summaryrefslogtreecommitdiffstats
path: root/doc/examples/kea4/pgsql-reservations.json
diff options
context:
space:
mode:
Diffstat (limited to 'doc/examples/kea4/pgsql-reservations.json')
-rw-r--r--doc/examples/kea4/pgsql-reservations.json101
1 files changed, 101 insertions, 0 deletions
diff --git a/doc/examples/kea4/pgsql-reservations.json b/doc/examples/kea4/pgsql-reservations.json
new file mode 100644
index 0000000..9f6d301
--- /dev/null
+++ b/doc/examples/kea4/pgsql-reservations.json
@@ -0,0 +1,101 @@
+// This is an example configuration file for the DHCPv4 server in Kea.
+// It contains configuration of the PostgreSQL host database backend, used
+// to retrieve reserved addresses, host names, DHCPv4 message fields
+// and DHCP options from PostgreSQL database.
+{ "Dhcp4":
+
+{
+// Kea is told to listen on eth0 interface only.
+ "interfaces-config": {
+ "interfaces": [ "eth0" ]
+ },
+
+
+// We need to specify the database used to store leases. As of
+// June 2022, three database backends are supported: MySQL,
+// PostgreSQL and the in-memory database, Memfile.
+// We'll use memfile because it doesn't require any prior set up.
+ "lease-database": {
+ "type": "memfile"
+ },
+
+// Addresses will be assigned with a lifetime of 4000 seconds.
+ "valid-lifetime": 4000,
+
+// Renew and rebind timers are commented out. This implies that options
+// 58 and 59 will not be sent to the client. In this case it is up to
+// the client to pick the timer values according to RFC2131. Uncomment the
+// timers to send these options to the client.
+// "renew-timer": 1000,
+// "rebind-timer": 2000,
+
+
+// Kea supports reservations by several different types of
+// identifiers: hw-address (hardware/MAC address of the client), duid
+// (DUID inserted by the client), client-id (client identifier inserted
+// by the client) and circuit-id (circuit identifier inserted by the
+// relay agent). When told to do so, Kea can check for all of those
+// identifier types, but it takes a costly database lookup to do so. It
+// is therefore useful from a performance perspective to use only the
+// reservation types that are actually used in a given network.
+
+// The example below is not optimal from a performance perspective, but it
+// nicely showcases the host reservation capabilities. Please use the minimum
+// set of identifier types used in your network.
+ "host-reservation-identifiers":
+ [ "circuit-id", "hw-address", "duid", "client-id" ],
+
+// Specify connection to the database holding host reservations. The type
+// specifies that the PostgreSQL database is used. user and password are the
+// credentials used to connect to the database. host and name specify
+// location of the host where the database instance is running, and the
+// name of the database to use. The server processing a packet will first
+// check if there are any reservations specified for this client in the
+// reservations list, within the subnet (configuration file). If there are
+// no reservations there, the server will try to retrieve reservations
+// from this database.
+// The database specification can go into one hosts-database entry for
+// backward compatibility or be listed in hosts-databases list.
+ "hosts-databases": [
+ {
+ "type": "postgresql",
+ "reconnect-wait-time": 3000, // expressed in ms
+ "max-reconnect-tries": 3,
+ "name": "keatest",
+ "user": "keatest",
+ "password": "keatest",
+ "host": "localhost"
+ }
+ ],
+
+// Define a subnet with a single pool of dynamic addresses. Addresses from
+// this pool will be assigned to clients which don't have reservations in the
+// database. Subnet identifier is equal to 1. If this subnet is selected for
+// the client, this subnet id will be used to search for the reservations
+// within the database.
+ "subnet4": [
+ {
+ "pools": [ { "pool": "192.0.2.10 - 192.0.2.200" } ],
+ "subnet": "192.0.2.0/24",
+ "interface": "eth0",
+ "id": 1
+ }
+ ],
+
+// The following configures logging. It assumes that messages with at
+// least informational level (info, warn, error and fatal) should be
+// logged to stdout.
+ "loggers": [
+ {
+ "name": "kea-dhcp4",
+ "output_options": [
+ {
+ "output": "stdout"
+ }
+ ],
+ "severity": "INFO"
+ }
+ ]
+}
+
+}