Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 2952 insertions, 0 deletions

diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
new file mode 100644
index 000000000..a80cfcd87
--- /dev/null
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config IR_IMG
+	tristate "ImgTec IR Decoder"
+	depends on RC_CORE
+	depends on MIPS || COMPILE_TEST
+	select IR_IMG_HW if !IR_IMG_RAW
+	help
+	   Say Y or M here if you want to use the ImgTec infrared decoder
+	   functionality found in SoCs such as TZ1090.
+
+config IR_IMG_RAW
+	bool "Raw decoder"
+	depends on IR_IMG
+	help
+	   Say Y here to enable the raw mode driver which passes raw IR signal
+	   changes to the IR raw decoders for software decoding. This is much
+	   less reliable (due to lack of timestamps) and consumes more
+	   processing power than using hardware decode, but can be useful for
+	   testing, debug, and to make more protocols available.
+
+config IR_IMG_HW
+	bool "Hardware decoder"
+	depends on IR_IMG
+	help
+	   Say Y here to enable the hardware decode driver which decodes the IR
+	   signals in hardware. This is more reliable, consumes less processing
+	   power since only a single interrupt is received for each scancode,
+	   and allows an IR scancode to be used as a wake event.
+
+config IR_IMG_NEC
+	bool "NEC protocol support"
+	depends on IR_IMG_HW
+	select BITREVERSE
+	help
+	   Say Y here to enable support for the NEC, extended NEC, and 32-bit
+	   NEC protocols in the ImgTec infrared decoder block.
+
+config IR_IMG_JVC
+	bool "JVC protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the JVC protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_SONY
+	bool "Sony protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sony protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_SHARP
+	bool "Sharp protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sharp protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_SANYO
+	bool "Sanyo protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sanyo protocol (used by Sanyo,
+	   Aiwa, Chinon remotes) in the ImgTec infrared decoder block.
+
+config IR_IMG_RC5
+	bool "Philips RC5 protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the RC5 protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_RC6
+	bool "Philips RC6 protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the RC6 protocol in the ImgTec
+	   infrared decoder block.
+	   Note: This version only supports mode 0.
diff --git a/drivers/media/rc/img-ir/Makefile b/drivers/media/rc/img-ir/Makefile
new file mode 100644
index 000000000..741fedc5d
--- /dev/null
+++ b/drivers/media/rc/img-ir/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+img-ir-y			:= img-ir-core.o
+img-ir-$(CONFIG_IR_IMG_RAW)	+= img-ir-raw.o
+img-ir-$(CONFIG_IR_IMG_HW)	+= img-ir-hw.o
+img-ir-$(CONFIG_IR_IMG_NEC)	+= img-ir-nec.o
+img-ir-$(CONFIG_IR_IMG_JVC)	+= img-ir-jvc.o
+img-ir-$(CONFIG_IR_IMG_SONY)	+= img-ir-sony.o
+img-ir-$(CONFIG_IR_IMG_SHARP)	+= img-ir-sharp.o
+img-ir-$(CONFIG_IR_IMG_SANYO)	+= img-ir-sanyo.o
+img-ir-$(CONFIG_IR_IMG_RC5)	+= img-ir-rc5.o
+img-ir-$(CONFIG_IR_IMG_RC6)	+= img-ir-rc6.o
+img-ir-objs			:= $(img-ir-y)
+
+obj-$(CONFIG_IR_IMG)		+= img-ir.o
diff --git a/drivers/media/rc/img-ir/img-ir-core.c b/drivers/media/rc/img-ir/img-ir-core.c
new file mode 100644
index 000000000..6f8464872
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-core.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This contains core img-ir code for setting up the driver. The two interfaces
+ * (raw and hardware decode) are handled separately.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "img-ir.h"
+
+static irqreturn_t img_ir_isr(int irq, void *dev_id)
+{
+	struct img_ir_priv *priv = dev_id;
+	u32 irq_status;
+
+	spin_lock(&priv->lock);
+	/* we have to clear irqs before reading */
+	irq_status = img_ir_read(priv, IMG_IR_IRQ_STATUS);
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_status);
+
+	/* don't handle valid data irqs if we're only interested in matches */
+	irq_status &= img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+
+	/* hand off edge interrupts to raw decode handler */
+	if (irq_status & IMG_IR_IRQ_EDGE && img_ir_raw_enabled(&priv->raw))
+		img_ir_isr_raw(priv, irq_status);
+
+	/* hand off hardware match interrupts to hardware decode handler */
+	if (irq_status & (IMG_IR_IRQ_DATA_MATCH |
+			  IMG_IR_IRQ_DATA_VALID |
+			  IMG_IR_IRQ_DATA2_VALID) &&
+	    img_ir_hw_enabled(&priv->hw))
+		img_ir_isr_hw(priv, irq_status);
+
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+}
+
+static void img_ir_setup(struct img_ir_priv *priv)
+{
+	/* start off with interrupts disabled */
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, 0);
+
+	img_ir_setup_raw(priv);
+	img_ir_setup_hw(priv);
+
+	if (!IS_ERR(priv->clk))
+		clk_prepare_enable(priv->clk);
+}
+
+static void img_ir_ident(struct img_ir_priv *priv)
+{
+	u32 core_rev = img_ir_read(priv, IMG_IR_CORE_REV);
+
+	dev_info(priv->dev,
+		 "IMG IR Decoder (%d.%d.%d.%d) probed successfully\n",
+		 (core_rev & IMG_IR_DESIGNER) >> IMG_IR_DESIGNER_SHIFT,
+		 (core_rev & IMG_IR_MAJOR_REV) >> IMG_IR_MAJOR_REV_SHIFT,
+		 (core_rev & IMG_IR_MINOR_REV) >> IMG_IR_MINOR_REV_SHIFT,
+		 (core_rev & IMG_IR_MAINT_REV) >> IMG_IR_MAINT_REV_SHIFT);
+	dev_info(priv->dev, "Modes:%s%s\n",
+		 img_ir_hw_enabled(&priv->hw) ? " hardware" : "",
+		 img_ir_raw_enabled(&priv->raw) ? " raw" : "");
+}
+
+static int img_ir_probe(struct platform_device *pdev)
+{
+	struct img_ir_priv *priv;
+	int irq, error, error2;
+
+	/* Get resources from platform device */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/* Private driver data */
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	priv->dev = &pdev->dev;
+	spin_lock_init(&priv->lock);
+
+	/* Ioremap the registers */
+	priv->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->reg_base))
+		return PTR_ERR(priv->reg_base);
+
+	/* Get core clock */
+	priv->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(priv->clk))
+		dev_warn(&pdev->dev, "cannot get core clock resource\n");
+
+	/* Get sys clock */
+	priv->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(priv->sys_clk))
+		dev_warn(&pdev->dev, "cannot get sys clock resource\n");
+	/*
+	 * Enabling the system clock before the register interface is
+	 * accessed. ISR shouldn't get called with Sys Clock disabled,
+	 * hence exiting probe with an error.
+	 */
+	if (!IS_ERR(priv->sys_clk)) {
+		error = clk_prepare_enable(priv->sys_clk);
+		if (error) {
+			dev_err(&pdev->dev, "cannot enable sys clock\n");
+			return error;
+		}
+	}
+
+	/* Set up raw & hw decoder */
+	error = img_ir_probe_raw(priv);
+	error2 = img_ir_probe_hw(priv);
+	if (error && error2) {
+		if (error == -ENODEV)
+			error = error2;
+		goto err_probe;
+	}
+
+	/* Get the IRQ */
+	priv->irq = irq;
+	error = request_irq(priv->irq, img_ir_isr, 0, "img-ir", priv);
+	if (error) {
+		dev_err(&pdev->dev, "cannot register IRQ %u\n",
+			priv->irq);
+		error = -EIO;
+		goto err_irq;
+	}
+
+	img_ir_ident(priv);
+	img_ir_setup(priv);
+
+	return 0;
+
+err_irq:
+	img_ir_remove_hw(priv);
+	img_ir_remove_raw(priv);
+err_probe:
+	if (!IS_ERR(priv->sys_clk))
+		clk_disable_unprepare(priv->sys_clk);
+	return error;
+}
+
+static int img_ir_remove(struct platform_device *pdev)
+{
+	struct img_ir_priv *priv = platform_get_drvdata(pdev);
+
+	free_irq(priv->irq, priv);
+	img_ir_remove_hw(priv);
+	img_ir_remove_raw(priv);
+
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+	if (!IS_ERR(priv->sys_clk))
+		clk_disable_unprepare(priv->sys_clk);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(img_ir_pmops, img_ir_suspend, img_ir_resume);
+
+static const struct of_device_id img_ir_match[] = {
+	{ .compatible = "img,ir-rev1" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, img_ir_match);
+
+static struct platform_driver img_ir_driver = {
+	.driver = {
+		.name = "img-ir",
+		.of_match_table	= img_ir_match,
+		.pm = &img_ir_pmops,
+	},
+	.probe = img_ir_probe,
+	.remove = img_ir_remove,
+};
+
+module_platform_driver(img_ir_driver);
+
+MODULE_AUTHOR("Imagination Technologies Ltd.");
+MODULE_DESCRIPTION("ImgTec IR");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
new file mode 100644
index 000000000..5da7479c1
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -0,0 +1,1147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Hardware Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This ties into the input subsystem using the RC-core. Protocol support is
+ * provided in separate modules which provide the parameters and scancode
+ * translation functions to set up the hardware decoder and interpret the
+ * resulting input.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <media/rc-core.h>
+#include "img-ir.h"
+
+/* Decoders lock (only modified to preprocess them) */
+static DEFINE_SPINLOCK(img_ir_decoders_lock);
+
+static bool img_ir_decoders_preprocessed;
+static struct img_ir_decoder *img_ir_decoders[] = {
+#ifdef CONFIG_IR_IMG_NEC
+	&img_ir_nec,
+#endif
+#ifdef CONFIG_IR_IMG_JVC
+	&img_ir_jvc,
+#endif
+#ifdef CONFIG_IR_IMG_SONY
+	&img_ir_sony,
+#endif
+#ifdef CONFIG_IR_IMG_SHARP
+	&img_ir_sharp,
+#endif
+#ifdef CONFIG_IR_IMG_SANYO
+	&img_ir_sanyo,
+#endif
+#ifdef CONFIG_IR_IMG_RC5
+	&img_ir_rc5,
+#endif
+#ifdef CONFIG_IR_IMG_RC6
+	&img_ir_rc6,
+#endif
+	NULL
+};
+
+#define IMG_IR_F_FILTER		BIT(RC_FILTER_NORMAL)	/* enable filtering */
+#define IMG_IR_F_WAKE		BIT(RC_FILTER_WAKEUP)	/* enable waking */
+
+/* code type quirks */
+
+#define IMG_IR_QUIRK_CODE_BROKEN	0x1	/* Decode is broken */
+#define IMG_IR_QUIRK_CODE_LEN_INCR	0x2	/* Bit length needs increment */
+/*
+ * The decoder generates rapid interrupts without actually having
+ * received any new data after an incomplete IR code is decoded.
+ */
+#define IMG_IR_QUIRK_CODE_IRQ		0x4
+
+/* functions for preprocessing timings, ensuring max is set */
+
+static void img_ir_timing_preprocess(struct img_ir_timing_range *range,
+				     unsigned int unit)
+{
+	if (range->max < range->min)
+		range->max = range->min;
+	if (unit) {
+		/* multiply by unit and convert to microseconds */
+		range->min = (range->min*unit)/1000;
+		range->max = (range->max*unit + 999)/1000; /* round up */
+	}
+}
+
+static void img_ir_symbol_timing_preprocess(struct img_ir_symbol_timing *timing,
+					    unsigned int unit)
+{
+	img_ir_timing_preprocess(&timing->pulse, unit);
+	img_ir_timing_preprocess(&timing->space, unit);
+}
+
+static void img_ir_timings_preprocess(struct img_ir_timings *timings,
+				      unsigned int unit)
+{
+	img_ir_symbol_timing_preprocess(&timings->ldr, unit);
+	img_ir_symbol_timing_preprocess(&timings->s00, unit);
+	img_ir_symbol_timing_preprocess(&timings->s01, unit);
+	img_ir_symbol_timing_preprocess(&timings->s10, unit);
+	img_ir_symbol_timing_preprocess(&timings->s11, unit);
+	/* default s10 and s11 to s00 and s01 if no leader */
+	if (unit)
+		/* multiply by unit and convert to microseconds (round up) */
+		timings->ft.ft_min = (timings->ft.ft_min*unit + 999)/1000;
+}
+
+/* functions for filling empty fields with defaults */
+
+static void img_ir_timing_defaults(struct img_ir_timing_range *range,
+				   struct img_ir_timing_range *defaults)
+{
+	if (!range->min)
+		range->min = defaults->min;
+	if (!range->max)
+		range->max = defaults->max;
+}
+
+static void img_ir_symbol_timing_defaults(struct img_ir_symbol_timing *timing,
+					  struct img_ir_symbol_timing *defaults)
+{
+	img_ir_timing_defaults(&timing->pulse, &defaults->pulse);
+	img_ir_timing_defaults(&timing->space, &defaults->space);
+}
+
+static void img_ir_timings_defaults(struct img_ir_timings *timings,
+				    struct img_ir_timings *defaults)
+{
+	img_ir_symbol_timing_defaults(&timings->ldr, &defaults->ldr);
+	img_ir_symbol_timing_defaults(&timings->s00, &defaults->s00);
+	img_ir_symbol_timing_defaults(&timings->s01, &defaults->s01);
+	img_ir_symbol_timing_defaults(&timings->s10, &defaults->s10);
+	img_ir_symbol_timing_defaults(&timings->s11, &defaults->s11);
+	if (!timings->ft.ft_min)
+		timings->ft.ft_min = defaults->ft.ft_min;
+}
+
+/* functions for converting timings to register values */
+
+/**
+ * img_ir_control() - Convert control struct to control register value.
