Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 707 insertions, 0 deletions

diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
new file mode 100644
index 000000000..a6661e070
--- /dev/null
+++ b/drivers/mfd/max77620.c
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Maxim MAX77620 MFD Driver
+ *
+ * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ *	Laxman Dewangan <ldewangan@nvidia.com>
+ *	Chaitanya Bandi <bandik@nvidia.com>
+ *	Mallikarjun Kasoju <mkasoju@nvidia.com>
+ */
+
+/****************** Teminology used in driver ********************
+ * Here are some terminology used from datasheet for quick reference:
+ * Flexible Power Sequence (FPS):
+ * The Flexible Power Sequencer (FPS) allows each regulator to power up under
+ * hardware or software control. Additionally, each regulator can power on
+ * independently or among a group of other regulators with an adjustable
+ * power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can
+ * be programmed to be part of a sequence allowing external regulators to be
+ * sequenced along with internal regulators. 32KHz clock can be programmed to
+ * be part of a sequence.
+ * There is 3 FPS confguration registers and all resources are configured to
+ * any of these FPS or no FPS.
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77620.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static struct max77620_chip *max77620_scratch;
+
+static const struct resource gpio_resources[] = {
+	DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
+};
+
+static const struct resource power_resources[] = {
+	DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW),
+};
+
+static const struct resource rtc_resources[] = {
+	DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC),
+};
+
+static const struct resource thermal_resources[] = {
+	DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1),
+	DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2),
+};
+
+static const struct regmap_irq max77620_top_irqs[] = {
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK),
+	REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK),
+};
+
+static const struct mfd_cell max77620_children[] = {
+	{ .name = "max77620-pinctrl", },
+	{ .name = "max77620-clock", },
+	{ .name = "max77620-pmic", },
+	{ .name = "max77620-watchdog", },
+	{
+		.name = "max77620-gpio",
+		.resources = gpio_resources,
+		.num_resources = ARRAY_SIZE(gpio_resources),
+	}, {
+		.name = "max77620-rtc",
+		.resources = rtc_resources,
+		.num_resources = ARRAY_SIZE(rtc_resources),
+	}, {
+		.name = "max77620-power",
+		.resources = power_resources,
+		.num_resources = ARRAY_SIZE(power_resources),
+	}, {
+		.name = "max77620-thermal",
+		.resources = thermal_resources,
+		.num_resources = ARRAY_SIZE(thermal_resources),
+	},
+};
+
+static const struct mfd_cell max20024_children[] = {
+	{ .name = "max20024-pinctrl", },
+	{ .name = "max77620-clock", },
+	{ .name = "max20024-pmic", },
+	{ .name = "max77620-watchdog", },
+	{
+		.name = "max77620-gpio",
+		.resources = gpio_resources,
+		.num_resources = ARRAY_SIZE(gpio_resources),
+	}, {
+		.name = "max77620-rtc",
+		.resources = rtc_resources,
+		.num_resources = ARRAY_SIZE(rtc_resources),
+	}, {
+		.name = "max20024-power",
+		.resources = power_resources,
+		.num_resources = ARRAY_SIZE(power_resources),
+	},
+};
+
+static const struct mfd_cell max77663_children[] = {
+	{ .name = "max77620-pinctrl", },
+	{ .name = "max77620-clock", },
+	{ .name = "max77663-pmic", },
+	{ .name = "max77620-watchdog", },
+	{
+		.name = "max77620-gpio",
+		.resources = gpio_resources,
+		.num_resources = ARRAY_SIZE(gpio_resources),
+	}, {
+		.name = "max77620-rtc",
+		.resources = rtc_resources,
+		.num_resources = ARRAY_SIZE(rtc_resources),
+	}, {
+		.name = "max77663-power",
+		.resources = power_resources,
+		.num_resources = ARRAY_SIZE(power_resources),
+	},
+};
+
+static const struct regmap_range max77620_readable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
+};
+
+static const struct regmap_access_table max77620_readable_table = {
+	.yes_ranges = max77620_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges),
+};
+
+static const struct regmap_range max20024_readable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
+	regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD),
+};
+
+static const struct regmap_access_table max20024_readable_table = {
+	.yes_ranges = max20024_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges),
+};
+
+static const struct regmap_range max77620_writable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
+};
+
+static const struct regmap_access_table max77620_writable_table = {
+	.yes_ranges = max77620_writable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges),
+};
+
+static const struct regmap_range max77620_cacheable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3),
+	regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3),
+};
+
+static const struct regmap_access_table max77620_volatile_table = {
+	.no_ranges = max77620_cacheable_ranges,
+	.n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges),
+};
+
+static const struct regmap_config max77620_regmap_config = {
+	.name = "power-slave",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77620_REG_DVSSD4 + 1,
+	.cache_type = REGCACHE_RBTREE,
+	.rd_table = &max77620_readable_table,
+	.wr_table = &max77620_writable_table,
+	.volatile_table = &max77620_volatile_table,
+	.use_single_write = true,
+};
+
+static const struct regmap_config max20024_regmap_config = {
+	.name = "power-slave",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX20024_REG_MAX_ADD + 1,
+	.cache_type = REGCACHE_RBTREE,
+	.rd_table = &max20024_readable_table,
+	.wr_table = &max77620_writable_table,
+	.volatile_table = &max77620_volatile_table,
+};
+
+static const struct regmap_range max77663_readable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_readable_table = {
+	.yes_ranges = max77663_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges),
+};
+
+static const struct regmap_range max77663_writable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_writable_table = {
+	.yes_ranges = max77663_writable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges),
+};
+
+static const struct regmap_config max77663_regmap_config = {
+	.name = "power-slave",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77620_REG_CID5 + 1,
+	.cache_type = REGCACHE_RBTREE,
+	.rd_table = &max77663_readable_table,
+	.wr_table = &max77663_writable_table,
+	.volatile_table = &max77620_volatile_table,
+};
+
+/*
+ * MAX77620 and MAX20024 has the following steps of the interrupt handling
+ * for TOP interrupts:
+ * 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM.
