.json b/doc/examples/kea6/shared-network.json new file mode 100644 index 0000000..5666e01 --- /dev/null +++ b/doc/examples/kea6/shared-network.json @@ -0,0 +1,150 @@ +// This is an example configuration file for DHCPv6 server in Kea. +// It demonstrates an advanced feature called shared network. Typically, for +// each physical link there is one IPv6 subnet that the server is expected +// to manage. However, in some cases there is a need to configure more subnets +// in the same physical location. This may sound odd, as IPv6 is not expected +// to run out of addresses. However, due to vast address space some deployments +// experiment with various addressing schemes and later find out that the +// initial proposal was not best and way to migrate to something else. +{ + "Dhcp6": { + // Kea is told to listen on eth0 interface only. + "interfaces-config": { + "interfaces": [ "eth0" ] + }, + + // You also need to tell where to store lease information. + // memfile is the backend that is easiest to set up. + "lease-database": { + "type": "memfile", + "lfc-interval": 3600 + }, + + // It is likely that in your network you'll have a mix of regular, + // "plain" subnets and shared networks. It is perfectly valid to mix + // them in the same config file. + // + // This is regular subnet. It's not part of any shared-network. + "subnet6": [ + { + "pools": [ { "pool": "2001:db8:2::/80" } ], + "subnet": "2001:db8:2::/64", + "interface": "eth0" + } + ], + + // Hhe shared networks definition starts here. shared-networks can + // contain a list of shared networks. There are many parameters + // that can be specified here, so this example may be overwhelming + // at first, but the only mandatory parameter for each shared + // network is name. It must be unique. Typically, each shared + // network also needs to have at least two subnets to be functional, + // but if you really want to, you can define a degraded shared + // network that has 1 or even 0 subnets. This may come in handy + // when migrating between regular subnets and shared networks + // or when debugging a problem. It is not recommended to use + // 1 subnet per shared network, as there is extra processing + // overhead for shared networks. + "shared-networks": [ + { + "interface": "eth1", + + // Similar to regular subnets, it is forbidden to define both + // interface and interface-id at the same time. That's because + // interface parameter expresses physical network interface + // for links available locally and interface-id identifies + // values inserted by relays, which are only used for + // remote traffic. A shared network cannot be both direct + // and relayed. + //"interface-id": "content of the option", + + // Other parameters defined here will be inherited by the + // subnets. + "name": "frog", + "option-data": [ ], + "preferred-lifetime": 200, + "rapid-commit": true, + "rebind-timer": 150, + "relay": { + "ip-address": "2001:db8::1" + }, + "renew-timer": 100, + + // "reservation-mode": "all", + // It is replaced by the "reservations-global", + // "reservations-in-subnet" and "reservations-out-of-pool" + // parameters. + + // Specify if server should lookup global reservations. + "reservations-global": false, + + // Specify if server should lookup in-subnet reservations. + "reservations-in-subnet": true, + + // Specify if server can assume that all reserved addresses + // are out-of-pool. + // Ignored when reservations-in-subnet is false. + // If specified, it is inherited by "subnet6" levels. + "reservations-out-of-pool": false, + + // List of subnets belonging to this particular shared-network + // start here. + "subnet6": [ + + // This is the first subnet. + { + "preferred-lifetime": 30, + "rapid-commit": false, + "rebind-timer": 20, + // It is possible to override some values here. + "relay": { + "ip-address": "2001:db8:1::123" + }, + "renew-timer": 10, + // "reservation-mode": "all", + // It is replaced by the "reservations-global", + // "reservations-in-subnet" and "reservations-out-of-pool" + // parameters. + // Specify if server should lookup global reservations. + "reservations-global": false, + // Specify if server should lookup in-subnet reservations. + "reservations-in-subnet": true, + // Specify if server can assume that all reserved addresses + // are out-of-pool. + // Ignored when reservations-in-subnet is false. + "reservations-out-of-pool": false, + "subnet": "2001:db8:1::/64", + "pools": [ { "pool": "2001:db8:1:0:abcd::/80" } ], + "valid-lifetime": 40 + }, + + // This is the second subnet. + { + "preferred-lifetime": 30, + "pools": [ { "pool": "3000:db8::/64" } ], + "rapid-commit": false, + "rebind-timer": 20, + "relay": { + "ip-address": "3000::1" + }, + "renew-timer": 10, + // "reservation-mode": "all", + // It is replaced by the "reservations-global", + // "reservations-in-subnet" and "reservations-out-of-pool" + // parameters. + // Specify if server should lookup global reservations. + "reservations-global": false, + // Specify if server should lookup in-subnet reservations. + "reservations-in-subnet": true, + // Specify if server can assume that all reserved addresses + // are out-of-pool. + // Ignored when reservations-in-subnet is false. + "reservations-out-of-pool": false, + "subnet": "3000::/16", + "valid-lifetime": 40 + } + ], + "valid-lifetime": 300 + } ] + } +} |