Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 129 insertions, 0 deletions

diff --git a/Documentation/sound/hd-audio/realtek-pc-beep.rst b/Documentation/sound/hd-audio/realtek-pc-beep.rst
new file mode 100644
index 000000000..be47c6f76
--- /dev/null
+++ b/Documentation/sound/hd-audio/realtek-pc-beep.rst
@@ -0,0 +1,129 @@
+===============================
+Realtek PC Beep Hidden Register
+===============================
+
+This file documents the "PC Beep Hidden Register", which is present in certain
+Realtek HDA codecs and controls a muxer and pair of passthrough mixers that can
+route audio between pins but aren't themselves exposed as HDA widgets. As far
+as I can tell, these hidden routes are designed to allow flexible PC Beep output
+for codecs that don't have mixer widgets in their output paths. Why it's easier
+to hide a mixer behind an undocumented vendor register than to just expose it
+as a widget, I have no idea.
+
+Register Description
+====================
+
+The register is accessed via processing coefficient 0x36 on NID 20h. Bits not
+identified below have no discernible effect on my machine, a Dell XPS 13 9350::
+
+  MSB                           LSB
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  | |h|S|L|         | B |R|       | Known bits
+  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+  |0|0|1|1|  0x7  |0|0x0|1|  0x7  | Reset value
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+1Ah input select (B): 2 bits
+  When zero, expose the PC Beep line (from the internal beep generator, when
+  enabled with the Set Beep Generation verb on NID 01h, or else from the
+  external PCBEEP pin) on the 1Ah pin node. When nonzero, expose the headphone
+  jack (or possibly Line In on some machines) input instead. If PC Beep is
+  selected, the 1Ah boost control has no effect.
+
+Amplify 1Ah loopback, left (L): 1 bit
+  Amplify the left channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Amplify 1Ah loopback, right (R): 1 bit
+  Amplify the right channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Loopback 1Ah to 21h [active low] (h): 1 bit
+  When zero, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 21h (headphone jack on my machine). Mixed signal respects the mute
+  setting on 21h.
+
+Loopback 1Ah to 14h (S): 1 bit
+  When one, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 14h (internal speaker on my machine). Mixed signal **ignores** the mute
+  setting on 14h and is present whenever 14h is configured as an output.
+
+Path diagrams
+=============
+
+1Ah input selection (DIV is the PC Beep divider set on NID 01h)::
+
+  <Beep generator>   <PCBEEP pin>    <Headphone jack>
+          |                |                |
+          +--DIV--+--!DIV--+       {1Ah boost control}
+                  |                         |
+                  +--(b == 0)--+--(b != 0)--+
+                               |
+               >1Ah (Beep/Headphone Mic/Line In)<
+
+Loopback of 1Ah to 21h/14h::
+
+               <1Ah (Beep/Headphone Mic/Line In)>
+                               |
+                        {amplify if L/R}
+                               |
+                  +-----!h-----+-----S-----+
+                  |                        |
+          {21h mute control}               |
+                  |                        |
+          >21h (Headphone)<     >14h (Internal Speaker)<
+
+Background
+==========
+
+All Realtek HDA codecs have a vendor-defined widget with node ID 20h which
+provides access to a bank of registers that control various codec functions.
+Registers are read and written via the standard HDA processing coefficient
+verbs (Set/Get Coefficient Index, Set/Get Processing Coefficient). The node is
+named "Realtek Vendor Registers" in public datasheets' verb listings and,
+apart from that, is entirely undocumented.
+
+This particular register, exposed at coefficient 0x36 and named in commits from
+Realtek, is of note: unlike most registers, which seem to control detailed
+amplifier parameters not in scope of the HDA specification, it controls audio
+routing which could just as easily have been defined using standard HDA mixer
+and selector widgets.
+
+Specifically, it selects between two sources for the input pin widget with Node
+ID (NID) 1Ah: the widget's signal can come either from an audio jack (on my
+laptop, a Dell XPS 13 9350, it's the headphone jack, but comments in Realtek
+commits indicate that it might be a Line In on some machines) or from the PC
+Beep line (which is itself multiplexed between the codec's internal beep
+generator and external PCBEEP pin, depending on if the beep generator is
+enabled via verbs on NID 01h). Additionally, it can mix (with optional
+amplification) that signal onto the 21h and/or 14h output pins.
+
+The register's reset value is 0x3717, corresponding to PC Beep on 1Ah that is
+then amplified and mixed into both the headphones and the speakers. Not only
+does this violate the HDA specification, which says that "[a vendor defined
+beep input pin] connection may be maintained *only* while the Link reset
+(**RST#**) is asserted", it means that we cannot ignore the register if we care
+about the input that 1Ah would otherwise expose or if the PCBEEP trace is
+poorly shielded and picks up chassis noise (both of which are the case on my
+machine).
+
+Unfortunately, there are lots of ways to get this register configuration wrong.
+Linux, it seems, has gone through most of them. For one, the register resets
+after S3 suspend: judging by existing code, this isn't the case for all vendor
+registers, and it's led to some fixes that improve behavior on cold boot but
+don't last after suspend. Other fixes have successfully switched the 1Ah input
+away from PC Beep but have failed to disable both loopback paths. On my
+machine, this means that the headphone input is amplified and looped back to
+the headphone output, which uses the exact same pins! As you might expect, this
+causes terrible headphone noise, the character of which is controlled by the
+1Ah boost control. (If you've seen instructions online to fix XPS 13 headphone
+noise by changing "Headphone Mic Boost" in ALSA, now you know why.)
+
+The information here has been obtained through black-box reverse engineering of
+the ALC256 codec's behavior and is not guaranteed to be correct. It likely
+also applies for the ALC255, ALC257, ALC235, and ALC236, since those codecs
+seem to be close relatives of the ALC256. (They all share one initialization
+function.) Additionally, other codecs like the ALC225 and ALC285 also have this
+register, judging by existing fixups in ``patch_realtek.c``, but specific
+data (e.g. node IDs, bit positions, pin mappings) for those codecs may differ
+from what I've described here.