summaryrefslogtreecommitdiffstats
path: root/arch/mips/include/asm/sgi
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /arch/mips/include/asm/sgi
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/mips/include/asm/sgi')
-rw-r--r--arch/mips/include/asm/sgi/gio.h86
-rw-r--r--arch/mips/include/asm/sgi/heart.h323
-rw-r--r--arch/mips/include/asm/sgi/hpc3.h317
-rw-r--r--arch/mips/include/asm/sgi/ioc.h200
-rw-r--r--arch/mips/include/asm/sgi/ip22.h80
-rw-r--r--arch/mips/include/asm/sgi/mc.h231
-rw-r--r--arch/mips/include/asm/sgi/pi1.h72
-rw-r--r--arch/mips/include/asm/sgi/seeq.h21
-rw-r--r--arch/mips/include/asm/sgi/wd.h20
9 files changed, 1350 insertions, 0 deletions
diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h
new file mode 100644
index 000000000..24be2b425
--- /dev/null
+++ b/arch/mips/include/asm/sgi/gio.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * gio.h: Definitions for SGI GIO bus
+ *
+ * Copyright (C) 2002 Ladislav Michl
+ */
+
+#ifndef _SGI_GIO_H
+#define _SGI_GIO_H
+
+/*
+ * GIO bus addresses
+ *
+ * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
+ * three physical connectors, but only two slots, GFX and EXP0.
+ *
+ * There is 10MB of GIO address space for GIO64 slot devices
+ * slot# slot type address range size
+ * ----- --------- ----------------------- -----
+ * 0 GFX 0x1f000000 - 0x1f3fffff 4MB
+ * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB
+ * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB
+ *
+ * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
+ * into the HPC address space.
+ * - MISC 0x1fb00000 - 0x1fbfffff 1MB
+ *
+ * Following space is reserved and unused
+ * - RESERVED 0x18000000 - 0x1effffff 112MB
+ *
+ * GIO bus IDs
+ *
+ * Each GIO bus device identifies itself to the system by answering a
+ * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
+ * than 128 are 8 bits long, with the most significant 24 bits read from
+ * the slot undefined.
+ *
+ * 32-bit IDs are divided into
+ * bits 0:6 the product ID; ranges from 0x00 to 0x7F.
+ * bit 7 0=GIO Product ID is 8 bits wide
+ * 1=GIO Product ID is 32 bits wide.
+ * bits 8:15 manufacturer version for the product.
+ * bit 16 0=GIO32 and GIO32-bis, 1=GIO64.
+ * bit 17 0=no ROM present
+ * 1=ROM present on this board AND next three words
+ * space define the ROM.
+ * bits 18:31 up to manufacturer.
+ *
+ * IDs above 0x50/0xd0 are of 3rd party boards.
+ *
+ * 8-bit IDs
+ * 0x01 XPI low cost FDDI
+ * 0x02 GTR TokenRing
+ * 0x04 Synchronous ISDN
+ * 0x05 ATM board [*]
+ * 0x06 Canon Interface
+ * 0x07 16 bit SCSI Card [*]
+ * 0x08 JPEG (Double Wide)
+ * 0x09 JPEG (Single Wide)
+ * 0x0a XPI mez. FDDI device 0
+ * 0x0b XPI mez. FDDI device 1
+ * 0x0c SMPTE 259M Video [*]
+ * 0x0d Babblefish Compression [*]
+ * 0x0e E-Plex 8-port Ethernet
+ * 0x30 Lyon Lamb IVAS
+ * 0xb8 GIO 100BaseTX Fast Ethernet (gfe)
+ *
+ * [*] Device provide 32-bit ID.
+ *
+ */
+
+#define GIO_ID(x) (x & 0x7f)
+#define GIO_32BIT_ID 0x80
+#define GIO_REV(x) ((x >> 8) & 0xff)
+#define GIO_64BIT_IFACE 0x10000
+#define GIO_ROM_PRESENT 0x20000
+#define GIO_VENDOR_CODE(x) ((x >> 18) & 0x3fff)
+
+#define GIO_SLOT_GFX_BASE 0x1f000000
+#define GIO_SLOT_EXP0_BASE 0x1f400000
+#define GIO_SLOT_EXP1_BASE 0x1f600000
+
+#endif /* _SGI_GIO_H */
diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h
new file mode 100644
index 000000000..0d0375195
--- /dev/null
+++ b/arch/mips/include/asm/sgi/heart.h
@@ -0,0 +1,323 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * HEART chip definitions
+ *
+ * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
+ * 2009 Johannes Dickgreber <tanzy@gmx.de>
+ * 2007-2015 Joshua Kinard <kumba@gentoo.org>
+ */
+#ifndef __ASM_SGI_HEART_H
+#define __ASM_SGI_HEART_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+/*
+ * There are 8 DIMM slots on an IP30 system
+ * board, which are grouped into four banks
+ */
+#define HEART_MEMORY_BANKS 4
+
+/* HEART can support up to four CPUs */
+#define HEART_MAX_CPUS 4
+
+#define HEART_XKPHYS_BASE ((void *)(IO_BASE | 0x000000000ff00000ULL))
+
+/**
+ * struct ip30_heart_regs - struct that maps IP30 HEART registers.
+ * @mode: HEART_MODE - Purpose Unknown, machine reset called from here.
+ * @sdram_mode: HEART_SDRAM_MODE - purpose unknown.
+ * @mem_refresh: HEART_MEM_REF - purpose unknown.
+ * @mem_req_arb: HEART_MEM_REQ_ARB - purpose unknown.
+ * @mem_cfg.q: union for 64bit access to HEART_MEMCFG - 4x 64bit registers.
+ * @mem_cfg.l: union for 32bit access to HEART_MEMCFG - 8x 32bit registers.
+ * @fc_mode: HEART_FC_MODE - Purpose Unknown, possibly for GFX flow control.
+ * @fc_timer_limit: HEART_FC_TIMER_LIMIT - purpose unknown.
+ * @fc_addr: HEART_FC0_ADDR, HEART_FC1_ADDR - purpose unknown.
+ * @fc_credit_cnt: HEART_FC0_CR_CNT, HEART_FC1_CR_CNT - purpose unknown.
+ * @fc_timer: HEART_FC0_TIMER, HEART_FC1_TIMER - purpose unknown.
+ * @status: HEART_STATUS - HEART status information.
+ * @bus_err_addr: HEART_BERR_ADDR - likely contains addr of recent SIGBUS.
+ * @bus_err_misc: HEART_BERR_MISC - purpose unknown.
+ * @mem_err_addr: HEART_MEMERR_ADDR - likely contains addr of recent mem err.
+ * @mem_err_data: HEART_MEMERR_DATA - purpose unknown.
+ * @piur_acc_err: HEART_PIUR_ACC_ERR - likely for access err to HEART regs.
+ * @mlan_clock_div: HEART_MLAN_CLK_DIV - MicroLAN clock divider.
+ * @mlan_ctrl: HEART_MLAN_CTL - MicroLAN control.
