Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2231 insertions, 0 deletions

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
new file mode 100644
index 000000000..e7e8e624a
--- /dev/null
+++ b/drivers/edac/altera_edac.c
@@ -0,0 +1,2231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2017-2018, Intel Corporation. All rights reserved
+ *  Copyright Altera Corporation (C) 2014-2016. All rights reserved.
+ *  Copyright 2011-2012 Calxeda, Inc.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/firmware/intel/stratix10-smc.h>
+#include <linux/genalloc.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/kernel.h>
+#include <linux/mfd/altera-sysmgr.h>
+#include <linux/mfd/syscon.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/panic_notifier.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include "altera_edac.h"
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"altera_edac"
+#define EDAC_DEVICE		"Altera"
+
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+static const struct altr_sdram_prv_data c5_data = {
+	.ecc_ctrl_offset    = CV_CTLCFG_OFST,
+	.ecc_ctl_en_mask    = CV_CTLCFG_ECC_AUTO_EN,
+	.ecc_stat_offset    = CV_DRAMSTS_OFST,
+	.ecc_stat_ce_mask   = CV_DRAMSTS_SBEERR,
+	.ecc_stat_ue_mask   = CV_DRAMSTS_DBEERR,
+	.ecc_saddr_offset   = CV_ERRADDR_OFST,
+	.ecc_daddr_offset   = CV_ERRADDR_OFST,
+	.ecc_cecnt_offset   = CV_SBECOUNT_OFST,
+	.ecc_uecnt_offset   = CV_DBECOUNT_OFST,
+	.ecc_irq_en_offset  = CV_DRAMINTR_OFST,
+	.ecc_irq_en_mask    = CV_DRAMINTR_INTREN,
+	.ecc_irq_clr_offset = CV_DRAMINTR_OFST,
+	.ecc_irq_clr_mask   = (CV_DRAMINTR_INTRCLR | CV_DRAMINTR_INTREN),
+	.ecc_cnt_rst_offset = CV_DRAMINTR_OFST,
+	.ecc_cnt_rst_mask   = CV_DRAMINTR_INTRCLR,
+	.ce_ue_trgr_offset  = CV_CTLCFG_OFST,
+	.ce_set_mask        = CV_CTLCFG_GEN_SB_ERR,
+	.ue_set_mask        = CV_CTLCFG_GEN_DB_ERR,
+};
+
+static const struct altr_sdram_prv_data a10_data = {
+	.ecc_ctrl_offset    = A10_ECCCTRL1_OFST,
+	.ecc_ctl_en_mask    = A10_ECCCTRL1_ECC_EN,
+	.ecc_stat_offset    = A10_INTSTAT_OFST,
+	.ecc_stat_ce_mask   = A10_INTSTAT_SBEERR,
+	.ecc_stat_ue_mask   = A10_INTSTAT_DBEERR,
+	.ecc_saddr_offset   = A10_SERRADDR_OFST,
+	.ecc_daddr_offset   = A10_DERRADDR_OFST,
+	.ecc_irq_en_offset  = A10_ERRINTEN_OFST,
+	.ecc_irq_en_mask    = A10_ECC_IRQ_EN_MASK,
+	.ecc_irq_clr_offset = A10_INTSTAT_OFST,
+	.ecc_irq_clr_mask   = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
+	.ecc_cnt_rst_offset = A10_ECCCTRL1_OFST,
+	.ecc_cnt_rst_mask   = A10_ECC_CNT_RESET_MASK,
+	.ce_ue_trgr_offset  = A10_DIAGINTTEST_OFST,
+	.ce_set_mask        = A10_DIAGINT_TSERRA_MASK,
+	.ue_set_mask        = A10_DIAGINT_TDERRA_MASK,
+};
+
+/*********************** EDAC Memory Controller Functions ****************/
+
+/* The SDRAM controller uses the EDAC Memory Controller framework.       */
+
+static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	const struct altr_sdram_prv_data *priv = drvdata->data;
+	u32 status, err_count = 1, err_addr;
+
+	regmap_read(drvdata->mc_vbase, priv->ecc_stat_offset, &status);
+
+	if (status & priv->ecc_stat_ue_mask) {
+		regmap_read(drvdata->mc_vbase, priv->ecc_daddr_offset,
+			    &err_addr);
+		if (priv->ecc_uecnt_offset)
+			regmap_read(drvdata->mc_vbase, priv->ecc_uecnt_offset,
+				    &err_count);
+		panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
+		      err_count, err_addr);
+	}
+	if (status & priv->ecc_stat_ce_mask) {
+		regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
+			    &err_addr);
+		if (priv->ecc_uecnt_offset)
+			regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
+				    &err_count);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1, mci->ctl_name, "");
+		/* Clear IRQ to resume */
+		regmap_write(drvdata->mc_vbase,	priv->ecc_irq_clr_offset,
+			     priv->ecc_irq_clr_mask);
+
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
+					    const char __user *data,
+					    size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	const struct altr_sdram_prv_data *priv = drvdata->data;
+	u32 *ptemp;
+	dma_addr_t dma_handle;
+	u32 reg, read_reg;
+
+	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
+	if (!ptemp) {
+		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Inject: Buffer Allocation error\n");
+		return -ENOMEM;
+	}
+
+	regmap_read(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
+		    &read_reg);
+	read_reg &= ~(priv->ce_set_mask | priv->ue_set_mask);
+
+	/* Error are injected by writing a word while the SBE or DBE
+	 * bit in the CTLCFG register is set. Reading the word will
+	 * trigger the SBE or DBE error and the corresponding IRQ.
+	 */
+	if (count == 3) {
+		edac_printk(KERN_ALERT, EDAC_MC,
+			    "Inject Double bit error\n");
+		local_irq_disable();
+		regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
+			     (read_reg | priv->ue_set_mask));
+		local_irq_enable();
+	} else {
+		edac_printk(KERN_ALERT, EDAC_MC,
+			    "Inject Single bit error\n");
+		local_irq_disable();
+		regmap_write(drvdata->mc_vbase,	priv->ce_ue_trgr_offset,
+			     (read_reg | priv->ce_set_mask));
+		local_irq_enable();
+	}
+
+	ptemp[0] = 0x5A5A5A5A;
+	ptemp[1] = 0xA5A5A5A5;
+
+	/* Clear the error injection bits */
+	regmap_write(drvdata->mc_vbase,	priv->ce_ue_trgr_offset, read_reg);
+	/* Ensure it has been written out */
+	wmb();
+
+	/*
+	 * To trigger the error, we need to read the data back
+	 * (the data was written with errors above).
+	 * The READ_ONCE macros and printk are used to prevent the
+	 * the compiler optimizing these reads out.
