summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/pmbus/pmbus.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/hwmon/pmbus/pmbus.h
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/hwmon/pmbus/pmbus.h')
-rw-r--r--drivers/hwmon/pmbus/pmbus.h511
1 files changed, 511 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
new file mode 100644
index 000000000..10fb17879
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -0,0 +1,511 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * pmbus.h - Common defines and structures for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ */
+
+#ifndef PMBUS_H
+#define PMBUS_H
+
+#include <linux/bitops.h>
+#include <linux/regulator/driver.h>
+
+/*
+ * Registers
+ */
+enum pmbus_regs {
+ PMBUS_PAGE = 0x00,
+ PMBUS_OPERATION = 0x01,
+ PMBUS_ON_OFF_CONFIG = 0x02,
+ PMBUS_CLEAR_FAULTS = 0x03,
+ PMBUS_PHASE = 0x04,
+
+ PMBUS_WRITE_PROTECT = 0x10,
+
+ PMBUS_CAPABILITY = 0x19,
+ PMBUS_QUERY = 0x1A,
+
+ PMBUS_VOUT_MODE = 0x20,
+ PMBUS_VOUT_COMMAND = 0x21,
+ PMBUS_VOUT_TRIM = 0x22,
+ PMBUS_VOUT_CAL_OFFSET = 0x23,
+ PMBUS_VOUT_MAX = 0x24,
+ PMBUS_VOUT_MARGIN_HIGH = 0x25,
+ PMBUS_VOUT_MARGIN_LOW = 0x26,
+ PMBUS_VOUT_TRANSITION_RATE = 0x27,
+ PMBUS_VOUT_DROOP = 0x28,
+ PMBUS_VOUT_SCALE_LOOP = 0x29,
+ PMBUS_VOUT_SCALE_MONITOR = 0x2A,
+
+ PMBUS_COEFFICIENTS = 0x30,
+ PMBUS_POUT_MAX = 0x31,
+
+ PMBUS_FAN_CONFIG_12 = 0x3A,
+ PMBUS_FAN_COMMAND_1 = 0x3B,
+ PMBUS_FAN_COMMAND_2 = 0x3C,
+ PMBUS_FAN_CONFIG_34 = 0x3D,
+ PMBUS_FAN_COMMAND_3 = 0x3E,
+ PMBUS_FAN_COMMAND_4 = 0x3F,
+
+ PMBUS_VOUT_OV_FAULT_LIMIT = 0x40,
+ PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41,
+ PMBUS_VOUT_OV_WARN_LIMIT = 0x42,
+ PMBUS_VOUT_UV_WARN_LIMIT = 0x43,
+ PMBUS_VOUT_UV_FAULT_LIMIT = 0x44,
+ PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45,
+ PMBUS_IOUT_OC_FAULT_LIMIT = 0x46,
+ PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47,
+ PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48,
+ PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49,
+ PMBUS_IOUT_OC_WARN_LIMIT = 0x4A,
+ PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B,
+ PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C,
+
+ PMBUS_OT_FAULT_LIMIT = 0x4F,
+ PMBUS_OT_FAULT_RESPONSE = 0x50,
+ PMBUS_OT_WARN_LIMIT = 0x51,
+ PMBUS_UT_WARN_LIMIT = 0x52,
+ PMBUS_UT_FAULT_LIMIT = 0x53,