+ * @__pad0: 0x0f40 bytes of padding -> next HEART register 0x01000.
+ * @undefined: Undefined/diag register, write to it triggers PIUR_ACC_ERR.
+ * @__pad1: 0xeff8 bytes of padding -> next HEART register 0x10000.
+ * @imr: HEART_IMR0 to HEART_IMR3 - per-cpu interrupt mask register.
+ * @set_isr: HEART_SET_ISR - set interrupt status register.
+ * @clear_isr: HEART_CLR_ISR - clear interrupt status register.
+ * @isr: HEART_ISR - interrupt status register (read-only).
+ * @imsr: HEART_IMSR - purpose unknown.
+ * @cause: HEART_CAUSE - HEART cause information.
+ * @__pad2: 0xffb8 bytes of padding -> next HEART register 0x20000.
+ * @count: HEART_COUNT - 52-bit counter.
+ * @__pad3: 0xfff8 bytes of padding -> next HEART register 0x30000.
+ * @compare: HEART_COMPARE - 24-bit compare.
+ * @__pad4: 0xfff8 bytes of padding -> next HEART register 0x40000.
+ * @trigger: HEART_TRIGGER - purpose unknown.
+ * @__pad5: 0xfff8 bytes of padding -> next HEART register 0x50000.
+ * @cpuid: HEART_PRID - contains CPU ID of CPU currently accessing HEART.
+ * @__pad6: 0xfff8 bytes of padding -> next HEART register 0x60000.
+ * @sync: HEART_SYNC - purpose unknown.
+ *
+ * HEART is the main system controller ASIC for IP30 system. It incorporates
+ * a memory controller, interrupt status/cause/set/clear management, basic
+ * timer with count/compare, and other functionality. For Linux, not all of
+ * HEART's functions are fully understood.
+ *
+ * Implementation note: All HEART registers are 64bits-wide, but the mem_cfg
+ * register only reports correct values if queried in 32bits. Hence the need
+ * for a union. Even though mem_cfg.l has 8 array slots, we only ever query
+ * up to 4 of those. IP30 has 8 DIMM slots arranged into 4 banks, w/ 2 DIMMs
+ * per bank. Each 32bit read accesses one of these banks. Perhaps HEART was
+ * designed to address up to 8 banks (16 DIMMs)? We may never know.
+ */
+struct ip30_heart_regs { /* 0x0ff00000 */
+ u64 mode; /* + 0x00000 */
+ /* Memory */
+ u64 sdram_mode; /* + 0x00008 */
+ u64 mem_refresh; /* + 0x00010 */
+ u64 mem_req_arb; /* + 0x00018 */
+ union {
+ u64 q[HEART_MEMORY_BANKS]; /* readq() */
+ u32 l[HEART_MEMORY_BANKS * 2]; /* readl() */
+ } mem_cfg; /* + 0x00020 */
+ /* Flow control (gfx?) */
+ u64 fc_mode; /* + 0x00040 */
+ u64 fc_timer_limit; /* + 0x00048 */
+ u64 fc_addr[2]; /* + 0x00050 */
+ u64 fc_credit_cnt[2]; /* + 0x00060 */
+ u64 fc_timer[2]; /* + 0x00070 */
+ /* Status */
+ u64 status; /* + 0x00080 */
+ /* Bus error */
+ u64 bus_err_addr; /* + 0x00088 */
+ u64 bus_err_misc; /* + 0x00090 */
+ /* Memory error */
+ u64 mem_err_addr; /* + 0x00098 */
+ u64 mem_err_data; /* + 0x000a0 */
+ /* Misc */
+ u64 piur_acc_err; /* + 0x000a8 */
+ u64 mlan_clock_div; /* + 0x000b0 */
+ u64 mlan_ctrl; /* + 0x000b8 */
+ u64 __pad0[0x01e8]; /* + 0x000c0 + 0x0f40 */
+ /* Undefined */
+ u64 undefined; /* + 0x01000 */
+ u64 __pad1[0x1dff]; /* + 0x01008 + 0xeff8 */
+ /* Interrupts */
+ u64 imr[HEART_MAX_CPUS]; /* + 0x10000 */
+ u64 set_isr; /* + 0x10020 */
+ u64 clear_isr; /* + 0x10028 */
+ u64 isr; /* + 0x10030 */
+ u64 imsr; /* + 0x10038 */
+ u64 cause; /* + 0x10040 */
+ u64 __pad2[0x1ff7]; /* + 0x10048 + 0xffb8 */
+ /* Timer */
+ u64 count; /* + 0x20000 */
+ u64 __pad3[0x1fff]; /* + 0x20008 + 0xfff8 */
+ u64 compare; /* + 0x30000 */
+ u64 __pad4[0x1fff]; /* + 0x30008 + 0xfff8 */
+ u64 trigger; /* + 0x40000 */
+ u64 __pad5[0x1fff]; /* + 0x40008 + 0xfff8 */
+ /* Misc */
+ u64 cpuid; /* + 0x50000 */
+ u64 __pad6[0x1fff]; /* + 0x50008 + 0xfff8 */
+ u64 sync; /* + 0x60000 */
+};
+
+
+/* For timer-related bits. */
+#define HEART_NS_PER_CYCLE 80
+#define HEART_CYCLES_PER_SEC (NSEC_PER_SEC / HEART_NS_PER_CYCLE)
+
+
+/*
+ * XXX: Everything below this comment will either go away or be cleaned
+ * up to fit in better with Linux. A lot of the bit definitions for
+ * HEART were derived from IRIX's sys/RACER/heart.h header file.
