Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 700 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
new file mode 100644
index 000000000..8c50a128d
--- /dev/null
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2013 - 2019 Intel Corporation. */
+
+#include "fm10k.h"
+#include "fm10k_vf.h"
+#include "fm10k_pf.h"
+
+static s32 fm10k_iov_msg_error(struct fm10k_hw *hw, u32 **results,
+			       struct fm10k_mbx_info *mbx)
+{
+	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+	struct fm10k_intfc *interface = hw->back;
+	struct pci_dev *pdev = interface->pdev;
+
+	dev_err(&pdev->dev, "Unknown message ID %u on VF %d\n",
+		**results & FM10K_TLV_ID_MASK, vf_info->vf_idx);
+
+	return fm10k_tlv_msg_error(hw, results, mbx);
+}
+
+/**
+ *  fm10k_iov_msg_queue_mac_vlan - Message handler for MAC/VLAN request from VF
+ *  @hw: Pointer to hardware structure
+ *  @results: Pointer array to message, results[0] is pointer to message
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This function is a custom handler for MAC/VLAN requests from the VF. The
+ *  assumption is that it is acceptable to directly hand off the message from
+ *  the VF to the PF's switch manager. However, we use a MAC/VLAN message
+ *  queue to avoid overloading the mailbox when a large number of requests
+ *  come in.
+ **/
+static s32 fm10k_iov_msg_queue_mac_vlan(struct fm10k_hw *hw, u32 **results,
+					struct fm10k_mbx_info *mbx)
+{
+	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+	struct fm10k_intfc *interface = hw->back;
+	u8 mac[ETH_ALEN];
+	u32 *result;
+	int err = 0;
+	bool set;
+	u16 vlan;
+	u32 vid;
+
+	/* we shouldn't be updating rules on a disabled interface */
+	if (!FM10K_VF_FLAG_ENABLED(vf_info))
+		err = FM10K_ERR_PARAM;
+
+	if (!err && !!results[FM10K_MAC_VLAN_MSG_VLAN]) {
+		result = results[FM10K_MAC_VLAN_MSG_VLAN];
+
+		/* record VLAN id requested */
+		err = fm10k_tlv_attr_get_u32(result, &vid);
+		if (err)
+			return err;
+
+		set = !(vid & FM10K_VLAN_CLEAR);
+		vid &= ~FM10K_VLAN_CLEAR;
+
+		/* if the length field has been set, this is a multi-bit
+		 * update request. For multi-bit requests, simply disallow
+		 * them when the pf_vid has been set. In this case, the PF
+		 * should have already cleared the VLAN_TABLE, and if we
+		 * allowed them, it could allow a rogue VF to receive traffic
+		 * on a VLAN it was not assigned. In the single-bit case, we
+		 * need to modify requests for VLAN 0 to use the default PF or
+		 * SW vid when assigned.