+	 */
+	reg = READ_ONCE(ptemp[0]);
+	read_reg = READ_ONCE(ptemp[1]);
+	/* Force Read */
+	rmb();
+
+	edac_printk(KERN_ALERT, EDAC_MC, "Read Data [0x%X, 0x%X]\n",
+		    reg, read_reg);
+
+	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+
+	return count;
+}
+
+static const struct file_operations altr_sdr_mc_debug_inject_fops = {
+	.open = simple_open,
+	.write = altr_sdr_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	if (!mci->debugfs)
+		return;
+
+	edac_debugfs_create_file("altr_trigger", S_IWUSR, mci->debugfs, mci,
+				 &altr_sdr_mc_debug_inject_fops);
+}
+
+/* Get total memory size from Open Firmware DTB */
+static unsigned long get_total_mem(void)
+{
+	struct device_node *np = NULL;
+	struct resource res;
+	int ret;
+	unsigned long total_mem = 0;
+
+	for_each_node_by_type(np, "memory") {
+		ret = of_address_to_resource(np, 0, &res);
+		if (ret)
+			continue;
+
+		total_mem += resource_size(&res);
+	}
+	edac_dbg(0, "total_mem 0x%lx\n", total_mem);
+	return total_mem;
+}
+
+static const struct of_device_id altr_sdram_ctrl_of_match[] = {
+	{ .compatible = "altr,sdram-edac", .data = &c5_data},
+	{ .compatible = "altr,sdram-edac-a10", .data = &a10_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
+
+static int a10_init(struct regmap *mc_vbase)
+{
+	if (regmap_update_bits(mc_vbase, A10_INTMODE_OFST,
+			       A10_INTMODE_SB_INT, A10_INTMODE_SB_INT)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error setting SB IRQ mode\n");
+		return -ENODEV;
+	}
+
+	if (regmap_write(mc_vbase, A10_SERRCNTREG_OFST, 1)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error setting trigger count\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int a10_unmask_irq(struct platform_device *pdev, u32 mask)
+{
+	void __iomem  *sm_base;
+	int  ret = 0;
+
+	if (!request_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32),
+				dev_name(&pdev->dev))) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to request mem region\n");
+		return -EBUSY;
+	}
+
+	sm_base = ioremap(A10_SYMAN_INTMASK_CLR, sizeof(u32));
+	if (!sm_base) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to ioremap device\n");
+
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	iowrite32(mask, sm_base);
+
+	iounmap(sm_base);
+
+release:
+	release_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32));
+
+	return ret;
+}
+
+static int altr_sdram_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct altr_sdram_mc_data *drvdata;
+	const struct altr_sdram_prv_data *priv;
+	struct regmap *mc_vbase;
+	struct dimm_info *dimm;
+	u32 read_reg;
+	int irq, irq2, res = 0;
+	unsigned long mem_size, irqflags = 0;
+
+	id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	/* Grab the register range from the sdr controller in device tree */
+	mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						   "altr,sdr-syscon");
+	if (IS_ERR(mc_vbase)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "regmap for altr,sdr-syscon lookup failed.\n");
+		return -ENODEV;
+	}
+
+	/* Check specific dependencies for the module */
+	priv = of_match_node(altr_sdram_ctrl_of_match,
+			     pdev->dev.of_node)->data;
+
+	/* Validate the SDRAM controller has ECC enabled */
+	if (regmap_read(mc_vbase, priv->ecc_ctrl_offset, &read_reg) ||
+	    ((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No ECC/ECC disabled [0x%08X]\n", read_reg);
+		return -ENODEV;
+	}
+
+	/* Grab memory size from device tree. */
+	mem_size = get_total_mem();
+	if (!mem_size) {
+		edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n");
+		return -ENODEV;
+	}
+
+	/* Ensure the SDRAM Interrupt is disabled */
+	if (regmap_update_bits(mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error disabling SDRAM ECC IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Toggle to clear the SDRAM Error count */
+	if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask,
+			       priv->ecc_cnt_rst_mask)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		return -ENODEV;
+	}
+
+	if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No irq %d in DT\n", irq);
+		return irq;
+	}
+
+	/* Arria10 has a 2nd IRQ */
+	irq2 = platform_get_irq(pdev, 1);
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct altr_sdram_mc_data));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	drvdata->mc_vbase = mc_vbase;
+	drvdata->data = priv;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to get managed device resource\n");
+		res = -ENOMEM;
+		goto free;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->dev_name = dev_name(&pdev->dev);
+
+	dimm = *mci->dimms;
+	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	res = edac_mc_add_mc(mci);
+	if (res < 0)
+		goto err;
+
+	/* Only the Arria10 has separate IRQs */
+	if (of_machine_is_compatible("altr,socfpga-arria10")) {
+		/* Arria10 specific initialization */
+		res = a10_init(mc_vbase);
+		if (res < 0)
+			goto err2;
+
+		res = devm_request_irq(&pdev->dev, irq2,
+				       altr_sdram_mc_err_handler,
+				       IRQF_SHARED, dev_name(&pdev->dev), mci);
+		if (res < 0) {
+			edac_mc_printk(mci, KERN_ERR,
+				       "Unable to request irq %d\n", irq2);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK);
+		if (res < 0)
+			goto err2;
+
+		irqflags = IRQF_SHARED;
+	}
+
+	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
+			       irqflags, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Unable to request irq %d\n", irq);
+		res = -ENODEV;
+		goto err2;
+	}
+
+	/* Infrastructure ready - enable the IRQ */
+	if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Error enabling SDRAM ECC IRQ\n");
+		res = -ENODEV;
+		goto err2;
+	}
+
+	altr_sdr_mc_create_debugfs_nodes(mci);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, NULL);
+free:
+	edac_mc_free(mci);
+	edac_printk(KERN_ERR, EDAC_MC,
+		    "EDAC Probe Failed; Error %d\n", res);
+
+	return res;
+}
+
+static int altr_sdram_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/*
+ * If you want to suspend, need to disable EDAC by removing it
+ * from the device tree or defconfig.
+ */
+#ifdef CONFIG_PM
+static int altr_sdram_prepare(struct device *dev)
+{
+	pr_err("Suspend not allowed when EDAC is enabled.\n");
+
+	return -EPERM;
+}
+
+static const struct dev_pm_ops altr_sdram_pm_ops = {
+	.prepare = altr_sdram_prepare,
+};
+#endif
+
+static struct platform_driver altr_sdram_edac_driver = {
+	.probe = altr_sdram_probe,
+	.remove = altr_sdram_remove,
+	.driver = {
+		.name = "altr_sdram_edac",
+#ifdef CONFIG_PM
+		.pm = &altr_sdram_pm_ops,
+#endif
+		.of_match_table = altr_sdram_ctrl_of_match,
+	},
+};
+
+module_platform_driver(altr_sdram_edac_driver);
+
+#endif	/* CONFIG_EDAC_ALTERA_SDRAM */
+
+/************************* EDAC Parent Probe *************************/
+
+static const struct of_device_id altr_edac_device_of_match[];
+
+static const struct of_device_id altr_edac_of_match[] = {
+	{ .compatible = "altr,socfpga-ecc-manager" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_of_match);
+
+static int altr_edac_probe(struct platform_device *pdev)
+{
+	of_platform_populate(pdev->dev.of_node, altr_edac_device_of_match,
+			     NULL, &pdev->dev);
+	return 0;
+}
+
+static struct platform_driver altr_edac_driver = {
+	.probe =  altr_edac_probe,
+	.driver = {
+		.name = "socfpga_ecc_manager",
+		.of_match_table = altr_edac_of_match,
+	},
+};
+module_platform_driver(altr_edac_driver);
+
+/************************* EDAC Device Functions *************************/
+
+/*
+ * EDAC Device Functions (shared between various IPs).
+ * The discrete memories use the EDAC Device framework. The probe
+ * and error handling functions are very similar between memories
+ * so they are shared. The memory allocation and freeing for EDAC
+ * trigger testing are different for each memory.
