Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 2501 insertions, 0 deletions

diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig
new file mode 100644
index 000000000..962725788
--- /dev/null
+++ b/drivers/net/can/c_can/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig CAN_C_CAN
+	tristate "Bosch C_CAN/D_CAN devices"
+	depends on HAS_IOMEM
+
+if CAN_C_CAN
+
+config CAN_C_CAN_PLATFORM
+	tristate "Generic Platform Bus based C_CAN/D_CAN driver"
+	help
+	  This driver adds support for the C_CAN/D_CAN chips connected
+	  to the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices) which can be found on various
+	  boards from ST Microelectronics (http://www.st.com) like the
+	  SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
+	  boards like am335x, dm814x, dm813x and dm811x.
+
+config CAN_C_CAN_PCI
+	tristate "Generic PCI Bus based C_CAN/D_CAN driver"
+	depends on PCI
+	help
+	  This driver adds support for the C_CAN/D_CAN chips connected
+	  to the PCI bus.
+endif
diff --git a/drivers/net/can/c_can/Makefile b/drivers/net/can/c_can/Makefile
new file mode 100644
index 000000000..6fa3b2b9e
--- /dev/null
+++ b/drivers/net/can/c_can/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+#  Makefile for the Bosch C_CAN controller drivers.
+#
+
+obj-$(CONFIG_CAN_C_CAN) += c_can.o
+
+c_can-objs :=
+c_can-objs += c_can_ethtool.o
+c_can-objs += c_can_main.o
+
+obj-$(CONFIG_CAN_C_CAN_PLATFORM) += c_can_platform.o
+obj-$(CONFIG_CAN_C_CAN_PCI) += c_can_pci.o
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
new file mode 100644
index 000000000..029cd8194
--- /dev/null
+++ b/drivers/net/can/c_can/c_can.h
@@ -0,0 +1,256 @@
+/*
+ * CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef C_CAN_H
+#define C_CAN_H
+
+enum reg {
+	C_CAN_CTRL_REG = 0,
+	C_CAN_CTRL_EX_REG,
+	C_CAN_STS_REG,
+	C_CAN_ERR_CNT_REG,
+	C_CAN_BTR_REG,
+	C_CAN_INT_REG,
+	C_CAN_TEST_REG,
+	C_CAN_BRPEXT_REG,
+	C_CAN_IF1_COMREQ_REG,
+	C_CAN_IF1_COMMSK_REG,
+	C_CAN_IF1_MASK1_REG,
+	C_CAN_IF1_MASK2_REG,
+	C_CAN_IF1_ARB1_REG,
+	C_CAN_IF1_ARB2_REG,
+	C_CAN_IF1_MSGCTRL_REG,
+	C_CAN_IF1_DATA1_REG,
+	C_CAN_IF1_DATA2_REG,
+	C_CAN_IF1_DATA3_REG,
+	C_CAN_IF1_DATA4_REG,
+	C_CAN_IF2_COMREQ_REG,
+	C_CAN_IF2_COMMSK_REG,
+	C_CAN_IF2_MASK1_REG,
+	C_CAN_IF2_MASK2_REG,
+	C_CAN_IF2_ARB1_REG,
+	C_CAN_IF2_ARB2_REG,
+	C_CAN_IF2_MSGCTRL_REG,
+	C_CAN_IF2_DATA1_REG,
+	C_CAN_IF2_DATA2_REG,
+	C_CAN_IF2_DATA3_REG,
+	C_CAN_IF2_DATA4_REG,
+	C_CAN_TXRQST1_REG,
+	C_CAN_TXRQST2_REG,
+	C_CAN_NEWDAT1_REG,
+	C_CAN_NEWDAT2_REG,
+	C_CAN_INTPND1_REG,
+	C_CAN_INTPND2_REG,
+	C_CAN_INTPND3_REG,
+	C_CAN_MSGVAL1_REG,
+	C_CAN_MSGVAL2_REG,
+	C_CAN_FUNCTION_REG,
+};
+
+static const u16 __maybe_unused reg_map_c_can[] = {
+	[C_CAN_CTRL_REG]	= 0x00,
+	[C_CAN_STS_REG]		= 0x02,
+	[C_CAN_ERR_CNT_REG]	= 0x04,
+	[C_CAN_BTR_REG]		= 0x06,
+	[C_CAN_INT_REG]		= 0x08,
+	[C_CAN_TEST_REG]	= 0x0A,
+	[C_CAN_BRPEXT_REG]	= 0x0C,
+	[C_CAN_IF1_COMREQ_REG]	= 0x10,
+	[C_CAN_IF1_COMMSK_REG]	= 0x12,
+	[C_CAN_IF1_MASK1_REG]	= 0x14,
+	[C_CAN_IF1_MASK2_REG]	= 0x16,
+	[C_CAN_IF1_ARB1_REG]	= 0x18,
+	[C_CAN_IF1_ARB2_REG]	= 0x1A,
+	[C_CAN_IF1_MSGCTRL_REG]	= 0x1C,
+	[C_CAN_IF1_DATA1_REG]	= 0x1E,
+	[C_CAN_IF1_DATA2_REG]	= 0x20,
+	[C_CAN_IF1_DATA3_REG]	= 0x22,
+	[C_CAN_IF1_DATA4_REG]	= 0x24,
+	[C_CAN_IF2_COMREQ_REG]	= 0x40,
+	[C_CAN_IF2_COMMSK_REG]	= 0x42,
+	[C_CAN_IF2_MASK1_REG]	= 0x44,
+	[C_CAN_IF2_MASK2_REG]	= 0x46,
+	[C_CAN_IF2_ARB1_REG]	= 0x48,
+	[C_CAN_IF2_ARB2_REG]	= 0x4A,
+	[C_CAN_IF2_MSGCTRL_REG]	= 0x4C,
+	[C_CAN_IF2_DATA1_REG]	= 0x4E,
+	[C_CAN_IF2_DATA2_REG]	= 0x50,
+	[C_CAN_IF2_DATA3_REG]	= 0x52,
+	[C_CAN_IF2_DATA4_REG]	= 0x54,
+	[C_CAN_TXRQST1_REG]	= 0x80,
+	[C_CAN_TXRQST2_REG]	= 0x82,
+	[C_CAN_NEWDAT1_REG]	= 0x90,
+	[C_CAN_NEWDAT2_REG]	= 0x92,
+	[C_CAN_INTPND1_REG]	= 0xA0,
+	[C_CAN_INTPND2_REG]	= 0xA2,
+	[C_CAN_MSGVAL1_REG]	= 0xB0,
+	[C_CAN_MSGVAL2_REG]	= 0xB2,
+};
+
+static const u16 __maybe_unused reg_map_d_can[] = {
+	[C_CAN_CTRL_REG]	= 0x00,
+	[C_CAN_CTRL_EX_REG]	= 0x02,
+	[C_CAN_STS_REG]		= 0x04,
+	[C_CAN_ERR_CNT_REG]	= 0x08,
+	[C_CAN_BTR_REG]		= 0x0C,
+	[C_CAN_BRPEXT_REG]	= 0x0E,
+	[C_CAN_INT_REG]		= 0x10,
+	[C_CAN_TEST_REG]	= 0x14,
+	[C_CAN_FUNCTION_REG]	= 0x18,
+	[C_CAN_TXRQST1_REG]	= 0x88,
+	[C_CAN_TXRQST2_REG]	= 0x8A,
+	[C_CAN_NEWDAT1_REG]	= 0x9C,
+	[C_CAN_NEWDAT2_REG]	= 0x9E,
+	[C_CAN_INTPND1_REG]	= 0xB0,
+	[C_CAN_INTPND2_REG]	= 0xB2,
+	[C_CAN_INTPND3_REG]	= 0xB4,
+	[C_CAN_MSGVAL1_REG]	= 0xC4,
+	[C_CAN_MSGVAL2_REG]	= 0xC6,
+	[C_CAN_IF1_COMREQ_REG]	= 0x100,
+	[C_CAN_IF1_COMMSK_REG]	= 0x102,
+	[C_CAN_IF1_MASK1_REG]	= 0x104,
+	[C_CAN_IF1_MASK2_REG]	= 0x106,
+	[C_CAN_IF1_ARB1_REG]	= 0x108,
+	[C_CAN_IF1_ARB2_REG]	= 0x10A,
+	[C_CAN_IF1_MSGCTRL_REG]	= 0x10C,
+	[C_CAN_IF1_DATA1_REG]	= 0x110,
+	[C_CAN_IF1_DATA2_REG]	= 0x112,
+	[C_CAN_IF1_DATA3_REG]	= 0x114,
+	[C_CAN_IF1_DATA4_REG]	= 0x116,
+	[C_CAN_IF2_COMREQ_REG]	= 0x120,
+	[C_CAN_IF2_COMMSK_REG]	= 0x122,
+	[C_CAN_IF2_MASK1_REG]	= 0x124,
+	[C_CAN_IF2_MASK2_REG]	= 0x126,
+	[C_CAN_IF2_ARB1_REG]	= 0x128,
+	[C_CAN_IF2_ARB2_REG]	= 0x12A,
+	[C_CAN_IF2_MSGCTRL_REG]	= 0x12C,
+	[C_CAN_IF2_DATA1_REG]	= 0x130,
+	[C_CAN_IF2_DATA2_REG]	= 0x132,
+	[C_CAN_IF2_DATA3_REG]	= 0x134,
+	[C_CAN_IF2_DATA4_REG]	= 0x136,
+};
+
+enum c_can_dev_id {
+	BOSCH_C_CAN,
+	BOSCH_D_CAN,
+};
+
+struct raminit_bits {
+	u8 start;
+	u8 done;
+};
+
+struct c_can_driver_data {
+	enum c_can_dev_id id;
+	unsigned int msg_obj_num;
+
+	/* RAMINIT register description. Optional. */
+	const struct raminit_bits *raminit_bits; /* Array of START/DONE bit positions */
+	u8 raminit_num;		/* Number of CAN instances on the SoC */
+	bool raminit_pulse;	/* If set, sets and clears START bit (pulse) */
+};
+
+/* Out of band RAMINIT register access via syscon regmap */
+struct c_can_raminit {
+	struct regmap *syscon;	/* for raminit ctrl. reg. access */
+	unsigned int reg;	/* register index within syscon */
+	struct raminit_bits bits;
+	bool needs_pulse;
+};
+
+/* c_can tx ring structure */
+struct c_can_tx_ring {
+	unsigned int head;
+	unsigned int tail;
+	unsigned int obj_num;
+};
+
+/* c_can private data structure */
+struct c_can_priv {
+	struct can_priv can;	/* must be the first member */
+	struct napi_struct napi;
+	struct net_device *dev;
+	struct device *device;
+	unsigned int msg_obj_num;
+	unsigned int msg_obj_rx_num;
+	unsigned int msg_obj_tx_num;
+	unsigned int msg_obj_rx_first;
+	unsigned int msg_obj_rx_last;
+	unsigned int msg_obj_tx_first;
+	unsigned int msg_obj_tx_last;
+	u32 msg_obj_rx_mask;
+	atomic_t sie_pending;
+	unsigned long tx_dir;
+	int last_status;
+	struct c_can_tx_ring tx;
+	u16 (*read_reg)(const struct c_can_priv *priv, enum reg index);
+	void (*write_reg)(const struct c_can_priv *priv, enum reg index, u16 val);
+	u32 (*read_reg32)(const struct c_can_priv *priv, enum reg index);
+	void (*write_reg32)(const struct c_can_priv *priv, enum reg index, u32 val);
+	void __iomem *base;
+	const u16 *regs;
+	enum c_can_dev_id type;
+	struct c_can_raminit raminit_sys;	/* RAMINIT via syscon regmap */