+		 */
+
+		if (vid >> 16) {
+			/* prevent multi-bit requests when PF has
+			 * administratively set the VLAN for this VF
+			 */
+			if (vf_info->pf_vid)
+				return FM10K_ERR_PARAM;
+		} else {
+			err = fm10k_iov_select_vid(vf_info, (u16)vid);
+			if (err < 0)
+				return err;
+
+			vid = err;
+		}
+
+		/* update VSI info for VF in regards to VLAN table */
+		err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
+	}
+
+	if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
+		result = results[FM10K_MAC_VLAN_MSG_MAC];
+
+		/* record unicast MAC address requested */
+		err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
+		if (err)
+			return err;
+
+		/* block attempts to set MAC for a locked device */
+		if (is_valid_ether_addr(vf_info->mac) &&
+		    !ether_addr_equal(mac, vf_info->mac))
+			return FM10K_ERR_PARAM;
+
+		set = !(vlan & FM10K_VLAN_CLEAR);
+		vlan &= ~FM10K_VLAN_CLEAR;
+
+		err = fm10k_iov_select_vid(vf_info, vlan);
+		if (err < 0)
+			return err;
+
+		vlan = (u16)err;
+
+		/* Add this request to the MAC/VLAN queue */
+		err = fm10k_queue_mac_request(interface, vf_info->glort,
+					      mac, vlan, set);
+	}
+
+	if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
+		result = results[FM10K_MAC_VLAN_MSG_MULTICAST];
+
+		/* record multicast MAC address requested */
+		err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
+		if (err)
+			return err;
+
+		/* verify that the VF is allowed to request multicast */
+		if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
+			return FM10K_ERR_PARAM;
+
+		set = !(vlan & FM10K_VLAN_CLEAR);
+		vlan &= ~FM10K_VLAN_CLEAR;
+
+		err = fm10k_iov_select_vid(vf_info, vlan);
+		if (err < 0)
+			return err;
+
+		vlan = (u16)err;
+
+		/* Add this request to the MAC/VLAN queue */
+		err = fm10k_queue_mac_request(interface, vf_info->glort,
+					      mac, vlan, set);
+	}
+
+	return err;
+}
+
+static const struct fm10k_msg_data iov_mbx_data[] = {
+	FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
+	FM10K_VF_MSG_MSIX_HANDLER(fm10k_iov_msg_msix_pf),
+	FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_iov_msg_queue_mac_vlan),
+	FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_iov_msg_lport_state_pf),
+	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_iov_msg_error),
+};
+
+s32 fm10k_iov_event(struct fm10k_intfc *interface)
+{
+	struct fm10k_hw *hw = &interface->hw;
+	struct fm10k_iov_data *iov_data;
+	s64 vflre;
+	int i;
+
+	/* if there is no iov_data then there is no mailbox to process */
+	if (!READ_ONCE(interface->iov_data))
+		return 0;
+
+	rcu_read_lock();
+
+	iov_data = interface->iov_data;
+
+	/* check again now that we are in the RCU block */
+	if (!iov_data)
+		goto read_unlock;
+
+	if (!(fm10k_read_reg(hw, FM10K_EICR) & FM10K_EICR_VFLR))
+		goto read_unlock;
+
+	/* read VFLRE to determine if any VFs have been reset */
+	vflre = fm10k_read_reg(hw, FM10K_PFVFLRE(1));
+	vflre <<= 32;
+	vflre |= fm10k_read_reg(hw, FM10K_PFVFLRE(0));
+
+	i = iov_data->num_vfs;
+
+	for (vflre <<= 64 - i; vflre && i--; vflre += vflre) {
+		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
+
+		if (vflre >= 0)
+			continue;
+
+		hw->iov.ops.reset_resources(hw, vf_info);
+		vf_info->mbx.ops.connect(hw, &vf_info->mbx);
+	}
+
+read_unlock:
+	rcu_read_unlock();
+
+	return 0;
+}
+
+s32 fm10k_iov_mbx(struct fm10k_intfc *interface)
+{
+	struct fm10k_hw *hw = &interface->hw;
+	struct fm10k_iov_data *iov_data;
+	int i;
+
+	/* if there is no iov_data then there is no mailbox to process */
+	if (!READ_ONCE(interface->iov_data))
+		return 0;
+
+	rcu_read_lock();
+
+	iov_data = interface->iov_data;
+
+	/* check again now that we are in the RCU block */
+	if (!iov_data)
+		goto read_unlock;
+
+	/* lock the mailbox for transmit and receive */
+	fm10k_mbx_lock(interface);
+
+	/* Most VF messages sent to the PF cause the PF to respond by
+	 * requesting from the SM mailbox. This means that too many VF
+	 * messages processed at once could cause a mailbox timeout on the PF.
+	 * To prevent this, store a pointer to the next VF mbx to process. Use
+	 * that as the start of the loop so that we don't starve whichever VF
+	 * got ignored on the previous run.