+ PMBUS_UT_FAULT_RESPONSE = 0x54,
+ PMBUS_VIN_OV_FAULT_LIMIT = 0x55,
+ PMBUS_VIN_OV_FAULT_RESPONSE = 0x56,
+ PMBUS_VIN_OV_WARN_LIMIT = 0x57,
+ PMBUS_VIN_UV_WARN_LIMIT = 0x58,
+ PMBUS_VIN_UV_FAULT_LIMIT = 0x59,
+
+ PMBUS_IIN_OC_FAULT_LIMIT = 0x5B,
+ PMBUS_IIN_OC_WARN_LIMIT = 0x5D,
+
+ PMBUS_POUT_OP_FAULT_LIMIT = 0x68,
+ PMBUS_POUT_OP_WARN_LIMIT = 0x6A,
+ PMBUS_PIN_OP_WARN_LIMIT = 0x6B,
+
+ PMBUS_STATUS_BYTE = 0x78,
+ PMBUS_STATUS_WORD = 0x79,
+ PMBUS_STATUS_VOUT = 0x7A,
+ PMBUS_STATUS_IOUT = 0x7B,
+ PMBUS_STATUS_INPUT = 0x7C,
+ PMBUS_STATUS_TEMPERATURE = 0x7D,
+ PMBUS_STATUS_CML = 0x7E,
+ PMBUS_STATUS_OTHER = 0x7F,
+ PMBUS_STATUS_MFR_SPECIFIC = 0x80,
+ PMBUS_STATUS_FAN_12 = 0x81,
+ PMBUS_STATUS_FAN_34 = 0x82,
+
+ PMBUS_READ_VIN = 0x88,
+ PMBUS_READ_IIN = 0x89,
+ PMBUS_READ_VCAP = 0x8A,
+ PMBUS_READ_VOUT = 0x8B,
+ PMBUS_READ_IOUT = 0x8C,
+ PMBUS_READ_TEMPERATURE_1 = 0x8D,
+ PMBUS_READ_TEMPERATURE_2 = 0x8E,
+ PMBUS_READ_TEMPERATURE_3 = 0x8F,
+ PMBUS_READ_FAN_SPEED_1 = 0x90,
+ PMBUS_READ_FAN_SPEED_2 = 0x91,
+ PMBUS_READ_FAN_SPEED_3 = 0x92,
+ PMBUS_READ_FAN_SPEED_4 = 0x93,
+ PMBUS_READ_DUTY_CYCLE = 0x94,
+ PMBUS_READ_FREQUENCY = 0x95,
+ PMBUS_READ_POUT = 0x96,
+ PMBUS_READ_PIN = 0x97,
+
+ PMBUS_REVISION = 0x98,
+ PMBUS_MFR_ID = 0x99,
+ PMBUS_MFR_MODEL = 0x9A,
+ PMBUS_MFR_REVISION = 0x9B,
+ PMBUS_MFR_LOCATION = 0x9C,
+ PMBUS_MFR_DATE = 0x9D,
+ PMBUS_MFR_SERIAL = 0x9E,
+
+ PMBUS_MFR_VIN_MIN = 0xA0,
+ PMBUS_MFR_VIN_MAX = 0xA1,
+ PMBUS_MFR_IIN_MAX = 0xA2,
+ PMBUS_MFR_PIN_MAX = 0xA3,
+ PMBUS_MFR_VOUT_MIN = 0xA4,
+ PMBUS_MFR_VOUT_MAX = 0xA5,
+ PMBUS_MFR_IOUT_MAX = 0xA6,
+ PMBUS_MFR_POUT_MAX = 0xA7,
+
+ PMBUS_IC_DEVICE_ID = 0xAD,
+ PMBUS_IC_DEVICE_REV = 0xAE,
+
+ PMBUS_MFR_MAX_TEMP_1 = 0xC0,
+ PMBUS_MFR_MAX_TEMP_2 = 0xC1,
+ PMBUS_MFR_MAX_TEMP_3 = 0xC2,
+
+/*
+ * Virtual registers.
+ * Useful to support attributes which are not supported by standard PMBus
+ * registers but exist as manufacturer specific registers on individual chips.
+ * Must be mapped to real registers in device specific code.
+ *
+ * Semantics:
+ * Virtual registers are all word size.
+ * READ registers are read-only; writes are either ignored or return an error.
+ * RESET registers are read/write. Reading reset registers returns zero
+ * (used for detection), writing any value causes the associated history to be
+ * reset.