+ * 2. Read IRQTOP and service the interrupt.
+ * 3. Once all interrupts has been checked and serviced, the interrupt service
+ *    routine un-masks the hardware interrupt line by clearing GLBLM.
+ */
+static int max77620_irq_global_mask(void *irq_drv_data)
+{
+	struct max77620_chip *chip = irq_drv_data;
+	int ret;
+
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
+				 MAX77620_GLBLM_MASK, MAX77620_GLBLM_MASK);
+	if (ret < 0)
+		dev_err(chip->dev, "Failed to set GLBLM: %d\n", ret);
+
+	return ret;
+}
+
+static int max77620_irq_global_unmask(void *irq_drv_data)
+{
+	struct max77620_chip *chip = irq_drv_data;
+	int ret;
+
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
+				 MAX77620_GLBLM_MASK, 0);
+	if (ret < 0)
+		dev_err(chip->dev, "Failed to reset GLBLM: %d\n", ret);
+
+	return ret;
+}
+
+static struct regmap_irq_chip max77620_top_irq_chip = {
+	.name = "max77620-top",
+	.irqs = max77620_top_irqs,
+	.num_irqs = ARRAY_SIZE(max77620_top_irqs),
+	.num_regs = 2,
+	.status_base = MAX77620_REG_IRQTOP,
+	.mask_base = MAX77620_REG_IRQTOPM,
+	.handle_pre_irq = max77620_irq_global_mask,
+	.handle_post_irq = max77620_irq_global_unmask,
+};
+
+/* max77620_get_fps_period_reg_value:  Get FPS bit field value from
+ *				       requested periods.
+ * MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560
+ * and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80,
+ * 160, 320, 540, 1280 and 2560 microseconds.
+ * The FPS register has 3 bits field to set the FPS period as
+ * bits		max77620		max20024
+ * 000		40			20
+ * 001		80			40
+ * :::
+*/
+static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
+					     int tperiod)
+{
+	int fps_min_period;
+	int i;
+
+	switch (chip->chip_id) {
+	case MAX20024:
+		fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
+		break;
+	case MAX77620:
+		fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
+		break;
+	case MAX77663:
+		fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 7; i++) {
+		if (fps_min_period >= tperiod)
+			return i;
+		fps_min_period *= 2;
+	}
+
+	return i;
+}
+
+/* max77620_config_fps: Configure FPS configuration registers
+ *			based on platform specific information.