+ * @control:	Control data
+ *
+ * Returns:	The control register value equivalent of @control.
+ */
+static u32 img_ir_control(const struct img_ir_control *control)
+{
+	u32 ctrl = control->code_type << IMG_IR_CODETYPE_SHIFT;
+	if (control->decoden)
+		ctrl |= IMG_IR_DECODEN;
+	if (control->hdrtog)
+		ctrl |= IMG_IR_HDRTOG;
+	if (control->ldrdec)
+		ctrl |= IMG_IR_LDRDEC;
+	if (control->decodinpol)
+		ctrl |= IMG_IR_DECODINPOL;
+	if (control->bitorien)
+		ctrl |= IMG_IR_BITORIEN;
+	if (control->d1validsel)
+		ctrl |= IMG_IR_D1VALIDSEL;
+	if (control->bitinv)
+		ctrl |= IMG_IR_BITINV;
+	if (control->decodend2)
+		ctrl |= IMG_IR_DECODEND2;
+	if (control->bitoriend2)
+		ctrl |= IMG_IR_BITORIEND2;
+	if (control->bitinvd2)
+		ctrl |= IMG_IR_BITINVD2;
+	return ctrl;
+}
+
+/**
+ * img_ir_timing_range_convert() - Convert microsecond range.
+ * @out:	Output timing range in clock cycles with a shift.
+ * @in:		Input timing range in microseconds.
+ * @tolerance:	Tolerance as a fraction of 128 (roughly percent).
+ * @clock_hz:	IR clock rate in Hz.
+ * @shift:	Shift of output units.
+ *
+ * Converts min and max from microseconds to IR clock cycles, applies a
+ * tolerance, and shifts for the register, rounding in the right direction.
+ * Note that in and out can safely be the same object.
+ */
+static void img_ir_timing_range_convert(struct img_ir_timing_range *out,
+					const struct img_ir_timing_range *in,
+					unsigned int tolerance,
+					unsigned long clock_hz,
+					unsigned int shift)
+{
+	unsigned int min = in->min;
+	unsigned int max = in->max;
+	/* add a tolerance */
+	min = min - (min*tolerance >> 7);
+	max = max + (max*tolerance >> 7);
+	/* convert from microseconds into clock cycles */
+	min = min*clock_hz / 1000000;
+	max = (max*clock_hz + 999999) / 1000000; /* round up */
+	/* apply shift and copy to output */
+	out->min = min >> shift;
+	out->max = (max + ((1 << shift) - 1)) >> shift; /* round up */
+}
+
+/**
+ * img_ir_symbol_timing() - Convert symbol timing struct to register value.
+ * @timing:	Symbol timing data
+ * @tolerance:	Timing tolerance where 0-128 represents 0-100%
+ * @clock_hz:	Frequency of source clock in Hz
+ * @pd_shift:	Shift to apply to symbol period
+ * @w_shift:	Shift to apply to symbol width
+ *
+ * Returns:	Symbol timing register value based on arguments.
+ */
+static u32 img_ir_symbol_timing(const struct img_ir_symbol_timing *timing,
+				unsigned int tolerance,
+				unsigned long clock_hz,
+				unsigned int pd_shift,
+				unsigned int w_shift)
+{
+	struct img_ir_timing_range hw_pulse, hw_period;
+	/* we calculate period in hw_period, then convert in place */
+	hw_period.min = timing->pulse.min + timing->space.min;
+	hw_period.max = timing->pulse.max + timing->space.max;
+	img_ir_timing_range_convert(&hw_period, &hw_period,
+			tolerance, clock_hz, pd_shift);
+	img_ir_timing_range_convert(&hw_pulse, &timing->pulse,
+			tolerance, clock_hz, w_shift);
+	/* construct register value */
+	return	(hw_period.max	<< IMG_IR_PD_MAX_SHIFT)	|
+		(hw_period.min	<< IMG_IR_PD_MIN_SHIFT)	|
+		(hw_pulse.max	<< IMG_IR_W_MAX_SHIFT)	|
+		(hw_pulse.min	<< IMG_IR_W_MIN_SHIFT);
+}
+
+/**
+ * img_ir_free_timing() - Convert free time timing struct to register value.
+ * @timing:	Free symbol timing data
+ * @clock_hz:	Source clock frequency in Hz
+ *
+ * Returns:	Free symbol timing register value.
+ */
+static u32 img_ir_free_timing(const struct img_ir_free_timing *timing,
+			      unsigned long clock_hz)
+{
+	unsigned int minlen, maxlen, ft_min;
+	/* minlen is only 5 bits, and round minlen to multiple of 2 */
+	if (timing->minlen < 30)
+		minlen = timing->minlen & -2;
+	else
+		minlen = 30;
+	/* maxlen has maximum value of 48, and round maxlen to multiple of 2 */
+	if (timing->maxlen < 48)
+		maxlen = (timing->maxlen + 1) & -2;
+	else
+		maxlen = 48;
+	/* convert and shift ft_min, rounding upwards */
+	ft_min = (timing->ft_min*clock_hz + 999999) / 1000000;
+	ft_min = (ft_min + 7) >> 3;
+	/* construct register value */
+	return	(maxlen << IMG_IR_MAXLEN_SHIFT)	|
+		(minlen << IMG_IR_MINLEN_SHIFT)	|
+		(ft_min << IMG_IR_FT_MIN_SHIFT);
+}
+
+/**
+ * img_ir_free_timing_dynamic() - Update free time register value.
+ * @st_ft:	Static free time register value from img_ir_free_timing.
+ * @filter:	Current filter which may additionally restrict min/max len.
+ *
+ * Returns:	Updated free time register value based on the current filter.
+ */
+static u32 img_ir_free_timing_dynamic(u32 st_ft, struct img_ir_filter *filter)
+{
+	unsigned int minlen, maxlen, newminlen, newmaxlen;
+
+	/* round minlen, maxlen to multiple of 2 */
+	newminlen = filter->minlen & -2;
+	newmaxlen = (filter->maxlen + 1) & -2;
+	/* extract min/max len from register */
+	minlen = (st_ft & IMG_IR_MINLEN) >> IMG_IR_MINLEN_SHIFT;
+	maxlen = (st_ft & IMG_IR_MAXLEN) >> IMG_IR_MAXLEN_SHIFT;
+	/* if the new values are more restrictive, update the register value */
+	if (newminlen > minlen) {
+		st_ft &= ~IMG_IR_MINLEN;
+		st_ft |= newminlen << IMG_IR_MINLEN_SHIFT;
+	}
+	if (newmaxlen < maxlen) {
+		st_ft &= ~IMG_IR_MAXLEN;
+		st_ft |= newmaxlen << IMG_IR_MAXLEN_SHIFT;
+	}
+	return st_ft;
+}
+
+/**
+ * img_ir_timings_convert() - Convert timings to register values
+ * @regs:	Output timing register values
+ * @timings:	Input timing data
+ * @tolerance:	Timing tolerance where 0-128 represents 0-100%
+ * @clock_hz:	Source clock frequency in Hz
+ */
+static void img_ir_timings_convert(struct img_ir_timing_regvals *regs,
+				   const struct img_ir_timings *timings,
+				   unsigned int tolerance,
+				   unsigned int clock_hz)
+{
+	/* leader symbol timings are divided by 16 */
+	regs->ldr = img_ir_symbol_timing(&timings->ldr, tolerance, clock_hz,
+			4, 4);
+	/* other symbol timings, pd fields only are divided by 2 */
+	regs->s00 = img_ir_symbol_timing(&timings->s00, tolerance, clock_hz,
+			1, 0);
+	regs->s01 = img_ir_symbol_timing(&timings->s01, tolerance, clock_hz,
+			1, 0);
+	regs->s10 = img_ir_symbol_timing(&timings->s10, tolerance, clock_hz,
+			1, 0);
+	regs->s11 = img_ir_symbol_timing(&timings->s11, tolerance, clock_hz,
+			1, 0);
+	regs->ft = img_ir_free_timing(&timings->ft, clock_hz);
+}
+
+/**
+ * img_ir_decoder_preprocess() - Preprocess timings in decoder.
+ * @decoder:	Decoder to be preprocessed.
+ *
+ * Ensures that the symbol timing ranges are valid with respect to ordering, and
+ * does some fixed conversion on them.
+ */
+static void img_ir_decoder_preprocess(struct img_ir_decoder *decoder)
+{
+	/* default tolerance */
+	if (!decoder->tolerance)
+		decoder->tolerance = 10; /* percent */
+	/* and convert tolerance to fraction out of 128 */
+	decoder->tolerance = decoder->tolerance * 128 / 100;
+
+	/* fill in implicit fields */
+	img_ir_timings_preprocess(&decoder->timings, decoder->unit);
+
+	/* do the same for repeat timings if applicable */
+	if (decoder->repeat) {
+		img_ir_timings_preprocess(&decoder->rtimings, decoder->unit);
+		img_ir_timings_defaults(&decoder->rtimings, &decoder->timings);
+	}
+}
+
+/**
+ * img_ir_decoder_convert() - Generate internal timings in decoder.
+ * @decoder:	Decoder to be converted to internal timings.
+ * @reg_timings: Timing register values.
+ * @clock_hz:	IR clock rate in Hz.
+ *
+ * Fills out the repeat timings and timing register values for a specific clock
+ * rate.
+ */
+static void img_ir_decoder_convert(const struct img_ir_decoder *decoder,
+				   struct img_ir_reg_timings *reg_timings,
+				   unsigned int clock_hz)
+{
+	/* calculate control value */
+	reg_timings->ctrl = img_ir_control(&decoder->control);
+
+	/* fill in implicit fields and calculate register values */
+	img_ir_timings_convert(&reg_timings->timings, &decoder->timings,
+			       decoder->tolerance, clock_hz);
+
+	/* do the same for repeat timings if applicable */
+	if (decoder->repeat)
+		img_ir_timings_convert(&reg_timings->rtimings,
+				       &decoder->rtimings, decoder->tolerance,
+				       clock_hz);
+}
+
+/**
+ * img_ir_write_timings() - Write timings to the hardware now
+ * @priv:	IR private data
+ * @regs:	Timing register values to write
+ * @type:	RC filter type (RC_FILTER_*)
+ *
+ * Write timing register values @regs to the hardware, taking into account the
+ * current filter which may impose restrictions on the length of the expected
+ * data.