+ * Virtual registers have to be handled in device specific driver code. Chip
+ * driver code returns non-negative register values if a virtual register is
+ * supported, or a negative error code if not. The chip driver may return
+ * -ENODATA or any other error code in this case, though an error code other
+ * than -ENODATA is handled more efficiently and thus preferred. Either case,
+ * the calling PMBus core code will abort if the chip driver returns an error
+ * code when reading or writing virtual registers.
+ */
+ PMBUS_VIRT_BASE = 0x100,
+ PMBUS_VIRT_READ_TEMP_AVG,
+ PMBUS_VIRT_READ_TEMP_MIN,
+ PMBUS_VIRT_READ_TEMP_MAX,
+ PMBUS_VIRT_RESET_TEMP_HISTORY,
+ PMBUS_VIRT_READ_VIN_AVG,
+ PMBUS_VIRT_READ_VIN_MIN,
+ PMBUS_VIRT_READ_VIN_MAX,
+ PMBUS_VIRT_RESET_VIN_HISTORY,
+ PMBUS_VIRT_READ_IIN_AVG,
+ PMBUS_VIRT_READ_IIN_MIN,
+ PMBUS_VIRT_READ_IIN_MAX,
+ PMBUS_VIRT_RESET_IIN_HISTORY,
+ PMBUS_VIRT_READ_PIN_AVG,
+ PMBUS_VIRT_READ_PIN_MIN,
+ PMBUS_VIRT_READ_PIN_MAX,
+ PMBUS_VIRT_RESET_PIN_HISTORY,
+ PMBUS_VIRT_READ_POUT_AVG,
+ PMBUS_VIRT_READ_POUT_MIN,
+ PMBUS_VIRT_READ_POUT_MAX,
+ PMBUS_VIRT_RESET_POUT_HISTORY,
+ PMBUS_VIRT_READ_VOUT_AVG,
+ PMBUS_VIRT_READ_VOUT_MIN,
+ PMBUS_VIRT_READ_VOUT_MAX,
+ PMBUS_VIRT_RESET_VOUT_HISTORY,
+ PMBUS_VIRT_READ_IOUT_AVG,
+ PMBUS_VIRT_READ_IOUT_MIN,
+ PMBUS_VIRT_READ_IOUT_MAX,
+ PMBUS_VIRT_RESET_IOUT_HISTORY,
+ PMBUS_VIRT_READ_TEMP2_AVG,
+ PMBUS_VIRT_READ_TEMP2_MIN,
+ PMBUS_VIRT_READ_TEMP2_MAX,
+ PMBUS_VIRT_RESET_TEMP2_HISTORY,
+
+ PMBUS_VIRT_READ_VMON,
+ PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+ PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+ PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+ PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+ PMBUS_VIRT_STATUS_VMON,
+
+ /*
+ * RPM and PWM Fan control
+ *
+ * Drivers wanting to expose PWM control must define the behaviour of
+ * PMBUS_VIRT_PWM_[1-4] and PMBUS_VIRT_PWM_ENABLE_[1-4] in the
+ * {read,write}_word_data callback.
+ *
+ * pmbus core provides a default implementation for
+ * PMBUS_VIRT_FAN_TARGET_[1-4].
+ *
+ * TARGET, PWM and PWM_ENABLE members must be defined sequentially;
+ * pmbus core uses the difference between the provided register and
+ * it's _1 counterpart to calculate the FAN/PWM ID.
+ */
+ PMBUS_VIRT_FAN_TARGET_1,
+ PMBUS_VIRT_FAN_TARGET_2,
+ PMBUS_VIRT_FAN_TARGET_3,
+ PMBUS_VIRT_FAN_TARGET_4,
+ PMBUS_VIRT_PWM_1,
+ PMBUS_VIRT_PWM_2,
+ PMBUS_VIRT_PWM_3,
+ PMBUS_VIRT_PWM_4,
+ PMBUS_VIRT_PWM_ENABLE_1,
+ PMBUS_VIRT_PWM_ENABLE_2,
+ PMBUS_VIRT_PWM_ENABLE_3,
+ PMBUS_VIRT_PWM_ENABLE_4,
+
+ /* Samples for average
+ *
+ * Drivers wanting to expose functionality for changing the number of
+ * samples used for average values should implement support in
+ * {read,write}_word_data callback for either PMBUS_VIRT_SAMPLES if it
+ * applies to all types of measurements, or any number of specific
+ * PMBUS_VIRT_*_SAMPLES registers to allow for individual control.
