Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
new file mode 100644
index 000000000..76a3dd35f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -0,0 +1,46 @@
+Lantiq Synchronous Serial Controller (SSC) SPI master driver
+
+Required properties:
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi",
+  "intel,lgm-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts:
+  For compatible "intel,lgm-ssc" - the common interrupt number for
+  all of tx rx & err interrupts.
+       or
+  For rest of the compatibles, should contain the "spi_rx", "spi_tx" and
+  "spi_err" interrupt.
+
+
+Optional properties:
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt, set to 8 if unset
+- base-cs: the number of the first chip select, set to 1 if unset.
+
+Example:
+
+
+spi: spi@e100800 {
+	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+	reg = <0xE100800 0x100>;
+	interrupt-parent = <&icu0>;
+	interrupts = <22 23 24>;
+	interrupt-names = "spi_rx", "spi_tx", "spi_err";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	num-cs = <6>;
+	base-cs = <1>;
+};
+
+ssc0: spi@e0800000 {
+	compatible = "intel,lgm-spi";
+	reg = <0xe0800000 0x400>;
+	interrupt-parent = <&ioapic1>;
+	interrupts = <35 1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&cgu0 LGM_CLK_NGI>, <&cgu0 LGM_GCLK_SSC0>;
+	clock-names = "freq", "gate";
+};