Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1825 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
new file mode 100644
index 000000000..af1b0cde3
--- /dev/null
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -0,0 +1,1825 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2013 - 2019 Intel Corporation. */
+
+#include "fm10k_pf.h"
+#include "fm10k_vf.h"
+
+/**
+ *  fm10k_reset_hw_pf - PF hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  This function should return the hardware to a state similar to the
+ *  one it is in after being powered on.
+ **/
+static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
+{
+	s32 err;
+	u32 reg;
+	u16 i;
+
+	/* Disable interrupts */
+	fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_DISABLE(ALL));
+
+	/* Lock ITR2 reg 0 into itself and disable interrupt moderation */
+	fm10k_write_reg(hw, FM10K_ITR2(0), 0);
+	fm10k_write_reg(hw, FM10K_INT_CTRL, 0);
+
+	/* We assume here Tx and Rx queue 0 are owned by the PF */
+
+	/* Shut off VF access to their queues forcing them to queue 0 */
+	for (i = 0; i < FM10K_TQMAP_TABLE_SIZE; i++) {
+		fm10k_write_reg(hw, FM10K_TQMAP(i), 0);
+		fm10k_write_reg(hw, FM10K_RQMAP(i), 0);
+	}
+
+	/* shut down all rings */
+	err = fm10k_disable_queues_generic(hw, FM10K_MAX_QUEUES);
+	if (err == FM10K_ERR_REQUESTS_PENDING) {
+		hw->mac.reset_while_pending++;
+		goto force_reset;
+	} else if (err) {
+		return err;
+	}
+
+	/* Verify that DMA is no longer active */
+	reg = fm10k_read_reg(hw, FM10K_DMA_CTRL);
+	if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE))
+		return FM10K_ERR_DMA_PENDING;
+
+force_reset:
+	/* Inititate data path reset */
+	reg = FM10K_DMA_CTRL_DATAPATH_RESET;
+	fm10k_write_reg(hw, FM10K_DMA_CTRL, reg);
+
+	/* Flush write and allow 100us for reset to complete */
+	fm10k_write_flush(hw);
+	udelay(FM10K_RESET_TIMEOUT);
+
+	/* Verify we made it out of reset */
+	reg = fm10k_read_reg(hw, FM10K_IP);
+	if (!(reg & FM10K_IP_NOTINRESET))
+		return FM10K_ERR_RESET_FAILED;
+
+	return 0;
+}
+
+/**
+ *  fm10k_is_ari_hierarchy_pf - Indicate ARI hierarchy support
+ *  @hw: pointer to hardware structure
+ *
+ *  Looks at the ARI hierarchy bit to determine whether ARI is supported or not.
+ **/
+static bool fm10k_is_ari_hierarchy_pf(struct fm10k_hw *hw)
+{
+	u16 sriov_ctrl = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_SRIOV_CTRL);
+
+	return !!(sriov_ctrl & FM10K_PCIE_SRIOV_CTRL_VFARI);
+}
+
+/**
+ *  fm10k_init_hw_pf - PF hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static s32 fm10k_init_hw_pf(struct fm10k_hw *hw)
+{
+	u32 dma_ctrl, txqctl;
+	u16 i;
+
+	/* Establish default VSI as valid */
+	fm10k_write_reg(hw, FM10K_DGLORTDEC(fm10k_dglort_default), 0);
+	fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_default),
+			FM10K_DGLORTMAP_ANY);
+
+	/* Invalidate all other GLORT entries */
+	for (i = 1; i < FM10K_DGLORT_COUNT; i++)
+		fm10k_write_reg(hw, FM10K_DGLORTMAP(i), FM10K_DGLORTMAP_NONE);
+
+	/* reset ITR2(0) to point to itself */
+	fm10k_write_reg(hw, FM10K_ITR2(0), 0);
+
+	/* reset VF ITR2(0) to point to 0 avoid PF registers */
+	fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), 0);
+
+	/* loop through all PF ITR2 registers pointing them to the previous */
+	for (i = 1; i < FM10K_ITR_REG_COUNT_PF; i++)
+		fm10k_write_reg(hw, FM10K_ITR2(i), i - 1);
+
+	/* Enable interrupt moderator if not already enabled */
+	fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR);
+
+	/* compute the default txqctl configuration */
+	txqctl = FM10K_TXQCTL_PF | FM10K_TXQCTL_UNLIMITED_BW |
+		 (hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT);
+
+	for (i = 0; i < FM10K_MAX_QUEUES; i++) {
+		/* configure rings for 256 Queue / 32 Descriptor cache mode */
+		fm10k_write_reg(hw, FM10K_TQDLOC(i),
+				(i * FM10K_TQDLOC_BASE_32_DESC) |
+				FM10K_TQDLOC_SIZE_32_DESC);
+		fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl);
+
+		/* configure rings to provide TPH processing hints */
+		fm10k_write_reg(hw, FM10K_TPH_TXCTRL(i),
+				FM10K_TPH_TXCTRL_DESC_TPHEN |
+				FM10K_TPH_TXCTRL_DESC_RROEN |
+				FM10K_TPH_TXCTRL_DESC_WROEN |
+				FM10K_TPH_TXCTRL_DATA_RROEN);
+		fm10k_write_reg(hw, FM10K_TPH_RXCTRL(i),
+				FM10K_TPH_RXCTRL_DESC_TPHEN |
+				FM10K_TPH_RXCTRL_DESC_RROEN |
+				FM10K_TPH_RXCTRL_DATA_WROEN |
+				FM10K_TPH_RXCTRL_HDR_WROEN);
+	}
+
+	/* set max hold interval to align with 1.024 usec in all modes and
+	 * store ITR scale
+	 */
+	switch (hw->bus.speed) {
+	case fm10k_bus_speed_2500:
+		dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1;
+		hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN1;
+		break;
+	case fm10k_bus_speed_5000:
+		dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2;
+		hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN2;
+		break;
+	case fm10k_bus_speed_8000:
+		dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3;
+		hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3;
+		break;
+	default:
+		dma_ctrl = 0;
+		/* just in case, assume Gen3 ITR scale */
+		hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3;
+		break;
+	}
+
+	/* Configure TSO flags */
+	fm10k_write_reg(hw, FM10K_DTXTCPFLGL, FM10K_TSO_FLAGS_LOW);
+	fm10k_write_reg(hw, FM10K_DTXTCPFLGH, FM10K_TSO_FLAGS_HI);
+
+	/* Enable DMA engine
+	 * Set Rx Descriptor size to 32
+	 * Set Minimum MSS to 64
+	 * Set Maximum number of Rx queues to 256 / 32 Descriptor
+	 */
+	dma_ctrl |= FM10K_DMA_CTRL_TX_ENABLE | FM10K_DMA_CTRL_RX_ENABLE |
+		    FM10K_DMA_CTRL_RX_DESC_SIZE | FM10K_DMA_CTRL_MINMSS_64 |
+		    FM10K_DMA_CTRL_32_DESC;
+
+	fm10k_write_reg(hw, FM10K_DMA_CTRL, dma_ctrl);
+
+	/* record maximum queue count, we limit ourselves to 128 */
+	hw->mac.max_queues = FM10K_MAX_QUEUES_PF;
+
+	/* We support either 64 VFs or 7 VFs depending on if we have ARI */
+	hw->iov.total_vfs = fm10k_is_ari_hierarchy_pf(hw) ? 64 : 7;
+
+	return 0;
+}
+
+/**
+ *  fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vid: VLAN ID to add to table
+ *  @vsi: Index indicating VF ID or PF ID in table
+ *  @set: Indicates if this is a set or clear operation
+ *
+ *  This function adds or removes the corresponding VLAN ID from the VLAN
+ *  filter table for the corresponding function.  In addition to the
+ *  standard set/clear that supports one bit a multi-bit write is
+ *  supported to set 64 bits at a time.
+ **/
+static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
+{
+	u32 vlan_table, reg, mask, bit, len;
+
+	/* verify the VSI index is valid */
+	if (vsi > FM10K_VLAN_TABLE_VSI_MAX)
+		return FM10K_ERR_PARAM;
+
+	/* VLAN multi-bit write:
+	 * The multi-bit write has several parts to it.