+ */
+
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+static const struct edac_device_prv_data ocramecc_data;
+#endif
+#ifdef CONFIG_EDAC_ALTERA_L2C
+static const struct edac_device_prv_data l2ecc_data;
+#endif
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+static const struct edac_device_prv_data a10_ocramecc_data;
+#endif
+#ifdef CONFIG_EDAC_ALTERA_L2C
+static const struct edac_device_prv_data a10_l2ecc_data;
+#endif
+
+static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
+{
+	irqreturn_t ret_value = IRQ_NONE;
+	struct edac_device_ctl_info *dci = dev_id;
+	struct altr_edac_device_dev *drvdata = dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+
+	if (irq == drvdata->sb_irq) {
+		if (priv->ce_clear_mask)
+			writel(priv->ce_clear_mask, drvdata->base);
+		edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name);
+		ret_value = IRQ_HANDLED;
+	} else if (irq == drvdata->db_irq) {
+		if (priv->ue_clear_mask)
+			writel(priv->ue_clear_mask, drvdata->base);
+		edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+		ret_value = IRQ_HANDLED;
+	} else {
+		WARN_ON(1);
+	}
+
+	return ret_value;
+}
+
+static ssize_t __maybe_unused
+altr_edac_device_trig(struct file *file, const char __user *user_buf,
+		      size_t count, loff_t *ppos)
+
+{
+	u32 *ptemp, i, error_mask;
+	int result = 0;
+	u8 trig_type;
+	unsigned long flags;
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void *generic_ptr = edac_dci->dev;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	if (!priv->alloc_mem)
+		return -ENOMEM;
+
+	/*
+	 * Note that generic_ptr is initialized to the device * but in
+	 * some alloc_functions, this is overridden and returns data.
+	 */
+	ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
+	if (!ptemp) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Inject: Buffer Allocation error\n");
+		return -ENOMEM;
+	}
+
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		error_mask = priv->ue_set_mask;
+	else
+		error_mask = priv->ce_set_mask;
+
+	edac_printk(KERN_ALERT, EDAC_DEVICE,
+		    "Trigger Error Mask (0x%X)\n", error_mask);
+
+	local_irq_save(flags);
+	/* write ECC corrupted data out. */
+	for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) {
+		/* Read data so we're in the correct state */
+		rmb();
+		if (READ_ONCE(ptemp[i]))
+			result = -1;
+		/* Toggle Error bit (it is latched), leave ECC enabled */
+		writel(error_mask, (drvdata->base + priv->set_err_ofst));
+		writel(priv->ecc_enable_mask, (drvdata->base +
+					       priv->set_err_ofst));
+		ptemp[i] = i;
+	}
+	/* Ensure it has been written out */
+	wmb();
+	local_irq_restore(flags);
+
+	if (result)
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n");
+
+	/* Read out written data. ECC error caused here */
+	for (i = 0; i < ALTR_TRIGGER_READ_WRD_CNT; i++)
+		if (READ_ONCE(ptemp[i]) != i)
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "Read doesn't match written data\n");
+
+	if (priv->free_mem)
+		priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr);
+
+	return count;
+}
+
+static const struct file_operations altr_edac_device_inject_fops __maybe_unused = {
+	.open = simple_open,
+	.write = altr_edac_device_trig,
+	.llseek = generic_file_llseek,
+};
+
+static ssize_t __maybe_unused
+altr_edac_a10_device_trig(struct file *file, const char __user *user_buf,
+			  size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops __maybe_unused = {
+	.open = simple_open,
+	.write = altr_edac_a10_device_trig,
+	.llseek = generic_file_llseek,
+};
+
+static ssize_t __maybe_unused
+altr_edac_a10_device_trig2(struct file *file, const char __user *user_buf,
+			   size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject2_fops __maybe_unused = {
+	.open = simple_open,
+	.write = altr_edac_a10_device_trig2,
+	.llseek = generic_file_llseek,
+};
+
+static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
+				      const struct edac_device_prv_data *priv)
+{
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	drvdata->debugfs_dir = edac_debugfs_create_dir(drvdata->edac_dev_name);
+	if (!drvdata->debugfs_dir)
+		return;
+
+	if (!edac_debugfs_create_file("altr_trigger", S_IWUSR,
+				      drvdata->debugfs_dir, edac_dci,
+				      priv->inject_fops))
+		debugfs_remove_recursive(drvdata->debugfs_dir);
+}
+
+static const struct of_device_id altr_edac_device_of_match[] = {
+#ifdef CONFIG_EDAC_ALTERA_L2C
+	{ .compatible = "altr,socfpga-l2-ecc", .data = &l2ecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+	{ .compatible = "altr,socfpga-ocram-ecc", .data = &ocramecc_data },
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_device_of_match);
+
+/*
+ * altr_edac_device_probe()
+ *	This is a generic EDAC device driver that will support
+ *	various Altera memory devices such as the L2 cache ECC and
+ *	OCRAM ECC as well as the memories for other peripherals.
+ *	Module specific initialization is done by passing the
+ *	function index in the device tree.
+ */
+static int altr_edac_device_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci;
+	struct altr_edac_device_dev *drvdata;
+	struct resource *r;
+	int res = 0;
+	struct device_node *np = pdev->dev.of_node;
+	char *ecc_name = (char *)np->name;
+	static int dev_instance;
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to open devm\n");
+		return -ENOMEM;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get mem resource\n");
+		res = -ENODEV;
+		goto fail;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
+				     dev_name(&pdev->dev))) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s:Error requesting mem region\n", ecc_name);
+		res = -EBUSY;
+		goto fail;
+	}
+
+	dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
+					 1, ecc_name, 1, 0, NULL, 0,
+					 dev_instance++);
+
+	if (!dci) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: Unable to allocate EDAC device\n", ecc_name);
+		res = -ENOMEM;
+		goto fail;
+	}
+
+	drvdata = dci->pvt_info;
+	dci->dev = &pdev->dev;
+	platform_set_drvdata(pdev, dci);
+	drvdata->edac_dev_name = ecc_name;
+
+	drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!drvdata->base) {
+		res = -ENOMEM;
+		goto fail1;
+	}
+
+	/* Get driver specific data for this EDAC device */
+	drvdata->data = of_match_node(altr_edac_device_of_match, np)->data;
+
+	/* Check specific dependencies for the module */
+	if (drvdata->data->setup) {
+		res = drvdata->data->setup(drvdata);
+		if (res)
+			goto fail1;
+	}
+
+	drvdata->sb_irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
+			       altr_edac_device_handler,
+			       0, dev_name(&pdev->dev), dci);
+	if (res)
+		goto fail1;
+
+	drvdata->db_irq = platform_get_irq(pdev, 1);
+	res = devm_request_irq(&pdev->dev, drvdata->db_irq,
+			       altr_edac_device_handler,
+			       0, dev_name(&pdev->dev), dci);
+	if (res)
+		goto fail1;
+
+	dci->mod_name = "Altera ECC Manager";
+	dci->dev_name = drvdata->edac_dev_name;
+
+	res = edac_device_add_device(dci);
+	if (res)
+		goto fail1;
+
+	altr_create_edacdev_dbgfs(dci, drvdata->data);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+
+fail1:
+	edac_device_free_ctl_info(dci);
+fail:
+	devres_release_group(&pdev->dev, NULL);
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s:Error setting up EDAC device: %d\n", ecc_name, res);
+
+	return res;
+}
+
+static int altr_edac_device_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
+	struct altr_edac_device_dev *drvdata = dci->pvt_info;
+
+	debugfs_remove_recursive(drvdata->debugfs_dir);
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(dci);
+
+	return 0;
+}
+
+static struct platform_driver altr_edac_device_driver = {
+	.probe =  altr_edac_device_probe,
+	.remove = altr_edac_device_remove,
+	.driver = {
+		.name = "altr_edac_device",
+		.of_match_table = altr_edac_device_of_match,
+	},
+};
+module_platform_driver(altr_edac_device_driver);
+
+/******************* Arria10 Device ECC Shared Functions *****************/
+
+/*
+ *  Test for memory's ECC dependencies upon entry because platform specific
+ *  startup should have initialized the memory and enabled the ECC.
