Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 332 insertions, 0 deletions

diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
new file mode 100644
index 000000000..f0f65eb07
--- /dev/null
+++ b/arch/arm/mm/cache-v6.S
@@ -0,0 +1,332 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/mm/cache-v6.S
+ *
+ *  Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ *  This is the "shell" of the ARMv6 processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/unwind.h>
+
+#include "proc-macros.S"
+
+#define HARVARD_CACHE
+#define CACHE_LINE_SIZE		32
+#define D_CACHE_LINE_SIZE	32
+#define BTB_FLUSH_SIZE		8
+
+/*
+ *	v6_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
+ *
+ *	ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
+ *	This erratum is present in 1136, 1156 and 1176. It does not affect the
+ *	MPCore.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ *	r1 - corrupted
+ */
+ENTRY(v6_flush_icache_all)
+	mov	r0, #0
+#ifdef CONFIG_ARM_ERRATA_411920
+	mrs	r1, cpsr
+	cpsid	ifa				@ disable interrupts
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	msr	cpsr_cx, r1			@ restore interrupts
+	.rept	11				@ ARM Ltd recommends at least
+	nop					@ 11 NOPs
+	.endr
+#else
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
+#endif
+	ret	lr
+ENDPROC(v6_flush_icache_all)
+
+/*
+ *	v6_flush_cache_all()
+ *
+ *	Flush the entire cache.
+ *
+ *	It is assumed that:
+ */
+ENTRY(v6_flush_kern_cache_all)
+	mov	r0, #0
+#ifdef HARVARD_CACHE
+	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
+	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#else
+	b	v6_flush_icache_all
+#endif
+#else
+	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
+#endif
+	ret	lr
+
+/*
+ *	v6_flush_cache_all()
+ *
+ *	Flush all TLB entries in a particular address space
+ *
+ *	- mm    - mm_struct describing address space
+ */
+ENTRY(v6_flush_user_cache_all)
+	/*FALLTHROUGH*/
+
+/*
+ *	v6_flush_cache_range(start, end, flags)
+ *
+ *	Flush a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- flags	- vm_area_struct flags describing address space
+ *
+ *	It is assumed that:
+ *	- we have a VIPT cache.
+ */
+ENTRY(v6_flush_user_cache_range)
+	ret	lr
+
+/*
+ *	v6_coherent_kern_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v6_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	v6_coherent_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v6_coherent_user_range)
+ UNWIND(.fnstart		)
+#ifdef HARVARD_CACHE
+	bic	r0, r0, #CACHE_LINE_SIZE - 1
+1:
+ USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
+	add	r0, r0, #CACHE_LINE_SIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mov	r0, #0
+#ifdef HARVARD_CACHE
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
+	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#else
+	b	v6_flush_icache_all
+#endif
+#else
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
+#endif
+	ret	lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, fail with -EFAULT.
+ */
+9001:
+	mov	r0, #-EFAULT
+	ret	lr
+ UNWIND(.fnend		)
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
+/*
+ *	v6_flush_kern_dcache_area(void *addr, size_t size)
+ *
+ *	Ensure that the data held in the page kaddr is written back
+ *	to the page in question.
+ *
+ *	- addr	- kernel address
+ *	- size	- region size
+ */
+ENTRY(v6_flush_kern_dcache_area)
+	add	r1, r0, r1
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
+#ifdef HARVARD_CACHE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
+#else
+	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate unified line
+#endif	
+	add	r0, r0, #D_CACHE_LINE_SIZE
+	cmp	r0, r1
+	blo	1b
+#ifdef HARVARD_CACHE
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4
+#endif
+	ret	lr
+
+
+/*
+ *	v6_dma_inv_range(start,end)
+ *
+ *	Invalidate the data cache within the specified region; we will
+ *	be performing a DMA operation in this region and we want to
+ *	purge old data in the cache.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]			@ read for ownership
+	strb	r2, [r0]			@ write for ownership
+#endif
+	tst	r0, #D_CACHE_LINE_SIZE - 1
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+#ifdef HARVARD_CACHE
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D line
+#else
+	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
+#endif
+	tst	r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrbne	r2, [r1, #-1]			@ read for ownership
+	strbne	r2, [r1, #-1]			@ write for ownership
+#endif
+	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
+#ifdef HARVARD_CACHE
+	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
+#else
+	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
+#endif
+1:
+#ifdef HARVARD_CACHE
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
+#else
+	mcr	p15, 0, r0, c7, c7, 1		@ invalidate unified line
+#endif
+	add	r0, r0, #D_CACHE_LINE_SIZE
+	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlo	r2, [r0]			@ read for ownership
+	strlo	r2, [r0]			@ write for ownership
+#endif
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	ret	lr
+
+/*
+ *	v6_dma_clean_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+v6_dma_clean_range:
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+#endif
+#ifdef HARVARD_CACHE
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
+#else
+	mcr	p15, 0, r0, c7, c11, 1		@ clean unified line
+#endif
+	add	r0, r0, #D_CACHE_LINE_SIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	ret	lr
+
+/*
+ *	v6_dma_flush_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(v6_dma_flush_range)
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]		@ read for ownership
+	strb	r2, [r0]		@ write for ownership
+#endif
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
+#ifdef HARVARD_CACHE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
+#else
+	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate line
+#endif
+	add	r0, r0, #D_CACHE_LINE_SIZE
+	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrblo	r2, [r0]			@ read for ownership
+	strblo	r2, [r0]			@ write for ownership
+#endif
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	ret	lr
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v6_dma_map_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_FROM_DEVICE
+	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
+	teq	r2, #DMA_TO_DEVICE
+	beq	v6_dma_clean_range
+	b	v6_dma_flush_range
+#endif
+ENDPROC(v6_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
+	ret	lr
+ENDPROC(v6_dma_unmap_area)
+
+	.globl	v6_flush_kern_cache_louis
+	.equ	v6_flush_kern_cache_louis, v6_flush_kern_cache_all
+
+	__INITDATA
+
+	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+	define_cache_functions v6