+	 */
+process_mbx:
+	for (i = iov_data->next_vf_mbx ? : iov_data->num_vfs; i--;) {
+		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
+		struct fm10k_mbx_info *mbx = &vf_info->mbx;
+		u16 glort = vf_info->glort;
+
+		/* process the SM mailbox first to drain outgoing messages */
+		hw->mbx.ops.process(hw, &hw->mbx);
+
+		/* verify port mapping is valid, if not reset port */
+		if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort)) {
+			hw->iov.ops.reset_lport(hw, vf_info);
+			fm10k_clear_macvlan_queue(interface, glort, false);
+		}
+
+		/* reset VFs that have mailbox timed out */
+		if (!mbx->timeout) {
+			hw->iov.ops.reset_resources(hw, vf_info);
+			mbx->ops.connect(hw, mbx);
+		}
+
+		/* guarantee we have free space in the SM mailbox */
+		if (hw->mbx.state == FM10K_STATE_OPEN &&
+		    !hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU)) {
+			/* keep track of how many times this occurs */
+			interface->hw_sm_mbx_full++;
+
+			/* make sure we try again momentarily */
+			fm10k_service_event_schedule(interface);
+
+			break;
+		}
+
+		/* cleanup mailbox and process received messages */
+		mbx->ops.process(hw, mbx);
+	}
+
+	/* if we stopped processing mailboxes early, update next_vf_mbx.
+	 * Otherwise, reset next_vf_mbx, and restart loop so that we process
+	 * the remaining mailboxes we skipped at the start.
+	 */
+	if (i >= 0) {
+		iov_data->next_vf_mbx = i + 1;
+	} else if (iov_data->next_vf_mbx) {
+		iov_data->next_vf_mbx = 0;
+		goto process_mbx;
+	}
+
+	/* free the lock */
+	fm10k_mbx_unlock(interface);
+
+read_unlock:
+	rcu_read_unlock();
+
+	return 0;
+}
+
+void fm10k_iov_suspend(struct pci_dev *pdev)
+{
+	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+	int num_vfs, i;
+
+	/* pull out num_vfs from iov_data */
+	num_vfs = iov_data ? iov_data->num_vfs : 0;
+
+	/* shut down queue mapping for VFs */
+	fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_vf_rss),
+			FM10K_DGLORTMAP_NONE);
+
+	/* Stop any active VFs and reset their resources */
+	for (i = 0; i < num_vfs; i++) {
+		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
+
+		hw->iov.ops.reset_resources(hw, vf_info);
+		hw->iov.ops.reset_lport(hw, vf_info);
+		fm10k_clear_macvlan_queue(interface, vf_info->glort, false);
+	}
+}
+
+static void fm10k_mask_aer_comp_abort(struct pci_dev *pdev)
+{
+	u32 err_mask;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return;
+
+	/* Mask the completion abort bit in the ERR_UNCOR_MASK register,
+	 * preventing the device from reporting these errors to the upstream
+	 * PCIe root device. This avoids bringing down platforms which upgrade
+	 * non-fatal completer aborts into machine check exceptions. Completer
+	 * aborts can occur whenever a VF reads a queue it doesn't own.
+	 */
+	pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, &err_mask);
+	err_mask |= PCI_ERR_UNC_COMP_ABORT;
+	pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, err_mask);
+}
+
+int fm10k_iov_resume(struct pci_dev *pdev)
+{
+	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_dglort_cfg dglort = { 0 };
+	struct fm10k_hw *hw = &interface->hw;
+	int num_vfs, i;
+
+	/* pull out num_vfs from iov_data */
+	num_vfs = iov_data ? iov_data->num_vfs : 0;
+
+	/* return error if iov_data is not already populated */
+	if (!iov_data)
+		return -ENOMEM;
+
+	/* Lower severity of completer abort error reporting as
+	 * the VFs can trigger this any time they read a queue
+	 * that they don't own.