+ */
+
+/* HEART Masks */
+#define HEART_ATK_MASK 0x0007ffffffffffff /* HEART attack mask */
+#define HEART_ACK_ALL_MASK 0xffffffffffffffff /* Ack everything */
+#define HEART_CLR_ALL_MASK 0x0000000000000000 /* Clear all */
+#define HEART_BR_ERR_MASK 0x7ff8000000000000 /* BRIDGE error mask */
+#define HEART_CPU0_ERR_MASK 0x8ff8000000000000 /* CPU0 error mask */
+#define HEART_CPU1_ERR_MASK 0x97f8000000000000 /* CPU1 error mask */
+#define HEART_CPU2_ERR_MASK 0xa7f8000000000000 /* CPU2 error mask */
+#define HEART_CPU3_ERR_MASK 0xc7f8000000000000 /* CPU3 error mask */
+#define HEART_ERR_MASK 0x1ff /* HEART error mask */
+#define HEART_ERR_MASK_START 51 /* HEART error start */
+#define HEART_ERR_MASK_END 63 /* HEART error end */
+
+/* Bits in the HEART_MODE register. */
+#define HM_PROC_DISABLE_SHFT 60
+#define HM_PROC_DISABLE_MSK (0xfUL << HM_PROC_DISABLE_SHFT)
+#define HM_PROC_DISABLE(x) (0x1UL << (x) + HM_PROC_DISABLE_SHFT)
+#define HM_MAX_PSR (0x7UL << 57)
+#define HM_MAX_IOSR (0x7UL << 54)
+#define HM_MAX_PEND_IOSR (0x7UL << 51)
+#define HM_TRIG_SRC_SEL_MSK (0x7UL << 48)
+#define HM_TRIG_HEART_EXC (0x0UL << 48)
+#define HM_TRIG_REG_BIT (0x1UL << 48)
+#define HM_TRIG_SYSCLK (0x2UL << 48)
+#define HM_TRIG_MEMCLK_2X (0x3UL << 48)
+#define HM_TRIG_MEMCLK (0x4UL << 48)
+#define HM_TRIG_IOCLK (0x5UL << 48)
+#define HM_PIU_TEST_MODE (0xfUL << 40)
+#define HM_GP_FLAG_MSK (0xfUL << 36)
+#define HM_GP_FLAG(x) BIT((x) + 36)
+#define HM_MAX_PROC_HYST (0xfUL << 32)
+#define HM_LLP_WRST_AFTER_RST BIT(28)
+#define HM_LLP_LINK_RST BIT(27)
+#define HM_LLP_WARM_RST BIT(26)
+#define HM_COR_ECC_LCK BIT(25)
+#define HM_REDUCED_PWR BIT(24)
+#define HM_COLD_RST BIT(23)
+#define HM_SW_RST BIT(22)
+#define HM_MEM_FORCE_WR BIT(21)
+#define HM_DB_ERR_GEN BIT(20)
+#define HM_SB_ERR_GEN BIT(19)
+#define HM_CACHED_PIO_EN BIT(18)
+#define HM_CACHED_PROM_EN BIT(17)
+#define HM_PE_SYS_COR_ERE BIT(16)
+#define HM_GLOBAL_ECC_EN BIT(15)
+#define HM_IO_COH_EN BIT(14)
+#define HM_INT_EN BIT(13)
+#define HM_DATA_CHK_EN BIT(12)
+#define HM_REF_EN BIT(11)
+#define HM_BAD_SYSWR_ERE BIT(10)
+#define HM_BAD_SYSRD_ERE BIT(9)
+#define HM_SYSSTATE_ERE BIT(8)
+#define HM_SYSCMD_ERE BIT(7)
+#define HM_NCOR_SYS_ERE BIT(6)
+#define HM_COR_SYS_ERE BIT(5)
+#define HM_DATA_ELMNT_ERE BIT(4)
+#define HM_MEM_ADDR_PROC_ERE BIT(3)
+#define HM_MEM_ADDR_IO_ERE BIT(2)
+#define HM_NCOR_MEM_ERE BIT(1)
+#define HM_COR_MEM_ERE BIT(0)
+
+/* Bits in the HEART_MEM_REF register. */
+#define HEART_MEMREF_REFS(x) ((0xfUL & (x)) << 16)
+#define HEART_MEMREF_PERIOD(x) ((0xffffUL & (x)))
+#define HEART_MEMREF_REFS_VAL HEART_MEMREF_REFS(8)
+#define HEART_MEMREF_PERIOD_VAL HEART_MEMREF_PERIOD(0x4000)
+#define HEART_MEMREF_VAL (HEART_MEMREF_REFS_VAL | \
+ HEART_MEMREF_PERIOD_VAL)
+
+/* Bits in the HEART_MEM_REQ_ARB register. */
+#define HEART_MEMARB_IODIS (1 << 20)
+#define HEART_MEMARB_MAXPMWRQS (15 << 16)
+#define HEART_MEMARB_MAXPMRRQS (15 << 12)
+#define HEART_MEMARB_MAXPMRQS (15 << 8)
+#define HEART_MEMARB_MAXRRRQS (15 << 4)
+#define HEART_MEMARB_MAXGBRRQS (15)
+
+/* Bits in the HEART_MEMCFG<x> registers. */
+#define HEART_MEMCFG_VALID 0x80000000 /* Bank is valid */
+#define HEART_MEMCFG_DENSITY 0x01c00000 /* Mem density */
+#define HEART_MEMCFG_SIZE_MASK 0x003f0000 /* Mem size mask */
+#define HEART_MEMCFG_ADDR_MASK 0x000001ff /* Base addr mask */
+#define HEART_MEMCFG_SIZE_SHIFT 16 /* Mem size shift */
+#define HEART_MEMCFG_DENSITY_SHIFT 22 /* Density Shift */
+#define HEART_MEMCFG_UNIT_SHIFT 25 /* Unit Shift, 32MB */
+
+/* Bits in the HEART_STATUS register */
+#define HEART_STAT_HSTL_SDRV BIT(14)
+#define HEART_STAT_FC_CR_OUT(x) BIT((x) + 12)
+#define HEART_STAT_DIR_CNNCT BIT(11)
+#define HEART_STAT_TRITON BIT(10)
+#define HEART_STAT_R4K BIT(9)
+#define HEART_STAT_BIG_ENDIAN BIT(8)
+#define HEART_STAT_PROC_SHFT 4
+#define HEART_STAT_PROC_MSK (0xfUL << HEART_STAT_PROC_SHFT)
+#define HEART_STAT_PROC_ACTIVE(x) (0x1UL << ((x) + HEART_STAT_PROC_SHFT))
+#define HEART_STAT_WIDGET_ID 0xf
+
+/* Bits in the HEART_CAUSE register */
+#define HC_PE_SYS_COR_ERR_MSK (0xfUL << 60)
+#define HC_PE_SYS_COR_ERR(x) BIT((x) + 60)
+#define HC_PIOWDB_OFLOW BIT(44)
+#define HC_PIORWRB_OFLOW BIT(43)
+#define HC_PIUR_ACC_ERR BIT(42)
+#define HC_BAD_SYSWR_ERR BIT(41)
+#define HC_BAD_SYSRD_ERR BIT(40)
+#define HC_SYSSTATE_ERR_MSK (0xfUL << 36)
+#define HC_SYSSTATE_ERR(x) BIT((x) + 36)
+#define HC_SYSCMD_ERR_MSK (0xfUL << 32)
+#define HC_SYSCMD_ERR(x) BIT((x) + 32)
+#define HC_NCOR_SYSAD_ERR_MSK (0xfUL << 28)
+#define HC_NCOR_SYSAD_ERR(x) BIT((x) + 28)
+#define HC_COR_SYSAD_ERR_MSK (0xfUL << 24)
+#define HC_COR_SYSAD_ERR(x) BIT((x) + 24)
+#define HC_DATA_ELMNT_ERR_MSK (0xfUL << 20)
+#define HC_DATA_ELMNT_ERR(x) BIT((x) + 20)
+#define HC_WIDGET_ERR BIT(16)
+#define HC_MEM_ADDR_ERR_PROC_MSK (0xfUL << 4)
+#define HC_MEM_ADDR_ERR_PROC(x) BIT((x) + 4)
+#define HC_MEM_ADDR_ERR_IO BIT(2)
+#define HC_NCOR_MEM_ERR BIT(1)
+#define HC_COR_MEM_ERR BIT(0)
+
+/*
+ * HEART has 64 interrupt vectors available to it, subdivided into five
+ * priority levels. They are numbered 0 to 63.