+	void (*raminit)(const struct c_can_priv *priv, bool enable);
+	u32 comm_rcv_high;
+};
+
+struct net_device *alloc_c_can_dev(int msg_obj_num);
+void free_c_can_dev(struct net_device *dev);
+int register_c_can_dev(struct net_device *dev);
+void unregister_c_can_dev(struct net_device *dev);
+
+#ifdef CONFIG_PM
+int c_can_power_up(struct net_device *dev);
+int c_can_power_down(struct net_device *dev);
+#endif
+
+extern const struct ethtool_ops c_can_ethtool_ops;
+
+static inline u8 c_can_get_tx_head(const struct c_can_tx_ring *ring)
+{
+	return ring->head & (ring->obj_num - 1);
+}
+
+static inline u8 c_can_get_tx_tail(const struct c_can_tx_ring *ring)
+{
+	return ring->tail & (ring->obj_num - 1);
+}
+
+static inline u8 c_can_get_tx_free(const struct c_can_priv *priv,
+				   const struct c_can_tx_ring *ring)
+{
+	u8 head = c_can_get_tx_head(ring);
+	u8 tail = c_can_get_tx_tail(ring);
+
+	if (priv->type == BOSCH_D_CAN)
+		return ring->obj_num - (ring->head - ring->tail);
+
+	/* This is not a FIFO. C/D_CAN sends out the buffers
+	 * prioritized. The lowest buffer number wins.
+	 */
+	if (head < tail)
+		return 0;
+
+	return ring->obj_num - head;
+}
+
+#endif /* C_CAN_H */
diff --git a/drivers/net/can/c_can/c_can_ethtool.c b/drivers/net/can/c_can/c_can_ethtool.c
new file mode 100644
index 000000000..e41167eda
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_ethtool.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2021, Dario Binacchi <dariobin@libero.it>
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+static void c_can_get_ringparam(struct net_device *netdev,
+				struct ethtool_ringparam *ring,
+				struct kernel_ethtool_ringparam *kernel_ring,
+				struct netlink_ext_ack *extack)
+{
+	struct c_can_priv *priv = netdev_priv(netdev);
+
+	ring->rx_max_pending = priv->msg_obj_num;
+	ring->tx_max_pending = priv->msg_obj_num;
+	ring->rx_pending = priv->msg_obj_rx_num;
+	ring->tx_pending = priv->msg_obj_tx_num;
+}
+
+const struct ethtool_ops c_can_ethtool_ops = {
+	.get_ringparam = c_can_get_ringparam,
+	.get_ts_info = ethtool_op_get_ts_info,
+};
diff --git a/drivers/net/can/c_can/c_can_main.c b/drivers/net/can/c_can/c_can_main.c
new file mode 100644
index 000000000..c63f7fc1e
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_main.c
@@ -0,0 +1,1380 @@
+/*
+ * CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * TX and RX NAPI implementation has been borrowed from at91 CAN driver
+ * written by:
+ * Copyright
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
+ * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include "c_can.h"
+
+/* Number of interface registers */
+#define IF_ENUM_REG_LEN		11
+#define C_CAN_IFACE(reg, iface)	(C_CAN_IF1_##reg + (iface) * IF_ENUM_REG_LEN)
+
+/* control extension register D_CAN specific */
+#define CONTROL_EX_PDR		BIT(8)
+
+/* control register */
+#define CONTROL_SWR		BIT(15)
+#define CONTROL_TEST		BIT(7)
+#define CONTROL_CCE		BIT(6)
+#define CONTROL_DISABLE_AR	BIT(5)
+#define CONTROL_ENABLE_AR	(0 << 5)
+#define CONTROL_EIE		BIT(3)
+#define CONTROL_SIE		BIT(2)
+#define CONTROL_IE		BIT(1)
+#define CONTROL_INIT		BIT(0)
+
+#define CONTROL_IRQMSK		(CONTROL_EIE | CONTROL_IE | CONTROL_SIE)
+
+/* test register */
+#define TEST_RX			BIT(7)
+#define TEST_TX1		BIT(6)
+#define TEST_TX2		BIT(5)
+#define TEST_LBACK		BIT(4)
+#define TEST_SILENT		BIT(3)
+#define TEST_BASIC		BIT(2)
+
+/* status register */
+#define STATUS_PDA		BIT(10)
+#define STATUS_BOFF		BIT(7)
+#define STATUS_EWARN		BIT(6)
+#define STATUS_EPASS		BIT(5)
+#define STATUS_RXOK		BIT(4)
+#define STATUS_TXOK		BIT(3)
+
+/* error counter register */
+#define ERR_CNT_TEC_MASK	0xff
+#define ERR_CNT_TEC_SHIFT	0
+#define ERR_CNT_REC_SHIFT	8
+#define ERR_CNT_REC_MASK	(0x7f << ERR_CNT_REC_SHIFT)
+#define ERR_CNT_RP_SHIFT	15
+#define ERR_CNT_RP_MASK		(0x1 << ERR_CNT_RP_SHIFT)
+
+/* bit-timing register */
+#define BTR_BRP_MASK		0x3f
+#define BTR_BRP_SHIFT		0
+#define BTR_SJW_SHIFT		6
+#define BTR_SJW_MASK		(0x3 << BTR_SJW_SHIFT)
+#define BTR_TSEG1_SHIFT		8
+#define BTR_TSEG1_MASK		(0xf << BTR_TSEG1_SHIFT)
+#define BTR_TSEG2_SHIFT		12
+#define BTR_TSEG2_MASK		(0x7 << BTR_TSEG2_SHIFT)
+
+/* interrupt register */
+#define INT_STS_PENDING		0x8000
+
+/* brp extension register */
+#define BRP_EXT_BRPE_MASK	0x0f
+#define BRP_EXT_BRPE_SHIFT	0
+
+/* IFx command request */
+#define IF_COMR_BUSY		BIT(15)
+
+/* IFx command mask */
+#define IF_COMM_WR		BIT(7)
+#define IF_COMM_MASK		BIT(6)
+#define IF_COMM_ARB		BIT(5)
+#define IF_COMM_CONTROL		BIT(4)
+#define IF_COMM_CLR_INT_PND	BIT(3)
+#define IF_COMM_TXRQST		BIT(2)
+#define IF_COMM_CLR_NEWDAT	IF_COMM_TXRQST
+#define IF_COMM_DATAA		BIT(1)
+#define IF_COMM_DATAB		BIT(0)
+
+/* TX buffer setup */
+#define IF_COMM_TX		(IF_COMM_ARB | IF_COMM_CONTROL | \
+				 IF_COMM_TXRQST |		 \
+				 IF_COMM_DATAA | IF_COMM_DATAB)
+
+/* For the low buffers we clear the interrupt bit, but keep newdat */
+#define IF_COMM_RCV_LOW		(IF_COMM_MASK | IF_COMM_ARB | \
+				 IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \
+				 IF_COMM_DATAA | IF_COMM_DATAB)
+
+/* For the high buffers we clear the interrupt bit and newdat */
+#define IF_COMM_RCV_HIGH	(IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT)
+
+/* Receive setup of message objects */
+#define IF_COMM_RCV_SETUP	(IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL)
+
+/* Invalidation of message objects */
+#define IF_COMM_INVAL		(IF_COMM_ARB | IF_COMM_CONTROL)
+
+/* IFx arbitration */
+#define IF_ARB_MSGVAL		BIT(31)
+#define IF_ARB_MSGXTD		BIT(30)
+#define IF_ARB_TRANSMIT		BIT(29)
+
+/* IFx message control */
+#define IF_MCONT_NEWDAT		BIT(15)
+#define IF_MCONT_MSGLST		BIT(14)
+#define IF_MCONT_INTPND		BIT(13)
+#define IF_MCONT_UMASK		BIT(12)
+#define IF_MCONT_TXIE		BIT(11)
+#define IF_MCONT_RXIE		BIT(10)
+#define IF_MCONT_RMTEN		BIT(9)
+#define IF_MCONT_TXRQST		BIT(8)
+#define IF_MCONT_EOB		BIT(7)
+#define IF_MCONT_DLC_MASK	0xf
+
+#define IF_MCONT_RCV		(IF_MCONT_RXIE | IF_MCONT_UMASK)
+#define IF_MCONT_RCV_EOB	(IF_MCONT_RCV | IF_MCONT_EOB)
+
+#define IF_MCONT_TX		(IF_MCONT_TXIE | IF_MCONT_EOB)
+
+/* Use IF1 in NAPI path and IF2 in TX path */
+#define IF_NAPI			0
+#define IF_TX			1
+
+/* minimum timeout for checking BUSY status */
+#define MIN_TIMEOUT_VALUE	6
+
+/* Wait for ~1 sec for INIT bit */
+#define INIT_WAIT_MS		1000
+
+/* c_can lec values */
+enum c_can_lec_type {
+	LEC_NO_ERROR = 0,
+	LEC_STUFF_ERROR,
+	LEC_FORM_ERROR,
+	LEC_ACK_ERROR,
+	LEC_BIT1_ERROR,
+	LEC_BIT0_ERROR,
+	LEC_CRC_ERROR,
+	LEC_UNUSED,
+	LEC_MASK = LEC_UNUSED,
+};
+
+/* c_can error types:
+ * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported
+ */
+enum c_can_bus_error_types {
+	C_CAN_NO_ERROR = 0,
+	C_CAN_BUS_OFF,
+	C_CAN_ERROR_WARNING,
+	C_CAN_ERROR_PASSIVE,
+};
+
+static const struct can_bittiming_const c_can_bittiming_const = {
+	.name = KBUILD_MODNAME,
+	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
+	.tseg1_max = 16,
+	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 1024,	/* 6-bit BRP field + 4-bit BRPE field*/