+	 *               24              16               8               0
+	 *  7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+	 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	 * | RSVD0 |         Length        |C|RSVD0|        VLAN ID        |
+	 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	 *
+	 * VLAN ID: Vlan Starting value
+	 * RSVD0: Reserved section, must be 0
+	 * C: Flag field, 0 is set, 1 is clear (Used in VF VLAN message)
+	 * Length: Number of times to repeat the bit being set
+	 */
+	len = vid >> 16;
+	vid = (vid << 17) >> 17;
+
+	/* verify the reserved 0 fields are 0 */
+	if (len >= FM10K_VLAN_TABLE_VID_MAX || vid >= FM10K_VLAN_TABLE_VID_MAX)
+		return FM10K_ERR_PARAM;
+
+	/* Loop through the table updating all required VLANs */
+	for (reg = FM10K_VLAN_TABLE(vsi, vid / 32), bit = vid % 32;
+	     len < FM10K_VLAN_TABLE_VID_MAX;
+	     len -= 32 - bit, reg++, bit = 0) {
+		/* record the initial state of the register */
+		vlan_table = fm10k_read_reg(hw, reg);
+
+		/* truncate mask if we are at the start or end of the run */
+		mask = (~(u32)0 >> ((len < 31) ? 31 - len : 0)) << bit;
+
+		/* make necessary modifications to the register */
+		mask &= set ? ~vlan_table : vlan_table;
+		if (mask)
+			fm10k_write_reg(hw, reg, vlan_table ^ mask);
+	}
+
+	return 0;
+}
+
+/**
+ *  fm10k_read_mac_addr_pf - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the device MAC address from the SM_AREA and stores the value.
+ **/
+static s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw)
+{
+	u8 perm_addr[ETH_ALEN];
+	u32 serial_num;
+
+	serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(1));
+
+	/* last byte should be all 1's */
+	if ((~serial_num) << 24)
+		return  FM10K_ERR_INVALID_MAC_ADDR;
+
+	perm_addr[0] = (u8)(serial_num >> 24);
+	perm_addr[1] = (u8)(serial_num >> 16);
+	perm_addr[2] = (u8)(serial_num >> 8);
+
+	serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(0));
+
+	/* first byte should be all 1's */
+	if ((~serial_num) >> 24)
+		return  FM10K_ERR_INVALID_MAC_ADDR;
+
+	perm_addr[3] = (u8)(serial_num >> 16);
+	perm_addr[4] = (u8)(serial_num >> 8);
+	perm_addr[5] = (u8)(serial_num);
+
+	ether_addr_copy(hw->mac.perm_addr, perm_addr);
+	ether_addr_copy(hw->mac.addr, perm_addr);
+
+	return 0;
+}
+
+/**
+ *  fm10k_glort_valid_pf - Validate that the provided glort is valid
+ *  @hw: pointer to the HW structure
+ *  @glort: base glort to be validated
+ *
+ *  This function will return an error if the provided glort is invalid
+ **/
+bool fm10k_glort_valid_pf(struct fm10k_hw *hw, u16 glort)
+{
+	glort &= hw->mac.dglort_map >> FM10K_DGLORTMAP_MASK_SHIFT;
+
+	return glort == (hw->mac.dglort_map & FM10K_DGLORTMAP_NONE);
+}
+
+/**
+ *  fm10k_update_xc_addr_pf - Update device addresses
+ *  @hw: pointer to the HW structure
+ *  @glort: base resource tag for this request
+ *  @mac: MAC address to add/remove from table
+ *  @vid: VLAN ID to add/remove from table
+ *  @add: Indicates if this is an add or remove operation
+ *  @flags: flags field to indicate add and secure
+ *
+ *  This function generates a message to the Switch API requesting
+ *  that the given logical port add/remove the given L2 MAC/VLAN address.
+ **/
+static s32 fm10k_update_xc_addr_pf(struct fm10k_hw *hw, u16 glort,
+				   const u8 *mac, u16 vid, bool add, u8 flags)
+{
+	struct fm10k_mbx_info *mbx = &hw->mbx;
+	struct fm10k_mac_update mac_update;
+	u32 msg[5];
+
+	/* clear set bit from VLAN ID */
+	vid &= ~FM10K_VLAN_CLEAR;
+
+	/* if glort or VLAN are not valid return error */
+	if (!fm10k_glort_valid_pf(hw, glort) || vid >= FM10K_VLAN_TABLE_VID_MAX)
+		return FM10K_ERR_PARAM;
+
+	/* record fields */
+	mac_update.mac_lower = cpu_to_le32(((u32)mac[2] << 24) |
+						 ((u32)mac[3] << 16) |
+						 ((u32)mac[4] << 8) |
+						 ((u32)mac[5]));
+	mac_update.mac_upper = cpu_to_le16(((u16)mac[0] << 8) |
+					   ((u16)mac[1]));
+	mac_update.vlan = cpu_to_le16(vid);
+	mac_update.glort = cpu_to_le16(glort);
+	mac_update.action = add ? 0 : 1;
+	mac_update.flags = flags;
+
+	/* populate mac_update fields */
+	fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_UPDATE_MAC_FWD_RULE);
+	fm10k_tlv_attr_put_le_struct(msg, FM10K_PF_ATTR_ID_MAC_UPDATE,
+				     &mac_update, sizeof(mac_update));
+
+	/* load onto outgoing mailbox */
+	return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ *  fm10k_update_uc_addr_pf - Update device unicast addresses
+ *  @hw: pointer to the HW structure
+ *  @glort: base resource tag for this request
+ *  @mac: MAC address to add/remove from table
+ *  @vid: VLAN ID to add/remove from table
+ *  @add: Indicates if this is an add or remove operation
+ *  @flags: flags field to indicate add and secure
+ *
+ *  This function is used to add or remove unicast addresses for
+ *  the PF.
+ **/
+static s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort,
+				   const u8 *mac, u16 vid, bool add, u8 flags)
+{
+	/* verify MAC address is valid */
+	if (!is_valid_ether_addr(mac))
+		return FM10K_ERR_PARAM;
+
+	return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, flags);
+}
+
+/**
+ *  fm10k_update_mc_addr_pf - Update device multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @glort: base resource tag for this request
+ *  @mac: MAC address to add/remove from table
+ *  @vid: VLAN ID to add/remove from table
+ *  @add: Indicates if this is an add or remove operation
+ *
+ *  This function is used to add or remove multicast MAC addresses for
+ *  the PF.
+ **/
+static s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort,
+				   const u8 *mac, u16 vid, bool add)
+{
+	/* verify multicast address is valid */
+	if (!is_multicast_ether_addr(mac))
+		return FM10K_ERR_PARAM;
+
+	return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, 0);
+}
+
+/**
+ *  fm10k_update_xcast_mode_pf - Request update of multicast mode
+ *  @hw: pointer to hardware structure
+ *  @glort: base resource tag for this request
+ *  @mode: integer value indicating mode being requested
+ *
+ *  This function will attempt to request a higher mode for the port
+ *  so that it can enable either multicast, multicast promiscuous, or
+ *  promiscuous mode of operation.
+ **/
+static s32 fm10k_update_xcast_mode_pf(struct fm10k_hw *hw, u16 glort, u8 mode)
+{
+	struct fm10k_mbx_info *mbx = &hw->mbx;
+	u32 msg[3], xcast_mode;
+
+	if (mode > FM10K_XCAST_MODE_NONE)
+		return FM10K_ERR_PARAM;
+
+	/* if glort is not valid return error */
+	if (!fm10k_glort_valid_pf(hw, glort))
+		return FM10K_ERR_PARAM;
+
+	/* write xcast mode as a single u32 value,
+	 * lower 16 bits: glort
+	 * upper 16 bits: mode
+	 */
+	xcast_mode = ((u32)mode << 16) | glort;
+
+	/* generate message requesting to change xcast mode */
+	fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_XCAST_MODES);
+	fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_XCAST_MODE, xcast_mode);
+
+	/* load onto outgoing mailbox */
+	return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ *  fm10k_update_int_moderator_pf - Update interrupt moderator linked list
+ *  @hw: pointer to hardware structure
+ *
+ *  This function walks through the MSI-X vector table to determine the
+ *  number of active interrupts and based on that information updates the
+ *  interrupt moderator linked list.
+ **/
+static void fm10k_update_int_moderator_pf(struct fm10k_hw *hw)
+{
+	u32 i;
+
+	/* Disable interrupt moderator */
+	fm10k_write_reg(hw, FM10K_INT_CTRL, 0);
+
+	/* loop through PF from last to first looking enabled vectors */
+	for (i = FM10K_ITR_REG_COUNT_PF - 1; i; i--) {
+		if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i)))
+			break;
+	}
+
+	/* always reset VFITR2[0] to point to last enabled PF vector */
+	fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), i);
+
+	/* reset ITR2[0] to point to last enabled PF vector */
+	if (!hw->iov.num_vfs)
+		fm10k_write_reg(hw, FM10K_ITR2(0), i);
+
+	/* Enable interrupt moderator */
+	fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR);
+}
+
+/**
+ *  fm10k_update_lport_state_pf - Notify the switch of a change in port state
+ *  @hw: pointer to the HW structure
+ *  @glort: base resource tag for this request
+ *  @count: number of logical ports being updated
+ *  @enable: boolean value indicating enable or disable
+ *
+ *  This function is used to add/remove a logical port from the switch.