+ */
+#define HEART_NUM_IRQS 64
+
+/*
+ * These are the five interrupt priority levels and their corresponding
+ * CPU IPx interrupt pins.
+ *
+ * Level 4 - Error Interrupts.
+ * Level 3 - HEART timer interrupt.
+ * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
+ * Level 1 - General device interrupts.
+ * Level 0 - General device GFX flow control interrupts.
+ */
+#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */
+#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */
+#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */
+#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */
+#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */
+
+/* HEART L0 Interrupts (Low Priority) */
+#define HEART_L0_INT_GENERIC 0
+#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1
+#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2
+
+/* HEART L2 Interrupts (High Priority) */
+#define HEART_L2_INT_RESCHED_CPU_0 46
+#define HEART_L2_INT_RESCHED_CPU_1 47
+#define HEART_L2_INT_CALL_CPU_0 48
+#define HEART_L2_INT_CALL_CPU_1 49
+
+/* HEART L3 Interrupts (Compare/Counter Timer) */
+#define HEART_L3_INT_TIMER 50
+
+/* HEART L4 Interrupts (Errors) */
+#define HEART_L4_INT_XWID_ERR_9 51
+#define HEART_L4_INT_XWID_ERR_A 52
+#define HEART_L4_INT_XWID_ERR_B 53
+#define HEART_L4_INT_XWID_ERR_C 54
+#define HEART_L4_INT_XWID_ERR_D 55
+#define HEART_L4_INT_XWID_ERR_E 56
+#define HEART_L4_INT_XWID_ERR_F 57
+#define HEART_L4_INT_XWID_ERR_XBOW 58
+#define HEART_L4_INT_CPU_BUS_ERR_0 59
+#define HEART_L4_INT_CPU_BUS_ERR_1 60
+#define HEART_L4_INT_CPU_BUS_ERR_2 61
+#define HEART_L4_INT_CPU_BUS_ERR_3 62
+#define HEART_L4_INT_HEART_EXCP 63
+
+extern struct ip30_heart_regs __iomem *heart_regs;
+
+#define heart_read ____raw_readq
+#define heart_write ____raw_writeq
+
+#endif /* __ASM_SGI_HEART_H */
diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h
new file mode 100644
index 000000000..c0e3dc029
--- /dev/null
+++ b/arch/mips/include/asm/sgi/hpc3.h
@@ -0,0 +1,317 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * hpc3.h: Definitions for SGI HPC3 controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1998 Ralf Baechle
+ */
+
+#ifndef _SGI_HPC3_H
+#define _SGI_HPC3_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+/* An HPC DMA descriptor. */
+struct hpc_dma_desc {
+ u32 pbuf; /* physical address of data buffer */
+ u32 cntinfo; /* counter and info bits */
+#define HPCDMA_EOX 0x80000000 /* last desc in chain for tx */
+#define HPCDMA_EOR 0x80000000 /* last desc in chain for rx */
+#define HPCDMA_EOXP 0x40000000 /* end of packet for tx */
+#define HPCDMA_EORP 0x40000000 /* end of packet for rx */
+#define HPCDMA_XIE 0x20000000 /* irq generated when at end of this desc */
+#define HPCDMA_XIU 0x01000000 /* Tx buffer in use by CPU. */
+#define HPCDMA_EIPC 0x00ff0000 /* SEEQ ethernet special xternal bytecount */
+#define HPCDMA_ETXD 0x00008000 /* set to one by HPC when packet tx'd */
+#define HPCDMA_OWN 0x00004000 /* Denotes ring buffer ownership on rx */
+#define HPCDMA_BCNT 0x00003fff /* size in bytes of this dma buffer */
+
+ u32 pnext; /* paddr of next hpc_dma_desc if any */
+};
+
+/* The set of regs for each HPC3 PBUS DMA channel. */
+struct hpc3_pbus_dmacregs {
+ volatile u32 pbdma_bptr; /* pbus dma channel buffer ptr */
+ volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */
+ u32 _unused0[0x1000/4 - 2]; /* padding */
+ volatile u32 pbdma_ctrl; /* pbus dma channel control register has
+ * completely different meaning for read
+ * compared with write */
+ /* read */
+#define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */
+#define HPC3_PDMACTRL_ISACT 0x00000002 /* channel active */
+ /* write */
+#define HPC3_PDMACTRL_SEL 0x00000002 /* little endian transfer */
+#define HPC3_PDMACTRL_RCV 0x00000004 /* direction is receive */
+#define HPC3_PDMACTRL_FLSH 0x00000008 /* enable flush for receive DMA */
+#define HPC3_PDMACTRL_ACT 0x00000010 /* start dma transfer */
+#define HPC3_PDMACTRL_LD 0x00000020 /* load enable for ACT */
+#define HPC3_PDMACTRL_RT 0x00000040 /* Use realtime GIO bus servicing */
+#define HPC3_PDMACTRL_HW 0x0000ff00 /* DMA High-water mark */
+#define HPC3_PDMACTRL_FB 0x003f0000 /* Ptr to beginning of fifo */
+#define HPC3_PDMACTRL_FE 0x3f000000 /* Ptr to end of fifo */
+
+ u32 _unused1[0x1000/4 - 1]; /* padding */
+};
+
+/* The HPC3 SCSI registers, this does not include external ones. */
+struct hpc3_scsiregs {
+ volatile u32 cbptr; /* current dma buffer ptr, diagnostic use only */
+ volatile u32 ndptr; /* next dma descriptor ptr */
+ u32 _unused0[0x1000/4 - 2]; /* padding */
+ volatile u32 bcd; /* byte count info */
+#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
+#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */
+#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */
+
+ volatile u32 ctrl; /* control register */
+#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */
+#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
+#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
+#define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */
+#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
+#define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */
+#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
+#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */
+
+ volatile u32 gfptr; /* current GIO fifo ptr */
+ volatile u32 dfptr; /* current device fifo ptr */
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
+#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */
+#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */
+#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */
+#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
+#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
+#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
+#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
+#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
+#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
+
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */
+#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */
+#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */
+#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */
+#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
+#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
+#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
+#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
+
+ u32 _unused1[0x1000/4 - 6]; /* padding */
+};
+
+/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
+struct hpc3_ethregs {
+ /* Receiver registers. */
+ volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */
+ volatile u32 rx_ndptr; /* next dma descriptor ptr */
+ u32 _unused0[0x1000/4 - 2]; /* padding */
+ volatile u32 rx_bcd; /* byte count info */
+#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
+#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */
+#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */
+
+ volatile u32 rx_ctrl; /* control register */
+#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
+#define HPC3_ERXCTRL_STAT6 0x00000040 /* Rdonly irq status */
+#define HPC3_ERXCTRL_STAT7 0x00000080 /* Rdonlt old/new status bit from Seeq */