+	.brp_inc = 1,
+};
+
+static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
+{
+	if (priv->device)
+		pm_runtime_get_sync(priv->device);
+}
+
+static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
+{
+	if (priv->device)
+		pm_runtime_put_sync(priv->device);
+}
+
+static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
+{
+	if (priv->raminit)
+		priv->raminit(priv, enable);
+}
+
+static void c_can_irq_control(struct c_can_priv *priv, bool enable)
+{
+	u32 ctrl = priv->read_reg(priv,	C_CAN_CTRL_REG) & ~CONTROL_IRQMSK;
+
+	if (enable)
+		ctrl |= CONTROL_IRQMSK;
+
+	priv->write_reg(priv, C_CAN_CTRL_REG, ctrl);
+}
+
+static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface);
+
+	priv->write_reg32(priv, reg, (cmd << 16) | obj);
+
+	for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) {
+		if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY))
+			return;
+		udelay(1);
+	}
+	netdev_err(dev, "Updating object timed out\n");
+}
+
+static inline void c_can_object_get(struct net_device *dev, int iface,
+				    u32 obj, u32 cmd)
+{
+	c_can_obj_update(dev, iface, cmd, obj);
+}
+
+static inline void c_can_object_put(struct net_device *dev, int iface,
+				    u32 obj, u32 cmd)
+{
+	c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
+}
+
+/* Note: According to documentation clearing TXIE while MSGVAL is set
+ * is not allowed, but works nicely on C/DCAN. And that lowers the I/O
+ * load significantly.
+ */
+static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0);
+	c_can_object_put(dev, iface, obj, IF_COMM_INVAL);
+}
+
+static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
+	c_can_inval_tx_object(dev, iface, obj);
+}
+
+static void c_can_setup_tx_object(struct net_device *dev, int iface,
+				  struct can_frame *frame, int idx)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	u16 ctrl = IF_MCONT_TX | frame->len;
+	bool rtr = frame->can_id & CAN_RTR_FLAG;
+	u32 arb = IF_ARB_MSGVAL;
+	int i;
+
+	if (frame->can_id & CAN_EFF_FLAG) {
+		arb |= frame->can_id & CAN_EFF_MASK;
+		arb |= IF_ARB_MSGXTD;
+	} else {
+		arb |= (frame->can_id & CAN_SFF_MASK) << 18;
+	}
+
+	if (!rtr)
+		arb |= IF_ARB_TRANSMIT;
+
+	/* If we change the DIR bit, we need to invalidate the buffer
+	 * first, i.e. clear the MSGVAL flag in the arbiter.
+	 */
+	if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
+		u32 obj = idx + priv->msg_obj_tx_first;
+
+		c_can_inval_msg_object(dev, iface, obj);
+		change_bit(idx, &priv->tx_dir);
+	}
+
+	priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
+
+	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
+
+	if (priv->type == BOSCH_D_CAN) {
+		u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface);
+
+		for (i = 0; i < frame->len; i += 4, dreg += 2) {
+			data = (u32)frame->data[i];
+			data |= (u32)frame->data[i + 1] << 8;
+			data |= (u32)frame->data[i + 2] << 16;
+			data |= (u32)frame->data[i + 3] << 24;
+			priv->write_reg32(priv, dreg, data);
+		}
+	} else {
+		for (i = 0; i < frame->len; i += 2) {
+			priv->write_reg(priv,
+					C_CAN_IFACE(DATA1_REG, iface) + i / 2,
+					frame->data[i] |
+					(frame->data[i + 1] << 8));
+		}
+	}
+}
+
+static int c_can_handle_lost_msg_obj(struct net_device *dev,
+				     int iface, int objno, u32 ctrl)
+{
+	struct net_device_stats *stats = &dev->stats;
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct can_frame *frame;
+	struct sk_buff *skb;
+
+	ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT);
+	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
+	c_can_object_put(dev, iface, objno, IF_COMM_CONTROL);
+
+	stats->rx_errors++;
+	stats->rx_over_errors++;
+
+	/* create an error msg */
+	skb = alloc_can_err_skb(dev, &frame);
+	if (unlikely(!skb))
+		return 0;
+
+	frame->can_id |= CAN_ERR_CRTL;
+	frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+	netif_receive_skb(skb);
+	return 1;
+}
+
+static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl)
+{
+	struct net_device_stats *stats = &dev->stats;
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct can_frame *frame;
+	struct sk_buff *skb;
+	u32 arb, data;
+
+	skb = alloc_can_skb(dev, &frame);
+	if (!skb) {
+		stats->rx_dropped++;
+		return -ENOMEM;
+	}
+
+	frame->len = can_cc_dlc2len(ctrl & 0x0F);
+
+	arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface));
+
+	if (arb & IF_ARB_MSGXTD)
+		frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG;
+	else
+		frame->can_id = (arb >> 18) & CAN_SFF_MASK;
+
+	if (arb & IF_ARB_TRANSMIT) {
+		frame->can_id |= CAN_RTR_FLAG;
+	} else {
+		int i, dreg = C_CAN_IFACE(DATA1_REG, iface);
+
+		if (priv->type == BOSCH_D_CAN) {
+			for (i = 0; i < frame->len; i += 4, dreg += 2) {
+				data = priv->read_reg32(priv, dreg);
+				frame->data[i] = data;
+				frame->data[i + 1] = data >> 8;
+				frame->data[i + 2] = data >> 16;
+				frame->data[i + 3] = data >> 24;
+			}
+		} else {
+			for (i = 0; i < frame->len; i += 2, dreg++) {
+				data = priv->read_reg(priv, dreg);
+				frame->data[i] = data;
+				frame->data[i + 1] = data >> 8;
+			}
+		}
+
+		stats->rx_bytes += frame->len;
+	}
+	stats->rx_packets++;
+
+	netif_receive_skb(skb);
+	return 0;
+}
+
+static void c_can_setup_receive_object(struct net_device *dev, int iface,
+				       u32 obj, u32 mask, u32 id, u32 mcont)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	mask |= BIT(29);
+	priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask);
+
+	id |= IF_ARB_MSGVAL;
+	priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id);
+
+	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont);
+	c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
+}
+
+static bool c_can_tx_busy(const struct c_can_priv *priv,
+			  const struct c_can_tx_ring *tx_ring)
+{
+	if (c_can_get_tx_free(priv, tx_ring) > 0)
+		return false;
+
+	netif_stop_queue(priv->dev);
+
+	/* Memory barrier before checking tx_free (head and tail) */
+	smp_mb();
+
+	if (c_can_get_tx_free(priv, tx_ring) == 0) {
+		netdev_dbg(priv->dev,
+			   "Stopping tx-queue (tx_head=0x%08x, tx_tail=0x%08x, len=%d).\n",
+			   tx_ring->head, tx_ring->tail,
+			   tx_ring->head - tx_ring->tail);
+		return true;
+	}
+
+	netif_start_queue(priv->dev);
+	return false;
+}
+
+static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
+				    struct net_device *dev)
+{
+	struct can_frame *frame = (struct can_frame *)skb->data;
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct c_can_tx_ring *tx_ring = &priv->tx;
+	u32 idx, obj, cmd = IF_COMM_TX;
+
+	if (can_dev_dropped_skb(dev, skb))
+		return NETDEV_TX_OK;
+
+	if (c_can_tx_busy(priv, tx_ring))
+		return NETDEV_TX_BUSY;
+
+	idx = c_can_get_tx_head(tx_ring);
+	tx_ring->head++;
+	if (c_can_get_tx_free(priv, tx_ring) == 0)
+		netif_stop_queue(dev);
+
+	if (idx < c_can_get_tx_tail(tx_ring))
+		cmd &= ~IF_COMM_TXRQST; /* Cache the message */
+
+	/* Store the message in the interface so we can call
+	 * can_put_echo_skb(). We must do this before we enable
+	 * transmit as we might race against do_tx().