+ */
+static void img_ir_write_timings(struct img_ir_priv *priv,
+				 struct img_ir_timing_regvals *regs,
+				 enum rc_filter_type type)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+
+	/* filter may be more restrictive to minlen, maxlen */
+	u32 ft = regs->ft;
+	if (hw->flags & BIT(type))
+		ft = img_ir_free_timing_dynamic(regs->ft, &hw->filters[type]);
+	/* write to registers */
+	img_ir_write(priv, IMG_IR_LEAD_SYMB_TIMING, regs->ldr);
+	img_ir_write(priv, IMG_IR_S00_SYMB_TIMING, regs->s00);
+	img_ir_write(priv, IMG_IR_S01_SYMB_TIMING, regs->s01);
+	img_ir_write(priv, IMG_IR_S10_SYMB_TIMING, regs->s10);
+	img_ir_write(priv, IMG_IR_S11_SYMB_TIMING, regs->s11);
+	img_ir_write(priv, IMG_IR_FREE_SYMB_TIMING, ft);
+	dev_dbg(priv->dev, "timings: ldr=%#x, s=[%#x, %#x, %#x, %#x], ft=%#x\n",
+		regs->ldr, regs->s00, regs->s01, regs->s10, regs->s11, ft);
+}
+
+static void img_ir_write_filter(struct img_ir_priv *priv,
+				struct img_ir_filter *filter)
+{
+	if (filter) {
+		dev_dbg(priv->dev, "IR filter=%016llx & %016llx\n",
+			(unsigned long long)filter->data,
+			(unsigned long long)filter->mask);
+		img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_LW, (u32)filter->data);
+		img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_UP, (u32)(filter->data
+									>> 32));
+		img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, (u32)filter->mask);
+		img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, (u32)(filter->mask
+									>> 32));
+	} else {
+		dev_dbg(priv->dev, "IR clearing filter\n");
+		img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, 0);
+		img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, 0);
+	}
+}
+
+/* caller must have lock */
+static void _img_ir_set_filter(struct img_ir_priv *priv,
+			       struct img_ir_filter *filter)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	u32 irq_en, irq_on;
+
+	irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+	if (filter) {
+		/* Only use the match interrupt */
+		hw->filters[RC_FILTER_NORMAL] = *filter;
+		hw->flags |= IMG_IR_F_FILTER;
+		irq_on = IMG_IR_IRQ_DATA_MATCH;
+		irq_en &= ~(IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID);
+	} else {
+		/* Only use the valid interrupt */
+		hw->flags &= ~IMG_IR_F_FILTER;
+		irq_en &= ~IMG_IR_IRQ_DATA_MATCH;
+		irq_on = IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID;
+	}
+	irq_en |= irq_on;
+
+	img_ir_write_filter(priv, filter);
+	/* clear any interrupts we're enabling so we don't handle old ones */
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_on);
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+}
+
+/* caller must have lock */
+static void _img_ir_set_wake_filter(struct img_ir_priv *priv,
+				    struct img_ir_filter *filter)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	if (filter) {
+		/* Enable wake, and copy filter for later */
+		hw->filters[RC_FILTER_WAKEUP] = *filter;
+		hw->flags |= IMG_IR_F_WAKE;
+	} else {
+		/* Disable wake */
+		hw->flags &= ~IMG_IR_F_WAKE;
+	}
+}
+
+/* Callback for setting scancode filter */
+static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type,
+			     struct rc_scancode_filter *sc_filter)
+{
+	struct img_ir_priv *priv = dev->priv;
+	struct img_ir_priv_hw *hw = &priv->hw;
+	struct img_ir_filter filter, *filter_ptr = &filter;
+	int ret = 0;
+
+	dev_dbg(priv->dev, "IR scancode %sfilter=%08x & %08x\n",
+		type == RC_FILTER_WAKEUP ? "wake " : "",
+		sc_filter->data,
+		sc_filter->mask);
+
+	spin_lock_irq(&priv->lock);
+
+	/* filtering can always be disabled */
+	if (!sc_filter->mask) {
+		filter_ptr = NULL;
+		goto set_unlock;
+	}
+
+	/* current decoder must support scancode filtering */
+	if (!hw->decoder || !hw->decoder->filter) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	/* convert scancode filter to raw filter */
+	filter.minlen = 0;
+	filter.maxlen = ~0;
+	if (type == RC_FILTER_NORMAL) {
+		/* guess scancode from protocol */
+		ret = hw->decoder->filter(sc_filter, &filter,
+					  dev->enabled_protocols);
+	} else {
+		/* for wakeup user provided exact protocol variant */
+		ret = hw->decoder->filter(sc_filter, &filter,
+					  1ULL << dev->wakeup_protocol);
+	}
+	if (ret)
+		goto unlock;
+	dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n",
+		type == RC_FILTER_WAKEUP ? "wake " : "",
+		(unsigned long long)filter.data,
+		(unsigned long long)filter.mask);
+
+set_unlock:
+	/* apply raw filters */
+	switch (type) {
+	case RC_FILTER_NORMAL:
+		_img_ir_set_filter(priv, filter_ptr);
+		break;
+	case RC_FILTER_WAKEUP:
+		_img_ir_set_wake_filter(priv, filter_ptr);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+unlock:
+	spin_unlock_irq(&priv->lock);
+	return ret;
+}
+
+static int img_ir_set_normal_filter(struct rc_dev *dev,
+				    struct rc_scancode_filter *sc_filter)
+{
+	return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter);
+}
+
+static int img_ir_set_wakeup_filter(struct rc_dev *dev,
+				    struct rc_scancode_filter *sc_filter)
+{
+	return img_ir_set_filter(dev, RC_FILTER_WAKEUP, sc_filter);
+}
+
+/**
+ * img_ir_set_decoder() - Set the current decoder.
+ * @priv:	IR private data.
+ * @decoder:	Decoder to use with immediate effect.
+ * @proto:	Protocol bitmap (or 0 to use decoder->type).
+ */
+static void img_ir_set_decoder(struct img_ir_priv *priv,
+			       const struct img_ir_decoder *decoder,
+			       u64 proto)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	struct rc_dev *rdev = hw->rdev;
+	u32 ir_status, irq_en;
+	spin_lock_irq(&priv->lock);
+
+	/*
+	 * First record that the protocol is being stopped so that the end timer
+	 * isn't restarted while we're trying to stop it.
+	 */
+	hw->stopping = true;
+
+	/*
+	 * Release the lock to stop the end timer, since the end timer handler
+	 * acquires the lock and we don't want to deadlock waiting for it.
+	 */
+	spin_unlock_irq(&priv->lock);
+	del_timer_sync(&hw->end_timer);
+	del_timer_sync(&hw->suspend_timer);
+	spin_lock_irq(&priv->lock);
+
+	hw->stopping = false;
+
+	/* switch off and disable interrupts */
+	img_ir_write(priv, IMG_IR_CONTROL, 0);
+	irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en & IMG_IR_IRQ_EDGE);
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_ALL & ~IMG_IR_IRQ_EDGE);
+
+	/* ack any data already detected */
+	ir_status = img_ir_read(priv, IMG_IR_STATUS);
+	if (ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)) {
+		ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2);
+		img_ir_write(priv, IMG_IR_STATUS, ir_status);
+	}
+
+	/* always read data to clear buffer if IR wakes the device */
+	img_ir_read(priv, IMG_IR_DATA_LW);
+	img_ir_read(priv, IMG_IR_DATA_UP);
+
+	/* switch back to normal mode */
+	hw->mode = IMG_IR_M_NORMAL;
+
+	/* clear the wakeup scancode filter */
+	rdev->scancode_wakeup_filter.data = 0;
+	rdev->scancode_wakeup_filter.mask = 0;
+	rdev->wakeup_protocol = RC_PROTO_UNKNOWN;
+
+	/* clear raw filters */
+	_img_ir_set_filter(priv, NULL);
+	_img_ir_set_wake_filter(priv, NULL);
+
+	/* clear the enabled protocols */
+	hw->enabled_protocols = 0;
+
+	/* switch decoder */
+	hw->decoder = decoder;
+	if (!decoder)
+		goto unlock;
+
+	/* set the enabled protocols */
+	if (!proto)
+		proto = decoder->type;
+	hw->enabled_protocols = proto;
+
+	/* write the new timings */
+	img_ir_decoder_convert(decoder, &hw->reg_timings, hw->clk_hz);
+	img_ir_write_timings(priv, &hw->reg_timings.timings, RC_FILTER_NORMAL);
+
+	/* set up and enable */
+	img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl);
+
+
+unlock:
+	spin_unlock_irq(&priv->lock);
+}
+
+/**
+ * img_ir_decoder_compatible() - Find whether a decoder will work with a device.
+ * @priv:	IR private data.
+ * @dec:	Decoder to check.
+ *
+ * Returns:	true if @dec is compatible with the device @priv refers to.
+ */
+static bool img_ir_decoder_compatible(struct img_ir_priv *priv,
+				      const struct img_ir_decoder *dec)
+{
+	unsigned int ct;
+
+	/* don't accept decoders using code types which aren't supported */
+	ct = dec->control.code_type;
+	if (priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_BROKEN)
+		return false;
+
+	return true;
+}
+
+/**
+ * img_ir_allowed_protos() - Get allowed protocols from global decoder list.
+ * @priv:	IR private data.
+ *
+ * Returns:	Mask of protocols supported by the device @priv refers to.
+ */
+static u64 img_ir_allowed_protos(struct img_ir_priv *priv)
+{
+	u64 protos = 0;
+	struct img_ir_decoder **decp;
+
+	for (decp = img_ir_decoders; *decp; ++decp) {
+		const struct img_ir_decoder *dec = *decp;
+		if (img_ir_decoder_compatible(priv, dec))
+			protos |= dec->type;
+	}
+	return protos;
+}
+
+/* Callback for changing protocol using sysfs */
+static int img_ir_change_protocol(struct rc_dev *dev, u64 *ir_type)
+{
+	struct img_ir_priv *priv = dev->priv;
+	struct img_ir_priv_hw *hw = &priv->hw;
+	struct rc_dev *rdev = hw->rdev;
+	struct img_ir_decoder **decp;
+	u64 wakeup_protocols;
+
+	if (!*ir_type) {
+		/* disable all protocols */
+		img_ir_set_decoder(priv, NULL, 0);
+		goto success;
+	}
+	for (decp = img_ir_decoders; *decp; ++decp) {
+		const struct img_ir_decoder *dec = *decp;
+		if (!img_ir_decoder_compatible(priv, dec))
+			continue;
+		if (*ir_type & dec->type) {
+			*ir_type &= dec->type;
+			img_ir_set_decoder(priv, dec, *ir_type);
+			goto success;
+		}
+	}
+	return -EINVAL;
+
+success:
+	/*
+	 * Only allow matching wakeup protocols for now, and only if filtering
+	 * is supported.
+	 */
+	wakeup_protocols = *ir_type;
+	if (!hw->decoder || !hw->decoder->filter)
+		wakeup_protocols = 0;
+	rdev->allowed_wakeup_protocols = wakeup_protocols;
+	return 0;
+}
+
+/* Changes ir-core protocol device attribute */
+static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto)
+{
+	struct rc_dev *rdev = priv->hw.rdev;
+
+	mutex_lock(&rdev->lock);
+	rdev->enabled_protocols = proto;
+	rdev->allowed_wakeup_protocols = proto;
+	mutex_unlock(&rdev->lock);
+}
+
+/* Set up IR decoders */
+static void img_ir_init_decoders(void)
+{
+	struct img_ir_decoder **decp;
+
+	spin_lock(&img_ir_decoders_lock);
+	if (!img_ir_decoders_preprocessed) {
+		for (decp = img_ir_decoders; *decp; ++decp)
+			img_ir_decoder_preprocess(*decp);
+		img_ir_decoders_preprocessed = true;
+	}
+	spin_unlock(&img_ir_decoders_lock);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * img_ir_enable_wake() - Switch to wake mode.
+ * @priv:	IR private data.
+ *
+ * Returns:	non-zero if the IR can wake the system.
+ */
+static int img_ir_enable_wake(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	int ret = 0;
+
+	spin_lock_irq(&priv->lock);
+	if (hw->flags & IMG_IR_F_WAKE) {
+		/* interrupt only on a match */
+		hw->suspend_irqen = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+		img_ir_write(priv, IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_DATA_MATCH);
+		img_ir_write_filter(priv, &hw->filters[RC_FILTER_WAKEUP]);
+		img_ir_write_timings(priv, &hw->reg_timings.timings,
+				     RC_FILTER_WAKEUP);
+		hw->mode = IMG_IR_M_WAKE;
+		ret = 1;
+	}
+	spin_unlock_irq(&priv->lock);
+	return ret;
+}
+
+/**
+ * img_ir_disable_wake() - Switch out of wake mode.
+ * @priv:	IR private data
+ *
+ * Returns:	1 if the hardware should be allowed to wake from a sleep state.
+ *		0 otherwise.
