summaryrefslogtreecommitdiffstats
path: root/drivers/net/hippi
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/net/hippi
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/hippi')
-rw-r--r--drivers/net/hippi/Kconfig40
-rw-r--r--drivers/net/hippi/Makefile6
-rw-r--r--drivers/net/hippi/rrunner.c1687
-rw-r--r--drivers/net/hippi/rrunner.h848
4 files changed, 2581 insertions, 0 deletions
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
new file mode 100644
index 000000000..46b911bb8
--- /dev/null
+++ b/drivers/net/hippi/Kconfig
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# HIPPI network device configuration
+#
+
+config HIPPI
+ bool "HIPPI driver support"
+ depends on INET && PCI
+ help
+ HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+ 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+ can run over copper (25m) or fiber (300m on multi-mode or 10km on
+ single-mode). HIPPI networks are commonly used for clusters and to
+ connect to super computers. If you are connected to a HIPPI network
+ and have a HIPPI network card in your computer that you want to use
+ under Linux, say Y here (you must also remember to enable the driver
+ for your HIPPI card below). Most people will say N here.
+
+if HIPPI
+
+config ROADRUNNER
+ tristate "Essential RoadRunner HIPPI PCI adapter support"
+ depends on PCI
+ help
+ Say Y here if this is your PCI HIPPI network card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called rrunner. If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+ bool "Use large TX/RX rings"
+ depends on ROADRUNNER
+ help
+ If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+ of additional memory to allow for fastest operation, both for
+ transmitting and receiving. This memory cannot be used by any other
+ kernel code or by user space programs. Say Y here only if you have
+ the memory.
+
+endif # HIPPI
diff --git a/drivers/net/hippi/Makefile b/drivers/net/hippi/Makefile
new file mode 100644
index 000000000..409dd47f3
--- /dev/null
+++ b/drivers/net/hippi/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the HIPPI network device drivers.
+#
+
+obj-$(CONFIG_ROADRUNNER) += rrunner.o
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
new file mode 100644
index 000000000..aa8f828a0
--- /dev/null
+++ b/drivers/net/hippi/rrunner.c
@@ -0,0 +1,1687 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * rrunner.c: Linux driver for the Essential RoadRunner HIPPI board.
+ *
+ * Copyright (C) 1998-2002 by Jes Sorensen, <jes@wildopensource.com>.
+ *
+ * Thanks to Essential Communication for providing us with hardware
+ * and very comprehensive documentation without which I would not have
+ * been able to write this driver. A special thank you to John Gibbon
+ * for sorting out the legal issues, with the NDA, allowing the code to
+ * be released under the GPL.
+ *
+ * Thanks to Jayaram Bhat from ODS/Essential for fixing some of the
+ * stupid bugs in my code.
+ *
+ * Softnet support and various other patches from Val Henson of
+ * ODS/Essential.
+ *
+ * PCI DMA mapping code partly based on work by Francois Romieu.
+ */
+
+
+#define DEBUG 1
+#define RX_DMA_SKBUFF 1
+#define PKT_COPY_THRESHOLD 512
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/hippidevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <net/sock.h>
+
+#include <asm/cache.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+#define rr_if_busy(dev) netif_queue_stopped(dev)
+#define rr_if_running(dev) netif_running(dev)
+
+#include "rrunner.h"
+
+#define RUN_AT(x) (jiffies + (x))
+
+
+MODULE_AUTHOR("Jes Sorensen <jes@wildopensource.com>");
+MODULE_DESCRIPTION("Essential RoadRunner HIPPI driver");
+MODULE_LICENSE("GPL");
+
+static const char version[] =
+"rrunner.c: v0.50 11/11/2002 Jes Sorensen (jes@wildopensource.com)\n";
+
+
+static const struct net_device_ops rr_netdev_ops = {
+ .ndo_open = rr_open,
+ .ndo_stop = rr_close,
+ .ndo_siocdevprivate = rr_siocdevprivate,
+ .ndo_start_xmit = rr_start_xmit,
+ .ndo_set_mac_address = hippi_mac_addr,
+};
+
+/*
+ * Implementation notes:
+ *
+ * The DMA engine only allows for DMA within physical 64KB chunks of
+ * memory. The current approach of the driver (and stack) is to use
+ * linear blocks of memory for the skbuffs. However, as the data block
+ * is always the first part of the skb and skbs are 2^n aligned so we
+ * are guarantted to get the whole block within one 64KB align 64KB
+ * chunk.
