Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 48 insertions, 0 deletions

diff --git a/Documentation/driver-api/hte/tegra194-hte.rst b/Documentation/driver-api/hte/tegra194-hte.rst
new file mode 100644
index 000000000..f2d617265
--- /dev/null
+++ b/Documentation/driver-api/hte/tegra194-hte.rst
@@ -0,0 +1,48 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+HTE Kernel provider driver
+==========================
+
+Description
+-----------
+The Nvidia tegra194 HTE provider driver implements two GTE
+(Generic Timestamping Engine) instances: 1) GPIO GTE and 2) LIC
+(Legacy Interrupt Controller) IRQ GTE. Both GTE instances get the
+timestamp from the system counter TSC which has 31.25MHz clock rate, and the
+driver converts clock tick rate to nanoseconds before storing it as timestamp
+value.
+
+GPIO GTE
+--------
+
+This GTE instance timestamps GPIO in real time. For that to happen GPIO
+needs to be configured as input. The always on (AON) GPIO controller instance
+supports timestamping GPIOs in real time and it has 39 GPIO lines. The GPIO GTE
+and AON GPIO controller are tightly coupled as it requires very specific bits
+to be set in GPIO config register before GPIO GTE can be used, for that GPIOLIB
+adds two optional APIs as below. The GPIO GTE code supports both kernel
+and userspace consumers. The kernel space consumers can directly talk to HTE
+subsystem while userspace consumers timestamp requests go through GPIOLIB CDEV
+framework to HTE subsystem.
+
+See gpiod_enable_hw_timestamp_ns() and gpiod_disable_hw_timestamp_ns().
+
+For userspace consumers, GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE flag must be
+specified during IOCTL calls. Refer to ``tools/gpio/gpio-event-mon.c``, which
+returns the timestamp in nanoseconds.
+
+LIC (Legacy Interrupt Controller) IRQ GTE
+-----------------------------------------
+
+This GTE instance timestamps LIC IRQ lines in real time. There are 352 IRQ
+lines which this instance can add timestamps to in real time. The hte
+devicetree binding described at ``Documentation/devicetree/bindings/timestamp``
+provides an example of how a consumer can request an IRQ line. Since it is a
+one-to-one mapping with IRQ GTE provider, consumers can simply specify the IRQ
+number that they are interested in. There is no userspace consumer support for
+this GTE instance in the HTE framework.
+
+The provider source code of both IRQ and GPIO GTE instances is located at
+``drivers/hte/hte-tegra194.c``. The test driver
+``drivers/hte/hte-tegra194-test.c`` demonstrates HTE API usage for both IRQ
+and GPIO GTE.