Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 205 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
new file mode 100644
index 000000000..a5ced46bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -0,0 +1,205 @@
+TPS65910 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps65910" or "ti,tps65911"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO, this should be 2.
+  The first cell is the GPIO number.
+  The second cell is used to specify additional options <unused>.
+- gpio-controller: mark the device as a GPIO controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+  The first cell is the IRQ number.
+  The second cell is the flags, encoded as the trigger masks from
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  The regulator is matched with the regulator-compatible.
+
+  The valid regulator-compatible values are:
+  tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
+            vaux2, vaux33, vmmc, vbb
+  tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+            ldo6, ldo7, ldo8
+
+- xxx-supply: Input voltage supply regulator.
+  These entries are required if regulators are enabled for a device. Missing these
+  properties can cause the regulator registration to fail.
+  If some of input supply is powered through battery or always-on supply then
+  also it is require to have these parameters with proper node handle of always
+  on power supply.
+  tps65910:
+	vcc1-supply: VDD1 input.
+	vcc2-supply: VDD2 input.
+	vcc3-supply: VAUX33 and VMMC input.
+	vcc4-supply: VAUX1 and VAUX2 input.
+	vcc5-supply: VPLL and VDAC input.
+	vcc6-supply: VDIG1 and VDIG2 input.
+	vcc7-supply: VRTC and VBB input.
+	vccio-supply: VIO input.
+  tps65911:
+	vcc1-supply: VDD1 input.
+	vcc2-supply: VDD2 input.
+	vcc3-supply: LDO6, LDO7 and LDO8 input.
+	vcc4-supply: LDO5 input.
+	vcc5-supply: LDO3 and LDO4 input.
+	vcc6-supply: LDO1 and LDO2 input.
+	vcc7-supply: VRTC input.
+	vccio-supply: VIO input.
+
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+  in TPS6591X datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+  There should be 9 entries here, one for each gpio.
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+- ti,sleep-enable: Enable SLEEP state.
+- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state.
+- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state.
+- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state.
+
+Regulator Optional properties:
+- ti,regulator-ext-sleep-control: enable external sleep
+  control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
+  If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+	pmu: tps65910@d2 {
+		compatible = "ti,tps65910";
+		reg = <0xd2>;
+		interrupt-parent = <&intc>;
+		interrupts = < 0 118 0x04 >;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		ti,vmbch-threshold = 0;
+		ti,vmbch2-threshold = 0;
+		ti,en-ck32k-xtal;
+		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+		vcc1-supply = <&reg_parent>;
+		vcc2-supply = <&some_reg>;
+		vcc3-supply = <...>;
+		vcc4-supply = <...>;
+		vcc5-supply = <...>;
+		vcc6-supply = <...>;
+		vcc7-supply = <...>;
+		vccio-supply = <...>;
+
+		regulators {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd1_reg: regulator@0 {
+				regulator-compatible = "vdd1";
+				reg = <0>;
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			vdd2_reg: regulator@1 {
+				regulator-compatible = "vdd2";
+				reg = <1>;
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <4>;
+			};
+			vddctrl_reg: regulator@2 {
+				regulator-compatible = "vddctrl";
+				reg = <2>;
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			vio_reg: regulator@3 {
+				regulator-compatible = "vio";
+				reg = <3>;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+			ldo1_reg: regulator@4 {
+				regulator-compatible = "ldo1";
+				reg = <4>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo2_reg: regulator@5 {
+				regulator-compatible = "ldo2";
+				reg = <5>;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo3_reg: regulator@6 {
+				regulator-compatible = "ldo3";
+				reg = <6>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo4_reg: regulator@7 {
+				regulator-compatible = "ldo4";
+				reg = <7>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo5_reg: regulator@8 {
+				regulator-compatible = "ldo5";
+				reg = <8>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo6_reg: regulator@9 {
+				regulator-compatible = "ldo6";
+				reg = <9>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo7_reg: regulator@10 {
+				regulator-compatible = "ldo7";
+				reg = <10>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+			ldo8_reg: regulator@11 {
+				regulator-compatible = "ldo8";
+				reg = <11>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+		};
+	};