+ */
+static int img_ir_disable_wake(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	int ret = 0;
+
+	spin_lock_irq(&priv->lock);
+	if (hw->flags & IMG_IR_F_WAKE) {
+		/* restore normal filtering */
+		if (hw->flags & IMG_IR_F_FILTER) {
+			img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+				     (hw->suspend_irqen & IMG_IR_IRQ_EDGE) |
+				     IMG_IR_IRQ_DATA_MATCH);
+			img_ir_write_filter(priv,
+					    &hw->filters[RC_FILTER_NORMAL]);
+		} else {
+			img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+				     (hw->suspend_irqen & IMG_IR_IRQ_EDGE) |
+				     IMG_IR_IRQ_DATA_VALID |
+				     IMG_IR_IRQ_DATA2_VALID);
+			img_ir_write_filter(priv, NULL);
+		}
+		img_ir_write_timings(priv, &hw->reg_timings.timings,
+				     RC_FILTER_NORMAL);
+		hw->mode = IMG_IR_M_NORMAL;
+		ret = 1;
+	}
+	spin_unlock_irq(&priv->lock);
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/* lock must be held */
+static void img_ir_begin_repeat(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	if (hw->mode == IMG_IR_M_NORMAL) {
+		/* switch to repeat timings */
+		img_ir_write(priv, IMG_IR_CONTROL, 0);
+		hw->mode = IMG_IR_M_REPEATING;
+		img_ir_write_timings(priv, &hw->reg_timings.rtimings,
+				     RC_FILTER_NORMAL);
+		img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl);
+	}
+}
+
+/* lock must be held */
+static void img_ir_end_repeat(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	if (hw->mode == IMG_IR_M_REPEATING) {
+		/* switch to normal timings */
+		img_ir_write(priv, IMG_IR_CONTROL, 0);
+		hw->mode = IMG_IR_M_NORMAL;
+		img_ir_write_timings(priv, &hw->reg_timings.timings,
+				     RC_FILTER_NORMAL);
+		img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl);
+	}
+}
+
+/* lock must be held */
+static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	const struct img_ir_decoder *dec = hw->decoder;
+	int ret = IMG_IR_SCANCODE;
+	struct img_ir_scancode_req request;
+
+	request.protocol = RC_PROTO_UNKNOWN;
+	request.toggle   = 0;
+
+	if (dec->scancode)
+		ret = dec->scancode(len, raw, hw->enabled_protocols, &request);
+	else if (len >= 32)
+		request.scancode = (u32)raw;
+	else if (len < 32)
+		request.scancode = (u32)raw & ((1 << len)-1);
+	dev_dbg(priv->dev, "data (%u bits) = %#llx\n",
+		len, (unsigned long long)raw);
+	if (ret == IMG_IR_SCANCODE) {
+		dev_dbg(priv->dev, "decoded scan code %#x, toggle %u\n",
+			request.scancode, request.toggle);
+		rc_keydown(hw->rdev, request.protocol, request.scancode,
+			   request.toggle);
+		img_ir_end_repeat(priv);
+	} else if (ret == IMG_IR_REPEATCODE) {
+		if (hw->mode == IMG_IR_M_REPEATING) {
+			dev_dbg(priv->dev, "decoded repeat code\n");
+			rc_repeat(hw->rdev);
+		} else {
+			dev_dbg(priv->dev, "decoded unexpected repeat code, ignoring\n");
+		}
+	} else {
+		dev_dbg(priv->dev, "decode failed (%d)\n", ret);
+		return;
+	}
+
+
+	/* we mustn't update the end timer while trying to stop it */
+	if (dec->repeat && !hw->stopping) {
+		unsigned long interval;
+
+		img_ir_begin_repeat(priv);
+
+		/* update timer, but allowing for 1/8th tolerance */
+		interval = dec->repeat + (dec->repeat >> 3);
+		mod_timer(&hw->end_timer,
+			  jiffies + msecs_to_jiffies(interval));
+	}
+}
+
+/* timer function to end waiting for repeat. */
+static void img_ir_end_timer(struct timer_list *t)
+{
+	struct img_ir_priv *priv = from_timer(priv, t, hw.end_timer);
+
+	spin_lock_irq(&priv->lock);
+	img_ir_end_repeat(priv);
+	spin_unlock_irq(&priv->lock);
+}
+
+/*
+ * Timer function to re-enable the current protocol after it had been
+ * cleared when invalid interrupts were generated due to a quirk in the
+ * img-ir decoder.
+ */
+static void img_ir_suspend_timer(struct timer_list *t)
+{
+	struct img_ir_priv *priv = from_timer(priv, t, hw.suspend_timer);
+
+	spin_lock_irq(&priv->lock);
+	/*
+	 * Don't overwrite enabled valid/match IRQs if they have already been
+	 * changed by e.g. a filter change.
+	 */
+	if ((priv->hw.quirk_suspend_irq & IMG_IR_IRQ_EDGE) ==
+				img_ir_read(priv, IMG_IR_IRQ_ENABLE))
+		img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+					priv->hw.quirk_suspend_irq);
+	/* enable */
+	img_ir_write(priv, IMG_IR_CONTROL, priv->hw.reg_timings.ctrl);
+	spin_unlock_irq(&priv->lock);
+}
+
+#ifdef CONFIG_COMMON_CLK
+static void img_ir_change_frequency(struct img_ir_priv *priv,
+				    struct clk_notifier_data *change)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+
+	dev_dbg(priv->dev, "clk changed %lu HZ -> %lu HZ\n",
+		change->old_rate, change->new_rate);
+
+	spin_lock_irq(&priv->lock);
+	if (hw->clk_hz == change->new_rate)
+		goto unlock;
+	hw->clk_hz = change->new_rate;
+	/* refresh current timings */
+	if (hw->decoder) {
+		img_ir_decoder_convert(hw->decoder, &hw->reg_timings,
+				       hw->clk_hz);
+		switch (hw->mode) {
+		case IMG_IR_M_NORMAL:
+			img_ir_write_timings(priv, &hw->reg_timings.timings,
+					     RC_FILTER_NORMAL);
+			break;
+		case IMG_IR_M_REPEATING:
+			img_ir_write_timings(priv, &hw->reg_timings.rtimings,
+					     RC_FILTER_NORMAL);
+			break;
+#ifdef CONFIG_PM_SLEEP
+		case IMG_IR_M_WAKE:
+			img_ir_write_timings(priv, &hw->reg_timings.timings,
+					     RC_FILTER_WAKEUP);
+			break;
+#endif
+		}
+	}
+unlock:
+	spin_unlock_irq(&priv->lock);
+}
+
+static int img_ir_clk_notify(struct notifier_block *self, unsigned long action,
+			     void *data)
+{
+	struct img_ir_priv *priv = container_of(self, struct img_ir_priv,
+						hw.clk_nb);
+	switch (action) {
+	case POST_RATE_CHANGE:
+		img_ir_change_frequency(priv, data);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+#endif /* CONFIG_COMMON_CLK */
+
+/* called with priv->lock held */
+void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	u32 ir_status, len, lw, up;
+	unsigned int ct;
+
+	/* use the current decoder */
+	if (!hw->decoder)
+		return;
+
+	ct = hw->decoder->control.code_type;
+
+	ir_status = img_ir_read(priv, IMG_IR_STATUS);
+	if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) {
+		if (!(priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_IRQ) ||
+				hw->stopping)
+			return;
+		/*
+		 * The below functionality is added as a work around to stop
+		 * multiple Interrupts generated when an incomplete IR code is
+		 * received by the decoder.
+		 * The decoder generates rapid interrupts without actually
+		 * having received any new data. After a single interrupt it's
+		 * expected to clear up, but instead multiple interrupts are
+		 * rapidly generated. only way to get out of this loop is to
+		 * reset the control register after a short delay.
+		 */
+		img_ir_write(priv, IMG_IR_CONTROL, 0);
+		hw->quirk_suspend_irq = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+		img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+			     hw->quirk_suspend_irq & IMG_IR_IRQ_EDGE);
+
+		/* Timer activated to re-enable the protocol. */
+		mod_timer(&hw->suspend_timer,
+			  jiffies + msecs_to_jiffies(5));
+		return;
+	}
+	ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2);
+	img_ir_write(priv, IMG_IR_STATUS, ir_status);
+
+	len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT;
+	/* some versions report wrong length for certain code types */
+	if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR)
+		++len;
+
+	lw = img_ir_read(priv, IMG_IR_DATA_LW);
+	up = img_ir_read(priv, IMG_IR_DATA_UP);
+	img_ir_handle_data(priv, len, (u64)up << 32 | lw);
+}
+
+void img_ir_setup_hw(struct img_ir_priv *priv)
+{
+	struct img_ir_decoder **decp;
+
+	if (!priv->hw.rdev)
+		return;
+
+	/* Use the first available decoder (or disable stuff if NULL) */
+	for (decp = img_ir_decoders; *decp; ++decp) {
+		const struct img_ir_decoder *dec = *decp;
+		if (img_ir_decoder_compatible(priv, dec)) {
+			img_ir_set_protocol(priv, dec->type);
+			img_ir_set_decoder(priv, dec, 0);
+			return;
+		}
+	}
+	img_ir_set_decoder(priv, NULL, 0);
+}
+
+/**
+ * img_ir_probe_hw_caps() - Probe capabilities of the hardware.
+ * @priv:	IR private data.
+ */
+static void img_ir_probe_hw_caps(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	/*
+	 * When a version of the block becomes available without these quirks,
+	 * they'll have to depend on the core revision.
+	 */
+	hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN]
+		|= IMG_IR_QUIRK_CODE_LEN_INCR;
+	hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE]
+		|= IMG_IR_QUIRK_CODE_IRQ;
+	hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS]
+		|= IMG_IR_QUIRK_CODE_BROKEN;
+}
+
+int img_ir_probe_hw(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	struct rc_dev *rdev;
+	int error;
+
+	/* Ensure hardware decoders have been preprocessed */
+	img_ir_init_decoders();
+
+	/* Probe hardware capabilities */
+	img_ir_probe_hw_caps(priv);
+
+	/* Set up the end timer */
+	timer_setup(&hw->end_timer, img_ir_end_timer, 0);
+	timer_setup(&hw->suspend_timer, img_ir_suspend_timer, 0);
+
+	/* Register a clock notifier */
+	if (!IS_ERR(priv->clk)) {
+		hw->clk_hz = clk_get_rate(priv->clk);
+#ifdef CONFIG_COMMON_CLK
+		hw->clk_nb.notifier_call = img_ir_clk_notify;
+		error = clk_notifier_register(priv->clk, &hw->clk_nb);
+		if (error)
+			dev_warn(priv->dev,
+				 "failed to register clock notifier\n");
+#endif
+	} else {
+		hw->clk_hz = 32768;
+	}
+
+	/* Allocate hardware decoder */
+	hw->rdev = rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!rdev) {
+		dev_err(priv->dev, "cannot allocate input device\n");
+		error = -ENOMEM;
+		goto err_alloc_rc;
+	}
+	rdev->priv = priv;
+	rdev->map_name = RC_MAP_EMPTY;
+	rdev->allowed_protocols = img_ir_allowed_protos(priv);
+	rdev->device_name = "IMG Infrared Decoder";
+	rdev->s_filter = img_ir_set_normal_filter;
+	rdev->s_wakeup_filter = img_ir_set_wakeup_filter;
+
+	/* Register hardware decoder */
+	error = rc_register_device(rdev);
+	if (error) {
+		dev_err(priv->dev, "failed to register IR input device\n");
+		goto err_register_rc;
+	}
+
+	/*
+	 * Set this after rc_register_device as no protocols have been
+	 * registered yet.
