Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 249 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
new file mode 100644
index 000000000..2fa44951c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SoC External Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The External Memory Controller (EMC) interfaces with the off-chip SDRAM to
+  service the request stream sent from Memory Controller. The EMC also has
+  various performance-affecting settings beyond the obvious SDRAM configuration
+  parameters and initialization settings. Tegra20 EMC supports multiple JEDEC
+  standard protocols: DDR1, LPDDR2 and DDR2.
+
+properties:
+  compatible:
+    const: nvidia,tegra20-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interconnect-cells":
+    const: 0
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the Memory Controller node.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC process ID mask.
+
+  nvidia,use-ram-code:
+    type: boolean
+    description:
+      If present, the emc-tables@ sub-nodes will be addressed.
+
+$defs:
+  emc-table:
+    type: object
+    properties:
+      compatible:
+        const: nvidia,tegra20-emc-table
+
+      clock-frequency:
+        description:
+          Memory clock rate in kHz.
+        minimum: 1000
+        maximum: 900000
+
+      reg:
+        maxItems: 1
+        description:
+          Either an opaque enumerator to tell different tables apart, or
+          the valid frequency for which the table should be used (in kHz).
+
+      nvidia,emc-registers:
+        description:
+          EMC timing characterization data. These are the registers
+          (see section "15.4.1 EMC Registers" in the TRM) whose values
+          need to be specified, according to the board documentation.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: EMC_RC
+          - description: EMC_RFC
+          - description: EMC_RAS
+          - description: EMC_RP
+          - description: EMC_R2W
+          - description: EMC_W2R
+          - description: EMC_R2P
+          - description: EMC_W2P
+          - description: EMC_RD_RCD
+          - description: EMC_WR_RCD
+          - description: EMC_RRD
+          - description: EMC_REXT
+          - description: EMC_WDV
+          - description: EMC_QUSE
+          - description: EMC_QRST
+          - description: EMC_QSAFE
+          - description: EMC_RDV
+          - description: EMC_REFRESH
+          - description: EMC_BURST_REFRESH_NUM
+          - description: EMC_PDEX2WR
+          - description: EMC_PDEX2RD
+          - description: EMC_PCHG2PDEN
+          - description: EMC_ACT2PDEN
+          - description: EMC_AR2PDEN
+          - description: EMC_RW2PDEN
+          - description: EMC_TXSR
+          - description: EMC_TCKE
+          - description: EMC_TFAW
+          - description: EMC_TRPAB
+          - description: EMC_TCLKSTABLE
+          - description: EMC_TCLKSTOP
+          - description: EMC_TREFBW
+          - description: EMC_QUSE_EXTRA
+          - description: EMC_FBIO_CFG6
+          - description: EMC_ODT_WRITE
+          - description: EMC_ODT_READ
+          - description: EMC_FBIO_CFG5
+          - description: EMC_CFG_DIG_DLL
+          - description: EMC_DLL_XFORM_DQS
+          - description: EMC_DLL_XFORM_QUSE
+          - description: EMC_ZCAL_REF_CNT
+          - description: EMC_ZCAL_WAIT_CNT
+          - description: EMC_AUTO_CAL_INTERVAL
+          - description: EMC_CFG_CLKTRIM_0
+          - description: EMC_CFG_CLKTRIM_1
+          - description: EMC_CFG_CLKTRIM_2
+
+    required:
+      - clock-frequency
+      - compatible
+      - reg
+      - nvidia,emc-registers
+
+    additionalProperties: false
+
+patternProperties:
+  "^emc-table@[0-9]+$":
+    $ref: "#/$defs/emc-table"
+
+  "^emc-tables@[a-z0-9-]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          An opaque enumerator to tell different tables apart.
+
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value of RAM_CODE this timing set is used for.
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      lpddr2:
+        $ref: "ddr/jedec,lpddr2.yaml#"
+        type: object
+
+    patternProperties:
+      "^emc-table@[0-9]+$":
+        $ref: "#/$defs/emc-table"
+
+    oneOf:
+      - required:
+          - nvidia,ram-code
+
+      - required:
+          - lpddr2
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra20-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clock_controller 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nvidia,use-ram-code;
+
+        emc-tables@0 {
+            nvidia,ram-code = <0>;
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            emc-table@333000 {
+                reg = <333000>;
+                compatible = "nvidia,tegra20-emc-table";
+                clock-frequency = <333000>;
+                nvidia,emc-registers = <0x00000018 0x00000033
+                        0x00000012 0x00000004 0x00000004 0x00000005
+                        0x00000003 0x0000000c 0x00000006 0x00000006
+                        0x00000003 0x00000001 0x00000004 0x00000005
+                        0x00000004 0x00000009 0x0000000d 0x00000bff
+                        0x00000000 0x00000003 0x00000003 0x00000006
+                        0x00000006 0x00000001 0x00000011 0x000000c8
+                        0x00000003 0x0000000e 0x00000007 0x00000008
+                        0x00000002 0x00000000 0x00000000 0x00000002
+                        0x00000000 0x00000000 0x00000083 0xf0440303
+                        0x007fe010 0x00001414 0x00000000 0x00000000
+                        0x00000000 0x00000000 0x00000000 0x00000000>;
+            };
+        };
+
+        emc-tables@1 {
+            reg = <1>;
+
+            lpddr2 {
+                compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+                revision-id1 = <1>;
+                density = <2048>;
+                io-width = <16>;
+            };
+        };
+    };