+ **/
+static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort,
+				       u16 count, bool enable)
+{
+	struct fm10k_mbx_info *mbx = &hw->mbx;
+	u32 msg[3], lport_msg;
+
+	/* do nothing if we are being asked to create or destroy 0 ports */
+	if (!count)
+		return 0;
+
+	/* if glort is not valid return error */
+	if (!fm10k_glort_valid_pf(hw, glort))
+		return FM10K_ERR_PARAM;
+
+	/* reset multicast mode if deleting lport */
+	if (!enable)
+		fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE);
+
+	/* construct the lport message from the 2 pieces of data we have */
+	lport_msg = ((u32)count << 16) | glort;
+
+	/* generate lport create/delete message */
+	fm10k_tlv_msg_init(msg, enable ? FM10K_PF_MSG_ID_LPORT_CREATE :
+					 FM10K_PF_MSG_ID_LPORT_DELETE);
+	fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_PORT, lport_msg);
+
+	/* load onto outgoing mailbox */
+	return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ *  fm10k_configure_dglort_map_pf - Configures GLORT entry and queues
+ *  @hw: pointer to hardware structure
+ *  @dglort: pointer to dglort configuration structure
+ *
+ *  Reads the configuration structure contained in dglort_cfg and uses
+ *  that information to then populate a DGLORTMAP/DEC entry and the queues
+ *  to which it has been assigned.
+ **/
+static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
+					 struct fm10k_dglort_cfg *dglort)
+{
+	u16 glort, queue_count, vsi_count, pc_count;
+	u16 vsi, queue, pc, q_idx;
+	u32 txqctl, dglortdec, dglortmap;
+
+	/* verify the dglort pointer */
+	if (!dglort)
+		return FM10K_ERR_PARAM;
+
+	/* verify the dglort values */
+	if ((dglort->idx > 7) || (dglort->rss_l > 7) || (dglort->pc_l > 3) ||
+	    (dglort->vsi_l > 6) || (dglort->vsi_b > 64) ||
+	    (dglort->queue_l > 8) || (dglort->queue_b >= 256))
+		return FM10K_ERR_PARAM;
+
+	/* determine count of VSIs and queues */
+	queue_count = BIT(dglort->rss_l + dglort->pc_l);
+	vsi_count = BIT(dglort->vsi_l + dglort->queue_l);
+	glort = dglort->glort;
+	q_idx = dglort->queue_b;
+
+	/* configure SGLORT for queues */
+	for (vsi = 0; vsi < vsi_count; vsi++, glort++) {
+		for (queue = 0; queue < queue_count; queue++, q_idx++) {
+			if (q_idx >= FM10K_MAX_QUEUES)
+				break;
+
+			fm10k_write_reg(hw, FM10K_TX_SGLORT(q_idx), glort);
+			fm10k_write_reg(hw, FM10K_RX_SGLORT(q_idx), glort);
+		}
+	}
+
+	/* determine count of PCs and queues */
+	queue_count = BIT(dglort->queue_l + dglort->rss_l + dglort->vsi_l);
+	pc_count = BIT(dglort->pc_l);
+
+	/* configure PC for Tx queues */
+	for (pc = 0; pc < pc_count; pc++) {
+		q_idx = pc + dglort->queue_b;
+		for (queue = 0; queue < queue_count; queue++) {
+			if (q_idx >= FM10K_MAX_QUEUES)
+				break;
+
+			txqctl = fm10k_read_reg(hw, FM10K_TXQCTL(q_idx));
+			txqctl &= ~FM10K_TXQCTL_PC_MASK;
+			txqctl |= pc << FM10K_TXQCTL_PC_SHIFT;
+			fm10k_write_reg(hw, FM10K_TXQCTL(q_idx), txqctl);
+
+			q_idx += pc_count;
+		}
+	}
+
+	/* configure DGLORTDEC */
+	dglortdec = ((u32)(dglort->rss_l) << FM10K_DGLORTDEC_RSSLENGTH_SHIFT) |
+		    ((u32)(dglort->queue_b) << FM10K_DGLORTDEC_QBASE_SHIFT) |
+		    ((u32)(dglort->pc_l) << FM10K_DGLORTDEC_PCLENGTH_SHIFT) |
+		    ((u32)(dglort->vsi_b) << FM10K_DGLORTDEC_VSIBASE_SHIFT) |
+		    ((u32)(dglort->vsi_l) << FM10K_DGLORTDEC_VSILENGTH_SHIFT) |
+		    ((u32)(dglort->queue_l));
+	if (dglort->inner_rss)
+		dglortdec |=  FM10K_DGLORTDEC_INNERRSS_ENABLE;
+
+	/* configure DGLORTMAP */
+	dglortmap = (dglort->idx == fm10k_dglort_default) ?
+			FM10K_DGLORTMAP_ANY : FM10K_DGLORTMAP_ZERO;
+	dglortmap <<= dglort->vsi_l + dglort->queue_l + dglort->shared_l;
+	dglortmap |= dglort->glort;
+
+	/* write values to hardware */
+	fm10k_write_reg(hw, FM10K_DGLORTDEC(dglort->idx), dglortdec);
+	fm10k_write_reg(hw, FM10K_DGLORTMAP(dglort->idx), dglortmap);
+
+	return 0;
+}
+
+u16 fm10k_queues_per_pool(struct fm10k_hw *hw)
+{
+	u16 num_pools = hw->iov.num_pools;
+
+	return (num_pools > 32) ? 2 : (num_pools > 16) ? 4 : (num_pools > 8) ?
+	       8 : FM10K_MAX_QUEUES_POOL;
+}
+
+u16 fm10k_vf_queue_index(struct fm10k_hw *hw, u16 vf_idx)
+{
+	u16 num_vfs = hw->iov.num_vfs;
+	u16 vf_q_idx = FM10K_MAX_QUEUES;
+
+	vf_q_idx -= fm10k_queues_per_pool(hw) * (num_vfs - vf_idx);
+
+	return vf_q_idx;
+}
+
+static u16 fm10k_vectors_per_pool(struct fm10k_hw *hw)
+{
+	u16 num_pools = hw->iov.num_pools;
+
+	return (num_pools > 32) ? 8 : (num_pools > 16) ? 16 :
+	       FM10K_MAX_VECTORS_POOL;
+}
+
+static u16 fm10k_vf_vector_index(struct fm10k_hw *hw, u16 vf_idx)
+{
+	u16 vf_v_idx = FM10K_MAX_VECTORS_PF;
+
+	vf_v_idx += fm10k_vectors_per_pool(hw) * vf_idx;
+
+	return vf_v_idx;
+}
+
+/**
+ *  fm10k_iov_assign_resources_pf - Assign pool resources for virtualization
+ *  @hw: pointer to the HW structure
+ *  @num_vfs: number of VFs to be allocated
+ *  @num_pools: number of virtualization pools to be allocated
+ *
+ *  Allocates queues and traffic classes to virtualization entities to prepare
+ *  the PF for SR-IOV and VMDq
+ **/
+static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs,
+					 u16 num_pools)
+{
+	u16 qmap_stride, qpp, vpp, vf_q_idx, vf_q_idx0, qmap_idx;
+	u32 vid = hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT;
+	int i, j;
+
+	/* hardware only supports up to 64 pools */
+	if (num_pools > 64)
+		return FM10K_ERR_PARAM;
+
+	/* the number of VFs cannot exceed the number of pools */
+	if ((num_vfs > num_pools) || (num_vfs > hw->iov.total_vfs))
+		return FM10K_ERR_PARAM;
+
+	/* record number of virtualization entities */
+	hw->iov.num_vfs = num_vfs;
+	hw->iov.num_pools = num_pools;
+
+	/* determine qmap offsets and counts */
+	qmap_stride = (num_vfs > 8) ? 32 : 256;
+	qpp = fm10k_queues_per_pool(hw);
+	vpp = fm10k_vectors_per_pool(hw);
+
+	/* calculate starting index for queues */
+	vf_q_idx = fm10k_vf_queue_index(hw, 0);
+	qmap_idx = 0;
+
+	/* establish TCs with -1 credits and no quanta to prevent transmit */
+	for (i = 0; i < num_vfs; i++) {
+		fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(i), 0);
+		fm10k_write_reg(hw, FM10K_TC_RATE(i), 0);
+		fm10k_write_reg(hw, FM10K_TC_CREDIT(i),
+				FM10K_TC_CREDIT_CREDIT_MASK);
+	}
+
+	/* zero out all mbmem registers */
+	for (i = FM10K_VFMBMEM_LEN * num_vfs; i--;)
+		fm10k_write_reg(hw, FM10K_MBMEM(i), 0);
+
+	/* clear event notification of VF FLR */
+	fm10k_write_reg(hw, FM10K_PFVFLREC(0), ~0);
+	fm10k_write_reg(hw, FM10K_PFVFLREC(1), ~0);
+
+	/* loop through unallocated rings assigning them back to PF */
+	for (i = FM10K_MAX_QUEUES_PF; i < vf_q_idx; i++) {
+		fm10k_write_reg(hw, FM10K_TXDCTL(i), 0);
+		fm10k_write_reg(hw, FM10K_TXQCTL(i), FM10K_TXQCTL_PF |
+				FM10K_TXQCTL_UNLIMITED_BW | vid);
+		fm10k_write_reg(hw, FM10K_RXQCTL(i), FM10K_RXQCTL_PF);
+	}
+
+	/* PF should have already updated VFITR2[0] */
+
+	/* update all ITR registers to flow to VFITR2[0] */
+	for (i = FM10K_ITR_REG_COUNT_PF + 1; i < FM10K_ITR_REG_COUNT; i++) {
+		if (!(i & (vpp - 1)))
+			fm10k_write_reg(hw, FM10K_ITR2(i), i - vpp);
+		else