+ */
+ PMBUS_VIRT_SAMPLES,
+ PMBUS_VIRT_IN_SAMPLES,
+ PMBUS_VIRT_CURR_SAMPLES,
+ PMBUS_VIRT_POWER_SAMPLES,
+ PMBUS_VIRT_TEMP_SAMPLES,
+};
+
+/*
+ * OPERATION
+ */
+#define PB_OPERATION_CONTROL_ON BIT(7)
+
+/*
+ * WRITE_PROTECT
+ */
+#define PB_WP_ALL BIT(7) /* all but WRITE_PROTECT */
+#define PB_WP_OP BIT(6) /* all but WP, OPERATION, PAGE */
+#define PB_WP_VOUT BIT(5) /* all but WP, OPERATION, PAGE, VOUT, ON_OFF */
+
+#define PB_WP_ANY (PB_WP_ALL | PB_WP_OP | PB_WP_VOUT)
+
+/*
+ * CAPABILITY
+ */
+#define PB_CAPABILITY_SMBALERT BIT(4)
+#define PB_CAPABILITY_ERROR_CHECK BIT(7)
+
+/*
+ * VOUT_MODE
+ */
+#define PB_VOUT_MODE_MODE_MASK 0xe0
+#define PB_VOUT_MODE_PARAM_MASK 0x1f
+
+#define PB_VOUT_MODE_LINEAR 0x00
+#define PB_VOUT_MODE_VID 0x20
+#define PB_VOUT_MODE_DIRECT 0x40
+
+/*
+ * Fan configuration
+ */
+#define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1))
+#define PB_FAN_2_RPM BIT(2)
+#define PB_FAN_2_INSTALLED BIT(3)
+#define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5))
+#define PB_FAN_1_RPM BIT(6)
+#define PB_FAN_1_INSTALLED BIT(7)
+
+enum pmbus_fan_mode { percent = 0, rpm };
+
+/*
+ * STATUS_BYTE, STATUS_WORD (lower)
+ */
+#define PB_STATUS_NONE_ABOVE BIT(0)
+#define PB_STATUS_CML BIT(1)
+#define PB_STATUS_TEMPERATURE BIT(2)
+#define PB_STATUS_VIN_UV BIT(3)
+#define PB_STATUS_IOUT_OC BIT(4)
+#define PB_STATUS_VOUT_OV BIT(5)
+#define PB_STATUS_OFF BIT(6)
+#define PB_STATUS_BUSY BIT(7)
+
+/*
+ * STATUS_WORD (upper)
+ */
+#define PB_STATUS_UNKNOWN BIT(8)
+#define PB_STATUS_OTHER BIT(9)
+#define PB_STATUS_FANS BIT(10)
+#define PB_STATUS_POWER_GOOD_N BIT(11)
+#define PB_STATUS_WORD_MFR BIT(12)
+#define PB_STATUS_INPUT BIT(13)
+#define PB_STATUS_IOUT_POUT BIT(14)
+#define PB_STATUS_VOUT BIT(15)
+
+/*
+ * STATUS_IOUT
+ */
+#define PB_POUT_OP_WARNING BIT(0)
+#define PB_POUT_OP_FAULT BIT(1)
+#define PB_POWER_LIMITING BIT(2)
+#define PB_CURRENT_SHARE_FAULT BIT(3)
+#define PB_IOUT_UC_FAULT BIT(4)
+#define PB_IOUT_OC_WARNING BIT(5)
+#define PB_IOUT_OC_LV_FAULT BIT(6)
+#define PB_IOUT_OC_FAULT BIT(7)
+
+/*
+ * STATUS_VOUT, STATUS_INPUT
+ */
+#define PB_VOLTAGE_VIN_OFF BIT(3)
+#define PB_VOLTAGE_UV_FAULT BIT(4)
+#define PB_VOLTAGE_UV_WARNING BIT(5)
+#define PB_VOLTAGE_OV_WARNING BIT(6)
+#define PB_VOLTAGE_OV_FAULT BIT(7)
+
+/*
+ * STATUS_INPUT
+ */
+#define PB_PIN_OP_WARNING BIT(0)
+#define PB_IIN_OC_WARNING BIT(1)
+#define PB_IIN_OC_FAULT BIT(2)
+
+/*
+ * STATUS_TEMPERATURE
+ */
+#define PB_TEMP_UT_FAULT BIT(4)
+#define PB_TEMP_UT_WARNING BIT(5)
+#define PB_TEMP_OT_WARNING BIT(6)
