Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 79 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
new file mode 100644
index 000000000..ee8a4791a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -0,0 +1,79 @@
+Freescale Layerscape PCIe controller
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  RC mode:
+        "fsl,ls1021a-pcie"
+        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
+        "fsl,ls2088a-pcie"
+        "fsl,ls1088a-pcie"
+        "fsl,ls1046a-pcie"
+        "fsl,ls1043a-pcie"
+        "fsl,ls1012a-pcie"
+        "fsl,ls1028a-pcie"
+  EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
+- fsl,pcie-scfg: Must include two entries.
+  The first entry must be a link to the SCFG device node
+  The second entry is the physical PCIe controller index starting from '0'.
+  This is used to get SCFG PEXN registers
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
+Example:
+
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };