Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 390 insertions, 0 deletions

diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
new file mode 100644
index 000000000..9838c79cb
--- /dev/null
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -0,0 +1,390 @@
+/*
+ * SPEAr Keyboard Driver
+ * Based on omap-keypad driver
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar <rajeevkumar.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/platform_data/keyboard-spear.h>
+
+/* Keyboard Registers */
+#define MODE_CTL_REG	0x00
+#define STATUS_REG	0x0C
+#define DATA_REG	0x10
+#define INTR_MASK	0x54
+
+/* Register Values */
+#define NUM_ROWS	16
+#define NUM_COLS	16
+#define MODE_CTL_PCLK_FREQ_SHIFT	9
+#define MODE_CTL_PCLK_FREQ_MSK		0x7F
+
+#define MODE_CTL_KEYBOARD	(0x2 << 0)
+#define MODE_CTL_SCAN_RATE_10	(0x0 << 2)
+#define MODE_CTL_SCAN_RATE_20	(0x1 << 2)
+#define MODE_CTL_SCAN_RATE_40	(0x2 << 2)
+#define MODE_CTL_SCAN_RATE_80	(0x3 << 2)
+#define MODE_CTL_KEYNUM_SHIFT	6
+#define MODE_CTL_START_SCAN	(0x1 << 8)
+
+#define STATUS_DATA_AVAIL	(0x1 << 1)
+
+#define DATA_ROW_MASK		0xF0
+#define DATA_COLUMN_MASK	0x0F
+
+#define ROW_SHIFT		4
+
+struct spear_kbd {
+	struct input_dev *input;
+	void __iomem *io_base;
+	struct clk *clk;
+	unsigned int irq;
+	unsigned int mode;
+	unsigned int suspended_rate;
+	unsigned short last_key;
+	unsigned short keycodes[NUM_ROWS * NUM_COLS];
+	bool rep;
+	bool irq_wake_enabled;
+	u32 mode_ctl_reg;
+};
+
+static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
+{
+	struct spear_kbd *kbd = dev_id;
+	struct input_dev *input = kbd->input;
+	unsigned int key;
+	u32 sts, val;
+
+	sts = readl_relaxed(kbd->io_base + STATUS_REG);
+	if (!(sts & STATUS_DATA_AVAIL))
+		return IRQ_NONE;
+
+	if (kbd->last_key != KEY_RESERVED) {
+		input_report_key(input, kbd->last_key, 0);
+		kbd->last_key = KEY_RESERVED;
+	}
+
+	/* following reads active (row, col) pair */
+	val = readl_relaxed(kbd->io_base + DATA_REG) &
+		(DATA_ROW_MASK | DATA_COLUMN_MASK);
+	key = kbd->keycodes[val];
+
+	input_event(input, EV_MSC, MSC_SCAN, val);
+	input_report_key(input, key, 1);
+	input_sync(input);
+
+	kbd->last_key = key;
+
+	/* clear interrupt */
+	writel_relaxed(0, kbd->io_base + STATUS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_kbd_open(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	int error;
+	u32 val;
+
+	kbd->last_key = KEY_RESERVED;
+
+	error = clk_enable(kbd->clk);
+	if (error)
+		return error;
+
+	/* keyboard rate to be programmed is input clock (in MHz) - 1 */
+	val = clk_get_rate(kbd->clk) / 1000000 - 1;
+	val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT;
+
+	/* program keyboard */
+	val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val |
+		(kbd->mode << MODE_CTL_KEYNUM_SHIFT);
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+	writel_relaxed(1, kbd->io_base + STATUS_REG);
+
+	/* start key scan */
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val |= MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	return 0;
+}
+
+static void spear_kbd_close(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	u32 val;
+
+	/* stop key scan */
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val &= ~MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	clk_disable(kbd->clk);
+
+	kbd->last_key = KEY_RESERVED;
+}
+
+#ifdef CONFIG_OF
+static int spear_kbd_parse_dt(struct platform_device *pdev,
+                                        struct spear_kbd *kbd)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int error;
+	u32 val, suspended_rate;
+
+	if (!np) {
+		dev_err(&pdev->dev, "Missing DT data\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(np, "autorepeat"))
+		kbd->rep = true;
+
+	if (of_property_read_u32(np, "suspended_rate", &suspended_rate))
+		kbd->suspended_rate = suspended_rate;
+
+	error = of_property_read_u32(np, "st,mode", &val);
+	if (error) {
+		dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
+		return error;
+	}
+
+	kbd->mode = val;
+	return 0;
+}
+#else
+static inline int spear_kbd_parse_dt(struct platform_device *pdev,
+				     struct spear_kbd *kbd)
+{
+	return -ENOSYS;
+}
+#endif
+
+static int spear_kbd_probe(struct platform_device *pdev)
+{
+	struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	kbd = devm_kzalloc(&pdev->dev, sizeof(*kbd), GFP_KERNEL);
+	if (!kbd) {
+		dev_err(&pdev->dev, "not enough memory for driver data\n");
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	kbd->input = input_dev;
+	kbd->irq = irq;
+
+	if (!pdata) {
+		error = spear_kbd_parse_dt(pdev, kbd);
+		if (error)
+			return error;
+	} else {
+		kbd->mode = pdata->mode;
+		kbd->rep = pdata->rep;
+		kbd->suspended_rate = pdata->suspended_rate;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	kbd->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kbd->io_base))
+		return PTR_ERR(kbd->io_base);
+
+	kbd->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kbd->clk))
+		return PTR_ERR(kbd->clk);
+
+	input_dev->name = "Spear Keyboard";
+	input_dev->phys = "keyboard/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->open = spear_kbd_open;
+	input_dev->close = spear_kbd_close;
+
+	error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS,
+					   kbd->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		return error;
+	}
+
+	if (kbd->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_set_drvdata(input_dev, kbd);
+
+	error = devm_request_irq(&pdev->dev, irq, spear_kbd_interrupt, 0,
+			"keyboard", kbd);
+	if (error) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		return error;
+	}
+
+	error = clk_prepare(kbd->clk);
+	if (error)
+		return error;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to register keyboard device\n");
+		clk_unprepare(kbd->clk);
+		return error;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, kbd);
+
+	return 0;
+}
+
+static int spear_kbd_remove(struct platform_device *pdev)
+{
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+
+	input_unregister_device(kbd->input);
+	clk_unprepare(kbd->clk);
+
+	return 0;
+}
+
+static int __maybe_unused spear_kbd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+	unsigned int rate = 0, mode_ctl_reg, val;
+
+	mutex_lock(&input_dev->mutex);
+
+	/* explicitly enable clock as we may program device */
+	clk_enable(kbd->clk);
+
+	mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (!enable_irq_wake(kbd->irq))
+			kbd->irq_wake_enabled = true;
+
+		/*
+		 * reprogram the keyboard operating frequency as on some
+		 * platform it may change during system suspended
+		 */
+		if (kbd->suspended_rate)
+			rate = kbd->suspended_rate / 1000000 - 1;
+		else
+			rate = clk_get_rate(kbd->clk) / 1000000 - 1;
+
+		val = mode_ctl_reg &
+			~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT);
+		val |= (rate & MODE_CTL_PCLK_FREQ_MSK)
+			<< MODE_CTL_PCLK_FREQ_SHIFT;
+		writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	} else {
+		if (input_device_enabled(input_dev)) {
+			writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN,
+					kbd->io_base + MODE_CTL_REG);
+			clk_disable(kbd->clk);
+		}
+	}
+
+	/* store current configuration */
+	if (input_device_enabled(input_dev))
+		kbd->mode_ctl_reg = mode_ctl_reg;
+
+	/* restore previous clk state */
+	clk_disable(kbd->clk);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused spear_kbd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (kbd->irq_wake_enabled) {
+			kbd->irq_wake_enabled = false;
+			disable_irq_wake(kbd->irq);
+		}
+	} else {
+		if (input_device_enabled(input_dev))
+			clk_enable(kbd->clk);
+	}
+
+	/* restore current configuration */
+	if (input_device_enabled(input_dev))
+		writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id spear_kbd_id_table[] = {
+	{ .compatible = "st,spear300-kbd" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_kbd_id_table);
+#endif
+
+static struct platform_driver spear_kbd_driver = {
+	.probe		= spear_kbd_probe,
+	.remove		= spear_kbd_remove,
+	.driver		= {
+		.name	= "keyboard",
+		.pm	= &spear_kbd_pm_ops,
+		.of_match_table = of_match_ptr(spear_kbd_id_table),
+	},
+};
+module_platform_driver(spear_kbd_driver);
+
+MODULE_AUTHOR("Rajeev Kumar");
+MODULE_DESCRIPTION("SPEAr Keyboard Driver");
+MODULE_LICENSE("GPL");