+	 */
+	rdev->change_protocol = img_ir_change_protocol;
+
+	device_init_wakeup(priv->dev, 1);
+
+	return 0;
+
+err_register_rc:
+	img_ir_set_decoder(priv, NULL, 0);
+	hw->rdev = NULL;
+	rc_free_device(rdev);
+err_alloc_rc:
+#ifdef CONFIG_COMMON_CLK
+	if (!IS_ERR(priv->clk))
+		clk_notifier_unregister(priv->clk, &hw->clk_nb);
+#endif
+	return error;
+}
+
+void img_ir_remove_hw(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_hw *hw = &priv->hw;
+	struct rc_dev *rdev = hw->rdev;
+	if (!rdev)
+		return;
+	img_ir_set_decoder(priv, NULL, 0);
+	hw->rdev = NULL;
+	rc_unregister_device(rdev);
+#ifdef CONFIG_COMMON_CLK
+	if (!IS_ERR(priv->clk))
+		clk_notifier_unregister(priv->clk, &hw->clk_nb);
+#endif
+}
+
+#ifdef CONFIG_PM_SLEEP
+int img_ir_suspend(struct device *dev)
+{
+	struct img_ir_priv *priv = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) && img_ir_enable_wake(priv))
+		enable_irq_wake(priv->irq);
+	return 0;
+}
+
+int img_ir_resume(struct device *dev)
+{
+	struct img_ir_priv *priv = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) && img_ir_disable_wake(priv))
+		disable_irq_wake(priv->irq);
+	return 0;
+}
+#endif	/* CONFIG_PM_SLEEP */
diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
new file mode 100644
index 000000000..952299038
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -0,0 +1,297 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ImgTec IR Hardware Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_HW_H_
+#define _IMG_IR_HW_H_
+
+#include <linux/kernel.h>
+#include <media/rc-core.h>
+
+/* constants */
+
+#define IMG_IR_CODETYPE_PULSELEN	0x0	/* Sony */
+#define IMG_IR_CODETYPE_PULSEDIST	0x1	/* NEC, Toshiba, Micom, Sharp */
+#define IMG_IR_CODETYPE_BIPHASE		0x2	/* RC-5/6 */
+#define IMG_IR_CODETYPE_2BITPULSEPOS	0x3	/* RC-MM */
+
+
+/* Timing information */
+
+/**
+ * struct img_ir_control - Decoder control settings
+ * @decoden:	Primary decoder enable
+ * @code_type:	Decode type (see IMG_IR_CODETYPE_*)
+ * @hdrtog:	Detect header toggle symbol after leader symbol
+ * @ldrdec:	Don't discard leader if maximum width reached
+ * @decodinpol:	Decoder input polarity (1=active high)
+ * @bitorien:	Bit orientation (1=MSB first)
+ * @d1validsel:	Decoder 2 takes over if it detects valid data
+ * @bitinv:	Bit inversion switch (1=don't invert)
+ * @decodend2:	Secondary decoder enable (no leader symbol)
+ * @bitoriend2:	Bit orientation (1=MSB first)
+ * @bitinvd2:	Secondary decoder bit inversion switch (1=don't invert)
+ */
+struct img_ir_control {
+	unsigned decoden:1;
+	unsigned code_type:2;
+	unsigned hdrtog:1;
+	unsigned ldrdec:1;
+	unsigned decodinpol:1;
+	unsigned bitorien:1;
+	unsigned d1validsel:1;
+	unsigned bitinv:1;
+	unsigned decodend2:1;
+	unsigned bitoriend2:1;
+	unsigned bitinvd2:1;
+};
+
+/**
+ * struct img_ir_timing_range - range of timing values
+ * @min:	Minimum timing value
+ * @max:	Maximum timing value (if < @min, this will be set to @min during
+ *		preprocessing step, so it is normally not explicitly initialised
+ *		and is taken care of by the tolerance)
+ */
+struct img_ir_timing_range {
+	u16 min;
+	u16 max;
+};
+
+/**
+ * struct img_ir_symbol_timing - timing data for a symbol
+ * @pulse:	Timing range for the length of the pulse in this symbol
+ * @space:	Timing range for the length of the space in this symbol
+ */
+struct img_ir_symbol_timing {
+	struct img_ir_timing_range pulse;
+	struct img_ir_timing_range space;
+};
+
+/**
+ * struct img_ir_free_timing - timing data for free time symbol
+ * @minlen:	Minimum number of bits of data
+ * @maxlen:	Maximum number of bits of data
+ * @ft_min:	Minimum free time after message
+ */
+struct img_ir_free_timing {
+	/* measured in bits */
+	u8 minlen;
+	u8 maxlen;
+	u16 ft_min;
+};
+
+/**
+ * struct img_ir_timings - Timing values.
+ * @ldr:	Leader symbol timing data
+ * @s00:	Zero symbol timing data for primary decoder
+ * @s01:	One symbol timing data for primary decoder
+ * @s10:	Zero symbol timing data for secondary (no leader symbol) decoder
+ * @s11:	One symbol timing data for secondary (no leader symbol) decoder
+ * @ft:		Free time symbol timing data
+ */
+struct img_ir_timings {
+	struct img_ir_symbol_timing ldr, s00, s01, s10, s11;
+	struct img_ir_free_timing ft;
+};
+
+/**
+ * struct img_ir_filter - Filter IR events.
+ * @data:	Data to match.
+ * @mask:	Mask of bits to compare.
+ * @minlen:	Additional minimum number of bits.
+ * @maxlen:	Additional maximum number of bits.
+ */
+struct img_ir_filter {
+	u64 data;
+	u64 mask;
+	u8 minlen;
+	u8 maxlen;
+};
+
+/**
+ * struct img_ir_timing_regvals - Calculated timing register values.
+ * @ldr:	Leader symbol timing register value
+ * @s00:	Zero symbol timing register value for primary decoder
+ * @s01:	One symbol timing register value for primary decoder
+ * @s10:	Zero symbol timing register value for secondary decoder
+ * @s11:	One symbol timing register value for secondary decoder
+ * @ft:		Free time symbol timing register value
+ */
+struct img_ir_timing_regvals {
+	u32 ldr, s00, s01, s10, s11, ft;
+};
+
+#define IMG_IR_SCANCODE		0	/* new scancode */
+#define IMG_IR_REPEATCODE	1	/* repeat the previous code */
+
+/**
+ * struct img_ir_scancode_req - Scancode request data.
+ * @protocol:	Protocol code of received message (defaults to
+ *		RC_PROTO_UNKNOWN).
+ * @scancode:	Scan code of received message (must be written by
+ *		handler if IMG_IR_SCANCODE is returned).
+ * @toggle:	Toggle bit (defaults to 0).
+ */
+struct img_ir_scancode_req {
+	enum rc_proto protocol;
+	u32 scancode;
+	u8 toggle;
+};
+
+/**
+ * struct img_ir_decoder - Decoder settings for an IR protocol.
+ * @type:	Protocol types bitmap.
+ * @tolerance:	Timing tolerance as a percentage (default 10%).
+ * @unit:	Unit of timings in nanoseconds (default 1 us).
+ * @timings:	Primary timings
+ * @rtimings:	Additional override timings while waiting for repeats.
+ * @repeat:	Maximum repeat interval (always in milliseconds).
+ * @control:	Control flags.
+ *
+ * @scancode:	Pointer to function to convert the IR data into a scancode (it
+ *		must be safe to execute in interrupt context).
+ *		Returns IMG_IR_SCANCODE to emit new scancode.
+ *		Returns IMG_IR_REPEATCODE to repeat previous code.
+ *		Returns -errno (e.g. -EINVAL) on error.
+ * @filter:	Pointer to function to convert scancode filter to raw hardware
+ *		filter. The minlen and maxlen fields will have been initialised
+ *		to the maximum range.
+ */
+struct img_ir_decoder {
+	/* core description */
+	u64				type;
+	unsigned int			tolerance;
+	unsigned int			unit;
+	struct img_ir_timings		timings;
+	struct img_ir_timings		rtimings;
+	unsigned int			repeat;
+	struct img_ir_control		control;
+
+	/* scancode logic */
+	int (*scancode)(int len, u64 raw, u64 enabled_protocols,
+			struct img_ir_scancode_req *request);
+	int (*filter)(const struct rc_scancode_filter *in,
+		      struct img_ir_filter *out, u64 protocols);
+};
+
+extern struct img_ir_decoder img_ir_nec;
+extern struct img_ir_decoder img_ir_jvc;
+extern struct img_ir_decoder img_ir_sony;
+extern struct img_ir_decoder img_ir_sharp;
+extern struct img_ir_decoder img_ir_sanyo;
+extern struct img_ir_decoder img_ir_rc5;
+extern struct img_ir_decoder img_ir_rc6;
+
+/**
+ * struct img_ir_reg_timings - Reg values for decoder timings at clock rate.
+ * @ctrl:	Processed control register value.
+ * @timings:	Processed primary timings.
+ * @rtimings:	Processed repeat timings.
+ */
+struct img_ir_reg_timings {
+	u32				ctrl;
+	struct img_ir_timing_regvals	timings;
+	struct img_ir_timing_regvals	rtimings;
+};
+
+struct img_ir_priv;
+
+#ifdef CONFIG_IR_IMG_HW
+
+enum img_ir_mode {
+	IMG_IR_M_NORMAL,
+	IMG_IR_M_REPEATING,
+#ifdef CONFIG_PM_SLEEP
+	IMG_IR_M_WAKE,
+#endif
+};
+
+/**
+ * struct img_ir_priv_hw - Private driver data for hardware decoder.
+ * @ct_quirks:		Quirk bits for each code type.
+ * @rdev:		Remote control device
+ * @clk_nb:		Notifier block for clock notify events.
+ * @end_timer:		Timer until repeat timeout.
+ * @suspend_timer:	Timer to re-enable protocol.
+ * @decoder:		Current decoder settings.
+ * @enabled_protocols:	Currently enabled protocols.
+ * @clk_hz:		Current core clock rate in Hz.
+ * @reg_timings:	Timing reg values for decoder at clock rate.
+ * @flags:		IMG_IR_F_*.
+ * @filters:		HW filters (derived from scancode filters).
+ * @mode:		Current decode mode.
+ * @stopping:		Indicates that decoder is being taken down and timers
+ *			should not be restarted.
+ * @suspend_irqen:	Saved IRQ enable mask over suspend.
+ * @quirk_suspend_irq:	Saved IRQ enable mask over quirk suspend timer.
+ */
+struct img_ir_priv_hw {
+	unsigned int			ct_quirks[4];
+	struct rc_dev			*rdev;
+	struct notifier_block		clk_nb;
+	struct timer_list		end_timer;
+	struct timer_list		suspend_timer;
+	const struct img_ir_decoder	*decoder;
+	u64				enabled_protocols;
+	unsigned long			clk_hz;
+	struct img_ir_reg_timings	reg_timings;
+	unsigned int			flags;
+	struct img_ir_filter		filters[RC_FILTER_MAX];
+
+	enum img_ir_mode		mode;
+	bool				stopping;
+	u32				suspend_irqen;
+	u32				quirk_suspend_irq;
+};
+
+static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
+{
+	return hw->rdev;
+};
+
+void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status);
+void img_ir_setup_hw(struct img_ir_priv *priv);
+int img_ir_probe_hw(struct img_ir_priv *priv);
+void img_ir_remove_hw(struct img_ir_priv *priv);
+
+#ifdef CONFIG_PM_SLEEP
+int img_ir_suspend(struct device *dev);
+int img_ir_resume(struct device *dev);
+#else
+#define img_ir_suspend NULL
+#define img_ir_resume NULL
+#endif
+
+#else
+
+struct img_ir_priv_hw {
+};
+
+static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
+{
+	return false;
+};
+static inline void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
+{
+}
+static inline void img_ir_setup_hw(struct img_ir_priv *priv)
+{
+}
+static inline int img_ir_probe_hw(struct img_ir_priv *priv)
+{
+	return -ENODEV;
+}
+static inline void img_ir_remove_hw(struct img_ir_priv *priv)
+{
+}
+
+#define img_ir_suspend NULL
+#define img_ir_resume NULL
+
+#endif /* CONFIG_IR_IMG_HW */
+
+#endif /* _IMG_IR_HW_H_ */
diff --git a/drivers/media/rc/img-ir/img-ir-jvc.c b/drivers/media/rc/img-ir/img-ir-jvc.c
new file mode 100644
index 000000000..0fc5e6e45
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-jvc.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for JVC protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert JVC data to a scancode */
+static int img_ir_jvc_scancode(int len, u64 raw, u64 enabled_protocols,
+			       struct img_ir_scancode_req *request)
+{
+	unsigned int cust, data;
+
+	if (len != 16)
+		return -EINVAL;
+
+	cust = (raw >> 0) & 0xff;
+	data = (raw >> 8) & 0xff;
+
+	request->protocol = RC_PROTO_JVC;
+	request->scancode = cust << 8 | data;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert JVC scancode to JVC data filter */
+static int img_ir_jvc_filter(const struct rc_scancode_filter *in,
+			     struct img_ir_filter *out, u64 protocols)
+{
+	unsigned int cust, data;
+	unsigned int cust_m, data_m;
+
+	cust   = (in->data >> 8) & 0xff;
+	cust_m = (in->mask >> 8) & 0xff;
+	data   = (in->data >> 0) & 0xff;
+	data_m = (in->mask >> 0) & 0xff;
+
+	out->data = cust   | data << 8;
+	out->mask = cust_m | data_m << 8;
+
+	return 0;
+}
+
+/*
+ * JVC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/jvc.php
+ *          http://support.jvc.com/consumer/support/documents/RemoteCodes.pdf
+ */
+struct img_ir_decoder img_ir_jvc = {
+	.type = RC_PROTO_BIT_JVC,
+	.control = {
+		.decoden = 1,
+		.code_type = IMG_IR_CODETYPE_PULSEDIST,
+	},
+	/* main timings */
+	.unit = 527500, /* 527.5 us */
+	.timings = {
+		/* leader symbol */
+		.ldr = {
+			.pulse = { 16	/* 8.44 ms */ },
+			.space = { 8	/* 4.22 ms */ },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse = { 1	/* 527.5 us +-60 us */ },
+			.space = { 1	/* 527.5 us */ },
+		},
+		/* 1 symbol */
+		.s01 = {
+			.pulse = { 1	/* 527.5 us +-60 us */ },
+			.space = { 3	/* 1.5825 ms +-40 us */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 16,
+			.maxlen = 16,
+			.ft_min = 10,	/* 5.275 ms */
+		},
+	},
+	/* scancode logic */
+	.scancode = img_ir_jvc_scancode,
+	.filter = img_ir_jvc_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-nec.c b/drivers/media/rc/img-ir/img-ir-nec.c
new file mode 100644
index 000000000..c01e30bb6
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-nec.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for NEC protocol.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+#include <linux/bitrev.h>
+#include <linux/log2.h>
+
+/* Convert NEC data to a scancode */
+static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols,
+			       struct img_ir_scancode_req *request)
+{
+	unsigned int addr, addr_inv, data, data_inv;
+	/* a repeat code has no data */
+	if (!len)
+		return IMG_IR_REPEATCODE;
+	if (len != 32)
+		return -EINVAL;
+	/* raw encoding: ddDDaaAA */
+	addr     = (raw >>  0) & 0xff;
+	addr_inv = (raw >>  8) & 0xff;
+	data     = (raw >> 16) & 0xff;
+	data_inv = (raw >> 24) & 0xff;
+	if ((data_inv ^ data) != 0xff) {
+		/* 32-bit NEC (used by Apple and TiVo remotes) */
+		/* scan encoding: as transmitted, MSBit = first received bit */
+		request->scancode = bitrev8(addr)     << 24 |
+				bitrev8(addr_inv) << 16 |
+				bitrev8(data)     <<  8 |
+				bitrev8(data_inv);
+		request->protocol = RC_PROTO_NEC32;
+	} else if ((addr_inv ^ addr) != 0xff) {
+		/* Extended NEC */
+		/* scan encoding: AAaaDD */
+		request->scancode = addr     << 16 |
+				addr_inv <<  8 |
+				data;
+		request->protocol = RC_PROTO_NECX;
+	} else {
+		/* Normal NEC */
+		/* scan encoding: AADD */
+		request->scancode = addr << 8 |
+				data;
+		request->protocol = RC_PROTO_NEC;
+	}
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert NEC scancode to NEC data filter */
+static int img_ir_nec_filter(const struct rc_scancode_filter *in,
+			     struct img_ir_filter *out, u64 protocols)
+{
+	unsigned int addr, addr_inv, data, data_inv;
+	unsigned int addr_m, addr_inv_m, data_m, data_inv_m;
+
+	data       = in->data & 0xff;
+	data_m     = in->mask & 0xff;
+
+	protocols &= RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32;
+
+	/*
+	 * If only one bit is set, we were requested to do an exact
+	 * protocol. This should be the case for wakeup filters; for
+	 * normal filters, guess the protocol from the scancode.