+ *  Can't turn on ECC here because accessing un-initialized memory will
+ *  cause CE/UE errors possibly causing an ABORT.
+ */
+static int __maybe_unused
+altr_check_ecc_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem  *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s: No ECC present or ECC disabled.\n",
+		    device->edac_dev_name);
+	return -ENODEV;
+}
+
+static irqreturn_t __maybe_unused altr_edac_a10_ecc_irq(int irq, void *dev_id)
+{
+	struct altr_edac_device_dev *dci = dev_id;
+	void __iomem  *base = dci->base;
+
+	if (irq == dci->sb_irq) {
+		writel(ALTR_A10_ECC_SERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+
+		return IRQ_HANDLED;
+	} else if (irq == dci->db_irq) {
+		writel(ALTR_A10_ECC_DERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		if (dci->data->panic)
+			panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+
+		return IRQ_HANDLED;
+	}
+
+	WARN_ON(1);
+
+	return IRQ_NONE;
+}
+
+/******************* Arria10 Memory Buffer Functions *********************/
+
+static inline int a10_get_irq_mask(struct device_node *np)
+{
+	int irq;
+	const u32 *handle = of_get_property(np, "interrupts", NULL);
+
+	if (!handle)
+		return -ENODEV;
+	irq = be32_to_cpup(handle);
+	return irq;
+}
+
+static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+	u32 init_mask, stat_mask, clear_mask;
+	int ret = 0;
+
+	if (port) {
+		init_mask = ALTR_A10_ECC_INITB;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+		clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+	} else {
+		init_mask = ALTR_A10_ECC_INITA;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+		clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+	}
+
+	ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(stat_mask,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		ret = -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return ret;
+}
+
+static __init int __maybe_unused
+altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			u32 ecc_ctrl_en_mask, bool dual_port)
+{
+	int ret = 0;
+	void __iomem *ecc_block_base;
+	struct regmap *ecc_mgr_map;
+	char *ecc_name;
+	struct device_node *np_eccmgr;
+
+	ecc_name = (char *)np->name;
+
+	/* Get the ECC Manager - parent of the device EDACs */
+	np_eccmgr = of_get_parent(np);
+
+	ecc_mgr_map =
+		altr_sysmgr_regmap_lookup_by_phandle(np_eccmgr,
+						     "altr,sysmgr-syscon");
+
+	of_node_put(np_eccmgr);
+	if (IS_ERR(ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return -ENODEV;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	if (!ecc_block_base) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to map %s ECC block\n", ecc_name);
+		return -ENODEV;
+	}
+
+	/* Disable ECC */
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+	writel(ALTR_A10_ECC_SERRINTEN,
+	       (ecc_block_base + ALTR_A10_ECC_ERRINTENR_OFST));
+	ecc_clear_bits(ecc_ctrl_en_mask,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	/* Ensure all writes complete */
+	wmb();
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base, 0);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "ECC: cannot init %s PORTA memory\n", ecc_name);
+		goto out;
+	}
+
+	if (dual_port) {
+		ret = altr_init_memory_port(ecc_block_base, 1);
+		if (ret) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "ECC: cannot init %s PORTB memory\n",
+				    ecc_name);
+			goto out;
+		}
+	}
+
+	/* Interrupt mode set to every SBERR */
+	regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
+		     ALTR_A10_ECC_INTMODE);
+	/* Enable ECC */
+	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+					ALTR_A10_ECC_CTRL_OFST));
+	writel(ALTR_A10_ECC_SERRINTEN,
+	       (ecc_block_base + ALTR_A10_ECC_ERRINTENS_OFST));
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+	/* Ensure all writes complete */
+	wmb();
+out:
+	iounmap(ecc_block_base);
+	return ret;
+}
+
+static int validate_parent_available(struct device_node *np);
+static const struct of_device_id altr_edac_a10_device_of_match[];
+static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
+{
+	int irq;
+	struct device_node *child, *np;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "altr,socfpga-a10-ecc-manager");
+	if (!np) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "ECC Manager not found\n");
+		return -ENODEV;
+	}
+
+	for_each_child_of_node(np, child) {
+		const struct of_device_id *pdev_id;
+		const struct edac_device_prv_data *prv;
+
+		if (!of_device_is_available(child))
+			continue;
+		if (!of_device_is_compatible(child, compat))
+			continue;
+
+		if (validate_parent_available(child))
+			continue;
+
+		irq = a10_get_irq_mask(child);
+		if (irq < 0)
+			continue;
+
+		/* Get matching node and check for valid result */
+		pdev_id = of_match_node(altr_edac_a10_device_of_match, child);
+		if (IS_ERR_OR_NULL(pdev_id))
+			continue;
+
+		/* Validate private data pointer before dereferencing */
+		prv = pdev_id->data;
+		if (!prv)
+			continue;
+
+		altr_init_a10_ecc_block(child, BIT(irq),
+					prv->ecc_enable_mask, 0);
+	}
+
+	of_node_put(np);
+	return 0;
+}
+
+/*********************** SDRAM EDAC Device Functions *********************/
+
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+
+/*
+ * A legacy U-Boot bug only enabled memory mapped access to the ECC Enable
+ * register if ECC is enabled. Linux checks the ECC Enable register to
+ * determine ECC status.
+ * Use an SMC call (which always works) to determine ECC enablement.