+	 */
+	c_can_setup_tx_object(dev, IF_TX, frame, idx);
+	can_put_echo_skb(skb, dev, idx, 0);
+	obj = idx + priv->msg_obj_tx_first;
+	c_can_object_put(dev, IF_TX, obj, cmd);
+
+	return NETDEV_TX_OK;
+}
+
+static int c_can_wait_for_ctrl_init(struct net_device *dev,
+				    struct c_can_priv *priv, u32 init)
+{
+	int retry = 0;
+
+	while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) {
+		udelay(10);
+		if (retry++ > 1000) {
+			netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+static int c_can_set_bittiming(struct net_device *dev)
+{
+	unsigned int reg_btr, reg_brpe, ctrl_save;
+	u8 brp, brpe, sjw, tseg1, tseg2;
+	u32 ten_bit_brp;
+	struct c_can_priv *priv = netdev_priv(dev);
+	const struct can_bittiming *bt = &priv->can.bittiming;
+	int res;
+
+	/* c_can provides a 6-bit brp and 4-bit brpe fields */
+	ten_bit_brp = bt->brp - 1;
+	brp = ten_bit_brp & BTR_BRP_MASK;
+	brpe = ten_bit_brp >> 6;
+
+	sjw = bt->sjw - 1;
+	tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
+	tseg2 = bt->phase_seg2 - 1;
+	reg_btr = brp | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) |
+			(tseg2 << BTR_TSEG2_SHIFT);
+	reg_brpe = brpe & BRP_EXT_BRPE_MASK;
+
+	netdev_info(dev,
+		    "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
+
+	ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
+	ctrl_save &= ~CONTROL_INIT;
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT);
+	res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT);
+	if (res)
+		return res;
+
+	priv->write_reg(priv, C_CAN_BTR_REG, reg_btr);
+	priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe);
+	priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save);
+
+	return c_can_wait_for_ctrl_init(dev, priv, 0);
+}
+
+/* Configure C_CAN message objects for Tx and Rx purposes:
+ * C_CAN provides a total of 32 message objects that can be configured
+ * either for Tx or Rx purposes. Here the first 16 message objects are used as
+ * a reception FIFO. The end of reception FIFO is signified by the EoB bit
+ * being SET. The remaining 16 message objects are kept aside for Tx purposes.
+ * See user guide document for further details on configuring message
+ * objects.
+ */
+static void c_can_configure_msg_objects(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int i;
+
+	/* first invalidate all message objects */
+	for (i = priv->msg_obj_rx_first; i <= priv->msg_obj_num; i++)
+		c_can_inval_msg_object(dev, IF_NAPI, i);
+
+	/* setup receive message objects */
+	for (i = priv->msg_obj_rx_first; i < priv->msg_obj_rx_last; i++)
+		c_can_setup_receive_object(dev, IF_NAPI, i, 0, 0, IF_MCONT_RCV);
+
+	c_can_setup_receive_object(dev, IF_NAPI, priv->msg_obj_rx_last, 0, 0,
+				   IF_MCONT_RCV_EOB);
+}
+
+static int c_can_software_reset(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int retry = 0;
+
+	if (priv->type != BOSCH_D_CAN)
+		return 0;
+
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_SWR | CONTROL_INIT);
+	while (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_SWR) {
+		msleep(20);
+		if (retry++ > 100) {
+			netdev_err(dev, "CCTRL: software reset failed\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/* Configure C_CAN chip:
+ * - enable/disable auto-retransmission
+ * - set operating mode
+ * - configure message objects
+ */
+static int c_can_chip_config(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct c_can_tx_ring *tx_ring = &priv->tx;
+	int err;
+
+	err = c_can_software_reset(dev);
+	if (err)
+		return err;
+
+	/* enable automatic retransmission */
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR);
+
+	if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+	    (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
+		/* loopback + silent mode : useful for hot self-test */
+		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+		priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT);
+	} else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
+		/* loopback mode : useful for self-test function */
+		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+		priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK);
+	} else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
+		/* silent mode : bus-monitoring mode */
+		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+		priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT);
+	}
+
+	/* configure message objects */
+	c_can_configure_msg_objects(dev);
+
+	/* set a `lec` value so that we can check for updates later */
+	priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+
+	/* Clear all internal status */
+	tx_ring->head = 0;
+	tx_ring->tail = 0;
+	priv->tx_dir = 0;
+
+	/* set bittiming params */
+	return c_can_set_bittiming(dev);
+}
+
+static int c_can_start(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int err;
+	struct pinctrl *p;
+
+	/* basic c_can configuration */
+	err = c_can_chip_config(dev);
+	if (err)
+		return err;
+
+	/* Setup the command for new messages */
+	priv->comm_rcv_high = priv->type != BOSCH_D_CAN ?
+		IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH;
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	/* Attempt to use "active" if available else use "default" */
+	p = pinctrl_get_select(priv->device, "active");
+	if (!IS_ERR(p))
+		pinctrl_put(p);
+	else
+		pinctrl_pm_select_default_state(priv->device);
+
+	return 0;
+}
+
+static void c_can_stop(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	c_can_irq_control(priv, false);
+
+	/* put ctrl to init on stop to end ongoing transmission */
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT);
+
+	/* deactivate pins */
+	pinctrl_pm_select_sleep_state(dev->dev.parent);
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int err;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		err = c_can_start(dev);
+		if (err)
+			return err;
+		netif_wake_queue(dev);
+		c_can_irq_control(priv, true);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int __c_can_get_berr_counter(const struct net_device *dev,
+				    struct can_berr_counter *bec)
+{
+	unsigned int reg_err_counter;
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
+	bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
+				ERR_CNT_REC_SHIFT;
+	bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
+
+	return 0;
+}
+
+static int c_can_get_berr_counter(const struct net_device *dev,
+				  struct can_berr_counter *bec)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int err;
+
+	c_can_pm_runtime_get_sync(priv);
+	err = __c_can_get_berr_counter(dev, bec);
+	c_can_pm_runtime_put_sync(priv);
+
+	return err;
+}
+
+static void c_can_do_tx(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct c_can_tx_ring *tx_ring = &priv->tx;
+	struct net_device_stats *stats = &dev->stats;
+	u32 idx, obj, pkts = 0, bytes = 0, pend;
+	u8 tail;
+
+	if (priv->msg_obj_tx_last > 32)
+		pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
+	else
+		pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+
+	while ((idx = ffs(pend))) {
+		idx--;
+		pend &= ~BIT(idx);
+		obj = idx + priv->msg_obj_tx_first;
+
+		/* We use IF_NAPI interface instead of IF_TX because we
+		 * are called from c_can_poll(), which runs inside
+		 * NAPI. We are not transmitting.
+		 */
+		c_can_inval_tx_object(dev, IF_NAPI, obj);
+		bytes += can_get_echo_skb(dev, idx, NULL);
+		pkts++;
+	}
+
+	if (!pkts)
+		return;
+
+	tx_ring->tail += pkts;
+	if (c_can_get_tx_free(priv, tx_ring)) {
+		/* Make sure that anybody stopping the queue after
+		 * this sees the new tx_ring->tail.
