Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 269 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
new file mode 100644
index 000000000..9403b235e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
+
+maintainers:
+  - Ramesh Shanmugasundaram <rashanmu@gmail.com>
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+description: |
+  R-Car Gen3 DRIF is a SPI like receive only slave device. A general
+  representation of DRIF interfacing with a master device is shown below.
+
+  +---------------------+                +---------------------+
+  |                     |-----SCK------->|CLK                  |
+  |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  |                     |-----SD0------->|D0                   |
+  |                     |-----SD1------->|D1                   |
+  +---------------------+                +---------------------+
+
+  As per datasheet, each DRIF channel (drifn) is made up of two internal
+  channels (drifn0 & drifn1). These two internal channels share the common
+  CLK & SYNC. Each internal channel has its own dedicated resources like
+  irq, dma channels, address space & clock. This internal split is not
+  visible to the external master device.
+
+  The device tree model represents each internal channel as a separate node.
+  The internal channels sharing the CLK & SYNC are tied together by their
+  phandles using a property called "renesas,bonding". For the rest of
+  the documentation, unless explicitly stated, the word channel implies an
+  internal channel.
+
+  When both internal channels are enabled they need to be managed together
+  as one (i.e.) they cannot operate alone as independent devices. Out of the
+  two, one of them needs to act as a primary device that accepts common
+  properties of both the internal channels. This channel is identified by a
+  property called "renesas,primary-bond".
+
+  To summarize,
+     * When both the internal channels that are bonded together are enabled,
+       the zeroth channel is selected as primary-bond. This channels accepts
+       properties common to all the members of the bond.
+     * When only one of the bonded channels need to be enabled, the property
+       "renesas,bonding" or "renesas,primary-bond" will have no effect. That
+       enabled channel can act alone as any other independent device.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-drif        # R-Car H3
+          - renesas,r8a7796-drif        # R-Car M3-W
+          - renesas,r8a77965-drif       # R-Car M3-N
+          - renesas,r8a77990-drif       # R-Car E3
+      - const: renesas,rcar-gen3-drif   # Generic R-Car Gen3 compatible device
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: rx
+
+  renesas,bonding:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the other internal channel of DRIF
+
+  power-domains:
+    maxItems: 1
+
+  renesas,primary-bond:
+    type: boolean
+    description:
+      Indicates that the channel acts as primary among the bonded channels.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Child port node corresponding to the data input. The port node must
+      contain at least one endpoint.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          sync-active:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1]
+            description:
+              Indicates sync signal polarity, 0/1 for low/high respectively.
+              This property maps to SYNCAC bit in the hardware manual. The
+              default is 1 (active high).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - renesas,bonding
+  - power-domains
+
+allOf:
+  - if:
+      required:
+        - renesas,primary-bond
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+        - port
+
+  - if:
+      required:
+        - port
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+    else:
+      properties:
+        pinctrl-0: false
+        pinctrl-names: false
+
+additionalProperties: false
+
+examples:
+  # Example with both internal channels enabled.
+  #
+  # When interfacing with a third party tuner device with two data pins as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |-----SD0------->|D0                   |
+  # |                     |-----SD1------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif00: rif@e6f40000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f40000 0 0x64>;
+                    interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 515>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif01>;
+                    resets = <&cpg 515>;
+                    renesas,primary-bond;
+                    pinctrl-0 = <&drif0_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif0_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep>;
+                            };
+                    };
+            };
+
+            drif01: rif@e6f50000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f50000 0 0x64>;
+                    interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 514>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif00>;
+                    resets = <&cpg 514>;
+            };
+    };
+
+  # Example with internal channel 1 alone enabled.
+  #
+  # When interfacing with a third party tuner device with one data pin as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |                |D0 (unused)          |
+  # |                     |-----SD-------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif10: rif@e6f60000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f60000 0 0x64>;
+                    interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 513>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 513>;
+                    renesas,bonding = <&drif11>;
+            };
+
+            drif11: rif@e6f70000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f70000 0 0x64>;
+                    interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 512>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 512>;
+                    renesas,bonding = <&drif10>;
+                    pinctrl-0 = <&drif1_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif1_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep1>;
+                                 sync-active = <0>;
+                            };
+                    };
+            };
+    };
+...