+ */
+static int altr_s10_sdram_check_ecc_deps(struct altr_edac_device_dev *device)
+{
+	const struct edac_device_prv_data *prv = device->data;
+	unsigned long sdram_ecc_addr;
+	struct arm_smccc_res result;
+	struct device_node *np;
+	phys_addr_t sdram_addr;
+	u32 read_reg;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl");
+	if (!np)
+		goto sdram_err;
+
+	sdram_addr = of_translate_address(np, of_get_address(np, 0,
+							     NULL, NULL));
+	of_node_put(np);
+	sdram_ecc_addr = (unsigned long)sdram_addr + prv->ecc_en_ofst;
+	arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sdram_ecc_addr,
+		      0, 0, 0, 0, 0, 0, &result);
+	read_reg = (unsigned int)result.a1;
+	ret = (int)result.a0;
+	if (!ret && (read_reg & prv->ecc_enable_mask))
+		return 0;
+
+sdram_err:
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s: No ECC present or ECC disabled.\n",
+		    device->edac_dev_name);
+	return -ENODEV;
+}
+
+static const struct edac_device_prv_data s10_sdramecc_data = {
+	.setup = altr_s10_sdram_check_ecc_deps,
+	.ce_clear_mask = ALTR_S10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_S10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_S10_ECC_EN,
+	.ecc_en_ofst = ALTR_S10_ECC_CTRL_SDRAM_OFST,
+	.ce_set_mask = ALTR_S10_ECC_TSERRA,
+	.ue_set_mask = ALTR_S10_ECC_TDERRA,
+	.set_err_ofst = ALTR_S10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+#endif /* CONFIG_EDAC_ALTERA_SDRAM */
+
+/*********************** OCRAM EDAC Device Functions *********************/
+
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+
+static void *ocram_alloc_mem(size_t size, void **other)
+{
+	struct device_node *np;
+	struct gen_pool *gp;
+	void *sram_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
+	if (!np)
+		return NULL;
+
+	gp = of_gen_pool_get(np, "iram", 0);
+	of_node_put(np);
+	if (!gp)
+		return NULL;
+
+	sram_addr = (void *)gen_pool_alloc(gp, size);
+	if (!sram_addr)
+		return NULL;
+
+	memset(sram_addr, 0, size);
+	/* Ensure data is written out */
+	wmb();
+
+	/* Remember this handle for freeing  later */
+	*other = gp;
+
+	return sram_addr;
+}
+
+static void ocram_free_mem(void *p, size_t size, void *other)
+{
+	gen_pool_free((struct gen_pool *)other, (unsigned long)p, size);
+}
+
+static const struct edac_device_prv_data ocramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
+	.ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
+	.alloc_mem = ocram_alloc_mem,
+	.free_mem = ocram_free_mem,
+	.ecc_enable_mask = ALTR_OCR_ECC_EN,
+	.ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
+	.ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
+	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
+	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
+	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
+};
+
+static int __maybe_unused
+altr_check_ocram_deps_init(struct altr_edac_device_dev *device)
+{
+	void __iomem  *base = device->base;
+	int ret;
+
+	ret = altr_check_ecc_deps(device);
+	if (ret)
+		return ret;
+
+	/* Verify OCRAM has been initialized */
+	if (!ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA,
+			   (base + ALTR_A10_ECC_INITSTAT_OFST)))
+		return -ENODEV;
+
+	/* Enable IRQ on Single Bit Error */
+	writel(ALTR_A10_ECC_SERRINTEN, (base + ALTR_A10_ECC_ERRINTENS_OFST));
+	/* Ensure all writes complete */
+	wmb();
+
+	return 0;
+}
+
+static const struct edac_device_prv_data a10_ocramecc_data = {
+	.setup = altr_check_ocram_deps_init,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+	.ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject2_fops,
+	/*
+	 * OCRAM panic on uncorrectable error because sleep/resume
+	 * functions and FPGA contents are stored in OCRAM. Prefer
+	 * a kernel panic over executing/loading corrupted data.
+	 */
+	.panic = true,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_OCRAM */
+
+/********************* L2 Cache EDAC Device Functions ********************/
+
+#ifdef CONFIG_EDAC_ALTERA_L2C
+
+static void *l2_alloc_mem(size_t size, void **other)
+{
+	struct device *dev = *other;
+	void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);
+
+	if (!ptemp)
+		return NULL;
+
+	/* Make sure everything is written out */
+	wmb();
+
+	/*
+	 * Clean all cache levels up to LoC (includes L2)
+	 * This ensures the corrupted data is written into
+	 * L2 cache for readback test (which causes ECC error).
+	 */
+	flush_cache_all();
+
+	return ptemp;
+}
+
+static void l2_free_mem(void *p, size_t size, void *other)
+{
+	struct device *dev = other;
+
+	if (dev && p)
+		devm_kfree(dev, p);
+}
+
+/*
+ * altr_l2_check_deps()
+ *	Test for L2 cache ECC dependencies upon entry because
+ *	platform specific startup should have initialized the L2
+ *	memory and enabled the ECC.
+ *	Bail if ECC is not enabled.
+ *	Note that L2 Cache Enable is forced at build time.
+ */
+static int altr_l2_check_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if ((readl(base) & prv->ecc_enable_mask) ==
+	     prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "L2: No ECC present, or ECC disabled\n");
+	return -ENODEV;
+}
+
+static irqreturn_t altr_edac_a10_l2_irq(int irq, void *dev_id)
+{
+	struct altr_edac_device_dev *dci = dev_id;
+
+	if (irq == dci->sb_irq) {
+		regmap_write(dci->edac->ecc_mgr_map,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_SB);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+
+		return IRQ_HANDLED;
+	} else if (irq == dci->db_irq) {
+		regmap_write(dci->edac->ecc_mgr_map,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_MB);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+
+		return IRQ_HANDLED;
+	}
+
+	WARN_ON(1);
+
+	return IRQ_NONE;
+}
+
+static const struct edac_device_prv_data l2ecc_data = {
+	.setup = altr_l2_check_deps,
+	.ce_clear_mask = 0,
+	.ue_clear_mask = 0,
+	.alloc_mem = l2_alloc_mem,
+	.free_mem = l2_free_mem,
+	.ecc_enable_mask = ALTR_L2_ECC_EN,
+	.ce_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJS),
+	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
+	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
+	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
+};
+
+static const struct edac_device_prv_data a10_l2ecc_data = {
+	.setup = altr_l2_check_deps,
+	.ce_clear_mask = ALTR_A10_L2_ECC_SERR_CLR,
+	.ue_clear_mask = ALTR_A10_L2_ECC_MERR_CLR,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_L2,
+	.alloc_mem = l2_alloc_mem,
+	.free_mem = l2_free_mem,
+	.ecc_enable_mask = ALTR_A10_L2_ECC_EN_CTL,
+	.ce_set_mask = ALTR_A10_L2_ECC_CE_INJ_MASK,
+	.ue_set_mask = ALTR_A10_L2_ECC_UE_INJ_MASK,
+	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
+	.ecc_irq_handler = altr_edac_a10_l2_irq,
+	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_L2C */
+
+/********************* Ethernet Device Functions ********************/
+
+#ifdef CONFIG_EDAC_ALTERA_ETHERNET
+
+static int __init socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev)
+{
+	int ret;
+
+	ret = altr_init_a10_ecc_device_type("altr,socfpga-eth-mac-ecc");
+	if (ret)
+		return ret;
+
+	return altr_check_ecc_deps(dev);
+}
+
+static const struct edac_device_prv_data a10_enetecc_data = {
+	.setup = socfpga_init_ethernet_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject2_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_ETHERNET */
+
+/********************** NAND Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_NAND
+
+static int __init socfpga_init_nand_ecc(struct altr_edac_device_dev *device)
+{
+	int ret;
+
+	ret = altr_init_a10_ecc_device_type("altr,socfpga-nand-ecc");
+	if (ret)
+		return ret;
+
+	return altr_check_ecc_deps(device);
+}
+
+static const struct edac_device_prv_data a10_nandecc_data = {
+	.setup = socfpga_init_nand_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_NAND */
+
+/********************** DMA Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_DMA
+
+static int __init socfpga_init_dma_ecc(struct altr_edac_device_dev *device)
+{
+	int ret;
+
+	ret = altr_init_a10_ecc_device_type("altr,socfpga-dma-ecc");
+	if (ret)
+		return ret;
+
+	return altr_check_ecc_deps(device);
+}
+
+static const struct edac_device_prv_data a10_dmaecc_data = {
+	.setup = socfpga_init_dma_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_DMA */