+		 */
+		smp_mb();
+		netif_wake_queue(priv->dev);
+	}
+
+	stats->tx_bytes += bytes;
+	stats->tx_packets += pkts;
+
+	tail = c_can_get_tx_tail(tx_ring);
+	if (priv->type == BOSCH_D_CAN && tail == 0) {
+		u8 head = c_can_get_tx_head(tx_ring);
+
+		/* Start transmission for all cached messages */
+		for (idx = tail; idx < head; idx++) {
+			obj = idx + priv->msg_obj_tx_first;
+			c_can_object_put(dev, IF_NAPI, obj, IF_COMM_TXRQST);
+		}
+	}
+}
+
+/* If we have a gap in the pending bits, that means we either
+ * raced with the hardware or failed to readout all upper
+ * objects in the last run due to quota limit.
+ */
+static u32 c_can_adjust_pending(u32 pend, u32 rx_mask)
+{
+	u32 weight, lasts;
+
+	if (pend == rx_mask)
+		return pend;
+
+	/* If the last set bit is larger than the number of pending
+	 * bits we have a gap.
+	 */
+	weight = hweight32(pend);
+	lasts = fls(pend);
+
+	/* If the bits are linear, nothing to do */
+	if (lasts == weight)
+		return pend;
+
+	/* Find the first set bit after the gap. We walk backwards
+	 * from the last set bit.
+	 */
+	for (lasts--; pend & BIT(lasts - 1); lasts--)
+		;
+
+	return pend & ~GENMASK(lasts - 1, 0);
+}
+
+static inline void c_can_rx_object_get(struct net_device *dev,
+				       struct c_can_priv *priv, u32 obj)
+{
+	c_can_object_get(dev, IF_NAPI, obj, priv->comm_rcv_high);
+}
+
+static inline void c_can_rx_finalize(struct net_device *dev,
+				     struct c_can_priv *priv, u32 obj)
+{
+	if (priv->type != BOSCH_D_CAN)
+		c_can_object_get(dev, IF_NAPI, obj, IF_COMM_CLR_NEWDAT);
+}
+
+static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
+			      u32 pend, int quota)
+{
+	u32 pkts = 0, ctrl, obj;
+
+	while ((obj = ffs(pend)) && quota > 0) {
+		pend &= ~BIT(obj - 1);
+
+		c_can_rx_object_get(dev, priv, obj);
+		ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_NAPI));
+
+		if (ctrl & IF_MCONT_MSGLST) {
+			int n;
+
+			n = c_can_handle_lost_msg_obj(dev, IF_NAPI, obj, ctrl);
+
+			pkts += n;
+			quota -= n;
+			continue;
+		}
+
+		/* This really should not happen, but this covers some
+		 * odd HW behaviour. Do not remove that unless you
+		 * want to brick your machine.
+		 */
+		if (!(ctrl & IF_MCONT_NEWDAT))
+			continue;
+
+		/* read the data from the message object */
+		c_can_read_msg_object(dev, IF_NAPI, ctrl);
+
+		c_can_rx_finalize(dev, priv, obj);
+
+		pkts++;
+		quota--;
+	}
+
+	return pkts;
+}
+
+static inline u32 c_can_get_pending(struct c_can_priv *priv)
+{
+	u32 pend;
+
+	if (priv->msg_obj_rx_last > 16)
+		pend = priv->read_reg32(priv, C_CAN_NEWDAT1_REG);
+	else
+		pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
+
+	return pend;
+}
+
+/* theory of operation:
+ *
+ * c_can core saves a received CAN message into the first free message
+ * object it finds free (starting with the lowest). Bits NEWDAT and
+ * INTPND are set for this message object indicating that a new message
+ * has arrived.
+ *
+ * We clear the newdat bit right away.
+ *
+ * This can result in packet reordering when the readout is slow.
+ */
+static int c_can_do_rx_poll(struct net_device *dev, int quota)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	u32 pkts = 0, pend = 0, toread, n;
+
+	while (quota > 0) {
+		if (!pend) {
+			pend = c_can_get_pending(priv);
+			if (!pend)
+				break;
+			/* If the pending field has a gap, handle the
+			 * bits above the gap first.
+			 */
+			toread = c_can_adjust_pending(pend,
+						      priv->msg_obj_rx_mask);
+		} else {
+			toread = pend;
+		}
+		/* Remove the bits from pend */
+		pend &= ~toread;
+		/* Read the objects */
+		n = c_can_read_objects(dev, priv, toread, quota);
+		pkts += n;
+		quota -= n;
+	}
+
+	return pkts;
+}
+
+static int c_can_handle_state_change(struct net_device *dev,
+				     enum c_can_bus_error_types error_type)
+{
+	unsigned int reg_err_counter;
+	unsigned int rx_err_passive;
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	struct can_berr_counter bec;
+
+	switch (error_type) {
+	case C_CAN_NO_ERROR:
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		break;
+	case C_CAN_ERROR_WARNING:
+		/* error warning state */
+		priv->can.can_stats.error_warning++;
+		priv->can.state = CAN_STATE_ERROR_WARNING;
+		break;
+	case C_CAN_ERROR_PASSIVE:
+		/* error passive state */
+		priv->can.can_stats.error_passive++;
+		priv->can.state = CAN_STATE_ERROR_PASSIVE;
+		break;
+	case C_CAN_BUS_OFF:
+		/* bus-off state */
+		priv->can.state = CAN_STATE_BUS_OFF;
+		priv->can.can_stats.bus_off++;
+		break;
+	default:
+		break;
+	}
+
+	/* propagate the error condition to the CAN stack */
+	skb = alloc_can_err_skb(dev, &cf);
+	if (unlikely(!skb))
+		return 0;
+
+	__c_can_get_berr_counter(dev, &bec);
+	reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
+	rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >>
+				ERR_CNT_RP_SHIFT;
+
+	switch (error_type) {
+	case C_CAN_NO_ERROR:
+		cf->can_id |= CAN_ERR_CRTL | CAN_ERR_CNT;
+		cf->data[1] = CAN_ERR_CRTL_ACTIVE;
+		cf->data[6] = bec.txerr;
+		cf->data[7] = bec.rxerr;
+		break;
+	case C_CAN_ERROR_WARNING:
+		/* error warning state */
+		cf->can_id |= CAN_ERR_CRTL | CAN_ERR_CNT;
+		cf->data[1] = (bec.txerr > bec.rxerr) ?
+			CAN_ERR_CRTL_TX_WARNING :
+			CAN_ERR_CRTL_RX_WARNING;
+		cf->data[6] = bec.txerr;
+		cf->data[7] = bec.rxerr;
+
+		break;
+	case C_CAN_ERROR_PASSIVE:
+		/* error passive state */
+		cf->can_id |= CAN_ERR_CRTL | CAN_ERR_CNT;
+		if (rx_err_passive)
+			cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+		if (bec.txerr > 127)
+			cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
+
+		cf->data[6] = bec.txerr;
+		cf->data[7] = bec.rxerr;
+		break;
+	case C_CAN_BUS_OFF:
+		/* bus-off state */
+		cf->can_id |= CAN_ERR_BUSOFF;
+		can_bus_off(dev);
+		break;
+	default:
+		break;
+	}
+
+	netif_receive_skb(skb);
+
+	return 1;
+}
+
+static int c_can_handle_bus_err(struct net_device *dev,
+				enum c_can_lec_type lec_type)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	/* early exit if no lec update or no error.
+	 * no lec update means that no CAN bus event has been detected
+	 * since CPU wrote 0x7 value to status reg.
