Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 393 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
new file mode 100644
index 000000000..12baf9ba0
--- /dev/null
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -0,0 +1,393 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_BRIDGE
+	def_bool y
+	depends on DRM
+	help
+	  Bridge registration and lookup framework.
+
+config DRM_PANEL_BRIDGE
+	def_bool y
+	depends on DRM_BRIDGE
+	select DRM_PANEL
+	help
+	  DRM bridge wrapper of DRM panels
+
+menu "Display Interface Bridges"
+	depends on DRM && DRM_BRIDGE
+
+config DRM_CDNS_DSI
+	tristate "Cadence DPI/DSI bridge"
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select GENERIC_PHY_MIPI_DPHY
+	depends on OF
+	help
+	  Support Cadence DPI to DSI bridge. This is an internal
+	  bridge and is meant to be directly embedded in a SoC.
+
+config DRM_CHIPONE_ICN6211
+	tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select REGMAP_I2C
+	help
+	  ICN6211 is MIPI-DSI/RGB Converter bridge from chipone.
+
+	  It has a flexible configuration of MIPI DSI signal input
+	  and produce RGB565, RGB666, RGB888 output format.
+
+	  If in doubt, say "N".
+
+config DRM_CHRONTEL_CH7033
+	tristate "Chrontel CH7033 Video Encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as
+	  found in the Dell Wyse 3020 thin client.
+
+	  If in doubt, say "N".
+
+config DRM_CROS_EC_ANX7688
+	tristate "ChromeOS EC ANX7688 bridge"
+	depends on OF
+	depends on I2C_CROS_EC_TUNNEL || COMPILE_TEST
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  ChromeOS EC ANX7688 is an ultra-low power
+	  4K Ultra-HD (4096x2160p60) mobile HD transmitter
+	  designed for ChromeOS devices. It converts HDMI
+	  2.0 to DisplayPort 1.3 Ultra-HD. It is connected
+	  to the ChromeOS Embedded Controller.
+
+config DRM_DISPLAY_CONNECTOR
+	tristate "Display connector support"
+	depends on OF
+	help
+	  Driver for display connectors with support for DDC and hot-plug
+	  detection. Most display controllers handle display connectors
+	  internally and don't need this driver, but the DRM subsystem is
+	  moving towards separating connector handling from display controllers
+	  on ARM-based platforms. Saying Y here when this driver is not needed
+	  will not cause any issue.
+
+config DRM_FSL_LDB
+	tristate "Freescale i.MX8MP LDB bridge"
+	depends on OF
+	depends on ARCH_MXC || COMPILE_TEST
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Support for i.MX8MP DPI-to-LVDS on-SoC encoder.
+
+config DRM_ITE_IT6505
+        tristate "ITE IT6505 DisplayPort bridge"
+        depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HDCP_HELPER
+	select DRM_DISPLAY_HELPER
+        select DRM_DP_AUX_BUS
+        select DRM_KMS_HELPER
+        select DRM_DP_HELPER
+        select EXTCON
+        select CRYPTO
+        select CRYPTO_HASH
+        help
+          ITE IT6505 DisplayPort bridge chip driver.
+
+config DRM_LONTIUM_LT8912B
+	tristate "Lontium LT8912B DSI/HDMI bridge"
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	select VIDEOMODE_HELPERS
+	help
+	  Driver for Lontium LT8912B DSI to HDMI bridge
+	  chip driver.
+	  Please say Y if you have such hardware.
+
+	  Say M here if you want to support this hardware as a module.
+	  The module will be named "lontium-lt8912b".
+
+config DRM_LONTIUM_LT9211
+	tristate "Lontium LT9211 DSI/LVDS/DPI bridge"
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	help
+	  Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI
+	  input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge
+	  chip.
+	  Please say Y if you have such hardware.
+
+config DRM_LONTIUM_LT9611
+	tristate "Lontium LT9611 DSI/HDMI bridge"
+	select SND_SOC_HDMI_CODEC if SND_SOC
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	help
+	  Driver for Lontium LT9611 DSI to HDMI bridge
+	  chip driver that converts dual DSI and I2S to
+	  HDMI signals
+	  Please say Y if you have such hardware.
+
+config DRM_LONTIUM_LT9611UXC
+	tristate "Lontium LT9611UXC DSI/HDMI bridge"
+	select SND_SOC_HDMI_CODEC if SND_SOC
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	help
+	  Driver for Lontium LT9611UXC DSI to HDMI bridge
+	  chip driver that converts dual DSI and I2S to
+	  HDMI signals
+	  Please say Y if you have such hardware.
+
+config DRM_ITE_IT66121
+	tristate "ITE IT66121 HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  Support for ITE IT66121 HDMI bridge.
+
+config DRM_LVDS_CODEC
+	tristate "Transparent LVDS encoders and decoders support"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Support for transparent LVDS encoders and decoders that don't
+	  require any configuration.
+
+config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
+	tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  This is a driver for the display bridges of
+	  GE B850v3 that convert dual channel LVDS
+	  to DP++. This is used with the i.MX6 imx-ldb
+	  driver. You are likely to say N here.