+
+/********************** USB Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_USB
+
+static int __init socfpga_init_usb_ecc(struct altr_edac_device_dev *device)
+{
+	int ret;
+
+	ret = altr_init_a10_ecc_device_type("altr,socfpga-usb-ecc");
+	if (ret)
+		return ret;
+
+	return altr_check_ecc_deps(device);
+}
+
+static const struct edac_device_prv_data a10_usbecc_data = {
+	.setup = socfpga_init_usb_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject2_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_USB */
+
+/********************** QSPI Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_QSPI
+
+static int __init socfpga_init_qspi_ecc(struct altr_edac_device_dev *device)
+{
+	int ret;
+
+	ret = altr_init_a10_ecc_device_type("altr,socfpga-qspi-ecc");
+	if (ret)
+		return ret;
+
+	return altr_check_ecc_deps(device);
+}
+
+static const struct edac_device_prv_data a10_qspiecc_data = {
+	.setup = socfpga_init_qspi_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_QSPI */
+
+/********************* SDMMC Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_SDMMC
+
+static const struct edac_device_prv_data a10_sdmmceccb_data;
+static int altr_portb_setup(struct altr_edac_device_dev *device)
+{
+	struct edac_device_ctl_info *dci;
+	struct altr_edac_device_dev *altdev;
+	char *ecc_name = "sdmmcb-ecc";
+	int edac_idx, rc;
+	struct device_node *np;
+	const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
+
+	rc = altr_check_ecc_deps(device);
+	if (rc)
+		return rc;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
+	if (!np) {
+		edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n");
+		return -ENODEV;
+	}
+
+	/* Create the PortB EDAC device */
+	edac_idx = edac_device_alloc_index();
+	dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1,
+					 ecc_name, 1, 0, NULL, 0, edac_idx);
+	if (!dci) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: Unable to allocate PortB EDAC device\n",
+			    ecc_name);
+		return -ENOMEM;
+	}
+
+	/* Initialize the PortB EDAC device structure from PortA structure */
+	altdev = dci->pvt_info;
+	*altdev = *device;
+
+	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
+		return -ENOMEM;
+
+	/* Update PortB specific values */
+	altdev->edac_dev_name = ecc_name;
+	altdev->edac_idx = edac_idx;
+	altdev->edac_dev = dci;
+	altdev->data = prv;
+	dci->dev = &altdev->ddev;
+	dci->ctl_name = "Altera ECC Manager";
+	dci->mod_name = ecc_name;
+	dci->dev_name = ecc_name;
+
+	/*
+	 * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
+	 *
+	 * FIXME: Instead of ifdefs with different architectures the driver
+	 *        should properly use compatibles.
+	 */
+#ifdef CONFIG_64BIT
+	altdev->sb_irq = irq_of_parse_and_map(np, 1);
+#else
+	altdev->sb_irq = irq_of_parse_and_map(np, 2);
+#endif
+	if (!altdev->sb_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
+		rc = -ENODEV;
+		goto err_release_group_1;
+	}
+	rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
+			      prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n");
+		goto err_release_group_1;
+	}
+
+#ifdef CONFIG_64BIT
+	/* Use IRQ to determine SError origin instead of assigning IRQ */
+	rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Error PortB DBIRQ alloc\n");
+		goto err_release_group_1;
+	}
+#else
+	altdev->db_irq = irq_of_parse_and_map(np, 3);
+	if (!altdev->db_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+		rc = -ENODEV;
+		goto err_release_group_1;
+	}
+	rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+			      prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+		goto err_release_group_1;
+	}
+#endif
+
+	rc = edac_device_add_device(dci);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "edac_device_add_device portB failed\n");
+		rc = -ENOMEM;
+		goto err_release_group_1;
+	}
+	altr_create_edacdev_dbgfs(dci, prv);
+
+	list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
+
+	devres_remove_group(&altdev->ddev, altr_portb_setup);
+
+	return 0;
+
+err_release_group_1:
+	edac_device_free_ctl_info(dci);
+	devres_release_group(&altdev->ddev, altr_portb_setup);
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
+	return rc;
+}
+
+static int __init socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device)
+{
+	int rc = -ENODEV;
+	struct device_node *child;
+
+	child = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
+	if (!child)
+		return -ENODEV;
+
+	if (!of_device_is_available(child))
+		goto exit;
+
+	if (validate_parent_available(child))
+		goto exit;
+
+	/* Init portB */
+	rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK,
+				     a10_sdmmceccb_data.ecc_enable_mask, 1);
+	if (rc)
+		goto exit;
+
+	/* Setup portB */
+	return altr_portb_setup(device);
+
+exit:
+	of_node_put(child);
+	return rc;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id)
+{
+	struct altr_edac_device_dev *ad = dev_id;
+	void __iomem  *base = ad->base;
+	const struct edac_device_prv_data *priv = ad->data;
+
+	if (irq == ad->sb_irq) {
+		writel(priv->ce_clear_mask,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name);
+		return IRQ_HANDLED;
+	} else if (irq == ad->db_irq) {
+		writel(priv->ue_clear_mask,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name);
+		return IRQ_HANDLED;
+	}
+
+	WARN_ONCE(1, "Unhandled IRQ%d on Port B.", irq);
+
+	return IRQ_NONE;
+}
+
+static const struct edac_device_prv_data a10_sdmmcecca_data = {
+	.setup = socfpga_init_sdmmc_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_set_mask = ALTR_A10_ECC_DERRPENA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static const struct edac_device_prv_data a10_sdmmceccb_data = {
+	.setup = socfpga_init_sdmmc_ecc,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENB,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENB,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRB,
+	.ue_set_mask = ALTR_A10_ECC_TDERRB,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq_portb,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_SDMMC */
+
+/********************* Arria10 EDAC Device Functions *************************/
+static const struct of_device_id altr_edac_a10_device_of_match[] = {
+#ifdef CONFIG_EDAC_ALTERA_L2C
+	{ .compatible = "altr,socfpga-a10-l2-ecc", .data = &a10_l2ecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+	{ .compatible = "altr,socfpga-a10-ocram-ecc",
+	  .data = &a10_ocramecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_ETHERNET
+	{ .compatible = "altr,socfpga-eth-mac-ecc",
+	  .data = &a10_enetecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_NAND
+	{ .compatible = "altr,socfpga-nand-ecc", .data = &a10_nandecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_DMA
+	{ .compatible = "altr,socfpga-dma-ecc", .data = &a10_dmaecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_USB
+	{ .compatible = "altr,socfpga-usb-ecc", .data = &a10_usbecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_QSPI
+	{ .compatible = "altr,socfpga-qspi-ecc", .data = &a10_qspiecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_SDMMC
+	{ .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+	{ .compatible = "altr,sdram-edac-s10", .data = &s10_sdramecc_data },
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match);
+
+/*
+ * The Arria10 EDAC Device Functions differ from the Cyclone5/Arria5
+ * because 2 IRQs are shared among the all ECC peripherals. The ECC
+ * manager manages the IRQs and the children.
+ * Based on xgene_edac.c peripheral code.
+ */
+
+static ssize_t __maybe_unused
+altr_edac_a10_device_trig(struct file *file, const char __user *user_buf,
+			  size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+	unsigned long flags;
+	u8 trig_type;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	local_irq_save(flags);
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		writel(priv->ue_set_mask, set_addr);
+	else
+		writel(priv->ce_set_mask, set_addr);
+
+	/* Ensure the interrupt test bits are set */
+	wmb();
+	local_irq_restore(flags);
+
+	return count;
+}
+
+/*
+ * The Stratix10 EDAC Error Injection Functions differ from Arria10
+ * slightly. A few Arria10 peripherals can use this injection function.