+ */
+static int max77620_config_fps(struct max77620_chip *chip,
+			       struct device_node *fps_np)
+{
+	struct device *dev = chip->dev;
+	unsigned int mask = 0, config = 0;
+	u32 fps_max_period;
+	u32 param_val;
+	int tperiod, fps_id;
+	int ret;
+	char fps_name[10];
+
+	switch (chip->chip_id) {
+	case MAX20024:
+		fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
+		break;
+	case MAX77620:
+		fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
+		break;
+	case MAX77663:
+		fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
+		sprintf(fps_name, "fps%d", fps_id);
+		if (of_node_name_eq(fps_np, fps_name))
+			break;
+	}
+
+	if (fps_id == MAX77620_FPS_COUNT) {
+		dev_err(dev, "FPS node name %pOFn is not valid\n", fps_np);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us",
+				   &param_val);
+	if (!ret) {
+		mask |= MAX77620_FPS_TIME_PERIOD_MASK;
+		chip->shutdown_fps_period[fps_id] = min(param_val,
+							fps_max_period);
+		tperiod = max77620_get_fps_period_reg_value(chip,
+				chip->shutdown_fps_period[fps_id]);
+		config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT;
+	}
+
+	ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us",
+				   &param_val);
+	if (!ret)
+		chip->suspend_fps_period[fps_id] = min(param_val,
+						       fps_max_period);
+
+	ret = of_property_read_u32(fps_np, "maxim,fps-event-source",
+				   &param_val);
+	if (!ret) {
+		if (param_val > 2) {
+			dev_err(dev, "FPS%d event-source invalid\n", fps_id);
+			return -EINVAL;
+		}
+		mask |= MAX77620_FPS_EN_SRC_MASK;
+		config |= param_val << MAX77620_FPS_EN_SRC_SHIFT;
+		if (param_val == 2) {
+			mask |= MAX77620_FPS_ENFPS_SW_MASK;
+			config |= MAX77620_FPS_ENFPS_SW;
+		}
+	}
+
+	if (!chip->sleep_enable && !chip->enable_global_lpm) {
+		ret = of_property_read_u32(fps_np,
+				"maxim,device-state-on-disabled-event",
+				&param_val);
+		if (!ret) {
+			if (param_val == 0)
+				chip->sleep_enable = true;
+			else if (param_val == 1)
+				chip->enable_global_lpm = true;
+		}
+	}
+
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
+				 mask, config);
+	if (ret < 0) {
+		dev_err(dev, "Failed to update FPS CFG: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max77620_initialise_fps(struct max77620_chip *chip)
+{
+	struct device *dev = chip->dev;
+	struct device_node *fps_np, *fps_child;
+	u8 config;
+	int fps_id;
+	int ret;
+
+	for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
+		chip->shutdown_fps_period[fps_id] = -1;
+		chip->suspend_fps_period[fps_id] = -1;
+	}
+
+	fps_np = of_get_child_by_name(dev->of_node, "fps");
+	if (!fps_np)
+		goto skip_fps;
+
+	for_each_child_of_node(fps_np, fps_child) {
+		ret = max77620_config_fps(chip, fps_child);
+		if (ret < 0) {
+			of_node_put(fps_child);
+			of_node_put(fps_np);
+			return ret;
+		}
+	}
+	of_node_put(fps_np);
+
+	config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0;
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
+				 MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config);
+	if (ret < 0) {
+		dev_err(dev, "Failed to update SLP_LPM: %d\n", ret);
+		return ret;
+	}
+
+skip_fps:
+	if (chip->chip_id == MAX77663)
+		return 0;
+
+	/* Enable wake on EN0 pin */
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
+				 MAX77620_ONOFFCNFG2_WK_EN0,
+				 MAX77620_ONOFFCNFG2_WK_EN0);
+	if (ret < 0) {
+		dev_err(dev, "Failed to update WK_EN0: %d\n", ret);
+		return ret;
+	}
+
+	/* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
+	if ((chip->chip_id == MAX20024) && chip->sleep_enable) {
+		config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE;
+		ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
+					 config, config);
+		if (ret < 0) {
+			dev_err(dev, "Failed to update SLPEN: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int max77620_read_es_version(struct max77620_chip *chip)
+{
+	unsigned int val;
+	u8 cid_val[6];
+	int i;
+	int ret;
+
+	for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) {
+		ret = regmap_read(chip->rmap, i, &val);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to read CID: %d\n", ret);
+			return ret;
+		}
+		dev_dbg(chip->dev, "CID%d: 0x%02x\n",
+			i - MAX77620_REG_CID0, val);
+		cid_val[i - MAX77620_REG_CID0] = val;
+	}
+
+	/* CID4 is OTP Version  and CID5 is ES version */
+	dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n",
+		 cid_val[4], MAX77620_CID5_DIDM(cid_val[5]));
+
+	return ret;
+}
+
+static void max77620_pm_power_off(void)
+{
+	struct max77620_chip *chip = max77620_scratch;
+
+	regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
+			   MAX77620_ONOFFCNFG1_SFT_RST,
+			   MAX77620_ONOFFCNFG1_SFT_RST);
+}
+
+static int max77620_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	const struct regmap_config *rmap_config;
+	struct max77620_chip *chip;
+	const struct mfd_cell *mfd_cells;
+	int n_mfd_cells;