+ *
+ * On the long term, relying on being able to allocate 64KB linear
+ * chunks of memory is not feasible and the skb handling code and the
+ * stack will need to know about I/O vectors or something similar.
+ */
+
+static int rr_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ static int version_disp;
+ u8 pci_latency;
+ struct rr_private *rrpriv;
+ void *tmpptr;
+ dma_addr_t ring_dma;
+ int ret = -ENOMEM;
+
+ dev = alloc_hippi_dev(sizeof(struct rr_private));
+ if (!dev)
+ goto out3;
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ ret = -ENODEV;
+ goto out2;
+ }
+
+ rrpriv = netdev_priv(dev);
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ ret = pci_request_regions(pdev, "rrunner");
+ if (ret < 0)
+ goto out;
+
+ pci_set_drvdata(pdev, dev);
+
+ rrpriv->pci_dev = pdev;
+
+ spin_lock_init(&rrpriv->lock);
+
+ dev->netdev_ops = &rr_netdev_ops;
+
+ /* display version info if adapter is found */
+ if (!version_disp) {
+ /* set display flag to TRUE so that */
+ /* we only display this string ONCE */
+ version_disp = 1;
+ printk(version);
+ }
+
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
+ if (pci_latency <= 0x58){
+ pci_latency = 0x58;
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, pci_latency);
+ }
+
+ pci_set_master(pdev);
+
+ printk(KERN_INFO "%s: Essential RoadRunner serial HIPPI "
+ "at 0x%llx, irq %i, PCI latency %i\n", dev->name,
+ (unsigned long long)pci_resource_start(pdev, 0),
+ pdev->irq, pci_latency);
+
+ /*
+ * Remap the MMIO regs into kernel space.
+ */
+ rrpriv->regs = pci_iomap(pdev, 0, 0x1000);
+ if (!rrpriv->regs) {
+ printk(KERN_ERR "%s: Unable to map I/O register, "
+ "RoadRunner will be disabled.\n", dev->name);
+ ret = -EIO;
+ goto out;
+ }
+
+ tmpptr = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE, &ring_dma,
+ GFP_KERNEL);
+ rrpriv->tx_ring = tmpptr;
+ rrpriv->tx_ring_dma = ring_dma;
+
+ if (!tmpptr) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ tmpptr = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE, &ring_dma,
+ GFP_KERNEL);
+ rrpriv->rx_ring = tmpptr;
+ rrpriv->rx_ring_dma = ring_dma;
+
+ if (!tmpptr) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ tmpptr = dma_alloc_coherent(&pdev->dev, EVT_RING_SIZE, &ring_dma,
+ GFP_KERNEL);
+ rrpriv->evt_ring = tmpptr;
+ rrpriv->evt_ring_dma = ring_dma;
+
+ if (!tmpptr) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * Don't access any register before this point!
+ */
+#ifdef __BIG_ENDIAN
+ writel(readl(&rrpriv->regs->HostCtrl) | NO_SWAP,
+ &rrpriv->regs->HostCtrl);
+#endif
+ /*
+ * Need to add a case for little-endian 64-bit hosts here.