+ * Inject the error into the memory and then readback to trigger the IRQ.
+ */
+static ssize_t __maybe_unused
+altr_edac_a10_device_trig2(struct file *file, const char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+	unsigned long flags;
+	u8 trig_type;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	local_irq_save(flags);
+	if (trig_type == ALTR_UE_TRIGGER_CHAR) {
+		writel(priv->ue_set_mask, set_addr);
+	} else {
+		/* Setup read/write of 4 bytes */
+		writel(ECC_WORD_WRITE, drvdata->base + ECC_BLK_DBYTECTRL_OFST);
+		/* Setup Address to 0 */
+		writel(0, drvdata->base + ECC_BLK_ADDRESS_OFST);
+		/* Setup accctrl to read & ecc & data override */
+		writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
+		/* Kick it. */
+		writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
+		/* Setup write for single bit change */
+		writel(readl(drvdata->base + ECC_BLK_RDATA0_OFST) ^ 0x1,
+		       drvdata->base + ECC_BLK_WDATA0_OFST);
+		writel(readl(drvdata->base + ECC_BLK_RDATA1_OFST),
+		       drvdata->base + ECC_BLK_WDATA1_OFST);
+		writel(readl(drvdata->base + ECC_BLK_RDATA2_OFST),
+		       drvdata->base + ECC_BLK_WDATA2_OFST);
+		writel(readl(drvdata->base + ECC_BLK_RDATA3_OFST),
+		       drvdata->base + ECC_BLK_WDATA3_OFST);
+
+		/* Copy Read ECC to Write ECC */
+		writel(readl(drvdata->base + ECC_BLK_RECC0_OFST),
+		       drvdata->base + ECC_BLK_WECC0_OFST);
+		writel(readl(drvdata->base + ECC_BLK_RECC1_OFST),
+		       drvdata->base + ECC_BLK_WECC1_OFST);
+		/* Setup accctrl to write & ecc override & data override */
+		writel(ECC_WRITE_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
+		/* Kick it. */
+		writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
+		/* Setup accctrl to read & ecc overwrite & data overwrite */
+		writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
+		/* Kick it. */
+		writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
+	}
+
+	/* Ensure the interrupt test bits are set */
+	wmb();
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static void altr_edac_a10_irq_handler(struct irq_desc *desc)
+{
+	int dberr, bit, sm_offset, irq_status;
+	struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int irq = irq_desc_get_irq(desc);
+	unsigned long bits;
+
+	dberr = (irq == edac->db_irq) ? 1 : 0;
+	sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
+			    A10_SYSMGR_ECC_INTSTAT_SERR_OFST;
+
+	chained_irq_enter(chip, desc);
+
+	regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
+
+	bits = irq_status;
+	for_each_set_bit(bit, &bits, 32)
+		generic_handle_domain_irq(edac->domain, dberr * 32 + bit);
+
+	chained_irq_exit(chip, desc);
+}
+
+static int validate_parent_available(struct device_node *np)
+{
+	struct device_node *parent;
+	int ret = 0;
+
+	/* SDRAM must be present for Linux (implied parent) */
+	if (of_device_is_compatible(np, "altr,sdram-edac-s10"))
+		return 0;
+
+	/* Ensure parent device is enabled if parent node exists */
+	parent = of_parse_phandle(np, "altr,ecc-parent", 0);
+	if (parent && !of_device_is_available(parent))
+		ret = -ENODEV;
+
+	of_node_put(parent);
+	return ret;
+}
+
+static int get_s10_sdram_edac_resource(struct device_node *np,
+				       struct resource *res)
+{
+	struct device_node *parent;
+	int ret;
+
+	parent = of_parse_phandle(np, "altr,sdr-syscon", 0);
+	if (!parent)
+		return -ENODEV;
+
+	ret = of_address_to_resource(parent, 0, res);
+	of_node_put(parent);
+
+	return ret;
+}
+
+static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
+				    struct device_node *np)
+{
+	struct edac_device_ctl_info *dci;
+	struct altr_edac_device_dev *altdev;
+	char *ecc_name = (char *)np->name;
+	struct resource res;
+	int edac_idx;
+	int rc = 0;
+	const struct edac_device_prv_data *prv;
+	/* Get matching node and check for valid result */
+	const struct of_device_id *pdev_id =
+		of_match_node(altr_edac_a10_device_of_match, np);
+	if (IS_ERR_OR_NULL(pdev_id))
+		return -ENODEV;
+
+	/* Get driver specific data for this EDAC device */
+	prv = pdev_id->data;
+	if (IS_ERR_OR_NULL(prv))
+		return -ENODEV;
+
+	if (validate_parent_available(np))
+		return -ENODEV;
+
+	if (!devres_open_group(edac->dev, altr_edac_a10_device_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	if (of_device_is_compatible(np, "altr,sdram-edac-s10"))
+		rc = get_s10_sdram_edac_resource(np, &res);
+	else
+		rc = of_address_to_resource(np, 0, &res);
+
+	if (rc < 0) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: no resource address\n", ecc_name);
+		goto err_release_group;
+	}
+
+	edac_idx = edac_device_alloc_index();
+	dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name,
+					 1, ecc_name, 1, 0, NULL, 0,
+					 edac_idx);
+
+	if (!dci) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: Unable to allocate EDAC device\n", ecc_name);
+		rc = -ENOMEM;
+		goto err_release_group;
+	}
+
+	altdev = dci->pvt_info;
+	dci->dev = edac->dev;
+	altdev->edac_dev_name = ecc_name;
+	altdev->edac_idx = edac_idx;
+	altdev->edac = edac;
+	altdev->edac_dev = dci;
+	altdev->data = prv;
+	altdev->ddev = *edac->dev;
+	dci->dev = &altdev->ddev;
+	dci->ctl_name = "Altera ECC Manager";
+	dci->mod_name = ecc_name;
+	dci->dev_name = ecc_name;
+
+	altdev->base = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(altdev->base)) {
+		rc = PTR_ERR(altdev->base);
+		goto err_release_group1;
+	}
+
+	/* Check specific dependencies for the module */
+	if (altdev->data->setup) {
+		rc = altdev->data->setup(altdev);
+		if (rc)
+			goto err_release_group1;
+	}
+
+	altdev->sb_irq = irq_of_parse_and_map(np, 0);
+	if (!altdev->sb_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating SBIRQ\n");
+		rc = -ENODEV;
+		goto err_release_group1;
+	}
+	rc = devm_request_irq(edac->dev, altdev->sb_irq, prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "No SBERR IRQ resource\n");
+		goto err_release_group1;
+	}
+
+#ifdef CONFIG_64BIT
+	/* Use IRQ to determine SError origin instead of assigning IRQ */
+	rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to parse DB IRQ index\n");
+		goto err_release_group1;
+	}
+#else
+	altdev->db_irq = irq_of_parse_and_map(np, 1);
+	if (!altdev->db_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
+		rc = -ENODEV;
+		goto err_release_group1;
+	}
+	rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
+		goto err_release_group1;
+	}
+#endif
+
+	rc = edac_device_add_device(dci);
+	if (rc) {
+		dev_err(edac->dev, "edac_device_add_device failed\n");
+		rc = -ENOMEM;
+		goto err_release_group1;
+	}
+
+	altr_create_edacdev_dbgfs(dci, prv);
+
+	list_add(&altdev->next, &edac->a10_ecc_devices);
+
+	devres_remove_group(edac->dev, altr_edac_a10_device_add);
+
+	return 0;
+
+err_release_group1:
+	edac_device_free_ctl_info(dci);
+err_release_group:
+	devres_release_group(edac->dev, NULL);
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
+
+	return rc;
+}
+
+static void a10_eccmgr_irq_mask(struct irq_data *d)
+{
+	struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);
+
+	regmap_write(edac->ecc_mgr_map,	A10_SYSMGR_ECC_INTMASK_SET_OFST,
+		     BIT(d->hwirq));
+}
+
+static void a10_eccmgr_irq_unmask(struct irq_data *d)
+{
+	struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);
+
+	regmap_write(edac->ecc_mgr_map,	A10_SYSMGR_ECC_INTMASK_CLR_OFST,
+		     BIT(d->hwirq));
+}
+
+static int a10_eccmgr_irqdomain_map(struct irq_domain *d, unsigned int irq,
+				    irq_hw_number_t hwirq)
+{
+	struct altr_arria10_edac *edac = d->host_data;
+
+	irq_set_chip_and_handler(irq, &edac->irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, edac);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops a10_eccmgr_ic_ops = {
+	.map = a10_eccmgr_irqdomain_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+/************** Stratix 10 EDAC Double Bit Error Handler ************/
+#define to_a10edac(p, m) container_of(p, struct altr_arria10_edac, m)
+
+#ifdef CONFIG_64BIT
+/* panic routine issues reboot on non-zero panic_timeout */
+extern int panic_timeout;
+
+/*
+ * The double bit error is handled through SError which is fatal. This is
+ * called as a panic notifier to printout ECC error info as part of the panic.