+	 */
+	if (!is_power_of_2(protocols)) {
+		if ((in->data | in->mask) & 0xff000000)
+			protocols = RC_PROTO_BIT_NEC32;
+		else if ((in->data | in->mask) & 0x00ff0000)
+			protocols = RC_PROTO_BIT_NECX;
+		else
+			protocols = RC_PROTO_BIT_NEC;
+	}
+
+	if (protocols == RC_PROTO_BIT_NEC32) {
+		/* 32-bit NEC (used by Apple and TiVo remotes) */
+		/* scan encoding: as transmitted, MSBit = first received bit */
+		addr       = bitrev8(in->data >> 24);
+		addr_m     = bitrev8(in->mask >> 24);
+		addr_inv   = bitrev8(in->data >> 16);
+		addr_inv_m = bitrev8(in->mask >> 16);
+		data       = bitrev8(in->data >>  8);
+		data_m     = bitrev8(in->mask >>  8);
+		data_inv   = bitrev8(in->data >>  0);
+		data_inv_m = bitrev8(in->mask >>  0);
+	} else if (protocols == RC_PROTO_BIT_NECX) {
+		/* Extended NEC */
+		/* scan encoding AAaaDD */
+		addr       = (in->data >> 16) & 0xff;
+		addr_m     = (in->mask >> 16) & 0xff;
+		addr_inv   = (in->data >>  8) & 0xff;
+		addr_inv_m = (in->mask >>  8) & 0xff;
+		data_inv   = data ^ 0xff;
+		data_inv_m = data_m;
+	} else {
+		/* Normal NEC */
+		/* scan encoding: AADD */
+		addr       = (in->data >>  8) & 0xff;
+		addr_m     = (in->mask >>  8) & 0xff;
+		addr_inv   = addr ^ 0xff;
+		addr_inv_m = addr_m;
+		data_inv   = data ^ 0xff;
+		data_inv_m = data_m;
+	}
+
+	/* raw encoding: ddDDaaAA */
+	out->data = data_inv << 24 |
+		    data     << 16 |
+		    addr_inv <<  8 |
+		    addr;
+	out->mask = data_inv_m << 24 |
+		    data_m     << 16 |
+		    addr_inv_m <<  8 |
+		    addr_m;
+	return 0;
+}
+
+/*
+ * NEC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/nec.php
+ *        http://wiki.altium.com/display/ADOH/NEC+Infrared+Transmission+Protocol
+ */
+struct img_ir_decoder img_ir_nec = {
+	.type = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32,
+	.control = {
+		.decoden = 1,
+		.code_type = IMG_IR_CODETYPE_PULSEDIST,
+	},
+	/* main timings */
+	.unit = 562500, /* 562.5 us */
+	.timings = {
+		/* leader symbol */
+		.ldr = {
+			.pulse = { 16	/* 9ms */ },
+			.space = { 8	/* 4.5ms */ },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse = { 1	/* 562.5 us */ },
+			.space = { 1	/* 562.5 us */ },
+		},
+		/* 1 symbol */
+		.s01 = {
+			.pulse = { 1	/* 562.5 us */ },
+			.space = { 3	/* 1687.5 us */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 32,
+			.maxlen = 32,
+			.ft_min = 10,	/* 5.625 ms */
+		},
+	},
+	/* repeat codes */
+	.repeat = 108,			/* 108 ms */
+	.rtimings = {
+		/* leader symbol */
+		.ldr = {
+			.space = { 4	/* 2.25 ms */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 0,	/* repeat code has no data */
+			.maxlen = 0,
+		},
+	},
+	/* scancode logic */
+	.scancode = img_ir_nec_scancode,
+	.filter = img_ir_nec_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-raw.c b/drivers/media/rc/img-ir/img-ir-raw.c
new file mode 100644
index 000000000..8b0bdd960
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-raw.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Raw Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This ties into the input subsystem using the RC-core in raw mode. Raw IR
+ * signal edges are reported and decoded by generic software decoders.
+ */
+
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+#include "img-ir.h"
+
+#define ECHO_TIMEOUT_MS 150	/* ms between echos */
+
+/* must be called with priv->lock held */
+static void img_ir_refresh_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+	struct rc_dev *rc_dev = priv->raw.rdev;
+	int multiple;
+	u32 ir_status;
+
+	/* find whether both rise and fall was detected */
+	multiple = ((irq_status & IMG_IR_IRQ_EDGE) == IMG_IR_IRQ_EDGE);
+	/*
+	 * If so, we need to see if the level has actually changed.
+	 * If it's just noise that we didn't have time to process,
+	 * there's no point reporting it.
+	 */
+	ir_status = img_ir_read(priv, IMG_IR_STATUS) & IMG_IR_IRRXD;
+	if (multiple && ir_status == raw->last_status)
+		return;
+	raw->last_status = ir_status;
+
+	/* report the edge to the IR raw decoders */
+	if (ir_status) /* low */
+		ir_raw_event_store_edge(rc_dev, false);
+	else /* high */
+		ir_raw_event_store_edge(rc_dev, true);
+	ir_raw_event_handle(rc_dev);
+}
+
+/* called with priv->lock held */
+void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+
+	/* check not removing */
+	if (!raw->rdev)
+		return;
+
+	img_ir_refresh_raw(priv, irq_status);
+
+	/* start / push back the echo timer */
+	mod_timer(&raw->timer, jiffies + msecs_to_jiffies(ECHO_TIMEOUT_MS));
+}
+
+/*
+ * Echo timer callback function.
+ * The raw decoders expect to get a final sample even if there are no edges, in
+ * order to be assured of the final space. If there are no edges for a certain
+ * time we use this timer to emit a final sample to satisfy them.
+ */
+static void img_ir_echo_timer(struct timer_list *t)
+{
+	struct img_ir_priv *priv = from_timer(priv, t, raw.timer);
+
+	spin_lock_irq(&priv->lock);
+
+	/* check not removing */
+	if (priv->raw.rdev)
+		/*
+		 * It's safe to pass irq_status=0 since it's only used to check
+		 * for double edges.
+		 */
+		img_ir_refresh_raw(priv, 0);
+
+	spin_unlock_irq(&priv->lock);
+}
+
+void img_ir_setup_raw(struct img_ir_priv *priv)
+{
+	u32 irq_en;
+
+	if (!priv->raw.rdev)
+		return;
+
+	/* clear and enable edge interrupts */
+	spin_lock_irq(&priv->lock);
+	irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+	irq_en |= IMG_IR_IRQ_EDGE;
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE);
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+	spin_unlock_irq(&priv->lock);
+}
+
+int img_ir_probe_raw(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+	struct rc_dev *rdev;
+	int error;
+
+	/* Set up the echo timer */
+	timer_setup(&raw->timer, img_ir_echo_timer, 0);
+
+	/* Allocate raw decoder */
+	raw->rdev = rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
+	if (!rdev) {
+		dev_err(priv->dev, "cannot allocate raw input device\n");
+		return -ENOMEM;
+	}
+	rdev->priv = priv;
+	rdev->map_name = RC_MAP_EMPTY;
+	rdev->device_name = "IMG Infrared Decoder Raw";
+
+	/* Register raw decoder */
+	error = rc_register_device(rdev);
+	if (error) {
+		dev_err(priv->dev, "failed to register raw IR input device\n");
+		rc_free_device(rdev);
+		raw->rdev = NULL;
+		return error;
+	}
+
+	return 0;
+}
+
+void img_ir_remove_raw(struct img_ir_priv *priv)
+{
+	struct img_ir_priv_raw *raw = &priv->raw;
+	struct rc_dev *rdev = raw->rdev;
+	u32 irq_en;
+
+	if (!rdev)
+		return;
+
+	/* switch off and disable raw (edge) interrupts */
+	spin_lock_irq(&priv->lock);
+	raw->rdev = NULL;
+	irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+	irq_en &= ~IMG_IR_IRQ_EDGE;
+	img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+	img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE);
+	spin_unlock_irq(&priv->lock);
+
+	rc_unregister_device(rdev);
+
+	del_timer_sync(&raw->timer);
+}
diff --git a/drivers/media/rc/img-ir/img-ir-raw.h b/drivers/media/rc/img-ir/img-ir-raw.h
new file mode 100644
index 000000000..0441af70d
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-raw.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ImgTec IR Raw Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_RAW_H_
+#define _IMG_IR_RAW_H_
+
+struct img_ir_priv;
+
+#ifdef CONFIG_IR_IMG_RAW
+
+/**
+ * struct img_ir_priv_raw - Private driver data for raw decoder.
+ * @rdev:		Raw remote control device
+ * @timer:		Timer to echo samples to keep soft decoders happy.
+ * @last_status:	Last raw status bits.
+ */
+struct img_ir_priv_raw {
+	struct rc_dev		*rdev;
+	struct timer_list	timer;
+	u32			last_status;
+};
+
+static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw)
+{
+	return raw->rdev;
+};
+
+void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status);
+void img_ir_setup_raw(struct img_ir_priv *priv);
+int img_ir_probe_raw(struct img_ir_priv *priv);
+void img_ir_remove_raw(struct img_ir_priv *priv);
+
+#else
+
+struct img_ir_priv_raw {
+};
+static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw)
+{
+	return false;
+};
+static inline void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+}
+static inline void img_ir_setup_raw(struct img_ir_priv *priv)
+{
+}
+static inline int img_ir_probe_raw(struct img_ir_priv *priv)
+{
+	return -ENODEV;
+}
+static inline void img_ir_remove_raw(struct img_ir_priv *priv)
+{
+}
+
+#endif /* CONFIG_IR_IMG_RAW */
+
+#endif /* _IMG_IR_RAW_H_ */
diff --git a/drivers/media/rc/img-ir/img-ir-rc5.c b/drivers/media/rc/img-ir/img-ir-rc5.c
new file mode 100644
index 000000000..23c8e2397
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc5.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Philips RC-5 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC5 data to a scancode */
+static int img_ir_rc5_scancode(int len, u64 raw, u64 enabled_protocols,
+				struct img_ir_scancode_req *request)
+{
+	unsigned int addr, cmd, tgl, start;
+
+	/* Quirk in the decoder shifts everything by 2 to the left. */
+	raw   >>= 2;
+
+	start	=  (raw >> 13)	& 0x01;
+	tgl	=  (raw >> 11)	& 0x01;
+	addr	=  (raw >>  6)	& 0x1f;
+	cmd	=   raw		& 0x3f;
+	/*
+	 * 12th bit is used to extend the command in extended RC5 and has
+	 * no effect on standard RC5.
