Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 226 insertions, 0 deletions

diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst
new file mode 100644
index 000000000..8864b52d1
--- /dev/null
+++ b/Documentation/devicetree/of_unittest.rst
@@ -0,0 +1,226 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Open Firmware Devicetree Unittest
+=================================
+
+Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
+
+1. Introduction
+===============
+
+This document explains how the test data required for executing OF unittest
+is attached to the live tree dynamically, independent of the machine's
+architecture.
+
+It is recommended to read the following documents before moving ahead.
+
+(1) Documentation/devicetree/usage-model.rst
+(2) http://www.devicetree.org/Device_Tree_Usage
+
+OF Selftest has been designed to test the interface (include/linux/of.h)
+provided to device driver developers to fetch the device information..etc.
+from the unflattened device tree data structure. This interface is used by
+most of the device drivers in various use cases.
+
+
+2. Verbose Output (EXPECT)
+==========================
+
+If unittest detects a problem it will print a warning or error message to
+the console.  Unittest also triggers warning and error messages from other
+kernel code as a result of intentionally bad unittest data.  This has led
+to confusion as to whether the triggered messages are an expected result
+of a test or whether there is a real problem that is independent of unittest.
+
+'EXPECT \ : text' (begin) and 'EXPECT / : text' (end) messages have been
+added to unittest to report that a warning or error is expected.  The
+begin is printed before triggering the warning or error, and the end is
+printed after triggering the warning or error.
+
+The EXPECT messages result in very noisy console messages that are difficult
+to read.  The script scripts/dtc/of_unittest_expect was created to filter
+this verbosity and highlight mismatches between triggered warnings and
+errors vs expected warnings and errors.  More information is available
+from 'scripts/dtc/of_unittest_expect --help'.
+
+
+3. Test-data
+============
+
+The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains
+the test data required for executing the unit tests automated in
+drivers/of/unittest.c. Currently, following Device Tree Source Include files
+(.dtsi) are included in testcases.dts::
+
+    drivers/of/unittest-data/tests-interrupts.dtsi
+    drivers/of/unittest-data/tests-platform.dtsi
+    drivers/of/unittest-data/tests-phandle.dtsi
+    drivers/of/unittest-data/tests-match.dtsi
+
+When the kernel is build with OF_SELFTEST enabled, then the following make
+rule::
+
+    $(obj)/%.dtb: $(src)/%.dts FORCE
+	    $(call if_changed_dep, dtc)
+
+is used to compile the DT source file (testcases.dts) into a binary blob
+(testcases.dtb), also referred as flattened DT.
+
+After that, using the following rule the binary blob above is wrapped as an
+assembly file (testcases.dtb.S)::
+
+    $(obj)/%.dtb.S: $(obj)/%.dtb
+	    $(call cmd, dt_S_dtb)
+
+The assembly file is compiled into an object file (testcases.dtb.o), and is
+linked into the kernel image.
+
+
+3.1. Adding the test data
+-------------------------
+
+Un-flattened device tree structure:
+
+Un-flattened device tree consists of connected device_node(s) in form of a tree
+structure described below::
+
+    // following struct members are used to construct the tree
+    struct device_node {
+	...
+	struct  device_node *parent;
+	struct  device_node *child;
+	struct  device_node *sibling;
+	...
+    };
+
+Figure 1, describes a generic structure of machine's un-flattened device tree
+considering only child and sibling pointers. There exists another pointer,
+``*parent``, that is used to traverse the tree in the reverse direction. So, at
+a particular level the child node and all the sibling nodes will have a parent
+pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's
+parent points to root node)::
+
+    root ('/')
+    |
+    child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |         |           |           |
+    |         |           |          null
+    |         |           |
+    |         |        child31 -> sibling32 -> null
+    |         |           |          |
+    |         |          null       null
+    |         |
+    |      child21 -> sibling22 -> sibling23 -> null
+    |         |          |            |
+    |        null       null         null
+    |
+    child11 -> sibling12 -> sibling13 -> sibling14 -> null
+    |           |           |            |
+    |           |           |           null
+    |           |           |
+    null        null       child131 -> null
+			    |
+			    null
+
+Figure 1: Generic structure of un-flattened device tree
+
+
+Before executing OF unittest, it is required to attach the test data to
+machine's device tree (if present). So, when selftest_data_add() is called,
+at first it reads the flattened device tree data linked into the kernel image
+via the following kernel symbols::
+
+    __dtb_testcases_begin - address marking the start of test data blob
+    __dtb_testcases_end   - address marking the end of test data blob
+
+Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened
+blob. And finally, if the machine's device tree (i.e live tree) is present,
+then it attaches the unflattened test data tree to the live tree, else it
+attaches itself as a live device tree.
+
+attach_node_and_children() uses of_attach_node() to attach the nodes into the
+live tree as explained below. To explain the same, the test data tree described
+in Figure 2 is attached to the live tree described in Figure 1::
+
+    root ('/')
+	|
+    testcase-data
+	|
+    test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
+	|               |                |                |
+    test-child01      null             null             null
+
+
+Figure 2: Example test data tree to be attached to live tree.
+
+According to the scenario above, the live tree is already present so it isn't
+required to attach the root('/') node. All other nodes are attached by calling
+of_attach_node() on each node.
+
+In the function of_attach_node(), the new node is attached as the child of the
+given parent in live tree. But, if parent already has a child then the new node
+replaces the current child and turns it into its sibling. So, when the testcase
+data node is attached to the live tree above (Figure 1), the final structure is
+as shown in Figure 3::
+
+    root ('/')
+    |
+    testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |               |          |           |           |
+    (...)             |          |           |          null
+		    |          |         child31 -> sibling32 -> null
+		    |          |           |           |
+		    |          |          null        null
+		    |          |
+		    |        child21 -> sibling22 -> sibling23 -> null
+		    |          |           |            |
+		    |         null        null         null
+		    |
+		    child11 -> sibling12 -> sibling13 -> sibling14 -> null
+		    |          |            |            |
+		    null       null          |           null
+					    |
+					    child131 -> null
+					    |
+					    null
+    -----------------------------------------------------------------------
+
+    root ('/')
+    |
+    testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |               |          |           |           |
+    |             (...)      (...)       (...)        null
+    |
+    test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
+    |                |                   |                |
+    null             null                null         test-child01
+
+
+Figure 3: Live device tree structure after attaching the testcase-data.
+
+
+Astute readers would have noticed that test-child0 node becomes the last
+sibling compared to the earlier structure (Figure 2). After attaching first
+test-child0 the test-sibling1 is attached that pushes the child node
+(i.e. test-child0) to become a sibling and makes itself a child node,
+as mentioned above.
+
+If a duplicate node is found (i.e. if a node with same full_name property is
+already present in the live tree), then the node isn't attached rather its
+properties are updated to the live tree's node by calling the function
+update_node_properties().
+
+
+3.2. Removing the test data
+---------------------------
+
+Once the test case execution is complete, selftest_data_remove is called in
+order to remove the device nodes attached initially (first the leaf nodes are
+detached and then moving up the parent nodes are removed, and eventually the
+whole tree). selftest_data_remove() calls detach_node_and_children() that uses
+of_detach_node() to detach the nodes from the live device tree.
+
+To detach a node, of_detach_node() either updates the child pointer of given
+node's parent to its sibling or attaches the previous sibling to the given
+node's sibling, as appropriate. That is it :)