+
+config DRM_NWL_MIPI_DSI
+	tristate "Northwest Logic MIPI DSI Host controller"
+	depends on DRM
+	depends on COMMON_CLK
+	depends on OF && HAS_IOMEM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select GENERIC_PHY_MIPI_DPHY
+	select MFD_SYSCON
+	select MULTIPLEXER
+	select REGMAP_MMIO
+	help
+	  This enables the Northwest Logic MIPI DSI Host controller as
+	  for example found on NXP's i.MX8 Processors.
+
+config DRM_NXP_PTN3460
+	tristate "NXP PTN3460 DP/LVDS bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  NXP PTN3460 eDP-LVDS bridge chip driver.
+
+config DRM_PARADE_PS8622
+	tristate "Parade eDP/LVDS bridge"
+	depends on OF
+	select DRM_PANEL
+	select DRM_KMS_HELPER
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  Parade eDP-LVDS bridge chip driver.
+
+config DRM_PARADE_PS8640
+	tristate "Parade PS8640 MIPI DSI to eDP Converter"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	help
+	  Choose this option if you have PS8640 for display
+	  The PS8640 is a high-performance and low-power
+	  MIPI DSI to eDP converter
+
+config DRM_SIL_SII8620
+	tristate "Silicon Image SII8620 HDMI/MHL bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select EXTCON
+	depends on RC_CORE || !RC_CORE
+	help
+	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
+
+config DRM_SII902X
+	tristate "Silicon Image sii902x RGB/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select I2C_MUX
+	select SND_SOC_HDMI_CODEC if SND_SOC
+	help
+	  Silicon Image sii902x bridge chip driver.
+
+config DRM_SII9234
+	tristate "Silicon Image SII9234 HDMI/MHL bridge"
+	depends on OF
+	help
+	  Say Y here if you want support for the MHL interface.
+	  It is an I2C driver, that detects connection of MHL bridge
+	  and starts encapsulation of HDMI signal.
+
+config DRM_SIMPLE_BRIDGE
+	tristate "Simple DRM bridge support"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Support for non-programmable DRM bridges, such as ADI ADV7123, TI
+	  THS8134 and THS8135 or passive resistor ladder DACs.
+
+config DRM_THINE_THC63LVD1024
+	tristate "Thine THC63LVD1024 LVDS decoder bridge"
+	depends on OF
+	help
+	  Thine THC63LVD1024 LVDS/parallel converter driver.
+
+config DRM_TOSHIBA_TC358762
+	tristate "TC358762 DSI/DPI bridge"
+	depends on OF
+	select DRM_MIPI_DSI
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Toshiba TC358762 DSI/DPI bridge driver.
+
+config DRM_TOSHIBA_TC358764
+	tristate "TC358764 DSI/LVDS bridge"
+	depends on OF
+	select DRM_MIPI_DSI
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  Toshiba TC358764 DSI/LVDS bridge driver.
+
+config DRM_TOSHIBA_TC358767
+	tristate "Toshiba TC358767 eDP bridge"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	help
+	  Toshiba TC358767 eDP bridge chip driver.
+
+config DRM_TOSHIBA_TC358768
+	tristate "Toshiba TC358768 MIPI DSI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+	help
+	  Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver.
+
+config DRM_TOSHIBA_TC358775
+	tristate "Toshiba TC358775 DSI/LVDS bridge"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	help
+	  Toshiba TC358775 DSI/LVDS bridge chip driver.
+
+config DRM_TI_DLPC3433
+	tristate "TI DLPC3433 Display controller"
+	depends on DRM && DRM_PANEL
+	depends on OF
+	select DRM_MIPI_DSI
+	help
+	  TI DLPC3433 is a MIPI DSI based display controller bridge
+	  for processing high resolution DMD based projectors.
+
+	  It has a flexible configuration of MIPI DSI and DPI signal
+	  input that produces a DMD output in RGB565, RGB666, RGB888
+	  formats.
+
+	  It supports upto 720p resolution with 60 and 120 Hz refresh
+	  rates.
+
+config DRM_TI_TFP410
+	tristate "TI TFP410 DVI/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Texas Instruments TFP410 DVI/HDMI Transmitter driver
+
+config DRM_TI_SN65DSI83
+	tristate "TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	help
+	  Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver
+
+config DRM_TI_SN65DSI86
+	tristate "TI SN65DSI86 DSI to eDP bridge"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	select AUXILIARY_BUS
+	select DRM_DP_AUX_BUS
+	help
+	  Texas Instruments SN65DSI86 DSI to eDP Bridge driver
+
+config DRM_TI_TPD12S015
+	tristate "TI TPD12S015 HDMI level shifter and ESD protection"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Texas Instruments TPD12S015 HDMI level shifter and ESD protection
+	  driver.
+
+source "drivers/gpu/drm/bridge/analogix/Kconfig"
+
+source "drivers/gpu/drm/bridge/adv7511/Kconfig"
+
+source "drivers/gpu/drm/bridge/cadence/Kconfig"
+
+source "drivers/gpu/drm/bridge/imx/Kconfig"
+
+source "drivers/gpu/drm/bridge/synopsys/Kconfig"
+
+endmenu