+			fm10k_write_reg(hw, FM10K_ITR2(i), i - 1);
+	}
+
+	/* update PF ITR2[0] to reference the last vector */
+	fm10k_write_reg(hw, FM10K_ITR2(0),
+			fm10k_vf_vector_index(hw, num_vfs - 1));
+
+	/* loop through rings populating rings and TCs */
+	for (i = 0; i < num_vfs; i++) {
+		/* record index for VF queue 0 for use in end of loop */
+		vf_q_idx0 = vf_q_idx;
+
+		for (j = 0; j < qpp; j++, qmap_idx++, vf_q_idx++) {
+			/* assign VF and locked TC to queues */
+			fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
+			fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx),
+					(i << FM10K_TXQCTL_TC_SHIFT) | i |
+					FM10K_TXQCTL_VF | vid);
+			fm10k_write_reg(hw, FM10K_RXDCTL(vf_q_idx),
+					FM10K_RXDCTL_WRITE_BACK_MIN_DELAY |
+					FM10K_RXDCTL_DROP_ON_EMPTY);
+			fm10k_write_reg(hw, FM10K_RXQCTL(vf_q_idx),
+					(i << FM10K_RXQCTL_VF_SHIFT) |
+					FM10K_RXQCTL_VF);
+
+			/* map queue pair to VF */
+			fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
+			fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx);
+		}
+
+		/* repeat the first ring for all of the remaining VF rings */
+		for (; j < qmap_stride; j++, qmap_idx++) {
+			fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx0);
+			fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx0);
+		}
+	}
+
+	/* loop through remaining indexes assigning all to queue 0 */
+	while (qmap_idx < FM10K_TQMAP_TABLE_SIZE) {
+		fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
+		fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), 0);
+		qmap_idx++;
+	}
+
+	return 0;
+}
+
+/**
+ *  fm10k_iov_configure_tc_pf - Configure the shaping group for VF
+ *  @hw: pointer to the HW structure
+ *  @vf_idx: index of VF receiving GLORT
+ *  @rate: Rate indicated in Mb/s
+ *
+ *  Configured the TC for a given VF to allow only up to a given number
+ *  of Mb/s of outgoing Tx throughput.
+ **/
+static s32 fm10k_iov_configure_tc_pf(struct fm10k_hw *hw, u16 vf_idx, int rate)
+{
+	/* configure defaults */
+	u32 interval = FM10K_TC_RATE_INTERVAL_4US_GEN3;
+	u32 tc_rate = FM10K_TC_RATE_QUANTA_MASK;
+
+	/* verify vf is in range */
+	if (vf_idx >= hw->iov.num_vfs)
+		return FM10K_ERR_PARAM;
+
+	/* set interval to align with 4.096 usec in all modes */
+	switch (hw->bus.speed) {
+	case fm10k_bus_speed_2500:
+		interval = FM10K_TC_RATE_INTERVAL_4US_GEN1;
+		break;
+	case fm10k_bus_speed_5000:
+		interval = FM10K_TC_RATE_INTERVAL_4US_GEN2;
+		break;
+	default:
+		break;
+	}
+
+	if (rate) {
+		if (rate > FM10K_VF_TC_MAX || rate < FM10K_VF_TC_MIN)
+			return FM10K_ERR_PARAM;
+
+		/* The quanta is measured in Bytes per 4.096 or 8.192 usec
+		 * The rate is provided in Mbits per second
+		 * To tralslate from rate to quanta we need to multiply the
+		 * rate by 8.192 usec and divide by 8 bits/byte.  To avoid
+		 * dealing with floating point we can round the values up
+		 * to the nearest whole number ratio which gives us 128 / 125.
+		 */
+		tc_rate = (rate * 128) / 125;
+
+		/* try to keep the rate limiting accurate by increasing
+		 * the number of credits and interval for rates less than 4Gb/s
+		 */
+		if (rate < 4000)
+			interval <<= 1;
+		else
+			tc_rate >>= 1;
+	}
+
+	/* update rate limiter with new values */
+	fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), tc_rate | interval);
+	fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K);
+	fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K);
+
+	return 0;
+}
+
+/**
+ *  fm10k_iov_assign_int_moderator_pf - Add VF interrupts to moderator list
+ *  @hw: pointer to the HW structure
+ *  @vf_idx: index of VF receiving GLORT
+ *
+ *  Update the interrupt moderator linked list to include any MSI-X
+ *  interrupts which the VF has enabled in the MSI-X vector table.
+ **/
+static s32 fm10k_iov_assign_int_moderator_pf(struct fm10k_hw *hw, u16 vf_idx)
+{
+	u16 vf_v_idx, vf_v_limit, i;
+
+	/* verify vf is in range */
+	if (vf_idx >= hw->iov.num_vfs)
+		return FM10K_ERR_PARAM;
+
+	/* determine vector offset and count */
+	vf_v_idx = fm10k_vf_vector_index(hw, vf_idx);
+	vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw);
+
+	/* search for first vector that is not masked */
+	for (i = vf_v_limit - 1; i > vf_v_idx; i--) {
+		if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i)))
+			break;
+	}
+
+	/* reset linked list so it now includes our active vectors */
+	if (vf_idx == (hw->iov.num_vfs - 1))
+		fm10k_write_reg(hw, FM10K_ITR2(0), i);
+	else
+		fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), i);
+
+	return 0;
+}
+
+/**
+ *  fm10k_iov_assign_default_mac_vlan_pf - Assign a MAC and VLAN to VF
+ *  @hw: pointer to the HW structure
+ *  @vf_info: pointer to VF information structure
+ *
+ *  Assign a MAC address and default VLAN to a VF and notify it of the update
+ **/
+static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
+						struct fm10k_vf_info *vf_info)
+{
+	u16 qmap_stride, queues_per_pool, vf_q_idx, timeout, qmap_idx, i;
+	u32 msg[4], txdctl, txqctl, tdbal = 0, tdbah = 0;
+	s32 err = 0;
+	u16 vf_idx, vf_vid;
+
+	/* verify vf is in range */
+	if (!vf_info || vf_info->vf_idx >= hw->iov.num_vfs)
+		return FM10K_ERR_PARAM;
+
+	/* determine qmap offsets and counts */
+	qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256;
+	queues_per_pool = fm10k_queues_per_pool(hw);
+
+	/* calculate starting index for queues */
+	vf_idx = vf_info->vf_idx;
+	vf_q_idx = fm10k_vf_queue_index(hw, vf_idx);
+	qmap_idx = qmap_stride * vf_idx;
+
+	/* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is
+	 * used here to indicate to the VF that it will not have privilege to
+	 * write VLAN_TABLE. All policy is enforced on the PF but this allows
+	 * the VF to correctly report errors to userspace requests.
+	 */
+	if (vf_info->pf_vid)
+		vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE;
+	else
+		vf_vid = vf_info->sw_vid;
+
+	/* generate MAC_ADDR request */
+	fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
+	fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC,
+				    vf_info->mac, vf_vid);
+
+	/* Configure Queue control register with new VLAN ID. The TXQCTL
+	 * register is RO from the VF, so the PF must do this even in the
+	 * case of notifying the VF of a new VID via the mailbox.
+	 */
+	txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) &
+		 FM10K_TXQCTL_VID_MASK;
+	txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
+		  FM10K_TXQCTL_VF | vf_idx;
+
+	for (i = 0; i < queues_per_pool; i++)
+		fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl);
+
+	/* try loading a message onto outgoing mailbox first */
+	if (vf_info->mbx.ops.enqueue_tx) {
+		err = vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
+		if (err != FM10K_MBX_ERR_NO_MBX)
+			return err;
+		err = 0;
+	}
+
+	/* If we aren't connected to a mailbox, this is most likely because
+	 * the VF driver is not running. It should thus be safe to re-map
+	 * queues and use the registers to pass the MAC address so that the VF
+	 * driver gets correct information during its initialization.