+ */
+static int s10_edac_dberr_handler(struct notifier_block *this,
+				  unsigned long event, void *ptr)
+{
+	struct altr_arria10_edac *edac = to_a10edac(this, panic_notifier);
+	int err_addr, dberror;
+
+	regmap_read(edac->ecc_mgr_map, S10_SYSMGR_ECC_INTSTAT_DERR_OFST,
+		    &dberror);
+	regmap_write(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST, dberror);
+	if (dberror & S10_DBE_IRQ_MASK) {
+		struct list_head *position;
+		struct altr_edac_device_dev *ed;
+		struct arm_smccc_res result;
+
+		/* Find the matching DBE in the list of devices */
+		list_for_each(position, &edac->a10_ecc_devices) {
+			ed = list_entry(position, struct altr_edac_device_dev,
+					next);
+			if (!(BIT(ed->db_irq) & dberror))
+				continue;
+
+			writel(ALTR_A10_ECC_DERRPENA,
+			       ed->base + ALTR_A10_ECC_INTSTAT_OFST);
+			err_addr = readl(ed->base + ALTR_S10_DERR_ADDRA_OFST);
+			regmap_write(edac->ecc_mgr_map,
+				     S10_SYSMGR_UE_ADDR_OFST, err_addr);
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "EDAC: [Fatal DBE on %s @ 0x%08X]\n",
+				    ed->edac_dev_name, err_addr);
+			break;
+		}
+		/* Notify the System through SMC. Reboot delay = 1 second */
+		panic_timeout = 1;
+		arm_smccc_smc(INTEL_SIP_SMC_ECC_DBE, dberror, 0, 0, 0, 0,
+			      0, 0, &result);
+	}
+
+	return NOTIFY_DONE;
+}
+#endif
+
+/****************** Arria 10 EDAC Probe Function *********************/
+static int altr_edac_a10_probe(struct platform_device *pdev)
+{
+	struct altr_arria10_edac *edac;
+	struct device_node *child;
+
+	edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
+	if (!edac)
+		return -ENOMEM;
+
+	edac->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac);
+	INIT_LIST_HEAD(&edac->a10_ecc_devices);
+
+	edac->ecc_mgr_map =
+		altr_sysmgr_regmap_lookup_by_phandle(pdev->dev.of_node,
+						     "altr,sysmgr-syscon");
+
+	if (IS_ERR(edac->ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return PTR_ERR(edac->ecc_mgr_map);
+	}
+
+	edac->irq_chip.name = pdev->dev.of_node->name;
+	edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
+	edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;
+	edac->domain = irq_domain_add_linear(pdev->dev.of_node, 64,
+					     &a10_eccmgr_ic_ops, edac);
+	if (!edac->domain) {
+		dev_err(&pdev->dev, "Error adding IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	edac->sb_irq = platform_get_irq(pdev, 0);
+	if (edac->sb_irq < 0) {
+		dev_err(&pdev->dev, "No SBERR IRQ resource\n");
+		return edac->sb_irq;
+	}
+
+	irq_set_chained_handler_and_data(edac->sb_irq,
+					 altr_edac_a10_irq_handler,
+					 edac);
+
+#ifdef CONFIG_64BIT
+	{
+		int dberror, err_addr;
+
+		edac->panic_notifier.notifier_call = s10_edac_dberr_handler;
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &edac->panic_notifier);
+
+		/* Printout a message if uncorrectable error previously. */
+		regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST,
+			    &dberror);
+		if (dberror) {
+			regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST,
+				    &err_addr);
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "Previous Boot UE detected[0x%X] @ 0x%X\n",
+				    dberror, err_addr);
+			/* Reset the sticky registers */
+			regmap_write(edac->ecc_mgr_map,
+				     S10_SYSMGR_UE_VAL_OFST, 0);
+			regmap_write(edac->ecc_mgr_map,
+				     S10_SYSMGR_UE_ADDR_OFST, 0);
+		}
+	}
+#else
+	edac->db_irq = platform_get_irq(pdev, 1);
+	if (edac->db_irq < 0) {
+		dev_err(&pdev->dev, "No DBERR IRQ resource\n");
+		return edac->db_irq;
+	}
+	irq_set_chained_handler_and_data(edac->db_irq,
+					 altr_edac_a10_irq_handler, edac);
+#endif
+
+	for_each_child_of_node(pdev->dev.of_node, child) {
+		if (!of_device_is_available(child))
+			continue;
+
+		if (of_match_node(altr_edac_a10_device_of_match, child))
+			altr_edac_a10_device_add(edac, child);
+
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+		else if (of_device_is_compatible(child, "altr,sdram-edac-a10"))
+			of_platform_populate(pdev->dev.of_node,
+					     altr_sdram_ctrl_of_match,
+					     NULL, &pdev->dev);
+#endif
+	}
+
+	return 0;
+}
+
+static const struct of_device_id altr_edac_a10_of_match[] = {
+	{ .compatible = "altr,socfpga-a10-ecc-manager" },
+	{ .compatible = "altr,socfpga-s10-ecc-manager" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match);
+
+static struct platform_driver altr_edac_a10_driver = {
+	.probe =  altr_edac_a10_probe,
+	.driver = {
+		.name = "socfpga_a10_ecc_manager",
+		.of_match_table = altr_edac_a10_of_match,
+	},
+};
+module_platform_driver(altr_edac_a10_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer");
+MODULE_DESCRIPTION("EDAC Driver for Altera Memories");