+#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */
+#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */
+#define HPC3_ERXCTRL_AMASK 0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */
+#define HPC3_ERXCTRL_RBO 0x00000800 /* Receive buffer overflow if set to 1 */
+
+ volatile u32 rx_gfptr; /* current GIO fifo ptr */
+ volatile u32 rx_dfptr; /* current device fifo ptr */
+ u32 _unused1; /* padding */
+ volatile u32 reset; /* reset register */
+#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */
+#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
+
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */
+
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnostic ram test feature bit */
+
+ u32 _unused2[0x1000/4 - 8]; /* padding */
+
+ /* Transmitter registers. */
+ volatile u32 tx_cbptr; /* current dma buffer ptr, diagnostic use only */
+ volatile u32 tx_ndptr; /* next dma descriptor ptr */
+ u32 _unused3[0x1000/4 - 2]; /* padding */
+ volatile u32 tx_bcd; /* byte count info */
+#define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */
+#define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */
+#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */
+#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */
+#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */
+
+ volatile u32 tx_ctrl; /* control register */
+#define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */
+#define HPC3_ETXCTRL_STAT4 0x00000010 /* Indicate late collision occurred */
+#define HPC3_ETXCTRL_STAT75 0x000000e0 /* Rdonly irq status from seeq */
+#define HPC3_ETXCTRL_ENDIAN 0x00000100 /* DMA channel endian mode, 1=little 0=big */
+#define HPC3_ETXCTRL_ACTIVE 0x00000200 /* DMA tx channel is active */
+#define HPC3_ETXCTRL_AMASK 0x00000400 /* Indicates ACTIVE inhibits PIO's */
+
+ volatile u32 tx_gfptr; /* current GIO fifo ptr */
+ volatile u32 tx_dfptr; /* current device fifo ptr */
+ u32 _unused4[0x1000/4 - 4]; /* padding */
+};
+
+struct hpc3_regs {
+ /* First regs for the PBUS 8 dma channels. */
+ struct hpc3_pbus_dmacregs pbdma[8];
+
+ /* Now the HPC scsi registers, we get two scsi reg sets. */
+ struct hpc3_scsiregs scsi_chan0, scsi_chan1;
+
+ /* The SEEQ hpc3 ethernet dma/control registers. */
+ struct hpc3_ethregs ethregs;
+
+ /* Here are where the hpc3 fifo's can be directly accessed
+ * via PIO accesses. Under normal operation we never stick
+ * our grubby paws in here so it's just padding. */
+ u32 _unused0[0x18000/4];
+
+ /* HPC3 irq status regs. Due to a peculiar bug you need to
+ * look at two different register addresses to get at all of
+ * the status bits. The first reg can only reliably report
+ * bits 4:0 of the status, and the second reg can only
+ * reliably report bits 9:5 of the hpc3 irq status. I told
+ * you it was a peculiar bug. ;-)
+ */
+ volatile u32 istat0; /* Irq status, only bits <4:0> reliable. */
+#define HPC3_ISTAT_PBIMASK 0x0ff /* irq bits for pbus devs 0 --> 7 */
+#define HPC3_ISTAT_SC0MASK 0x100 /* irq bit for scsi channel 0 */
+#define HPC3_ISTAT_SC1MASK 0x200 /* irq bit for scsi channel 1 */
+
+ volatile u32 gio_misc; /* GIO misc control bits. */
+#define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */
+#define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */
+
+ u32 eeprom; /* EEPROM data reg. */
+#define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */
+#define HPC3_EEPROM_CSEL 0x02 /* Chip select */
+#define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */
+#define HPC3_EEPROM_DATO 0x08 /* Data out */
+#define HPC3_EEPROM_DATI 0x10 /* Data in */
+
+ volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */
+ volatile u32 bestat; /* Bus error interrupt status reg. */
+#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */
+#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */
+#define HPC3_BESTAT_PIDSHIFT 9
+#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */
+
+ u32 _unused1[0x14000/4 - 5]; /* padding */
+
+ /* Now direct PIO per-HPC3 peripheral access to external regs. */
+ volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */
+ u32 _unused2[0x7c00/4];
+ volatile u32 scsi1_ext[256]; /* SCSI channel 1 external regs */
+ u32 _unused3[0x7c00/4];
+ volatile u32 eth_ext[320]; /* Ethernet external registers */
+ u32 _unused4[0x3b00/4];
+
+ /* Per-peripheral device external registers and DMA/PIO control. */
+ volatile u32 pbus_extregs[16][256];
+ volatile u32 pbus_dmacfg[8][128];
+ /* Cycles to spend in D3 for reads */
+#define HPC3_DMACFG_D3R_MASK 0x00000001
+#define HPC3_DMACFG_D3R_SHIFT 0
+ /* Cycles to spend in D4 for reads */
+#define HPC3_DMACFG_D4R_MASK 0x0000001e
+#define HPC3_DMACFG_D4R_SHIFT 1
+ /* Cycles to spend in D5 for reads */
+#define HPC3_DMACFG_D5R_MASK 0x000001e0
+#define HPC3_DMACFG_D5R_SHIFT 5
+ /* Cycles to spend in D3 for writes */
+#define HPC3_DMACFG_D3W_MASK 0x00000200
+#define HPC3_DMACFG_D3W_SHIFT 9
+ /* Cycles to spend in D4 for writes */
+#define HPC3_DMACFG_D4W_MASK 0x00003c00
+#define HPC3_DMACFG_D4W_SHIFT 10
+ /* Cycles to spend in D5 for writes */
+#define HPC3_DMACFG_D5W_MASK 0x0003c000
+#define HPC3_DMACFG_D5W_SHIFT 14
+ /* Enable 16-bit DMA access mode */
+#define HPC3_DMACFG_DS16 0x00040000
+ /* Places halfwords on high 16 bits of bus */
+#define HPC3_DMACFG_EVENHI 0x00080000
+ /* Make this device real time */
+#define HPC3_DMACFG_RTIME 0x00200000
+ /* 5 bit burst count for DMA device */
+#define HPC3_DMACFG_BURST_MASK 0x07c00000
+#define HPC3_DMACFG_BURST_SHIFT 22
+ /* Use live pbus_dreq unsynchronized signal */
+#define HPC3_DMACFG_DRQLIVE 0x08000000
+ volatile u32 pbus_piocfg[16][64];
+ /* Cycles to spend in P2 state for reads */
+#define HPC3_PIOCFG_P2R_MASK 0x00001
+#define HPC3_PIOCFG_P2R_SHIFT 0
+ /* Cycles to spend in P3 state for reads */
+#define HPC3_PIOCFG_P3R_MASK 0x0001e
+#define HPC3_PIOCFG_P3R_SHIFT 1
+ /* Cycles to spend in P4 state for reads */
+#define HPC3_PIOCFG_P4R_MASK 0x001e0
+#define HPC3_PIOCFG_P4R_SHIFT 5
+ /* Cycles to spend in P2 state for writes */
+#define HPC3_PIOCFG_P2W_MASK 0x00200
+#define HPC3_PIOCFG_P2W_SHIFT 9
+ /* Cycles to spend in P3 state for writes */
+#define HPC3_PIOCFG_P3W_MASK 0x03c00
+#define HPC3_PIOCFG_P3W_SHIFT 10
+ /* Cycles to spend in P4 state for writes */
+#define HPC3_PIOCFG_P4W_MASK 0x3c000
+#define HPC3_PIOCFG_P4W_SHIFT 14
+ /* Enable 16-bit PIO accesses */
+#define HPC3_PIOCFG_DS16 0x40000
+ /* Place even address bits in bits <15:8> */
+#define HPC3_PIOCFG_EVENHI 0x80000
+
+ /* PBUS PROM control regs. */
+ volatile u32 pbus_promwe; /* PROM write enable register */
+#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */
+
+ u32 _unused5[0x0800/4 - 1];
+ volatile u32 pbus_promswap; /* Chip select swap reg */
+#define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */
+
+ u32 _unused6[0x0800/4 - 1];
+ volatile u32 pbus_gout; /* PROM general purpose output reg */
+#define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */
+
+ u32 _unused7[0x1000/4 - 1];
+ volatile u32 rtcregs[14]; /* Dallas clock registers */
+ u32 _unused8[50];
+ volatile u32 bbram[8192-50-14]; /* Battery backed ram */
+};
+
+/*
+ * It is possible to have two HPC3's within the address space on
+ * one machine, though only having one is more likely on an Indy.