+	 */
+
+	/* MAP Tx queue back to 0 temporarily, and disable it */
+	fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
+	fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
+
+	/* verify ring has disabled before modifying base address registers */
+	txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx));
+	for (timeout = 0; txdctl & FM10K_TXDCTL_ENABLE; timeout++) {
+		/* limit ourselves to a 1ms timeout */
+		if (timeout == 10) {
+			err = FM10K_ERR_DMA_PENDING;
+			goto err_out;
+		}
+
+		usleep_range(100, 200);
+		txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx));
+	}
+
+	/* Update base address registers to contain MAC address */
+	if (is_valid_ether_addr(vf_info->mac)) {
+		tdbal = (((u32)vf_info->mac[3]) << 24) |
+			(((u32)vf_info->mac[4]) << 16) |
+			(((u32)vf_info->mac[5]) << 8);
+
+		tdbah = (((u32)0xFF)	        << 24) |
+			(((u32)vf_info->mac[0]) << 16) |
+			(((u32)vf_info->mac[1]) << 8) |
+			((u32)vf_info->mac[2]);
+	}
+
+	/* Record the base address into queue 0 */
+	fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx), tdbal);
+	fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx), tdbah);
+
+	/* Provide the VF the ITR scale, using software-defined fields in TDLEN
+	 * to pass the information during VF initialization. See definition of
+	 * FM10K_TDLEN_ITR_SCALE_SHIFT for more details.
+	 */
+	fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx), hw->mac.itr_scale <<
+						   FM10K_TDLEN_ITR_SCALE_SHIFT);
+
+err_out:
+	/* restore the queue back to VF ownership */
+	fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
+	return err;
+}
+
+/**
+ *  fm10k_iov_reset_resources_pf - Reassign queues and interrupts to a VF
+ *  @hw: pointer to the HW structure
+ *  @vf_info: pointer to VF information structure
+ *
+ *  Reassign the interrupts and queues to a VF following an FLR
+ **/
+static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
+					struct fm10k_vf_info *vf_info)
+{
+	u16 qmap_stride, queues_per_pool, vf_q_idx, qmap_idx;
+	u32 tdbal = 0, tdbah = 0, txqctl, rxqctl;
+	u16 vf_v_idx, vf_v_limit, vf_vid;
+	u8 vf_idx = vf_info->vf_idx;
+	int i;
+
+	/* verify vf is in range */
+	if (vf_idx >= hw->iov.num_vfs)
+		return FM10K_ERR_PARAM;
+
+	/* clear event notification of VF FLR */
+	fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), BIT(vf_idx % 32));
+
+	/* force timeout and then disconnect the mailbox */
+	vf_info->mbx.timeout = 0;
+	if (vf_info->mbx.ops.disconnect)
+		vf_info->mbx.ops.disconnect(hw, &vf_info->mbx);
+
+	/* determine vector offset and count */
+	vf_v_idx = fm10k_vf_vector_index(hw, vf_idx);
+	vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw);
+
+	/* determine qmap offsets and counts */
+	qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256;
+	queues_per_pool = fm10k_queues_per_pool(hw);
+	qmap_idx = qmap_stride * vf_idx;
+
+	/* make all the queues inaccessible to the VF */
+	for (i = qmap_idx; i < (qmap_idx + qmap_stride); i++) {
+		fm10k_write_reg(hw, FM10K_TQMAP(i), 0);
+		fm10k_write_reg(hw, FM10K_RQMAP(i), 0);
+	}
+
+	/* calculate starting index for queues */
+	vf_q_idx = fm10k_vf_queue_index(hw, vf_idx);
+
+	/* determine correct default VLAN ID */
+	if (vf_info->pf_vid)
+		vf_vid = vf_info->pf_vid;
+	else
+		vf_vid = vf_info->sw_vid;
+
+	/* configure Queue control register */
+	txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) |
+		 (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
+		 FM10K_TXQCTL_VF | vf_idx;
+	rxqctl = (vf_idx << FM10K_RXQCTL_VF_SHIFT) | FM10K_RXQCTL_VF;
+
+	/* stop further DMA and reset queue ownership back to VF */
+	for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) {
+		fm10k_write_reg(hw, FM10K_TXDCTL(i), 0);
+		fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl);
+		fm10k_write_reg(hw, FM10K_RXDCTL(i),
+				FM10K_RXDCTL_WRITE_BACK_MIN_DELAY |
+				FM10K_RXDCTL_DROP_ON_EMPTY);
+		fm10k_write_reg(hw, FM10K_RXQCTL(i), rxqctl);
+	}
+
+	/* reset TC with -1 credits and no quanta to prevent transmit */
+	fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), 0);
+	fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), 0);
+	fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx),
+			FM10K_TC_CREDIT_CREDIT_MASK);
+
+	/* update our first entry in the table based on previous VF */
+	if (!vf_idx)
+		hw->mac.ops.update_int_moderator(hw);
+	else
+		hw->iov.ops.assign_int_moderator(hw, vf_idx - 1);
+
+	/* reset linked list so it now includes our active vectors */
+	if (vf_idx == (hw->iov.num_vfs - 1))
+		fm10k_write_reg(hw, FM10K_ITR2(0), vf_v_idx);
+	else
+		fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), vf_v_idx);
+
+	/* link remaining vectors so that next points to previous */
+	for (vf_v_idx++; vf_v_idx < vf_v_limit; vf_v_idx++)
+		fm10k_write_reg(hw, FM10K_ITR2(vf_v_idx), vf_v_idx - 1);
+
+	/* zero out MBMEM, VLAN_TABLE, RETA, RSSRK, and MRQC registers */
+	for (i = FM10K_VFMBMEM_LEN; i--;)
+		fm10k_write_reg(hw, FM10K_MBMEM_VF(vf_idx, i), 0);
+	for (i = FM10K_VLAN_TABLE_SIZE; i--;)
+		fm10k_write_reg(hw, FM10K_VLAN_TABLE(vf_info->vsi, i), 0);
+	for (i = FM10K_RETA_SIZE; i--;)
+		fm10k_write_reg(hw, FM10K_RETA(vf_info->vsi, i), 0);
+	for (i = FM10K_RSSRK_SIZE; i--;)
+		fm10k_write_reg(hw, FM10K_RSSRK(vf_info->vsi, i), 0);
+	fm10k_write_reg(hw, FM10K_MRQC(vf_info->vsi), 0);
+
+	/* Update base address registers to contain MAC address */
+	if (is_valid_ether_addr(vf_info->mac)) {
+		tdbal = (((u32)vf_info->mac[3]) << 24) |
+			(((u32)vf_info->mac[4]) << 16) |
+			(((u32)vf_info->mac[5]) << 8);
+		tdbah = (((u32)0xFF)	   << 24) |
+			(((u32)vf_info->mac[0]) << 16) |
+			(((u32)vf_info->mac[1]) << 8) |
+			((u32)vf_info->mac[2]);
+	}
+
+	/* map queue pairs back to VF from last to first */
+	for (i = queues_per_pool; i--;) {
+		fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx + i), tdbal);
+		fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx + i), tdbah);
+		/* See definition of FM10K_TDLEN_ITR_SCALE_SHIFT for an
+		 * explanation of how TDLEN is used.
+		 */
+		fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx + i),
+				hw->mac.itr_scale <<
+				FM10K_TDLEN_ITR_SCALE_SHIFT);
+		fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx + i);
+		fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i);
+	}
+
+	/* repeat the first ring for all the remaining VF rings */
+	for (i = queues_per_pool; i < qmap_stride; i++) {
+		fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx);
+		fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx);
+	}
+
+	return 0;
+}
+
+/**
+ *  fm10k_iov_set_lport_pf - Assign and enable a logical port for a given VF
+ *  @hw: pointer to hardware structure
+ *  @vf_info: pointer to VF information structure
+ *  @lport_idx: Logical port offset from the hardware glort
+ *  @flags: Set of capability flags to extend port beyond basic functionality
+ *
+ *  This function allows enabling a VF port by assigning it a GLORT and
+ *  setting the flags so that it can enable an Rx mode.
+ **/
+static s32 fm10k_iov_set_lport_pf(struct fm10k_hw *hw,
+				  struct fm10k_vf_info *vf_info,
+				  u16 lport_idx, u8 flags)
+{
+	u16 glort = (hw->mac.dglort_map + lport_idx) & FM10K_DGLORTMAP_NONE;
+
+	/* if glort is not valid return error */
+	if (!fm10k_glort_valid_pf(hw, glort))
+		return FM10K_ERR_PARAM;
+
+	vf_info->vf_flags = flags | FM10K_VF_FLAG_NONE_CAPABLE;
+	vf_info->glort = glort;
+
+	return 0;
+}
+
+/**
+ *  fm10k_iov_reset_lport_pf - Disable a logical port for a given VF
+ *  @hw: pointer to hardware structure
+ *  @vf_info: pointer to VF information structure
+ *
+ *  This function disables a VF port by stripping it of a GLORT and
+ *  setting the flags so that it cannot enable any Rx mode.