+	 */
+	cmd	+= ((raw >> 12) & 0x01) ? 0 : 0x40;
+
+	if (!start)
+		return -EINVAL;
+
+	request->protocol = RC_PROTO_RC5;
+	request->scancode = addr << 8 | cmd;
+	request->toggle   = tgl;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert RC5 scancode to RC5 data filter */
+static int img_ir_rc5_filter(const struct rc_scancode_filter *in,
+				 struct img_ir_filter *out, u64 protocols)
+{
+	/* Not supported by the hw. */
+	return -EINVAL;
+}
+
+/*
+ * RC-5 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc5.php
+ */
+struct img_ir_decoder img_ir_rc5 = {
+	.type      = RC_PROTO_BIT_RC5,
+	.control   = {
+		.bitoriend2	= 1,
+		.code_type	= IMG_IR_CODETYPE_BIPHASE,
+		.decodend2	= 1,
+	},
+	/* main timings */
+	.tolerance	= 16,
+	.unit		= 888888, /* 1/36k*32=888.888microseconds */
+	.timings	= {
+		/* 10 symbol */
+		.s10 = {
+			.pulse	= { 1 },
+			.space	= { 1 },
+		},
+
+		/* 11 symbol */
+		.s11 = {
+			.pulse	= { 1 },
+			.space	= { 1 },
+		},
+
+		/* free time */
+		.ft  = {
+			.minlen = 14,
+			.maxlen = 14,
+			.ft_min = 5,
+		},
+	},
+
+	/* scancode logic */
+	.scancode	= img_ir_rc5_scancode,
+	.filter		= img_ir_rc5_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-rc6.c b/drivers/media/rc/img-ir/img-ir-rc6.c
new file mode 100644
index 000000000..b2bf46886
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc6.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Philips RC-6 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC6 data to a scancode */
+static int img_ir_rc6_scancode(int len, u64 raw, u64 enabled_protocols,
+				struct img_ir_scancode_req *request)
+{
+	unsigned int addr, cmd, mode, trl1, trl2;
+
+	/*
+	 * Due to a side effect of the decoder handling the double length
+	 * Trailer bit, the header information is a bit scrambled, and the
+	 * raw data is shifted incorrectly.
+	 * This workaround effectively recovers the header bits.
+	 *
+	 * The Header field should look like this:
+	 *
+	 * StartBit ModeBit2 ModeBit1 ModeBit0 TrailerBit
+	 *
+	 * But what we get is:
+	 *
+	 * ModeBit2 ModeBit1 ModeBit0 TrailerBit1 TrailerBit2
+	 *
+	 * The start bit is not important to recover the scancode.
+	 */
+
+	raw	>>= 27;
+
+	trl1	= (raw >>  17)	& 0x01;
+	trl2	= (raw >>  16)	& 0x01;
+
+	mode	= (raw >>  18)	& 0x07;
+	addr	= (raw >>   8)	& 0xff;
+	cmd	=  raw		& 0xff;
+
+	/*
+	 * Due to the above explained irregularity the trailer bits cannot
+	 * have the same value.
+	 */
+	if (trl1 == trl2)
+		return -EINVAL;
+
+	/* Only mode 0 supported for now */
+	if (mode)
+		return -EINVAL;
+
+	request->protocol = RC_PROTO_RC6_0;
+	request->scancode = addr << 8 | cmd;
+	request->toggle	  = trl2;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert RC6 scancode to RC6 data filter */
+static int img_ir_rc6_filter(const struct rc_scancode_filter *in,
+				 struct img_ir_filter *out, u64 protocols)
+{
+	/* Not supported by the hw. */
+	return -EINVAL;
+}
+
+/*
+ * RC-6 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc6.php
+ */
+struct img_ir_decoder img_ir_rc6 = {
+	.type		= RC_PROTO_BIT_RC6_0,
+	.control	= {
+		.bitorien	= 1,
+		.code_type	= IMG_IR_CODETYPE_BIPHASE,
+		.decoden	= 1,
+		.decodinpol	= 1,
+	},
+	/* main timings */
+	.tolerance	= 20,
+	/*
+	 * Due to a quirk in the img-ir decoder, default header values do
+	 * not work, the values described below were extracted from
+	 * successful RTL test cases.
+	 */
+	.timings	= {
+		/* leader symbol */
+		.ldr = {
+			.pulse	= { 650 },
+			.space	= { 660 },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse	= { 370 },
+			.space	= { 370 },
+		},
+		/* 01 symbol */
+		.s01 = {
+			.pulse	= { 370 },
+			.space	= { 370 },
+		},
+		/* free time */
+		.ft  = {
+			.minlen = 21,
+			.maxlen = 21,
+			.ft_min = 2666,	/* 2.666 ms */
+		},
+	},
+
+	/* scancode logic */
+	.scancode	= img_ir_rc6_scancode,
+	.filter		= img_ir_rc6_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sanyo.c b/drivers/media/rc/img-ir/img-ir-sanyo.c
new file mode 100644
index 000000000..16e1f4144
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-sanyo.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Sanyo protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * From ir-sanyo-decoder.c:
+ *
+ * This protocol uses the NEC protocol timings. However, data is formatted as:
+ *	13 bits Custom Code
+ *	13 bits NOT(Custom Code)
+ *	8 bits Key data
+ *	8 bits NOT(Key data)
+ *
+ * According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon
+ * Information for this protocol is available at the Sanyo LC7461 datasheet.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sanyo data to a scancode */
+static int img_ir_sanyo_scancode(int len, u64 raw, u64 enabled_protocols,
+				 struct img_ir_scancode_req *request)
+{
+	unsigned int addr, addr_inv, data, data_inv;
+	/* a repeat code has no data */
+	if (!len)
+		return IMG_IR_REPEATCODE;
+	if (len != 42)
+		return -EINVAL;
+	addr     = (raw >>  0) & 0x1fff;
+	addr_inv = (raw >> 13) & 0x1fff;
+	data     = (raw >> 26) & 0xff;
+	data_inv = (raw >> 34) & 0xff;
+	/* Validate data */
+	if ((data_inv ^ data) != 0xff)
+		return -EINVAL;
+	/* Validate address */
+	if ((addr_inv ^ addr) != 0x1fff)
+		return -EINVAL;
+
+	/* Normal Sanyo */
+	request->protocol = RC_PROTO_SANYO;
+	request->scancode = addr << 8 | data;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert Sanyo scancode to Sanyo data filter */
+static int img_ir_sanyo_filter(const struct rc_scancode_filter *in,
+			       struct img_ir_filter *out, u64 protocols)
+{
+	unsigned int addr, addr_inv, data, data_inv;
+	unsigned int addr_m, data_m;
+
+	data = in->data & 0xff;
+	data_m = in->mask & 0xff;
+	data_inv = data ^ 0xff;
+
+	if (in->data & 0xff700000)
+		return -EINVAL;
+
+	addr       = (in->data >> 8) & 0x1fff;
+	addr_m     = (in->mask >> 8) & 0x1fff;
+	addr_inv   = addr ^ 0x1fff;
+
+	out->data = (u64)data_inv << 34 |
+		    (u64)data     << 26 |
+			 addr_inv << 13 |
+			 addr;
+	out->mask = (u64)data_m << 34 |
+		    (u64)data_m << 26 |
+			 addr_m << 13 |
+			 addr_m;
+	return 0;
+}
+
+/* Sanyo decoder */
+struct img_ir_decoder img_ir_sanyo = {
+	.type = RC_PROTO_BIT_SANYO,
+	.control = {
+		.decoden = 1,
+		.code_type = IMG_IR_CODETYPE_PULSEDIST,
+	},
+	/* main timings */
+	.unit = 562500, /* 562.5 us */
+	.timings = {
+		/* leader symbol */
+		.ldr = {
+			.pulse = { 16	/* 9ms */ },
+			.space = { 8	/* 4.5ms */ },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse = { 1	/* 562.5 us */ },
+			.space = { 1	/* 562.5 us */ },
+		},
+		/* 1 symbol */
+		.s01 = {
+			.pulse = { 1	/* 562.5 us */ },
+			.space = { 3	/* 1687.5 us */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 42,
+			.maxlen = 42,
+			.ft_min = 10,	/* 5.625 ms */
+		},
+	},
+	/* repeat codes */
+	.repeat = 108,			/* 108 ms */
+	.rtimings = {
+		/* leader symbol */
+		.ldr = {
+			.space = { 4	/* 2.25 ms */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 0,	/* repeat code has no data */
+			.maxlen = 0,
+		},
+	},
+	/* scancode logic */
+	.scancode = img_ir_sanyo_scancode,
+	.filter = img_ir_sanyo_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sharp.c b/drivers/media/rc/img-ir/img-ir-sharp.c
new file mode 100644
index 000000000..ce5d1a0df
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-sharp.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Sharp protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sharp data to a scancode */
+static int img_ir_sharp_scancode(int len, u64 raw, u64 enabled_protocols,
+				 struct img_ir_scancode_req *request)
+{
+	unsigned int addr, cmd, exp, chk;
+
+	if (len != 15)
+		return -EINVAL;
+
+	addr = (raw >>   0) & 0x1f;
+	cmd  = (raw >>   5) & 0xff;
+	exp  = (raw >>  13) &  0x1;
+	chk  = (raw >>  14) &  0x1;
+
+	/* validate data */
+	if (!exp)
+		return -EINVAL;
+	if (chk)
+		/* probably the second half of the message */
+		return -EINVAL;
+
+	request->protocol = RC_PROTO_SHARP;
+	request->scancode = addr << 8 | cmd;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert Sharp scancode to Sharp data filter */
+static int img_ir_sharp_filter(const struct rc_scancode_filter *in,
+			       struct img_ir_filter *out, u64 protocols)
+{
+	unsigned int addr, cmd, exp = 0, chk = 0;
+	unsigned int addr_m, cmd_m, exp_m = 0, chk_m = 0;
+
+	addr   = (in->data >> 8) & 0x1f;
+	addr_m = (in->mask >> 8) & 0x1f;
+	cmd    = (in->data >> 0) & 0xff;
+	cmd_m  = (in->mask >> 0) & 0xff;
+	if (cmd_m) {
+		/* if filtering commands, we can only match the first part */
+		exp   = 1;
+		exp_m = 1;
+		chk   = 0;
+		chk_m = 1;
+	}
+
+	out->data = addr        |
+		    cmd   <<  5 |
+		    exp   << 13 |
+		    chk   << 14;
+	out->mask = addr_m      |
+		    cmd_m <<  5 |
+		    exp_m << 13 |
+		    chk_m << 14;
+
+	return 0;
+}
+
+/*
+ * Sharp decoder
+ * See also http://www.sbprojects.com/knowledge/ir/sharp.php
+ */
+struct img_ir_decoder img_ir_sharp = {
+	.type = RC_PROTO_BIT_SHARP,
+	.control = {
+		.decoden = 0,
+		.decodend2 = 1,
+		.code_type = IMG_IR_CODETYPE_PULSEDIST,
+		.d1validsel = 1,
+	},
+	/* main timings */
+	.tolerance = 20,	/* 20% */
+	.timings = {
+		/* 0 symbol */
+		.s10 = {
+			.pulse = { 320	/* 320 us */ },
+			.space = { 680	/* 1 ms period */ },
+		},
+		/* 1 symbol */
+		.s11 = {
+			.pulse = { 320	/* 320 us */ },
+			.space = { 1680	/* 2 ms period */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 15,
+			.maxlen = 15,
+			.ft_min = 5000,	/* 5 ms */
+		},
+	},
+	/* scancode logic */
+	.scancode = img_ir_sharp_scancode,
+	.filter = img_ir_sharp_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sony.c b/drivers/media/rc/img-ir/img-ir-sony.c
new file mode 100644
index 000000000..dd46c0b71
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-sony.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Sony (SIRC) protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sony data to a scancode */
+static int img_ir_sony_scancode(int len, u64 raw, u64 enabled_protocols,
+				struct img_ir_scancode_req *request)
+{
+	unsigned int dev, subdev, func;
+
+	switch (len) {
+	case 12:
+		if (!(enabled_protocols & RC_PROTO_BIT_SONY12))
+			return -EINVAL;
+		func   = raw & 0x7f;	/* first 7 bits */
+		raw    >>= 7;
+		dev    = raw & 0x1f;	/* next 5 bits */
+		subdev = 0;
+		request->protocol = RC_PROTO_SONY12;
+		break;
+	case 15:
+		if (!(enabled_protocols & RC_PROTO_BIT_SONY15))
+			return -EINVAL;
+		func   = raw & 0x7f;	/* first 7 bits */
+		raw    >>= 7;
+		dev    = raw & 0xff;	/* next 8 bits */
+		subdev = 0;
+		request->protocol = RC_PROTO_SONY15;
+		break;
+	case 20:
+		if (!(enabled_protocols & RC_PROTO_BIT_SONY20))
+			return -EINVAL;
+		func   = raw & 0x7f;	/* first 7 bits */
+		raw    >>= 7;
+		dev    = raw & 0x1f;	/* next 5 bits */
+		raw    >>= 5;
+		subdev = raw & 0xff;	/* next 8 bits */
+		request->protocol = RC_PROTO_SONY20;
+		break;
+	default:
+		return -EINVAL;
+	}
+	request->scancode = dev << 16 | subdev << 8 | func;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert NEC scancode to NEC data filter */
+static int img_ir_sony_filter(const struct rc_scancode_filter *in,
+			      struct img_ir_filter *out, u64 protocols)
+{
+	unsigned int dev, subdev, func;
+	unsigned int dev_m, subdev_m, func_m;
+	unsigned int len = 0;
+
+	dev      = (in->data >> 16) & 0xff;
+	dev_m    = (in->mask >> 16) & 0xff;
+	subdev   = (in->data >> 8)  & 0xff;
+	subdev_m = (in->mask >> 8)  & 0xff;
+	func     = (in->data >> 0)  & 0x7f;
+	func_m   = (in->mask >> 0)  & 0x7f;
+
+	protocols &= RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 |
+							RC_PROTO_BIT_SONY20;
+
+	/*
+	 * If only one bit is set, we were requested to do an exact
+	 * protocol. This should be the case for wakeup filters; for
+	 * normal filters, guess the protocol from the scancode.