+ */
+extern struct hpc3_regs *hpc3c0, *hpc3c1;
+#define HPC3_CHIP0_BASE 0x1fb80000 /* physical */
+#define HPC3_CHIP1_BASE 0x1fb00000 /* physical */
+
+extern void sgihpc_init(void);
+
+#endif /* _SGI_HPC3_H */
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
new file mode 100644
index 000000000..53c6b1ca6
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -0,0 +1,200 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ioc.h: Definitions for SGI I/O Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2001, 2003 Ladislav Michl
+ */
+
+#ifndef _SGI_IOC_H
+#define _SGI_IOC_H
+
+#include <linux/types.h>
+#include <asm/sgi/pi1.h>
+
+/*
+ * All registers are 8-bit wide aligned on 32-bit boundary. Bad things
+ * happen if you try word access them. You have been warned.
+ */
+
+struct sgioc_uart_regs {
+ u8 _ctrl1[3];
+ volatile u8 ctrl1;
+ u8 _data1[3];
+ volatile u8 data1;
+ u8 _ctrl2[3];
+ volatile u8 ctrl2;
+ u8 _data2[3];
+ volatile u8 data2;
+};
+
+struct sgioc_keyb_regs {
+ u8 _data[3];
+ volatile u8 data;
+ u8 _command[3];
+ volatile u8 command;
+};
+
+struct sgint_regs {
+ u8 _istat0[3];
+ volatile u8 istat0; /* Interrupt status zero */
+#define SGINT_ISTAT0_FFULL 0x01
+#define SGINT_ISTAT0_SCSI0 0x02
+#define SGINT_ISTAT0_SCSI1 0x04
+#define SGINT_ISTAT0_ENET 0x08
+#define SGINT_ISTAT0_GFXDMA 0x10
+#define SGINT_ISTAT0_PPORT 0x20
+#define SGINT_ISTAT0_HPC2 0x40
+#define SGINT_ISTAT0_LIO2 0x80
+ u8 _imask0[3];
+ volatile u8 imask0; /* Interrupt mask zero */
+ u8 _istat1[3];
+ volatile u8 istat1; /* Interrupt status one */
+#define SGINT_ISTAT1_ISDNI 0x01
+#define SGINT_ISTAT1_PWR 0x02
+#define SGINT_ISTAT1_ISDNH 0x04
+#define SGINT_ISTAT1_LIO3 0x08
+#define SGINT_ISTAT1_HPC3 0x10
+#define SGINT_ISTAT1_AFAIL 0x20
+#define SGINT_ISTAT1_VIDEO 0x40
+#define SGINT_ISTAT1_GIO2 0x80
+ u8 _imask1[3];
+ volatile u8 imask1; /* Interrupt mask one */
+ u8 _vmeistat[3];
+ volatile u8 vmeistat; /* VME interrupt status */
+ u8 _cmeimask0[3];
+ volatile u8 cmeimask0; /* VME interrupt mask zero */
+ u8 _cmeimask1[3];
+ volatile u8 cmeimask1; /* VME interrupt mask one */
+ u8 _cmepol[3];
+ volatile u8 cmepol; /* VME polarity */
+ u8 _tclear[3];
+ volatile u8 tclear;
+ u8 _errstat[3];
+ volatile u8 errstat; /* Error status reg, reserved on INT2 */
+ u32 _unused0[2];
+ u8 _tcnt0[3];
+ volatile u8 tcnt0; /* counter 0 */
+ u8 _tcnt1[3];
+ volatile u8 tcnt1; /* counter 1 */
+ u8 _tcnt2[3];
+ volatile u8 tcnt2; /* counter 2 */
+ u8 _tcword[3];
+ volatile u8 tcword; /* control word */
+#define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */
+#define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */
+#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */
+#define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */
+#define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */
+#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */
+#define SGINT_TCWORD_MSWST 0x08 /* Software strobe */
+#define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */
+#define SGINT_TCWORD_CMASK 0x30 /* Command mask */
+#define SGINT_TCWORD_CLAT 0x00 /* Latch command */
+#define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */
+#define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */
+#define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */
+#define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */
+#define SGINT_TCWORD_CNT1 0x40 /* Select counter one */
+#define SGINT_TCWORD_CNT2 0x80 /* Select counter two */
+#define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */
+};
+
+/*
+ * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz
+ */
+#define SGINT_TIMER_CLOCK 1000000
+
+/*
+ * This is the constant we're using for calibrating the counter.