+	 */
+	if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR)
+		return 0;
+
+	if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING))
+		return 0;
+
+	/* common for all type of bus errors */
+	priv->can.can_stats.bus_error++;
+	stats->rx_errors++;
+
+	/* propagate the error condition to the CAN stack */
+	skb = alloc_can_err_skb(dev, &cf);
+	if (unlikely(!skb))
+		return 0;
+
+	/* check for 'last error code' which tells us the
+	 * type of the last error to occur on the CAN bus
+	 */
+	cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+	switch (lec_type) {
+	case LEC_STUFF_ERROR:
+		netdev_dbg(dev, "stuff error\n");
+		cf->data[2] |= CAN_ERR_PROT_STUFF;
+		break;
+	case LEC_FORM_ERROR:
+		netdev_dbg(dev, "form error\n");
+		cf->data[2] |= CAN_ERR_PROT_FORM;
+		break;
+	case LEC_ACK_ERROR:
+		netdev_dbg(dev, "ack error\n");
+		cf->data[3] = CAN_ERR_PROT_LOC_ACK;
+		break;
+	case LEC_BIT1_ERROR:
+		netdev_dbg(dev, "bit1 error\n");
+		cf->data[2] |= CAN_ERR_PROT_BIT1;
+		break;
+	case LEC_BIT0_ERROR:
+		netdev_dbg(dev, "bit0 error\n");
+		cf->data[2] |= CAN_ERR_PROT_BIT0;
+		break;
+	case LEC_CRC_ERROR:
+		netdev_dbg(dev, "CRC error\n");
+		cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
+		break;
+	default:
+		break;
+	}
+
+	netif_receive_skb(skb);
+	return 1;
+}
+
+static int c_can_poll(struct napi_struct *napi, int quota)
+{
+	struct net_device *dev = napi->dev;
+	struct c_can_priv *priv = netdev_priv(dev);
+	u16 curr, last = priv->last_status;
+	int work_done = 0;
+
+	/* Only read the status register if a status interrupt was pending */
+	if (atomic_xchg(&priv->sie_pending, 0)) {
+		priv->last_status = priv->read_reg(priv, C_CAN_STS_REG);
+		curr = priv->last_status;
+		/* Ack status on C_CAN. D_CAN is self clearing */
+		if (priv->type != BOSCH_D_CAN)
+			priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+	} else {
+		/* no change detected ... */
+		curr = last;
+	}
+
+	/* handle state changes */
+	if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
+		netdev_dbg(dev, "entered error warning state\n");
+		work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING);
+	}
+
+	if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) {
+		netdev_dbg(dev, "entered error passive state\n");
+		work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE);
+	}
+
+	if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) {
+		netdev_dbg(dev, "entered bus off state\n");
+		work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF);
+		goto end;
+	}
+
+	/* handle bus recovery events */
+	if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) {
+		netdev_dbg(dev, "left bus off state\n");
+		work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE);
+	}
+
+	if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) {
+		netdev_dbg(dev, "left error passive state\n");
+		work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING);
+	}
+
+	if ((!(curr & STATUS_EWARN)) && (last & STATUS_EWARN)) {
+		netdev_dbg(dev, "left error warning state\n");
+		work_done += c_can_handle_state_change(dev, C_CAN_NO_ERROR);
+	}
+
+	/* handle lec errors on the bus */
+	work_done += c_can_handle_bus_err(dev, curr & LEC_MASK);
+
+	/* Handle Tx/Rx events. We do this unconditionally */
+	work_done += c_can_do_rx_poll(dev, (quota - work_done));
+	c_can_do_tx(dev);
+
+end:
+	if (work_done < quota) {
+		napi_complete_done(napi, work_done);
+		/* enable all IRQs if we are not in bus off state */
+		if (priv->can.state != CAN_STATE_BUS_OFF)
+			c_can_irq_control(priv, true);
+	}
+
+	return work_done;
+}
+
+static irqreturn_t c_can_isr(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct c_can_priv *priv = netdev_priv(dev);
+	int reg_int;
+
+	reg_int = priv->read_reg(priv, C_CAN_INT_REG);
+	if (!reg_int)
+		return IRQ_NONE;
+
+	/* save for later use */
+	if (reg_int & INT_STS_PENDING)
+		atomic_set(&priv->sie_pending, 1);
+
+	/* disable all interrupts and schedule the NAPI */
+	c_can_irq_control(priv, false);
+	napi_schedule(&priv->napi);
+
+	return IRQ_HANDLED;
+}
+
+static int c_can_open(struct net_device *dev)
+{
+	int err;
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	c_can_pm_runtime_get_sync(priv);
+	c_can_reset_ram(priv, true);
+
+	/* open the can device */
+	err = open_candev(dev);
+	if (err) {
+		netdev_err(dev, "failed to open can device\n");
+		goto exit_open_fail;
+	}
+
+	/* register interrupt handler */
+	err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name,
+			  dev);
+	if (err < 0) {
+		netdev_err(dev, "failed to request interrupt\n");
+		goto exit_irq_fail;
+	}
+
+	/* start the c_can controller */
+	err = c_can_start(dev);
+	if (err)
+		goto exit_start_fail;
+
+	napi_enable(&priv->napi);
+	/* enable status change, error and module interrupts */
+	c_can_irq_control(priv, true);
+	netif_start_queue(dev);
+
+	return 0;
+
+exit_start_fail:
+	free_irq(dev->irq, dev);
+exit_irq_fail:
+	close_candev(dev);
+exit_open_fail:
+	c_can_reset_ram(priv, false);
+	c_can_pm_runtime_put_sync(priv);
+	return err;
+}
+
+static int c_can_close(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	napi_disable(&priv->napi);
+	c_can_stop(dev);
+	free_irq(dev->irq, dev);
+	close_candev(dev);
+
+	c_can_reset_ram(priv, false);
+	c_can_pm_runtime_put_sync(priv);
+
+	return 0;
+}
+
+struct net_device *alloc_c_can_dev(int msg_obj_num)
+{
+	struct net_device *dev;
+	struct c_can_priv *priv;
+	int msg_obj_tx_num = msg_obj_num / 2;
+
+	dev = alloc_candev(sizeof(*priv), msg_obj_tx_num);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+	priv->msg_obj_num = msg_obj_num;
+	priv->msg_obj_rx_num = msg_obj_num - msg_obj_tx_num;
+	priv->msg_obj_rx_first = 1;
+	priv->msg_obj_rx_last =
+		priv->msg_obj_rx_first + priv->msg_obj_rx_num - 1;
+	priv->msg_obj_rx_mask = GENMASK(priv->msg_obj_rx_num - 1, 0);
+
+	priv->msg_obj_tx_num = msg_obj_tx_num;
+	priv->msg_obj_tx_first = priv->msg_obj_rx_last + 1;
+	priv->msg_obj_tx_last =
+		priv->msg_obj_tx_first + priv->msg_obj_tx_num - 1;
+
+	priv->tx.head = 0;
+	priv->tx.tail = 0;
+	priv->tx.obj_num = msg_obj_tx_num;
+
+	netif_napi_add_weight(dev, &priv->napi, c_can_poll,
+			      priv->msg_obj_rx_num);
+
+	priv->dev = dev;
+	priv->can.bittiming_const = &c_can_bittiming_const;
+	priv->can.do_set_mode = c_can_set_mode;
+	priv->can.do_get_berr_counter = c_can_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+					CAN_CTRLMODE_LISTENONLY |
+					CAN_CTRLMODE_BERR_REPORTING;
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_c_can_dev);
+
+#ifdef CONFIG_PM
+int c_can_power_down(struct net_device *dev)
+{
+	u32 val;
+	unsigned long time_out;
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	if (!(dev->flags & IFF_UP))
+		return 0;
+
+	WARN_ON(priv->type != BOSCH_D_CAN);
+
+	/* set PDR value so the device goes to power down mode */
+	val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
+	val |= CONTROL_EX_PDR;
+	priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
+
+	/* Wait for the PDA bit to get set */
+	time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
+	while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
+	       time_after(time_out, jiffies))
+		cpu_relax();
+
+	if (time_after(jiffies, time_out))
+		return -ETIMEDOUT;
+
+	c_can_stop(dev);
+
+	c_can_reset_ram(priv, false);
+	c_can_pm_runtime_put_sync(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(c_can_power_down);
+
+int c_can_power_up(struct net_device *dev)
+{
+	u32 val;
+	unsigned long time_out;
+	struct c_can_priv *priv = netdev_priv(dev);
+	int ret;
+
+	if (!(dev->flags & IFF_UP))
+		return 0;
+
+	WARN_ON(priv->type != BOSCH_D_CAN);
+
+	c_can_pm_runtime_get_sync(priv);
+	c_can_reset_ram(priv, true);
+
+	/* Clear PDR and INIT bits */
+	val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
+	val &= ~CONTROL_EX_PDR;
+	priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
+	val = priv->read_reg(priv, C_CAN_CTRL_REG);
+	val &= ~CONTROL_INIT;
+	priv->write_reg(priv, C_CAN_CTRL_REG, val);
+
+	/* Wait for the PDA bit to get clear */
+	time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
+	while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
+	       time_after(time_out, jiffies))
+		cpu_relax();
+
+	if (time_after(jiffies, time_out)) {
+		ret = -ETIMEDOUT;
+		goto err_out;
+	}
+
+	ret = c_can_start(dev);
+	if (ret)
+		goto err_out;
+
+	c_can_irq_control(priv, true);
+
+	return 0;
+
+err_out:
+	c_can_reset_ram(priv, false);
+	c_can_pm_runtime_put_sync(priv);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(c_can_power_up);
+#endif
+
+void free_c_can_dev(struct net_device *dev)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	netif_napi_del(&priv->napi);
+	free_candev(dev);
+}
+EXPORT_SYMBOL_GPL(free_c_can_dev);
+
+static const struct net_device_ops c_can_netdev_ops = {
+	.ndo_open = c_can_open,
+	.ndo_stop = c_can_close,
+	.ndo_start_xmit = c_can_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
+};
+
+int register_c_can_dev(struct net_device *dev)
+{
+	/* Deactivate pins to prevent DRA7 DCAN IP from being
+	 * stuck in transition when module is disabled.