+#define PB_TEMP_OT_FAULT BIT(7)
+
+/*
+ * STATUS_FAN
+ */
+#define PB_FAN_AIRFLOW_WARNING BIT(0)
+#define PB_FAN_AIRFLOW_FAULT BIT(1)
+#define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2)
+#define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3)
+#define PB_FAN_FAN2_WARNING BIT(4)
+#define PB_FAN_FAN1_WARNING BIT(5)
+#define PB_FAN_FAN2_FAULT BIT(6)
+#define PB_FAN_FAN1_FAULT BIT(7)
+
+/*
+ * CML_FAULT_STATUS
+ */
+#define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0)
+#define PB_CML_FAULT_OTHER_COMM BIT(1)
+#define PB_CML_FAULT_PROCESSOR BIT(3)
+#define PB_CML_FAULT_MEMORY BIT(4)
+#define PB_CML_FAULT_PACKET_ERROR BIT(5)
+#define PB_CML_FAULT_INVALID_DATA BIT(6)
+#define PB_CML_FAULT_INVALID_COMMAND BIT(7)
+
+enum pmbus_sensor_classes {
+ PSC_VOLTAGE_IN = 0,
+ PSC_VOLTAGE_OUT,
+ PSC_CURRENT_IN,
+ PSC_CURRENT_OUT,
+ PSC_POWER,
+ PSC_TEMPERATURE,
+ PSC_FAN,
+ PSC_PWM,
+ PSC_NUM_CLASSES /* Number of power sensor classes */
+};
+
+#define PMBUS_PAGES 32 /* Per PMBus specification */
+#define PMBUS_PHASES 10 /* Maximum number of phases per page */
+
+/* Functionality bit mask */
+#define PMBUS_HAVE_VIN BIT(0)
+#define PMBUS_HAVE_VCAP BIT(1)
+#define PMBUS_HAVE_VOUT BIT(2)
+#define PMBUS_HAVE_IIN BIT(3)
+#define PMBUS_HAVE_IOUT BIT(4)
+#define PMBUS_HAVE_PIN BIT(5)
+#define PMBUS_HAVE_POUT BIT(6)
+#define PMBUS_HAVE_FAN12 BIT(7)
+#define PMBUS_HAVE_FAN34 BIT(8)
+#define PMBUS_HAVE_TEMP BIT(9)
+#define PMBUS_HAVE_TEMP2 BIT(10)
+#define PMBUS_HAVE_TEMP3 BIT(11)
+#define PMBUS_HAVE_STATUS_VOUT BIT(12)
+#define PMBUS_HAVE_STATUS_IOUT BIT(13)
+#define PMBUS_HAVE_STATUS_INPUT BIT(14)
+#define PMBUS_HAVE_STATUS_TEMP BIT(15)
+#define PMBUS_HAVE_STATUS_FAN12 BIT(16)
+#define PMBUS_HAVE_STATUS_FAN34 BIT(17)
+#define PMBUS_HAVE_VMON BIT(18)
+#define PMBUS_HAVE_STATUS_VMON BIT(19)
+#define PMBUS_HAVE_PWM12 BIT(20)
+#define PMBUS_HAVE_PWM34 BIT(21)
+#define PMBUS_HAVE_SAMPLES BIT(22)
+
+#define PMBUS_PHASE_VIRTUAL BIT(30) /* Phases on this page are virtual */
+#define PMBUS_PAGE_VIRTUAL BIT(31) /* Page is virtual */
+
+enum pmbus_data_format { linear = 0, ieee754, direct, vid };
+enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
+
+struct pmbus_driver_info {
+ int pages; /* Total number of pages */
+ u8 phases[PMBUS_PAGES]; /* Number of phases per page */
+ enum pmbus_data_format format[PSC_NUM_CLASSES];
+ enum vrm_version vrm_version[PMBUS_PAGES]; /* vrm version per page */
+ /*
+ * Support one set of coefficients for each sensor type
+ * Used for chips providing data in direct mode.