+ */
+#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255)
+
+/* We need software copies of these because they are write only. */
+extern u8 sgi_ioc_reset, sgi_ioc_write;
+
+struct sgioc_regs {
+ struct pi1_regs pport;
+ u32 _unused0[2];
+ struct sgioc_uart_regs uart;
+ struct sgioc_keyb_regs kbdmouse;
+ u8 _gcsel[3];
+ volatile u8 gcsel;
+ u8 _genctrl[3];
+ volatile u8 genctrl;
+ u8 _panel[3];
+ volatile u8 panel;
+#define SGIOC_PANEL_POWERON 0x01
+#define SGIOC_PANEL_POWERINTR 0x02
+#define SGIOC_PANEL_VOLDNINTR 0x10
+#define SGIOC_PANEL_VOLDNHOLD 0x20
+#define SGIOC_PANEL_VOLUPINTR 0x40
+#define SGIOC_PANEL_VOLUPHOLD 0x80
+ u32 _unused1;
+ u8 _sysid[3];
+ volatile u8 sysid;
+#define SGIOC_SYSID_FULLHOUSE 0x01
+#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1)
+#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5)
+ u32 _unused2;
+ u8 _read[3];
+ volatile u8 read;
+ u32 _unused3;
+ u8 _dmasel[3];
+ volatile u8 dmasel;
+#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */
+#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */
+#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */
+#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */
+#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */
+ u32 _unused4;
+ u8 _reset[3];
+ volatile u8 reset;
+#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */
+#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */
+#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */
+#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */
+#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */
+#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */
+ u32 _unused5;
+ u8 _write[3];
+ volatile u8 write;
+#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */
+#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
+#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
+#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
+#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */
+#define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */
+ u32 _unused6;
+ struct sgint_regs int3;
+ u32 _unused7[16];
+ volatile u32 extio; /* FullHouse only */
+#define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */
+#define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */
+#define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */
+#define EXTIO_S0_RETRACE 0x1000
+#define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */
+#define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */
+#define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */
+#define EXTIO_SG_RETRACE 0x0100
+#define EXTIO_GIO_33MHZ 0x0080
+#define EXTIO_EISA_BUSERR 0x0040
+#define EXTIO_MC_BUSERR 0x0020
+#define EXTIO_HPC3_BUSERR 0x0010
+#define EXTIO_S0_STAT_1 0x0008
+#define EXTIO_S0_STAT_0 0x0004
+#define EXTIO_SG_STAT_1 0x0002
+#define EXTIO_SG_STAT_0 0x0001
+};
+
+extern struct sgioc_regs *sgioc;
+extern struct sgint_regs *sgint;
+
+#endif
diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h
new file mode 100644
index 000000000..87ec9eaa0
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ip22.h
@@ -0,0 +1,80 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ip22.h: Definitions for SGI IP22 machines
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ */
+
+#ifndef _SGI_IP22_H
+#define _SGI_IP22_H
+
+/*
+ * These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
+ * are not supported this way. Driver is supposed to allocate HPC/MC
+ * interrupt as shareable and then look to proper status bit (see
+ * HAL2 driver). This will prevent many complications, trust me ;-)
+ */
+
+#include <irq.h>
+#include <asm/sgi/ioc.h>
+
+#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */
+#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */
+#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */
+#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */
+#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */
+
+/*
+ * Individual interrupt definitions for the Indy and Indigo2
+ */
+
+#define SGI_SOFT_0_IRQ SGINT_CPU + 0
+#define SGI_SOFT_1_IRQ SGINT_CPU + 1
+#define SGI_LOCAL_0_IRQ SGINT_CPU + 2
+#define SGI_LOCAL_1_IRQ SGINT_CPU + 3
+#define SGI_8254_0_IRQ SGINT_CPU + 4
+#define SGI_8254_1_IRQ SGINT_CPU + 5
+#define SGI_BUSERR_IRQ SGINT_CPU + 6
+#define SGI_TIMER_IRQ SGINT_CPU + 7
+
+#define SGI_FIFO_IRQ SGINT_LOCAL0 + 0 /* FIFO full */
+#define SGI_GIO_0_IRQ SGI_FIFO_IRQ /* GIO-0 */
+#define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */
+#define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */
+#define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */
+#define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */
+#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */
+#define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */
+#define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */
+
+#define SGI_GPL0_IRQ SGINT_LOCAL1 + 0 /* General Purpose LOCAL1_N<0> */
+#define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */
+#define SGI_GPL2_IRQ SGINT_LOCAL1 + 2 /* General Purpose LOCAL1_N<2> */
+#define SGI_MAP_1_IRQ SGINT_LOCAL1 + 3 /* Mappable interrupt 1 */
+#define SGI_HPCDMA_IRQ SGINT_LOCAL1 + 4 /* HPC DMA done */
+#define SGI_ACFAIL_IRQ SGINT_LOCAL1 + 5 /* AC fail */
+#define SGI_VINO_IRQ SGINT_LOCAL1 + 6 /* Indy VINO */
+#define SGI_GIO_2_IRQ SGINT_LOCAL1 + 7 /* Vert retrace / GIO-2 */
+
+/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */
+#define SGI_VERT_IRQ SGINT_LOCAL2 + 0 /* INT3: newport vertical status */
+#define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */
+#define SGI_KEYBD_IRQ SGINT_LOCAL2 + 4 /* keyboard */
+#define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */
+#define SGI_GIOEXP0_IRQ (SGINT_LOCAL2 + 6) /* Indy GIO EXP0 */
+#define SGI_GIOEXP1_IRQ (SGINT_LOCAL2 + 7) /* Indy GIO EXP1 */
+
+#define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
+
+extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg);
+extern unsigned short ip22_nvram_read(int reg);
+
+#endif
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
new file mode 100644
index 000000000..3a070cec9
--- /dev/null
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -0,0 +1,231 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * mc.h: Definitions for SGI Memory Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#ifndef _SGI_MC_H
+#define _SGI_MC_H
+
+struct sgimc_regs {
+ u32 _unused0;
+ volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
+ u32 _unused1;
+ volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
+
+ u32 _unused2;
+ volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
+
+ u32 _unused3;
+ volatile u32 systemid; /* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
+
+ u32 _unused4[3];
+ volatile u32 divider; /* Divider reg for RPSS */
+
+ u32 _unused5;
+ u32 eeprom; /* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
+
+ u32 _unused6[3];
+ volatile u32 rcntpre; /* Preload refresh counter */
+
+ u32 _unused7;
+ volatile u32 rcounter; /* Readonly refresh counter */