+	 * Pins are activated in c_can_start() and deactivated
+	 * in c_can_stop()
+	 */
+	pinctrl_pm_select_sleep_state(dev->dev.parent);
+
+	dev->flags |= IFF_ECHO;	/* we support local echo */
+	dev->netdev_ops = &c_can_netdev_ops;
+	dev->ethtool_ops = &c_can_ethtool_ops;
+
+	return register_candev(dev);
+}
+EXPORT_SYMBOL_GPL(register_c_can_dev);
+
+void unregister_c_can_dev(struct net_device *dev)
+{
+	unregister_candev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_c_can_dev);
+
+MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CAN bus driver for Bosch C_CAN controller");
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
new file mode 100644
index 000000000..bf2f8c3da
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -0,0 +1,297 @@
+/*
+ * PCI bus driver for Bosch C_CAN/D_CAN controller
+ *
+ * Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
+ *
+ * Borrowed from c_can_platform.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define PCI_DEVICE_ID_PCH_CAN	0x8818
+#define PCH_PCI_SOFT_RESET	0x01fc
+
+enum c_can_pci_reg_align {
+	C_CAN_REG_ALIGN_16,
+	C_CAN_REG_ALIGN_32,
+	C_CAN_REG_32,
+};
+
+struct c_can_pci_data {
+	/* Specify if is C_CAN or D_CAN */
+	enum c_can_dev_id type;
+	/* Number of message objects */
+	unsigned int msg_obj_num;
+	/* Set the register alignment in the memory */
+	enum c_can_pci_reg_align reg_align;
+	/* Set the frequency */
+	unsigned int freq;
+	/* PCI bar number */
+	int bar;
+	/* Callback for reset */
+	void (*init)(const struct c_can_priv *priv, bool enable);
+};
+
+/* 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
+					       enum reg index)
+{
+	return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
+						 enum reg index, u16 val)
+{
+	writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
+					       enum reg index)
+{
+	return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
+						 enum reg index, u16 val)
+{
+	writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv,
+				    enum reg index)
+{
+	return (u16)ioread32(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv,
+				      enum reg index, u16 val)
+{
+	iowrite32((u32)val, priv->base + 2 * priv->regs[index]);
+}
+
+static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	u32 val;
+
+	val = priv->read_reg(priv, index);
+	val |= ((u32)priv->read_reg(priv, index + 1)) << 16;
+
+	return val;
+}
+
+static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
+				  u32 val)
+{
+	priv->write_reg(priv, index + 1, val >> 16);
+	priv->write_reg(priv, index, val);
+}
+
+static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable)
+{
+	if (enable) {
+		u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET;
+
+		/* write to sw reset register */
+		iowrite32(1, addr);
+		iowrite32(0, addr);
+	}
+}
+
+static int c_can_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
+	struct c_can_priv *priv;
+	struct net_device *dev;
+	void __iomem *addr;
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device FAILED\n");
+		goto out;
+	}
+
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_request_regions FAILED\n");
+		goto out_disable_device;
+	}
+
+	ret = pci_enable_msi(pdev);
+	if (!ret) {
+		dev_info(&pdev->dev, "MSI enabled\n");
+		pci_set_master(pdev);
+	}
+
+	addr = pci_iomap(pdev, c_can_pci_data->bar,
+			 pci_resource_len(pdev, c_can_pci_data->bar));
+	if (!addr) {
+		dev_err(&pdev->dev,
+			"device has no PCI memory resources, failing adapter\n");
+		ret = -ENOMEM;
+		goto out_release_regions;
+	}
+
+	/* allocate the c_can device */
+	dev = alloc_c_can_dev(c_can_pci_data->msg_obj_num);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	priv = netdev_priv(dev);
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	dev->irq = pdev->irq;
+	priv->base = addr;
+	priv->device = &pdev->dev;
+
+	if (!c_can_pci_data->freq) {
+		dev_err(&pdev->dev, "no clock frequency defined\n");
+		ret = -ENODEV;
+		goto out_free_c_can;
+	} else {
+		priv->can.clock.freq = c_can_pci_data->freq;
+	}
+
+	/* Configure CAN type */
+	switch (c_can_pci_data->type) {
+	case BOSCH_C_CAN:
+		priv->regs = reg_map_c_can;
+		break;
+	case BOSCH_D_CAN:
+		priv->regs = reg_map_d_can;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_free_c_can;
+	}
+
+	priv->type = c_can_pci_data->type;
+
+	/* Configure access to registers */
+	switch (c_can_pci_data->reg_align) {
+	case C_CAN_REG_ALIGN_32:
+		priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
+		priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
+		break;
+	case C_CAN_REG_ALIGN_16:
+		priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
+		priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
+		break;
+	case C_CAN_REG_32:
+		priv->read_reg = c_can_pci_read_reg_32bit;
+		priv->write_reg = c_can_pci_write_reg_32bit;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_free_c_can;
+	}
+	priv->read_reg32 = c_can_pci_read_reg32;
+	priv->write_reg32 = c_can_pci_write_reg32;
+
+	priv->raminit = c_can_pci_data->init;
+
+	ret = register_c_can_dev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			KBUILD_MODNAME, ret);
+		goto out_free_c_can;
+	}
+
+	dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+		KBUILD_MODNAME, priv->regs, dev->irq);
+
+	return 0;
+
+out_free_c_can:
+	free_c_can_dev(dev);
+out_iounmap:
+	pci_iounmap(pdev, addr);
+out_release_regions:
+	pci_disable_msi(pdev);
+	pci_clear_master(pdev);
+	pci_release_regions(pdev);
+out_disable_device:
+	pci_disable_device(pdev);
+out:
+	return ret;
+}
+
+static void c_can_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
+	void __iomem *addr = priv->base;
+
+	unregister_c_can_dev(dev);
+
+	free_c_can_dev(dev);
+
+	pci_iounmap(pdev, addr);
+	pci_disable_msi(pdev);
+	pci_clear_master(pdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static const struct c_can_pci_data c_can_sta2x11 = {
+	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
+	.reg_align = C_CAN_REG_ALIGN_32,
+	.freq = 52000000, /* 52 Mhz */
+	.bar = 0,
+};
+
+static const struct c_can_pci_data c_can_pch = {
+	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
+	.reg_align = C_CAN_REG_32,
+	.freq = 50000000, /* 50 MHz */
+	.init = c_can_pci_reset_pch,
+	.bar = 1,
+};
+
+#define C_CAN_ID(_vend, _dev, _driverdata) {		\
+	PCI_DEVICE(_vend, _dev),			\
+	.driver_data = (unsigned long)&(_driverdata),	\
+}
+
+static const struct pci_device_id c_can_pci_tbl[] = {
+	C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
+		 c_can_sta2x11),
+	C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN,
+		 c_can_pch),
+	{},
+};
+
+static struct pci_driver c_can_pci_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = c_can_pci_tbl,
+	.probe = c_can_pci_probe,
+	.remove = c_can_pci_remove,
+};
+
+module_pci_driver(c_can_pci_driver);
+
+MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
+MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
new file mode 100644
index 000000000..86e95e9d6
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -0,0 +1,501 @@
+/*
+ * Platform CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define DCAN_RAM_INIT_BIT BIT(3)
+
+static DEFINE_SPINLOCK(raminit_lock);
+
+/* 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_plat_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
+						  enum reg index, u16 val)
+{
+	writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_plat_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
+						  enum reg index, u16 val)
+{
+	writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait_syscon(const struct c_can_priv *priv,
+					 u32 mask, u32 val)
+{
+	const struct c_can_raminit *raminit = &priv->raminit_sys;
+	int timeout = 0;
+	u32 ctrl = 0;
+
+	/* We look only at the bits of our instance. */
+	val &= mask;
+	do {
+		udelay(1);
+		timeout++;
+
+		regmap_read(raminit->syscon, raminit->reg, &ctrl);
+		if (timeout == 1000) {
+			dev_err(&priv->dev->dev, "%s: time out\n", __func__);
+			break;
+		}
+	} while ((ctrl & mask) != val);
+}
+
+static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
+{
+	const struct c_can_raminit *raminit = &priv->raminit_sys;
+	u32 ctrl = 0;
+	u32 mask;
+
+	spin_lock(&raminit_lock);
+
+	mask = 1 << raminit->bits.start | 1 << raminit->bits.done;
+	regmap_read(raminit->syscon, raminit->reg, &ctrl);
+
+	/* We clear the start bit first. The start bit is
+	 * looking at the 0 -> transition, but is not self clearing;
+	 * NOTE: DONE must be written with 1 to clear it.
+	 * We can't clear the DONE bit here using regmap_update_bits()
+	 * as it will bypass the write if initial condition is START:0 DONE:1
+	 * e.g. on DRA7 which needs START pulse.
+	 */
+	ctrl &= ~mask;	/* START = 0, DONE = 0 */
+	regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+
+	/* check if START bit is 0. Ignore DONE bit for now
+	 * as it can be either 0 or 1.