+	 */
+	fm10k_mask_aer_comp_abort(pdev);
+
+	/* allocate hardware resources for the VFs */
+	hw->iov.ops.assign_resources(hw, num_vfs, num_vfs);
+
+	/* configure DGLORT mapping for RSS */
+	dglort.glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE;
+	dglort.idx = fm10k_dglort_vf_rss;
+	dglort.inner_rss = 1;
+	dglort.rss_l = fls(fm10k_queues_per_pool(hw) - 1);
+	dglort.queue_b = fm10k_vf_queue_index(hw, 0);
+	dglort.vsi_l = fls(hw->iov.total_vfs - 1);
+	dglort.vsi_b = 1;
+
+	hw->mac.ops.configure_dglort_map(hw, &dglort);
+
+	/* assign resources to the device */
+	for (i = 0; i < num_vfs; i++) {
+		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
+
+		/* allocate all but the last GLORT to the VFs */
+		if (i == (~hw->mac.dglort_map >> FM10K_DGLORTMAP_MASK_SHIFT))
+			break;
+
+		/* assign GLORT to VF, and restrict it to multicast */
+		hw->iov.ops.set_lport(hw, vf_info, i,
+				      FM10K_VF_FLAG_MULTI_CAPABLE);
+
+		/* mailbox is disconnected so we don't send a message */
+		hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
+
+		/* now we are ready so we can connect */
+		vf_info->mbx.ops.connect(hw, &vf_info->mbx);
+	}
+
+	return 0;
+}
+
+s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid)
+{
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+	struct fm10k_vf_info *vf_info;
+	u16 vf_idx = (glort - hw->mac.dglort_map) & FM10K_DGLORTMAP_NONE;
+
+	/* no IOV support, not our message to process */
+	if (!iov_data)
+		return FM10K_ERR_PARAM;
+
+	/* glort outside our range, not our message to process */
+	if (vf_idx >= iov_data->num_vfs)
+		return FM10K_ERR_PARAM;
+
+	/* determine if an update has occurred and if so notify the VF */
+	vf_info = &iov_data->vf_info[vf_idx];
+	if (vf_info->sw_vid != pvid) {
+		vf_info->sw_vid = pvid;
+		hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
+	}
+
+	return 0;
+}
+
+static void fm10k_iov_free_data(struct pci_dev *pdev)
+{
+	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+
+	if (!interface->iov_data)
+		return;
+
+	/* reclaim hardware resources */
+	fm10k_iov_suspend(pdev);
+
+	/* drop iov_data from interface */
+	kfree_rcu(interface->iov_data, rcu);
+	interface->iov_data = NULL;
+}
+
+static s32 fm10k_iov_alloc_data(struct pci_dev *pdev, int num_vfs)
+{
+	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+	size_t size;
+	int i;
+
+	/* return error if iov_data is already populated */
+	if (iov_data)
+		return -EBUSY;
+
+	/* The PF should always be able to assign resources */
+	if (!hw->iov.ops.assign_resources)
+		return -ENODEV;
+
+	/* nothing to do if no VFs are requested */
+	if (!num_vfs)
+		return 0;
+
+	/* allocate memory for VF storage */
+	size = offsetof(struct fm10k_iov_data, vf_info[num_vfs]);
+	iov_data = kzalloc(size, GFP_KERNEL);
+	if (!iov_data)
+		return -ENOMEM;
+
+	/* record number of VFs */
+	iov_data->num_vfs = num_vfs;
+
+	/* loop through vf_info structures initializing each entry */
+	for (i = 0; i < num_vfs; i++) {
+		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
+		int err;
+
+		/* Record VF VSI value */
+		vf_info->vsi = i + 1;
+		vf_info->vf_idx = i;
+
+		/* initialize mailbox memory */