+ */
+ int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */
+ int b[PSC_NUM_CLASSES]; /* offset */
+ int R[PSC_NUM_CLASSES]; /* exponent */
+
+ u32 func[PMBUS_PAGES]; /* Functionality, per page */
+ u32 pfunc[PMBUS_PHASES];/* Functionality, per phase */
+ /*
+ * The following functions map manufacturing specific register values
+ * to PMBus standard register values. Specify only if mapping is
+ * necessary.
+ * Functions return the register value (read) or zero (write) if
+ * successful. A return value of -ENODATA indicates that there is no
+ * manufacturer specific register, but that a standard PMBus register
+ * may exist. Any other negative return value indicates that the
+ * register does not exist, and that no attempt should be made to read
+ * the standard register.
+ */
+ int (*read_byte_data)(struct i2c_client *client, int page, int reg);
+ int (*read_word_data)(struct i2c_client *client, int page, int phase,
+ int reg);
+ int (*write_byte_data)(struct i2c_client *client, int page, int reg,
+ u8 byte);
+ int (*write_word_data)(struct i2c_client *client, int page, int reg,
+ u16 word);
+ int (*write_byte)(struct i2c_client *client, int page, u8 value);
+ /*
+ * The identify function determines supported PMBus functionality.
+ * This function is only necessary if a chip driver supports multiple
+ * chips, and the chip functionality is not pre-determined.
+ */
+ int (*identify)(struct i2c_client *client,
+ struct pmbus_driver_info *info);
+
+ /* Regulator functionality, if supported by this chip driver. */
+ int num_regulators;
+ const struct regulator_desc *reg_desc;
+
+ /* custom attributes */
+ const struct attribute_group **groups;
+};
+
+/* Regulator ops */
+
+extern const struct regulator_ops pmbus_regulator_ops;
+
+/* Macros for filling in array of struct regulator_desc */
+#define PMBUS_REGULATOR_STEP(_name, _id, _voltages, _step) \
+ [_id] = { \
+ .name = (_name # _id), \
+ .id = (_id), \
+ .of_match = of_match_ptr(_name # _id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &pmbus_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .n_voltages = _voltages, \
+ .uV_step = _step, \
+ }
+
+#define PMBUS_REGULATOR(_name, _id) PMBUS_REGULATOR_STEP(_name, _id, 0, 0)
+
+/* Function declarations */
+
+void pmbus_clear_cache(struct i2c_client *client);
+void pmbus_set_update(struct i2c_client *client, u8 reg, bool update);
+int pmbus_set_page(struct i2c_client *client, int page, int phase);
+int pmbus_read_word_data(struct i2c_client *client, int page, int phase,
+ u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+ u16 word);
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 value);
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value);
+void pmbus_clear_faults(struct i2c_client *client);
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info);
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
+ *client);
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode);
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode);
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+ u8 config, u8 mask, u16 command);
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client);
+
+#endif /* PMBUS_H */