+	bool pm_off;
+	int ret;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->dev = &client->dev;
+	chip->chip_irq = client->irq;
+	chip->chip_id = (enum max77620_chip_id)id->driver_data;
+
+	switch (chip->chip_id) {
+	case MAX77620:
+		mfd_cells = max77620_children;
+		n_mfd_cells = ARRAY_SIZE(max77620_children);
+		rmap_config = &max77620_regmap_config;
+		break;
+	case MAX20024:
+		mfd_cells = max20024_children;
+		n_mfd_cells = ARRAY_SIZE(max20024_children);
+		rmap_config = &max20024_regmap_config;
+		break;
+	case MAX77663:
+		mfd_cells = max77663_children;
+		n_mfd_cells = ARRAY_SIZE(max77663_children);
+		rmap_config = &max77663_regmap_config;
+		break;
+	default:
+		dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
+		return -EINVAL;
+	}
+
+	chip->rmap = devm_regmap_init_i2c(client, rmap_config);
+	if (IS_ERR(chip->rmap)) {
+		ret = PTR_ERR(chip->rmap);
+		dev_err(chip->dev, "Failed to initialise regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = max77620_read_es_version(chip);
+	if (ret < 0)
+		return ret;
+
+	max77620_top_irq_chip.irq_drv_data = chip;
+	ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq,
+				       IRQF_ONESHOT | IRQF_SHARED, 0,
+				       &max77620_top_irq_chip,
+				       &chip->top_irq_data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret);
+		return ret;
+	}
+
+	ret = max77620_initialise_fps(chip);
+	if (ret < 0)
+		return ret;
+
+	ret =  devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
+				    mfd_cells, n_mfd_cells, NULL, 0,
+				    regmap_irq_get_domain(chip->top_irq_data));
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to add MFD children: %d\n", ret);
+		return ret;
+	}
+
+	pm_off = of_device_is_system_power_controller(client->dev.of_node);
+	if (pm_off && !pm_power_off) {
+		max77620_scratch = chip;
+		pm_power_off = max77620_pm_power_off;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max77620_set_fps_period(struct max77620_chip *chip,
+				   int fps_id, int time_period)
+{
+	int period = max77620_get_fps_period_reg_value(chip, time_period);
+	int ret;
+
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
+				 MAX77620_FPS_TIME_PERIOD_MASK,
+				 period << MAX77620_FPS_TIME_PERIOD_SHIFT);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to update FPS period: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max77620_i2c_suspend(struct device *dev)
+{
+	struct max77620_chip *chip = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned int config;
+	int fps;
+	int ret;
+
+	for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
+		if (chip->suspend_fps_period[fps] < 0)
+			continue;
+
+		ret = max77620_set_fps_period(chip, fps,
+					      chip->suspend_fps_period[fps]);
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * For MAX20024: No need to configure SLPEN on suspend as
+	 * it will be configured on Init.
+	 */
+	if (chip->chip_id == MAX20024)
+		goto out;
+
+	config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0;
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
+				 MAX77620_ONOFFCNFG1_SLPEN,
+				 config);
+	if (ret < 0) {
+		dev_err(dev, "Failed to configure sleep in suspend: %d\n", ret);
+		return ret;
+	}
+
+	if (chip->chip_id == MAX77663)
+		goto out;
+
+	/* Disable WK_EN0 */
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
+				 MAX77620_ONOFFCNFG2_WK_EN0, 0);
+	if (ret < 0) {
+		dev_err(dev, "Failed to configure WK_EN in suspend: %d\n", ret);
+		return ret;
+	}
+
+out:
+	disable_irq(client->irq);
+
+	return 0;
+}
+
+static int max77620_i2c_resume(struct device *dev)
+{
+	struct max77620_chip *chip = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+	int fps;
+
+	for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
+		if (chip->shutdown_fps_period[fps] < 0)
+			continue;
+
+		ret = max77620_set_fps_period(chip, fps,
+					      chip->shutdown_fps_period[fps]);
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * For MAX20024: No need to configure WKEN0 on resume as
+	 * it is configured on Init.
+	 */
+	if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663)
+		goto out;
+
+	/* Enable WK_EN0 */
+	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
+				 MAX77620_ONOFFCNFG2_WK_EN0,
+				 MAX77620_ONOFFCNFG2_WK_EN0);
+	if (ret < 0) {
+		dev_err(dev, "Failed to configure WK_EN0 n resume: %d\n", ret);
+		return ret;
+	}
+
+out:
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static const struct i2c_device_id max77620_id[] = {
+	{"max77620", MAX77620},
+	{"max20024", MAX20024},
+	{"max77663", MAX77663},
+	{},
+};
+
+static const struct dev_pm_ops max77620_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume)
+};
+
+static struct i2c_driver max77620_driver = {
+	.driver = {
+		.name = "max77620",
+		.pm = &max77620_pm_ops,
+	},
+	.probe = max77620_probe,
+	.id_table = max77620_id,
+};
+builtin_i2c_driver(max77620_driver);