+		err = fm10k_pfvf_mbx_init(hw, &vf_info->mbx, iov_mbx_data, i);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Unable to initialize SR-IOV mailbox\n");
+			kfree(iov_data);
+			return err;
+		}
+	}
+
+	/* assign iov_data to interface */
+	interface->iov_data = iov_data;
+
+	/* allocate hardware resources for the VFs */
+	fm10k_iov_resume(pdev);
+
+	return 0;
+}
+
+void fm10k_iov_disable(struct pci_dev *pdev)
+{
+	if (pci_num_vf(pdev) && pci_vfs_assigned(pdev))
+		dev_err(&pdev->dev,
+			"Cannot disable SR-IOV while VFs are assigned\n");
+	else
+		pci_disable_sriov(pdev);
+
+	fm10k_iov_free_data(pdev);
+}
+
+int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
+{
+	int current_vfs = pci_num_vf(pdev);
+	int err = 0;
+
+	if (current_vfs && pci_vfs_assigned(pdev)) {
+		dev_err(&pdev->dev,
+			"Cannot modify SR-IOV while VFs are assigned\n");
+		num_vfs = current_vfs;
+	} else {
+		pci_disable_sriov(pdev);
+		fm10k_iov_free_data(pdev);
+	}
+
+	/* allocate resources for the VFs */
+	err = fm10k_iov_alloc_data(pdev, num_vfs);
+	if (err)
+		return err;
+
+	/* allocate VFs if not already allocated */
+	if (num_vfs && num_vfs != current_vfs) {
+		err = pci_enable_sriov(pdev, num_vfs);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Enable PCI SR-IOV failed: %d\n", err);
+			return err;
+		}
+	}
+
+	return num_vfs;
+}
+
+/**
+ * fm10k_iov_update_stats - Update stats for all VFs
+ * @interface: device private structure
+ *
+ * Updates the VF statistics for all enabled VFs. Expects to be called by
+ * fm10k_update_stats and assumes that locking via the __FM10K_UPDATING_STATS
+ * bit is already handled.
+ */
+void fm10k_iov_update_stats(struct fm10k_intfc *interface)
+{
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+	int i;
+
+	if (!iov_data)
+		return;
+
+	for (i = 0; i < iov_data->num_vfs; i++)
+		hw->iov.ops.update_stats(hw, iov_data->vf_info[i].stats, i);
+}
+
+static inline void fm10k_reset_vf_info(struct fm10k_intfc *interface,
+				       struct fm10k_vf_info *vf_info)
+{
+	struct fm10k_hw *hw = &interface->hw;
+
+	/* assigning the MAC address will send a mailbox message */
+	fm10k_mbx_lock(interface);
+
+	/* disable LPORT for this VF which clears switch rules */
+	hw->iov.ops.reset_lport(hw, vf_info);
+
+	fm10k_clear_macvlan_queue(interface, vf_info->glort, false);
+
+	/* assign new MAC+VLAN for this VF */
+	hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
+
+	/* re-enable the LPORT for this VF */
+	hw->iov.ops.set_lport(hw, vf_info, vf_info->vf_idx,
+			      FM10K_VF_FLAG_MULTI_CAPABLE);
+
+	fm10k_mbx_unlock(interface);
+}
+
+int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac)
+{
+	struct fm10k_intfc *interface = netdev_priv(netdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_vf_info *vf_info;
+
+	/* verify SR-IOV is active and that vf idx is valid */
+	if (!iov_data || vf_idx >= iov_data->num_vfs)
+		return -EINVAL;
+
+	/* verify MAC addr is valid */
+	if (!is_zero_ether_addr(mac) && !is_valid_ether_addr(mac))
+		return -EINVAL;
+
+	/* record new MAC address */
+	vf_info = &iov_data->vf_info[vf_idx];
+	ether_addr_copy(vf_info->mac, mac);
+
+	fm10k_reset_vf_info(interface, vf_info);