+ **/
+static void fm10k_iov_reset_lport_pf(struct fm10k_hw *hw,
+				     struct fm10k_vf_info *vf_info)
+{
+	u32 msg[1];
+
+	/* need to disable the port if it is already enabled */
+	if (FM10K_VF_FLAG_ENABLED(vf_info)) {
+		/* notify switch that this port has been disabled */
+		fm10k_update_lport_state_pf(hw, vf_info->glort, 1, false);
+
+		/* generate port state response to notify VF it is not ready */
+		fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
+		vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
+	}
+
+	/* clear flags and glort if it exists */
+	vf_info->vf_flags = 0;
+	vf_info->glort = 0;
+}
+
+/**
+ *  fm10k_iov_update_stats_pf - Updates hardware related statistics for VFs
+ *  @hw: pointer to hardware structure
+ *  @q: stats for all queues of a VF
+ *  @vf_idx: index of VF
+ *
+ *  This function collects queue stats for VFs.
+ **/
+static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw,
+				      struct fm10k_hw_stats_q *q,
+				      u16 vf_idx)
+{
+	u32 idx, qpp;
+
+	/* get stats for all of the queues */
+	qpp = fm10k_queues_per_pool(hw);
+	idx = fm10k_vf_queue_index(hw, vf_idx);
+	fm10k_update_hw_stats_q(hw, q, idx, qpp);
+}
+
+/**
+ *  fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF
+ *  @hw: Pointer to hardware structure
+ *  @results: Pointer array to message, results[0] is pointer to message
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This function is a default handler for MSI-X requests from the VF. The
+ *  assumption is that in this case it is acceptable to just directly
+ *  hand off the message from the VF to the underlying shared code.
+ **/
+s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 __always_unused **results,
+			  struct fm10k_mbx_info *mbx)
+{
+	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+	u8 vf_idx = vf_info->vf_idx;
+
+	return hw->iov.ops.assign_int_moderator(hw, vf_idx);
+}
+
+/**
+ * fm10k_iov_select_vid - Select correct default VLAN ID
+ * @vf_info: pointer to VF information structure
+ * @vid: VLAN ID to correct
+ *
+ * Will report an error if the VLAN ID is out of range. For VID = 0, it will
+ * return either the pf_vid or sw_vid depending on which one is set.
+ */
+s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid)
+{
+	if (!vid)
+		return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid;
+	else if (vf_info->pf_vid && vid != vf_info->pf_vid)
+		return FM10K_ERR_PARAM;
+	else
+		return vid;
+}
+
+/**
+ *  fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF
+ *  @hw: Pointer to hardware structure
+ *  @results: Pointer array to message, results[0] is pointer to message
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This function is a default handler for MAC/VLAN requests from the VF.
+ *  The assumption is that in this case it is acceptable to just directly
+ *  hand off the message from the VF to the underlying shared code.
+ **/
+s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
+			      struct fm10k_mbx_info *mbx)
+{
+	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+	u8 mac[ETH_ALEN];
+	u32 *result;
+	int err = 0;
+	bool set;
+	u16 vlan;
+	u32 vid;
+
+	/* we shouldn't be updating rules on a disabled interface */
+	if (!FM10K_VF_FLAG_ENABLED(vf_info))
+		err = FM10K_ERR_PARAM;
+
+	if (!err && !!results[FM10K_MAC_VLAN_MSG_VLAN]) {
+		result = results[FM10K_MAC_VLAN_MSG_VLAN];
+
+		/* record VLAN id requested */
+		err = fm10k_tlv_attr_get_u32(result, &vid);
+		if (err)
+			return err;
+
+		set = !(vid & FM10K_VLAN_CLEAR);
+		vid &= ~FM10K_VLAN_CLEAR;
+
+		/* if the length field has been set, this is a multi-bit
+		 * update request. For multi-bit requests, simply disallow
+		 * them when the pf_vid has been set. In this case, the PF
+		 * should have already cleared the VLAN_TABLE, and if we
+		 * allowed them, it could allow a rogue VF to receive traffic
+		 * on a VLAN it was not assigned. In the single-bit case, we
+		 * need to modify requests for VLAN 0 to use the default PF or
+		 * SW vid when assigned.
+		 */
+
+		if (vid >> 16) {
+			/* prevent multi-bit requests when PF has
+			 * administratively set the VLAN for this VF
+			 */
+			if (vf_info->pf_vid)
+				return FM10K_ERR_PARAM;
+		} else {
+			err = fm10k_iov_select_vid(vf_info, (u16)vid);
+			if (err < 0)
+				return err;
+
+			vid = err;
+		}
+
+		/* update VSI info for VF in regards to VLAN table */
+		err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
+	}
+
+	if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
+		result = results[FM10K_MAC_VLAN_MSG_MAC];
+
+		/* record unicast MAC address requested */
+		err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
+		if (err)
+			return err;
+
+		/* block attempts to set MAC for a locked device */
+		if (is_valid_ether_addr(vf_info->mac) &&
+		    !ether_addr_equal(mac, vf_info->mac))
+			return FM10K_ERR_PARAM;
+
+		set = !(vlan & FM10K_VLAN_CLEAR);
+		vlan &= ~FM10K_VLAN_CLEAR;
+
+		err = fm10k_iov_select_vid(vf_info, vlan);
+		if (err < 0)
+			return err;
+
+		vlan = (u16)err;
+
+		/* notify switch of request for new unicast address */
+		err = hw->mac.ops.update_uc_addr(hw, vf_info->glort,
+						 mac, vlan, set, 0);
+	}
+
+	if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
+		result = results[FM10K_MAC_VLAN_MSG_MULTICAST];
+
+		/* record multicast MAC address requested */
+		err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
+		if (err)
+			return err;
+
+		/* verify that the VF is allowed to request multicast */
+		if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
+			return FM10K_ERR_PARAM;
+
+		set = !(vlan & FM10K_VLAN_CLEAR);
+		vlan &= ~FM10K_VLAN_CLEAR;
+
+		err = fm10k_iov_select_vid(vf_info, vlan);
+		if (err < 0)
+			return err;
+
+		vlan = (u16)err;
+
+		/* notify switch of request for new multicast address */
+		err = hw->mac.ops.update_mc_addr(hw, vf_info->glort,
+						 mac, vlan, set);
+	}
+
+	return err;
+}
+
+/**
+ *  fm10k_iov_supported_xcast_mode_pf - Determine best match for xcast mode
+ *  @vf_info: VF info structure containing capability flags
+ *  @mode: Requested xcast mode
+ *
+ *  This function outputs the mode that most closely matches the requested
+ *  mode.  If not modes match it will request we disable the port
+ **/
+static u8 fm10k_iov_supported_xcast_mode_pf(struct fm10k_vf_info *vf_info,
+					    u8 mode)
+{
+	u8 vf_flags = vf_info->vf_flags;
+
+	/* match up mode to capabilities as best as possible */
+	switch (mode) {
+	case FM10K_XCAST_MODE_PROMISC:
+		if (vf_flags & FM10K_VF_FLAG_PROMISC_CAPABLE)
+			return FM10K_XCAST_MODE_PROMISC;
+		fallthrough;
+	case FM10K_XCAST_MODE_ALLMULTI:
+		if (vf_flags & FM10K_VF_FLAG_ALLMULTI_CAPABLE)
+			return FM10K_XCAST_MODE_ALLMULTI;
+		fallthrough;
+	case FM10K_XCAST_MODE_MULTI:
+		if (vf_flags & FM10K_VF_FLAG_MULTI_CAPABLE)
+			return FM10K_XCAST_MODE_MULTI;
+		fallthrough;
+	case FM10K_XCAST_MODE_NONE:
+		if (vf_flags & FM10K_VF_FLAG_NONE_CAPABLE)
+			return FM10K_XCAST_MODE_NONE;
+		fallthrough;
+	default:
+		break;
+	}
+
+	/* disable interface as it should not be able to request any */
+	return FM10K_XCAST_MODE_DISABLE;
+}
+
+/**
+ *  fm10k_iov_msg_lport_state_pf - Message handler for port state requests
+ *  @hw: Pointer to hardware structure
+ *  @results: Pointer array to message, results[0] is pointer to message
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This function is a default handler for port state requests.  The port
+ *  state requests for now are basic and consist of enabling or disabling
+ *  the port.