+
+ u32 _unused8[13];
+ volatile u32 giopar; /* Parameter word for GIO64 */
+#define SGIMC_GIOPAR_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPAR_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPAR_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPAR_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
+
+ u32 _unused9;
+ volatile u32 cputp; /* CPU bus arb time period */
+
+ u32 _unused10[3];
+ volatile u32 lbursttp; /* Time period for long bursts */
+
+ /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
+ * be the same size. The size encoding for supported SIMMs is bellow */
+ u32 _unused11[9];
+ volatile u32 mconfig0; /* Memory config register zero */
+ u32 _unused12;
+ volatile u32 mconfig1; /* Memory config register one */
+#define SGIMC_MCONFIG_BASEADDR 0x000000ff /* Base address of bank*/
+#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
+#define SGIMC_MCONFIG_BVALID 0x00002000 /* Bank is valid */
+#define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */
+
+ u32 _unused13;
+ volatile u32 cmacc; /* Mem access config for CPU */
+ u32 _unused14;
+ volatile u32 gmacc; /* Mem access config for GIO */
+
+ /* This define applies to both cmacc and gmacc registers above. */
+#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
+
+ /* Error address/status regs from GIO and CPU perspectives. */
+ u32 _unused15;
+ volatile u32 cerr; /* Error address reg for CPU */
+ u32 _unused16;
+ volatile u32 cstat; /* Status reg for CPU */
+#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
+
+ u32 _unused17;
+ volatile u32 gerr; /* Error address reg for GIO */
+ u32 _unused18;
+ volatile u32 gstat; /* Status reg for GIO */
+#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */
+
+ /* Special hard bus locking registers. */
+ u32 _unused19;
+ volatile u32 syssembit; /* Uni-bit system semaphore */
+ u32 _unused20;
+ volatile u32 mlock; /* Global GIO memory access lock */
+ u32 _unused21;
+ volatile u32 elock; /* Locks EISA from GIO accesses */
+
+ /* GIO dma control registers. */
+ u32 _unused22[15];
+ volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */
+ u32 _unused23;
+ volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */
+ u32 _unused24;
+ volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
+ u32 _unused25;
+ volatile u32 dma_ctrl; /* Main DMA control reg */
+
+ /* DMA TLB entry 0 */
+ u32 _unused26[5];
+ volatile u32 dtlb_hi0;
+ u32 _unused27;
+ volatile u32 dtlb_lo0;
+
+ /* DMA TLB entry 1 */
+ u32 _unused28;
+ volatile u32 dtlb_hi1;
+ u32 _unused29;
+ volatile u32 dtlb_lo1;
+
+ /* DMA TLB entry 2 */
+ u32 _unused30;
+ volatile u32 dtlb_hi2;
+ u32 _unused31;
+ volatile u32 dtlb_lo2;
+
+ /* DMA TLB entry 3 */
+ u32 _unused32;
+ volatile u32 dtlb_hi3;
+ u32 _unused33;
+ volatile u32 dtlb_lo3;
+
+ u32 _unused34[0x0392];
+
+ u32 _unused35;
+ volatile u32 rpsscounter; /* Chirps at 100ns */
+
+ u32 _unused36[0x1000/4-2*4];
+
+ u32 _unused37;
+ volatile u32 maddronly; /* Address DMA goes at */
+ u32 _unused38;
+ volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
+ u32 _unused39;
+ volatile u32 dmasz; /* DMA count */
+ u32 _unused40;
+ volatile u32 ssize; /* DMA stride size */
+ u32 _unused41;
+ volatile u32 gmaddronly; /* Set GIO DMA but don't start trans */
+ u32 _unused42;
+ volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
+ u32 _unused43;
+ volatile u32 dmamode; /* DMA mode config bit settings */
+ u32 _unused44;
+ volatile u32 dmaccount; /* Zoom and byte count for DMA */
+ u32 _unused45;
+ volatile u32 dmastart; /* Pedal to the metal. */
+ u32 _unused46;
+ volatile u32 dmarunning; /* DMA op is in progress */
+ u32 _unused47;
+ volatile u32 maddrdefstart; /* Set dma addr, defaults, and kick it */
+};
+
+extern struct sgimc_regs *sgimc;
+#define SGIMC_BASE 0x1fa00000 /* physical */
+
+/* Base location of the two ram banks found in IP2[0268] machines. */
+#define SGIMC_SEG0_BADDR 0x08000000
+#define SGIMC_SEG1_BADDR 0x20000000
+
+/* Maximum size of the above banks are per machine. */
+#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
+
+extern void sgimc_init(void);
+
+#endif /* _SGI_MC_H */
diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h
new file mode 100644
index 000000000..88b814ef3
--- /dev/null
+++ b/arch/mips/include/asm/sgi/pi1.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * pi1.h: Definitions for SGI PI1 parallel port
+ */
+
+#ifndef _SGI_PI1_H
+#define _SGI_PI1_H
+
+struct pi1_regs {
+ u8 _data[3];
+ volatile u8 data;
+ u8 _ctrl[3];
+ volatile u8 ctrl;
+#define PI1_CTRL_STROBE_N 0x01
+#define PI1_CTRL_AFD_N 0x02
+#define PI1_CTRL_INIT_N 0x04
+#define PI1_CTRL_SLIN_N 0x08
+#define PI1_CTRL_IRQ_ENA 0x10
+#define PI1_CTRL_DIR 0x20
+#define PI1_CTRL_SEL 0x40
+ u8 _status[3];
+ volatile u8 status;
+#define PI1_STAT_DEVID 0x03 /* bits 0-1 */
+#define PI1_STAT_NOINK 0x04 /* SGI MODE only */
+#define PI1_STAT_ERROR 0x08
+#define PI1_STAT_ONLINE 0x10
+#define PI1_STAT_PE 0x20
+#define PI1_STAT_ACK 0x40
+#define PI1_STAT_BUSY 0x80
+ u8 _dmactrl[3];
+ volatile u8 dmactrl;
+#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */
+#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */
+#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */
+#define PI1_DMACTRL_READ 0x40 /* read */
+#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */
+ u8 _intstat[3];
+ volatile u8 intstat;
+#define PI1_INTSTAT_ACK 0x04
+#define PI1_INTSTAT_FEMPTY 0x08
+#define PI1_INTSTAT_NOINK 0x10
+#define PI1_INTSTAT_ONLINE 0x20
+#define PI1_INTSTAT_ERR 0x40
+#define PI1_INTSTAT_PE 0x80
+ u8 _intmask[3];
+ volatile u8 intmask; /* enabled low, reset high*/
+#define PI1_INTMASK_ACK 0x04
+#define PI1_INTMASK_FIFO_EMPTY 0x08
+#define PI1_INTMASK_NOINK 0x10
+#define PI1_INTMASK_ONLINE 0x20
+#define PI1_INTMASK_ERR 0x40
+#define PI1_INTMASK_PE 0x80
+ u8 _timer1[3];
+ volatile u8 timer1;
+#define PI1_TIME1 0x27
+ u8 _timer2[3];
+ volatile u8 timer2;
+#define PI1_TIME2 0x13
+ u8 _timer3[3];
+ volatile u8 timer3;
+#define PI1_TIME3 0x10
+ u8 _timer4[3];
+ volatile u8 timer4;
+#define PI1_TIME4 0x00
+};
+
+#endif
diff --git a/arch/mips/include/asm/sgi/seeq.h b/arch/mips/include/asm/sgi/seeq.h
new file mode 100644
index 000000000..af0ffd768
--- /dev/null
+++ b/arch/mips/include/asm/sgi/seeq.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_SEEQ_H
+#define __ASM_SGI_SEEQ_H
+
+#include <linux/if_ether.h>
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiseeq_platform_data {
+ struct hpc3_regs *hpc;
+ unsigned int irq;
+ unsigned char mac[ETH_ALEN];
+};
+
+#endif /* __ASM_SGI_SEEQ_H */
diff --git a/arch/mips/include/asm/sgi/wd.h b/arch/mips/include/asm/sgi/wd.h
new file mode 100644
index 000000000..0d6c3a4da
--- /dev/null
+++ b/arch/mips/include/asm/sgi/wd.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_WD_H
+#define __ASM_SGI_WD_H
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiwd93_platform_data {
+ unsigned int unit;
+ unsigned int irq;
+ struct hpc3_scsiregs *hregs;
+ unsigned char *wdregs;
+};
+
+#endif /* __ASM_SGI_WD_H */