+
+	return 0;
+}
+
+int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid,
+			  u8 qos, __be16 vlan_proto)
+{
+	struct fm10k_intfc *interface = netdev_priv(netdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+	struct fm10k_vf_info *vf_info;
+
+	/* verify SR-IOV is active and that vf idx is valid */
+	if (!iov_data || vf_idx >= iov_data->num_vfs)
+		return -EINVAL;
+
+	/* QOS is unsupported and VLAN IDs accepted range 0-4094 */
+	if (qos || (vid > (VLAN_VID_MASK - 1)))
+		return -EINVAL;
+
+	/* VF VLAN Protocol part to default is unsupported */
+	if (vlan_proto != htons(ETH_P_8021Q))
+		return -EPROTONOSUPPORT;
+
+	vf_info = &iov_data->vf_info[vf_idx];
+
+	/* exit if there is nothing to do */
+	if (vf_info->pf_vid == vid)
+		return 0;
+
+	/* record default VLAN ID for VF */
+	vf_info->pf_vid = vid;
+
+	/* Clear the VLAN table for the VF */
+	hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, vf_info->vsi, false);
+
+	fm10k_reset_vf_info(interface, vf_info);
+
+	return 0;
+}
+
+int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx,
+			int __always_unused min_rate, int max_rate)
+{
+	struct fm10k_intfc *interface = netdev_priv(netdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+
+	/* verify SR-IOV is active and that vf idx is valid */
+	if (!iov_data || vf_idx >= iov_data->num_vfs)
+		return -EINVAL;
+
+	/* rate limit cannot be less than 10Mbs or greater than link speed */
+	if (max_rate &&
+	    (max_rate < FM10K_VF_TC_MIN || max_rate > FM10K_VF_TC_MAX))
+		return -EINVAL;
+
+	/* store values */
+	iov_data->vf_info[vf_idx].rate = max_rate;
+
+	/* update hardware configuration */
+	hw->iov.ops.configure_tc(hw, vf_idx, max_rate);
+
+	return 0;
+}
+
+int fm10k_ndo_get_vf_config(struct net_device *netdev,
+			    int vf_idx, struct ifla_vf_info *ivi)
+{
+	struct fm10k_intfc *interface = netdev_priv(netdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_vf_info *vf_info;
+
+	/* verify SR-IOV is active and that vf idx is valid */
+	if (!iov_data || vf_idx >= iov_data->num_vfs)
+		return -EINVAL;
+
+	vf_info = &iov_data->vf_info[vf_idx];
+
+	ivi->vf = vf_idx;
+	ivi->max_tx_rate = vf_info->rate;
+	ivi->min_tx_rate = 0;
+	ether_addr_copy(ivi->mac, vf_info->mac);
+	ivi->vlan = vf_info->pf_vid;
+	ivi->qos = 0;
+
+	return 0;
+}
+
+int fm10k_ndo_get_vf_stats(struct net_device *netdev,
+			   int vf_idx, struct ifla_vf_stats *stats)
+{
+	struct fm10k_intfc *interface = netdev_priv(netdev);
+	struct fm10k_iov_data *iov_data = interface->iov_data;
+	struct fm10k_hw *hw = &interface->hw;
+	struct fm10k_hw_stats_q *hw_stats;
+	u32 idx, qpp;
+
+	/* verify SR-IOV is active and that vf idx is valid */
+	if (!iov_data || vf_idx >= iov_data->num_vfs)
+		return -EINVAL;
+
+	qpp = fm10k_queues_per_pool(hw);
+	hw_stats = iov_data->vf_info[vf_idx].stats;
+
+	for (idx = 0; idx < qpp; idx++) {
+		stats->rx_packets += hw_stats[idx].rx_packets.count;
+		stats->tx_packets += hw_stats[idx].tx_packets.count;
+		stats->rx_bytes += hw_stats[idx].rx_bytes.count;
+		stats->tx_bytes += hw_stats[idx].tx_bytes.count;
+		stats->rx_dropped += hw_stats[idx].rx_drops.count;
+	}
+
+	return 0;
+}