+ **/
+s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results,
+				 struct fm10k_mbx_info *mbx)
+{
+	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+	s32 err = 0;
+	u32 msg[2];
+	u8 mode = 0;
+
+	/* verify VF is allowed to enable even minimal mode */
+	if (!(vf_info->vf_flags & FM10K_VF_FLAG_NONE_CAPABLE))
+		return FM10K_ERR_PARAM;
+
+	if (!!results[FM10K_LPORT_STATE_MSG_XCAST_MODE]) {
+		u32 *result = results[FM10K_LPORT_STATE_MSG_XCAST_MODE];
+
+		/* XCAST mode update requested */
+		err = fm10k_tlv_attr_get_u8(result, &mode);
+		if (err)
+			return FM10K_ERR_PARAM;
+
+		/* prep for possible demotion depending on capabilities */
+		mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode);
+
+		/* if mode is not currently enabled, enable it */
+		if (!(FM10K_VF_FLAG_ENABLED(vf_info) & BIT(mode)))
+			fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode);
+
+		/* swap mode back to a bit flag */
+		mode = FM10K_VF_FLAG_SET_MODE(mode);
+	} else if (!results[FM10K_LPORT_STATE_MSG_DISABLE]) {
+		/* need to disable the port if it is already enabled */
+		if (FM10K_VF_FLAG_ENABLED(vf_info))
+			err = fm10k_update_lport_state_pf(hw, vf_info->glort,
+							  1, false);
+
+		/* we need to clear VF_FLAG_ENABLED flags in order to ensure
+		 * that we actually re-enable the LPORT state below. Note that
+		 * this has no impact if the VF is already disabled, as the
+		 * flags are already cleared.
+		 */
+		if (!err)
+			vf_info->vf_flags = FM10K_VF_FLAG_CAPABLE(vf_info);
+
+		/* when enabling the port we should reset the rate limiters */
+		hw->iov.ops.configure_tc(hw, vf_info->vf_idx, vf_info->rate);
+
+		/* set mode for minimal functionality */
+		mode = FM10K_VF_FLAG_SET_MODE_NONE;
+
+		/* generate port state response to notify VF it is ready */
+		fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
+		fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_READY);
+		mbx->ops.enqueue_tx(hw, mbx, msg);
+	}
+
+	/* if enable state toggled note the update */
+	if (!err && (!FM10K_VF_FLAG_ENABLED(vf_info) != !mode))
+		err = fm10k_update_lport_state_pf(hw, vf_info->glort, 1,
+						  !!mode);
+
+	/* if state change succeeded, then update our stored state */
+	mode |= FM10K_VF_FLAG_CAPABLE(vf_info);
+	if (!err)
+		vf_info->vf_flags = mode;
+
+	return err;
+}
+
+/**
+ *  fm10k_update_hw_stats_pf - Updates hardware related statistics of PF
+ *  @hw: pointer to hardware structure
+ *  @stats: pointer to the stats structure to update
+ *
+ *  This function collects and aggregates global and per queue hardware
+ *  statistics.
+ **/
+static void fm10k_update_hw_stats_pf(struct fm10k_hw *hw,
+				     struct fm10k_hw_stats *stats)
+{
+	u32 timeout, ur, ca, um, xec, vlan_drop, loopback_drop, nodesc_drop;
+	u32 id, id_prev;
+
+	/* Use Tx queue 0 as a canary to detect a reset */
+	id = fm10k_read_reg(hw, FM10K_TXQCTL(0));
+
+	/* Read Global Statistics */
+	do {
+		timeout = fm10k_read_hw_stats_32b(hw, FM10K_STATS_TIMEOUT,
+						  &stats->timeout);
+		ur = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UR, &stats->ur);
+		ca = fm10k_read_hw_stats_32b(hw, FM10K_STATS_CA, &stats->ca);
+		um = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UM, &stats->um);
+		xec = fm10k_read_hw_stats_32b(hw, FM10K_STATS_XEC, &stats->xec);
+		vlan_drop = fm10k_read_hw_stats_32b(hw, FM10K_STATS_VLAN_DROP,
+						    &stats->vlan_drop);
+		loopback_drop =
+			fm10k_read_hw_stats_32b(hw,
+						FM10K_STATS_LOOPBACK_DROP,
+						&stats->loopback_drop);
+		nodesc_drop = fm10k_read_hw_stats_32b(hw,
+						      FM10K_STATS_NODESC_DROP,
+						      &stats->nodesc_drop);
+
+		/* if value has not changed then we have consistent data */
+		id_prev = id;
+		id = fm10k_read_reg(hw, FM10K_TXQCTL(0));
+	} while ((id ^ id_prev) & FM10K_TXQCTL_ID_MASK);
+
+	/* drop non-ID bits and set VALID ID bit */
+	id &= FM10K_TXQCTL_ID_MASK;
+	id |= FM10K_STAT_VALID;
+
+	/* Update Global Statistics */
+	if (stats->stats_idx == id) {
+		stats->timeout.count += timeout;
+		stats->ur.count += ur;
+		stats->ca.count += ca;
+		stats->um.count += um;
+		stats->xec.count += xec;
+		stats->vlan_drop.count += vlan_drop;
+		stats->loopback_drop.count += loopback_drop;
+		stats->nodesc_drop.count += nodesc_drop;
+	}
+
+	/* Update bases and record current PF id */
+	fm10k_update_hw_base_32b(&stats->timeout, timeout);
+	fm10k_update_hw_base_32b(&stats->ur, ur);
+	fm10k_update_hw_base_32b(&stats->ca, ca);
+	fm10k_update_hw_base_32b(&stats->um, um);
+	fm10k_update_hw_base_32b(&stats->xec, xec);
+	fm10k_update_hw_base_32b(&stats->vlan_drop, vlan_drop);
+	fm10k_update_hw_base_32b(&stats->loopback_drop, loopback_drop);
+	fm10k_update_hw_base_32b(&stats->nodesc_drop, nodesc_drop);
+	stats->stats_idx = id;
+
+	/* Update Queue Statistics */
+	fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues);
+}
+
+/**
+ *  fm10k_rebind_hw_stats_pf - Resets base for hardware statistics of PF
+ *  @hw: pointer to hardware structure
+ *  @stats: pointer to the stats structure to update
+ *
+ *  This function resets the base for global and per queue hardware
+ *  statistics.
+ **/
+static void fm10k_rebind_hw_stats_pf(struct fm10k_hw *hw,
+				     struct fm10k_hw_stats *stats)
+{
+	/* Unbind Global Statistics */
+	fm10k_unbind_hw_stats_32b(&stats->timeout);
+	fm10k_unbind_hw_stats_32b(&stats->ur);
+	fm10k_unbind_hw_stats_32b(&stats->ca);
+	fm10k_unbind_hw_stats_32b(&stats->um);
+	fm10k_unbind_hw_stats_32b(&stats->xec);
+	fm10k_unbind_hw_stats_32b(&stats->vlan_drop);
+	fm10k_unbind_hw_stats_32b(&stats->loopback_drop);
+	fm10k_unbind_hw_stats_32b(&stats->nodesc_drop);
+
+	/* Unbind Queue Statistics */
+	fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues);
+
+	/* Reinitialize bases for all stats */
+	fm10k_update_hw_stats_pf(hw, stats);
+}
+
+/**
+ *  fm10k_set_dma_mask_pf - Configures PhyAddrSpace to limit DMA to system
+ *  @hw: pointer to hardware structure
+ *  @dma_mask: 64 bit DMA mask required for platform
+ *
+ *  This function sets the PHYADDR.PhyAddrSpace bits for the endpoint in order
+ *  to limit the access to memory beyond what is physically in the system.
+ **/
+static void fm10k_set_dma_mask_pf(struct fm10k_hw *hw, u64 dma_mask)
+{
+	/* we need to write the upper 32 bits of DMA mask to PhyAddrSpace */
+	u32 phyaddr = (u32)(dma_mask >> 32);
+
+	fm10k_write_reg(hw, FM10K_PHYADDR, phyaddr);
+}
+
+/**
+ *  fm10k_get_fault_pf - Record a fault in one of the interface units
+ *  @hw: pointer to hardware structure
+ *  @type: pointer to fault type register offset
+ *  @fault: pointer to memory location to record the fault
+ *
+ *  Record the fault register contents to the fault data structure and
+ *  clear the entry from the register.
+ *
+ *  Returns ERR_PARAM if invalid register is specified or no error is present.
+ **/
+static s32 fm10k_get_fault_pf(struct fm10k_hw *hw, int type,
+			      struct fm10k_fault *fault)
+{
+	u32 func;
+
+	/* verify the fault register is in range and is aligned */
+	switch (type) {
+	case FM10K_PCA_FAULT:
+	case FM10K_THI_FAULT:
+	case FM10K_FUM_FAULT:
+		break;
+	default:
+		return FM10K_ERR_PARAM;
+	}
+
+	/* only service faults that are valid */
+	func = fm10k_read_reg(hw, type + FM10K_FAULT_FUNC);
+	if (!(func & FM10K_FAULT_FUNC_VALID))
+		return FM10K_ERR_PARAM;
+
+	/* read remaining fields */
+	fault->address = fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_HI);
+	fault->address <<= 32;
+	fault->address |= fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_LO);
+	fault->specinfo = fm10k_read_reg(hw, type + FM10K_FAULT_SPECINFO);
+
+	/* clear valid bit to allow for next error */
+	fm10k_write_reg(hw, type + FM10K_FAULT_FUNC, FM10K_FAULT_FUNC_VALID);
+
+	/* Record which function triggered the error */
+	if (func & FM10K_FAULT_FUNC_PF)
+		fault->func = 0;
+	else
+		fault->func = 1 + ((func & FM10K_FAULT_FUNC_VF_MASK) >>
+				   FM10K_FAULT_FUNC_VF_SHIFT);
+
+	/* record fault type */
+	fault->type = func & FM10K_FAULT_FUNC_TYPE_MASK;
+
+	return 0;
+}
+
+/**
+ *  fm10k_request_lport_map_pf - Request LPORT map from the switch API
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw)
+{
+	struct fm10k_mbx_info *mbx = &hw->mbx;
+	u32 msg[1];
+
+	/* issue request asking for LPORT map */
+	fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_LPORT_MAP);
+
+	/* load onto outgoing mailbox */
+	return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ *  fm10k_get_host_state_pf - Returns the state of the switch and mailbox
+ *  @hw: pointer to hardware structure
+ *  @switch_ready: pointer to boolean value that will record switch state
+ *
+ *  This function will check the DMA_CTRL2 register and mailbox in order
+ *  to determine if the switch is ready for the PF to begin requesting
+ *  addresses and mapping traffic to the local interface.
