Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 162 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
new file mode 100644
index 000000000..d4392efd2
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_SDK7780
+
+choice
+	prompt "SDK7780 options"
+	default SH_SDK7780_BASE
+
+config SH_SDK7780_BASE
+	bool "SDK7780 with base-board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the expansion
+	  baseboard devices. If in doubt, say Y.
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
new file mode 100644
index 000000000..37e857f9a
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7780/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the SDK7780 specific parts of the kernel
+#
+obj-y	 := setup.o irq.o
+
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
new file mode 100644
index 000000000..fa392f3dc
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7780/irq.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/renesas/sdk7780/irq.c
+ *
+ * Renesas Technology Europe SDK7780 Support.
+ *
+ * Copyright (C) 2008  Nicholas Beck <nbeck@mpc-data.co.uk>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/sdk7780.h>
+
+enum {
+	UNUSED = 0,
+	/* board specific interrupt sources */
+	SMC91C111,	/* Ethernet controller */
+};
+
+static struct intc_vect fpga_vectors[] __initdata = {
+	INTC_IRQ(SMC91C111, IRQ_ETHERNET),
+};
+
+static struct intc_mask_reg fpga_mask_registers[] __initdata = {
+	{ 0, FPGA_IRQ0MR, 16,
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
+			 NULL, fpga_mask_registers, NULL, NULL);
+
+void __init init_sdk7780_IRQ(void)
+{
+	printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
+
+	__raw_writew(0xFFFF, FPGA_IRQ0MR);
+	/* Setup IRL 0-3 */
+	__raw_writew(0x0003, FPGA_IMSR);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	register_intc_controller(&fpga_intc_desc);
+}
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
new file mode 100644
index 000000000..482761b78
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/boards/renesas/sdk7780/setup.c
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/machvec.h>
+#include <mach/sdk7780.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#define GPIO_PECR        0xFFEA0008
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_ETHERNET,
+		.end    = IRQ_ETHERNET,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *sdk7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init sdk7780_devices_setup(void)
+{
+	return platform_add_devices(sdk7780_devices,
+		ARRAY_SIZE(sdk7780_devices));
+}
+device_initcall(sdk7780_devices_setup);
+
+static void __init sdk7780_setup(char **cmdline_p)
+{
+	u16 ver = __raw_readw(FPGA_FPVERR);
+	u16 dateStamp = __raw_readw(FPGA_FPDATER);
+
+	printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d), datestamp : %d\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf,
+			 dateStamp);
+
+	/* Setup pin mux'ing for PCIC */
+	__raw_writew(0x0000, GPIO_PECR);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name        = "Renesas SDK7780-R3" ,
+	.mv_setup		= sdk7780_setup,
+	.mv_init_irq	= init_sdk7780_IRQ,
+};
+