+	 */
+	c_can_hw_raminit_wait_syscon(priv, 1 << raminit->bits.start, ctrl);
+
+	if (enable) {
+		/* Clear DONE bit & set START bit. */
+		ctrl |= 1 << raminit->bits.start;
+		/* DONE must be written with 1 to clear it */
+		ctrl |= 1 << raminit->bits.done;
+		regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+		/* prevent further clearing of DONE bit */
+		ctrl &= ~(1 << raminit->bits.done);
+		/* clear START bit if start pulse is needed */
+		if (raminit->needs_pulse) {
+			ctrl &= ~(1 << raminit->bits.start);
+			regmap_update_bits(raminit->syscon, raminit->reg,
+					   mask, ctrl);
+		}
+
+		ctrl |= 1 << raminit->bits.done;
+		c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
+	}
+	spin_unlock(&raminit_lock);
+}
+
+static u32 c_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	u32 val;
+
+	val = priv->read_reg(priv, index);
+	val |= ((u32)priv->read_reg(priv, index + 1)) << 16;
+
+	return val;
+}
+
+static void c_can_plat_write_reg32(const struct c_can_priv *priv,
+				   enum reg index, u32 val)
+{
+	priv->write_reg(priv, index + 1, val >> 16);
+	priv->write_reg(priv, index, val);
+}
+
+static u32 d_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	return readl(priv->base + priv->regs[index]);
+}
+
+static void d_can_plat_write_reg32(const struct c_can_priv *priv,
+				   enum reg index, u32 val)
+{
+	writel(val, priv->base + priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask)
+{
+	while (priv->read_reg32(priv, C_CAN_FUNCTION_REG) & mask)
+		udelay(1);
+}
+
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+	u32 ctrl;
+
+	ctrl = priv->read_reg32(priv, C_CAN_FUNCTION_REG);
+	ctrl &= ~DCAN_RAM_INIT_BIT;
+	priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+	c_can_hw_raminit_wait(priv, ctrl);
+
+	if (enable) {
+		ctrl |= DCAN_RAM_INIT_BIT;
+		priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+		c_can_hw_raminit_wait(priv, ctrl);
+	}
+}
+
+static const struct c_can_driver_data c_can_drvdata = {
+	.id = BOSCH_C_CAN,
+	.msg_obj_num = 32,
+};
+
+static const struct c_can_driver_data d_can_drvdata = {
+	.id = BOSCH_D_CAN,
+	.msg_obj_num = 32,
+};
+
+static const struct raminit_bits dra7_raminit_bits[] = {
+	[0] = { .start = 3, .done = 1, },
+	[1] = { .start = 5, .done = 2, },
+};
+
+static const struct c_can_driver_data dra7_dcan_drvdata = {
+	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
+	.raminit_num = ARRAY_SIZE(dra7_raminit_bits),
+	.raminit_bits = dra7_raminit_bits,
+	.raminit_pulse = true,
+};
+
+static const struct raminit_bits am3352_raminit_bits[] = {
+	[0] = { .start = 0, .done = 8, },
+	[1] = { .start = 1, .done = 9, },
+};
+
+static const struct c_can_driver_data am3352_dcan_drvdata = {
+	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
+	.raminit_num = ARRAY_SIZE(am3352_raminit_bits),
+	.raminit_bits = am3352_raminit_bits,
+};
+
+static const struct platform_device_id c_can_id_table[] = {
+	{
+		.name = KBUILD_MODNAME,
+		.driver_data = (kernel_ulong_t)&c_can_drvdata,
+	},
+	{
+		.name = "c_can",
+		.driver_data = (kernel_ulong_t)&c_can_drvdata,
+	},
+	{
+		.name = "d_can",
+		.driver_data = (kernel_ulong_t)&d_can_drvdata,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, c_can_id_table);
+
+static const struct of_device_id c_can_of_table[] = {
+	{ .compatible = "bosch,c_can", .data = &c_can_drvdata },
+	{ .compatible = "bosch,d_can", .data = &d_can_drvdata },
+	{ .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata },
+	{ .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata },
+	{ .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, c_can_of_table);
+
+static int c_can_plat_probe(struct platform_device *pdev)
+{
+	int ret;
+	void __iomem *addr;
+	struct net_device *dev;
+	struct c_can_priv *priv;
+	const struct of_device_id *match;
+	struct resource *mem;
+	int irq;
+	struct clk *clk;
+	const struct c_can_driver_data *drvdata;
+	struct device_node *np = pdev->dev.of_node;
+
+	match = of_match_device(c_can_of_table, &pdev->dev);
+	if (match) {
+		drvdata = match->data;
+	} else if (pdev->id_entry->driver_data) {
+		drvdata = (struct c_can_driver_data *)
+			platform_get_device_id(pdev)->driver_data;
+	} else {
+		return -ENODEV;
+	}
+
+	/* get the appropriate clk */
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto exit;
+	}
+
+	/* get the platform data */
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(addr)) {
+		ret =  PTR_ERR(addr);
+		goto exit;
+	}
+
+	/* allocate the c_can device */
+	dev = alloc_c_can_dev(drvdata->msg_obj_num);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	priv = netdev_priv(dev);
+	switch (drvdata->id) {
+	case BOSCH_C_CAN:
+		priv->regs = reg_map_c_can;
+		switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
+		case IORESOURCE_MEM_32BIT:
+			priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
+			priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
+			priv->read_reg32 = c_can_plat_read_reg32;
+			priv->write_reg32 = c_can_plat_write_reg32;
+			break;
+		case IORESOURCE_MEM_16BIT:
+		default:
+			priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+			priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+			priv->read_reg32 = c_can_plat_read_reg32;
+			priv->write_reg32 = c_can_plat_write_reg32;
+			break;
+		}
+		break;
+	case BOSCH_D_CAN:
+		priv->regs = reg_map_d_can;
+		priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+		priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+		priv->read_reg32 = d_can_plat_read_reg32;
+		priv->write_reg32 = d_can_plat_write_reg32;
+
+		/* Check if we need custom RAMINIT via syscon. Mostly for TI
+		 * platforms. Only supported with DT boot.
+		 */
+		if (np && of_property_read_bool(np, "syscon-raminit")) {
+			u32 id;
+			struct c_can_raminit *raminit = &priv->raminit_sys;
+
+			ret = -EINVAL;
+			raminit->syscon = syscon_regmap_lookup_by_phandle(np,
+									  "syscon-raminit");
+			if (IS_ERR(raminit->syscon)) {
+				/* can fail with -EPROBE_DEFER */
+				ret = PTR_ERR(raminit->syscon);
+				free_c_can_dev(dev);
+				return ret;
+			}
+
+			if (of_property_read_u32_index(np, "syscon-raminit", 1,
+						       &raminit->reg)) {
+				dev_err(&pdev->dev,
+					"couldn't get the RAMINIT reg. offset!\n");
+				goto exit_free_device;
+			}
+
+			if (of_property_read_u32_index(np, "syscon-raminit", 2,
+						       &id)) {
+				dev_err(&pdev->dev,
+					"couldn't get the CAN instance ID\n");
+				goto exit_free_device;
+			}
+
+			if (id >= drvdata->raminit_num) {
+				dev_err(&pdev->dev,
+					"Invalid CAN instance ID\n");
+				goto exit_free_device;
+			}
+
+			raminit->bits = drvdata->raminit_bits[id];
+			raminit->needs_pulse = drvdata->raminit_pulse;
+
+			priv->raminit = c_can_hw_raminit_syscon;
+		} else {
+			priv->raminit = c_can_hw_raminit;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		goto exit_free_device;
+	}
+
+	dev->irq = irq;
+	priv->base = addr;
+	priv->device = &pdev->dev;
+	priv->can.clock.freq = clk_get_rate(clk);
+	priv->type = drvdata->id;
+
+	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	pm_runtime_enable(priv->device);
+	ret = register_c_can_dev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			KBUILD_MODNAME, ret);
+		goto exit_free_device;
+	}
+
+	dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+		 KBUILD_MODNAME, priv->base, dev->irq);
+	return 0;
+
+exit_free_device:
+	pm_runtime_disable(priv->device);
+	free_c_can_dev(dev);
+exit:
+	dev_err(&pdev->dev, "probe failed\n");
+
+	return ret;
+}
+
+static int c_can_plat_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	unregister_c_can_dev(dev);
+	pm_runtime_disable(priv->device);
+	free_c_can_dev(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int c_can_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(ndev);
+
+	if (priv->type != BOSCH_D_CAN) {
+		dev_warn(&pdev->dev, "Not supported\n");
+		return 0;
+	}
+
+	if (netif_running(ndev)) {
+		netif_stop_queue(ndev);
+		netif_device_detach(ndev);
+	}
+
+	ret = c_can_power_down(ndev);
+	if (ret) {
+		netdev_err(ndev, "failed to enter power down mode\n");
+		return ret;
+	}
+
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	return 0;
+}
+
+static int c_can_resume(struct platform_device *pdev)
+{
+	int ret;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(ndev);
+
+	if (priv->type != BOSCH_D_CAN) {
+		dev_warn(&pdev->dev, "Not supported\n");
+		return 0;
+	}
+
+	ret = c_can_power_up(ndev);
+	if (ret) {
+		netdev_err(ndev, "Still in power down mode\n");
+		return ret;
+	}
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(ndev)) {
+		netif_device_attach(ndev);
+		netif_start_queue(ndev);
+	}
+
+	return 0;
+}
+#else
+#define c_can_suspend NULL
+#define c_can_resume NULL
+#endif
+
+static struct platform_driver c_can_plat_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = c_can_of_table,
+	},
+	.probe = c_can_plat_probe,
+	.remove = c_can_plat_remove,
+	.suspend = c_can_suspend,
+	.resume = c_can_resume,
+	.id_table = c_can_id_table,
+};
+
+module_platform_driver(c_can_plat_driver);
+
+MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Platform CAN bus driver for Bosch C_CAN controller");