+ **/
+static s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready)
+{
+	u32 dma_ctrl2;
+
+	/* verify the switch is ready for interaction */
+	dma_ctrl2 = fm10k_read_reg(hw, FM10K_DMA_CTRL2);
+	if (!(dma_ctrl2 & FM10K_DMA_CTRL2_SWITCH_READY))
+		return 0;
+
+	/* retrieve generic host state info */
+	return fm10k_get_host_state_generic(hw, switch_ready);
+}
+
+/* This structure defines the attibutes to be parsed below */
+const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = {
+	FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+				 sizeof(struct fm10k_swapi_error)),
+	FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP),
+	FM10K_TLV_ATTR_LAST
+};
+
+/**
+ *  fm10k_msg_lport_map_pf - Message handler for lport_map message from SM
+ *  @hw: Pointer to hardware structure
+ *  @results: pointer array containing parsed data
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This handler configures the lport mapping based on the reply from the
+ *  switch API.
+ **/
+s32 fm10k_msg_lport_map_pf(struct fm10k_hw *hw, u32 **results,
+			   struct fm10k_mbx_info __always_unused *mbx)
+{
+	u16 glort, mask;
+	u32 dglort_map;
+	s32 err;
+
+	err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_LPORT_MAP],
+				     &dglort_map);
+	if (err)
+		return err;
+
+	/* extract values out of the header */
+	glort = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_GLORT);
+	mask = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_MASK);
+
+	/* verify mask is set and none of the masked bits in glort are set */
+	if (!mask || (glort & ~mask))
+		return FM10K_ERR_PARAM;
+
+	/* verify the mask is contiguous, and that it is 1's followed by 0's */
+	if (((~(mask - 1) & mask) + mask) & FM10K_DGLORTMAP_NONE)
+		return FM10K_ERR_PARAM;
+
+	/* record the glort, mask, and port count */
+	hw->mac.dglort_map = dglort_map;
+
+	return 0;
+}
+
+const struct fm10k_tlv_attr fm10k_update_pvid_msg_attr[] = {
+	FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_UPDATE_PVID),
+	FM10K_TLV_ATTR_LAST
+};
+
+/**
+ *  fm10k_msg_update_pvid_pf - Message handler for port VLAN message from SM
+ *  @hw: Pointer to hardware structure
+ *  @results: pointer array containing parsed data
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This handler configures the default VLAN for the PF
+ **/
+static s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *hw, u32 **results,
+				    struct fm10k_mbx_info __always_unused *mbx)
+{
+	u16 glort, pvid;
+	u32 pvid_update;
+	s32 err;
+
+	err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID],
+				     &pvid_update);
+	if (err)
+		return err;
+
+	/* extract values from the pvid update */
+	glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT);
+	pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID);
+
+	/* if glort is not valid return error */
+	if (!fm10k_glort_valid_pf(hw, glort))
+		return FM10K_ERR_PARAM;
+
+	/* verify VLAN ID is valid */
+	if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
+		return FM10K_ERR_PARAM;
+
+	/* record the port VLAN ID value */
+	hw->mac.default_vid = pvid;
+
+	return 0;
+}
+
+/**
+ *  fm10k_record_global_table_data - Move global table data to swapi table info
+ *  @from: pointer to source table data structure
+ *  @to: pointer to destination table info structure
+ *
+ *  This function is will copy table_data to the table_info contained in
+ *  the hw struct.
+ **/
+static void fm10k_record_global_table_data(struct fm10k_global_table_data *from,
+					   struct fm10k_swapi_table_info *to)
+{
+	/* convert from le32 struct to CPU byte ordered values */
+	to->used = le32_to_cpu(from->used);
+	to->avail = le32_to_cpu(from->avail);
+}
+
+const struct fm10k_tlv_attr fm10k_err_msg_attr[] = {
+	FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+				 sizeof(struct fm10k_swapi_error)),
+	FM10K_TLV_ATTR_LAST
+};
+
+/**
+ *  fm10k_msg_err_pf - Message handler for error reply
+ *  @hw: Pointer to hardware structure
+ *  @results: pointer array containing parsed data
+ *  @mbx: Pointer to mailbox information structure
+ *
+ *  This handler will capture the data for any error replies to previous
+ *  messages that the PF has sent.
+ **/
+s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results,
+		     struct fm10k_mbx_info __always_unused *mbx)
+{
+	struct fm10k_swapi_error err_msg;
+	s32 err;
+
+	/* extract structure from message */
+	err = fm10k_tlv_attr_get_le_struct(results[FM10K_PF_ATTR_ID_ERR],
+					   &err_msg, sizeof(err_msg));
+	if (err)
+		return err;
+
+	/* record table status */
+	fm10k_record_global_table_data(&err_msg.mac, &hw->swapi.mac);
+	fm10k_record_global_table_data(&err_msg.nexthop, &hw->swapi.nexthop);
+	fm10k_record_global_table_data(&err_msg.ffu, &hw->swapi.ffu);
+
+	/* record SW API status value */
+	hw->swapi.status = le32_to_cpu(err_msg.status);
+
+	return 0;
+}
+
+static const struct fm10k_msg_data fm10k_msg_data_pf[] = {
+	FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
+	FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
+	FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_msg_lport_map_pf),
+	FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
+	FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
+	FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_msg_update_pvid_pf),
+	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
+};
+
+static const struct fm10k_mac_ops mac_ops_pf = {
+	.get_bus_info		= fm10k_get_bus_info_generic,
+	.reset_hw		= fm10k_reset_hw_pf,
+	.init_hw		= fm10k_init_hw_pf,
+	.start_hw		= fm10k_start_hw_generic,
+	.stop_hw		= fm10k_stop_hw_generic,
+	.update_vlan		= fm10k_update_vlan_pf,
+	.read_mac_addr		= fm10k_read_mac_addr_pf,
+	.update_uc_addr		= fm10k_update_uc_addr_pf,
+	.update_mc_addr		= fm10k_update_mc_addr_pf,
+	.update_xcast_mode	= fm10k_update_xcast_mode_pf,
+	.update_int_moderator	= fm10k_update_int_moderator_pf,
+	.update_lport_state	= fm10k_update_lport_state_pf,
+	.update_hw_stats	= fm10k_update_hw_stats_pf,
+	.rebind_hw_stats	= fm10k_rebind_hw_stats_pf,
+	.configure_dglort_map	= fm10k_configure_dglort_map_pf,
+	.set_dma_mask		= fm10k_set_dma_mask_pf,
+	.get_fault		= fm10k_get_fault_pf,
+	.get_host_state		= fm10k_get_host_state_pf,
+	.request_lport_map	= fm10k_request_lport_map_pf,
+};
+
+static const struct fm10k_iov_ops iov_ops_pf = {
+	.assign_resources		= fm10k_iov_assign_resources_pf,
+	.configure_tc			= fm10k_iov_configure_tc_pf,
+	.assign_int_moderator		= fm10k_iov_assign_int_moderator_pf,
+	.assign_default_mac_vlan	= fm10k_iov_assign_default_mac_vlan_pf,
+	.reset_resources		= fm10k_iov_reset_resources_pf,
+	.set_lport			= fm10k_iov_set_lport_pf,
+	.reset_lport			= fm10k_iov_reset_lport_pf,
+	.update_stats			= fm10k_iov_update_stats_pf,
+};
+
+static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw)
+{
+	fm10k_get_invariants_generic(hw);
+
+	return fm10k_sm_mbx_init(hw, &hw->mbx, fm10k_msg_data_pf);
+}
+
+const struct fm10k_info fm10k_pf_info = {
+	.mac		= fm10k_mac_pf,
+	.get_invariants	= fm10k_get_invariants_pf,
+	.mac_ops	= &mac_ops_pf,
+	.iov_ops	= &iov_ops_pf,
+};