+	 */
+	if (!is_power_of_2(protocols)) {
+		if (subdev & subdev_m)
+			protocols = RC_PROTO_BIT_SONY20;
+		else if (dev & dev_m & 0xe0)
+			protocols = RC_PROTO_BIT_SONY15;
+		else
+			protocols = RC_PROTO_BIT_SONY12;
+	}
+
+	if (protocols == RC_PROTO_BIT_SONY20) {
+		/* can't encode subdev and higher device bits */
+		if (dev & dev_m & 0xe0)
+			return -EINVAL;
+		len = 20;
+		dev_m &= 0x1f;
+	} else if (protocols == RC_PROTO_BIT_SONY15) {
+		len = 15;
+		subdev_m = 0;
+	} else {
+		/*
+		 * The hardware mask cannot distinguish high device bits and low
+		 * extended bits, so logically AND those bits of the masks
+		 * together.
+		 */
+		subdev_m &= (dev_m >> 5) | 0xf8;
+		dev_m &= 0x1f;
+	}
+
+	/* ensure there aren't any bits straying between fields */
+	dev &= dev_m;
+	subdev &= subdev_m;
+
+	/* write the hardware filter */
+	out->data = func          |
+		    dev      << 7 |
+		    subdev   << 15;
+	out->mask = func_m        |
+		    dev_m    << 7 |
+		    subdev_m << 15;
+
+	if (len) {
+		out->minlen = len;
+		out->maxlen = len;
+	}
+	return 0;
+}
+
+/*
+ * Sony SIRC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/sirc.php
+ *          http://picprojects.org.uk/projects/sirc/sonysirc.pdf
+ */
+struct img_ir_decoder img_ir_sony = {
+	.type = RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | RC_PROTO_BIT_SONY20,
+	.control = {
+		.decoden = 1,
+		.code_type = IMG_IR_CODETYPE_PULSELEN,
+	},
+	/* main timings */
+	.unit = 600000, /* 600 us */
+	.timings = {
+		/* leader symbol */
+		.ldr = {
+			.pulse = { 4	/* 2.4 ms */ },
+			.space = { 1	/* 600 us */ },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse = { 1	/* 600 us */ },
+			.space = { 1	/* 600 us */ },
+		},
+		/* 1 symbol */
+		.s01 = {
+			.pulse = { 2	/* 1.2 ms */ },
+			.space = { 1	/* 600 us */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 12,
+			.maxlen = 20,
+			.ft_min = 10,	/* 6 ms */
+		},
+	},
+	/* scancode logic */
+	.scancode = img_ir_sony_scancode,
+	.filter = img_ir_sony_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir.h b/drivers/media/rc/img-ir/img-ir.h
new file mode 100644
index 000000000..a0153c311
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ImgTec IR Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_H_
+#define _IMG_IR_H_
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include "img-ir-raw.h"
+#include "img-ir-hw.h"
+
+/* registers */
+
+/* relative to the start of the IR block of registers */
+#define IMG_IR_CONTROL		0x00
+#define IMG_IR_STATUS		0x04
+#define IMG_IR_DATA_LW		0x08
+#define IMG_IR_DATA_UP		0x0c
+#define IMG_IR_LEAD_SYMB_TIMING	0x10
+#define IMG_IR_S00_SYMB_TIMING	0x14
+#define IMG_IR_S01_SYMB_TIMING	0x18
+#define IMG_IR_S10_SYMB_TIMING	0x1c
+#define IMG_IR_S11_SYMB_TIMING	0x20
+#define IMG_IR_FREE_SYMB_TIMING	0x24
+#define IMG_IR_POW_MOD_PARAMS	0x28
+#define IMG_IR_POW_MOD_ENABLE	0x2c
+#define IMG_IR_IRQ_MSG_DATA_LW	0x30
+#define IMG_IR_IRQ_MSG_DATA_UP	0x34
+#define IMG_IR_IRQ_MSG_MASK_LW	0x38
+#define IMG_IR_IRQ_MSG_MASK_UP	0x3c
+#define IMG_IR_IRQ_ENABLE	0x40
+#define IMG_IR_IRQ_STATUS	0x44
+#define IMG_IR_IRQ_CLEAR	0x48
+#define IMG_IR_IRCORE_ID	0xf0
+#define IMG_IR_CORE_REV		0xf4
+#define IMG_IR_CORE_DES1	0xf8
+#define IMG_IR_CORE_DES2	0xfc
+
+
+/* field masks */
+
+/* IMG_IR_CONTROL */
+#define IMG_IR_DECODEN		0x40000000
+#define IMG_IR_CODETYPE		0x30000000
+#define IMG_IR_CODETYPE_SHIFT		28
+#define IMG_IR_HDRTOG		0x08000000
+#define IMG_IR_LDRDEC		0x04000000
+#define IMG_IR_DECODINPOL	0x02000000	/* active high */
+#define IMG_IR_BITORIEN		0x01000000	/* MSB first */
+#define IMG_IR_D1VALIDSEL	0x00008000
+#define IMG_IR_BITINV		0x00000040	/* don't invert */
+#define IMG_IR_DECODEND2	0x00000010
+#define IMG_IR_BITORIEND2	0x00000002	/* MSB first */
+#define IMG_IR_BITINVD2		0x00000001	/* don't invert */
+
+/* IMG_IR_STATUS */
+#define IMG_IR_RXDVALD2		0x00001000
+#define IMG_IR_IRRXD		0x00000400
+#define IMG_IR_TOGSTATE		0x00000200
+#define IMG_IR_RXDVAL		0x00000040
+#define IMG_IR_RXDLEN		0x0000003f
+#define IMG_IR_RXDLEN_SHIFT		0
+
+/* IMG_IR_LEAD_SYMB_TIMING, IMG_IR_Sxx_SYMB_TIMING */
+#define IMG_IR_PD_MAX		0xff000000
+#define IMG_IR_PD_MAX_SHIFT		24
+#define IMG_IR_PD_MIN		0x00ff0000
+#define IMG_IR_PD_MIN_SHIFT		16
+#define IMG_IR_W_MAX		0x0000ff00
+#define IMG_IR_W_MAX_SHIFT		8
+#define IMG_IR_W_MIN		0x000000ff
+#define IMG_IR_W_MIN_SHIFT		0
+
+/* IMG_IR_FREE_SYMB_TIMING */
+#define IMG_IR_MAXLEN		0x0007e000
+#define IMG_IR_MAXLEN_SHIFT		13
+#define IMG_IR_MINLEN		0x00001f00
+#define IMG_IR_MINLEN_SHIFT		8
+#define IMG_IR_FT_MIN		0x000000ff
+#define IMG_IR_FT_MIN_SHIFT		0
+
+/* IMG_IR_POW_MOD_PARAMS */
+#define IMG_IR_PERIOD_LEN	0x3f000000
+#define IMG_IR_PERIOD_LEN_SHIFT		24
+#define IMG_IR_PERIOD_DUTY	0x003f0000
+#define IMG_IR_PERIOD_DUTY_SHIFT	16
+#define IMG_IR_STABLE_STOP	0x00003f00
+#define IMG_IR_STABLE_STOP_SHIFT	8
+#define IMG_IR_STABLE_START	0x0000003f
+#define IMG_IR_STABLE_START_SHIFT	0
+
+/* IMG_IR_POW_MOD_ENABLE */
+#define IMG_IR_POWER_OUT_EN	0x00000002
+#define IMG_IR_POWER_MOD_EN	0x00000001
+
+/* IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_STATUS, IMG_IR_IRQ_CLEAR */
+#define IMG_IR_IRQ_DEC2_ERR	0x00000080
+#define IMG_IR_IRQ_DEC_ERR	0x00000040
+#define IMG_IR_IRQ_ACT_LEVEL	0x00000020
+#define IMG_IR_IRQ_FALL_EDGE	0x00000010
+#define IMG_IR_IRQ_RISE_EDGE	0x00000008
+#define IMG_IR_IRQ_DATA_MATCH	0x00000004
+#define IMG_IR_IRQ_DATA2_VALID	0x00000002
+#define IMG_IR_IRQ_DATA_VALID	0x00000001
+#define IMG_IR_IRQ_ALL		0x000000ff
+#define IMG_IR_IRQ_EDGE		(IMG_IR_IRQ_FALL_EDGE | IMG_IR_IRQ_RISE_EDGE)
+
+/* IMG_IR_CORE_ID */
+#define IMG_IR_CORE_ID		0x00ff0000
+#define IMG_IR_CORE_ID_SHIFT		16
+#define IMG_IR_CORE_CONFIG	0x0000ffff
+#define IMG_IR_CORE_CONFIG_SHIFT	0
+
+/* IMG_IR_CORE_REV */
+#define IMG_IR_DESIGNER		0xff000000
+#define IMG_IR_DESIGNER_SHIFT		24
+#define IMG_IR_MAJOR_REV	0x00ff0000
+#define IMG_IR_MAJOR_REV_SHIFT		16
+#define IMG_IR_MINOR_REV	0x0000ff00
+#define IMG_IR_MINOR_REV_SHIFT		8
+#define IMG_IR_MAINT_REV	0x000000ff
+#define IMG_IR_MAINT_REV_SHIFT		0
+
+struct device;
+struct clk;
+
+/**
+ * struct img_ir_priv - Private driver data.
+ * @dev:		Platform device.
+ * @irq:		IRQ number.
+ * @clk:		Input clock.
+ * @sys_clk:		System clock.
+ * @reg_base:		Iomem base address of IR register block.
+ * @lock:		Protects IR registers and variables in this struct.
+ * @raw:		Driver data for raw decoder.
+ * @hw:			Driver data for hardware decoder.
+ */
+struct img_ir_priv {
+	struct device		*dev;
+	int			irq;
+	struct clk		*clk;
+	struct clk		*sys_clk;
+	void __iomem		*reg_base;
+	spinlock_t		lock;
+
+	struct img_ir_priv_raw	raw;
+	struct img_ir_priv_hw	hw;
+};
+
+/* Hardware access */
+
+static inline void img_ir_write(struct img_ir_priv *priv,
+				unsigned int reg_offs, unsigned int data)
+{
+	iowrite32(data, priv->reg_base + reg_offs);
+}
+
+static inline unsigned int img_ir_read(struct img_ir_priv *priv,
+				       unsigned int reg_offs)
+{
+	return ioread32(priv->reg_base + reg_offs);
+}
+
+#endif /* _IMG_IR_H_ */