+ */
+
+ rr_init(dev);
+
+ ret = register_netdev(dev);
+ if (ret)
+ goto out;
+ return 0;
+
+ out:
+ if (rrpriv->evt_ring)
+ dma_free_coherent(&pdev->dev, EVT_RING_SIZE, rrpriv->evt_ring,
+ rrpriv->evt_ring_dma);
+ if (rrpriv->rx_ring)
+ dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, rrpriv->rx_ring,
+ rrpriv->rx_ring_dma);
+ if (rrpriv->tx_ring)
+ dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, rrpriv->tx_ring,
+ rrpriv->tx_ring_dma);
+ if (rrpriv->regs)
+ pci_iounmap(pdev, rrpriv->regs);
+ if (pdev)
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ out2:
+ free_netdev(dev);
+ out3:
+ return ret;
+}
+
+static void rr_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rr_private *rr = netdev_priv(dev);
+
+ if (!(readl(&rr->regs->HostCtrl) & NIC_HALTED)) {
+ printk(KERN_ERR "%s: trying to unload running NIC\n",
+ dev->name);
+ writel(HALT_NIC, &rr->regs->HostCtrl);
+ }
+
+ unregister_netdev(dev);
+ dma_free_coherent(&pdev->dev, EVT_RING_SIZE, rr->evt_ring,
+ rr->evt_ring_dma);
+ dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, rr->rx_ring,
+ rr->rx_ring_dma);
+ dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, rr->tx_ring,
+ rr->tx_ring_dma);
+ pci_iounmap(pdev, rr->regs);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ free_netdev(dev);
+}
+
+
+/*
+ * Commands are considered to be slow, thus there is no reason to
+ * inline this.
+ */
+static void rr_issue_cmd(struct rr_private *rrpriv, struct cmd *cmd)
+{
+ struct rr_regs __iomem *regs;
+ u32 idx;
+
+ regs = rrpriv->regs;
+ /*
+ * This is temporary - it will go away in the final version.
+ * We probably also want to make this function inline.
+ */
+ if (readl(&regs->HostCtrl) & NIC_HALTED){
+ printk("issuing command for halted NIC, code 0x%x, "
+ "HostCtrl %08x\n", cmd->code, readl(&regs->HostCtrl));
+ if (readl(&regs->Mode) & FATAL_ERR)
+ printk("error codes Fail1 %02x, Fail2 %02x\n",
+ readl(&regs->Fail1), readl(&regs->Fail2));
+ }
+
+ idx = rrpriv->info->cmd_ctrl.pi;
+
+ writel(*(u32*)(cmd), &regs->CmdRing[idx]);
+ wmb();
+
+ idx = (idx - 1) % CMD_RING_ENTRIES;
+ rrpriv->info->cmd_ctrl.pi = idx;
+ wmb();
+
+ if (readl(&regs->Mode) & FATAL_ERR)
+ printk("error code %02x\n", readl(&regs->Fail1));
+}
+
+
+/*
+ * Reset the board in a sensible manner. The NIC is already halted
+ * when we get here and a spin-lock is held.
+ */
+static int rr_reset(struct net_device *dev)
+{
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ u32 start_pc;
+ int i;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ rr_load_firmware(dev);
+
+ writel(0x01000000, &regs->TX_state);
+ writel(0xff800000, &regs->RX_state);
+ writel(0, &regs->AssistState);
+ writel(CLEAR_INTA, &regs->LocalCtrl);
+ writel(0x01, &regs->BrkPt);
+ writel(0, &regs->Timer);
+ writel(0, &regs->TimerRef);
+ writel(RESET_DMA, &regs->DmaReadState);
+ writel(RESET_DMA, &regs->DmaWriteState);
+ writel(0, &regs->DmaWriteHostHi);
+ writel(0, &regs->DmaWriteHostLo);
+ writel(0, &regs->DmaReadHostHi);
+ writel(0, &regs->DmaReadHostLo);
+ writel(0, &regs->DmaReadLen);
+ writel(0, &regs->DmaWriteLen);
+ writel(0, &regs->DmaWriteLcl);
+ writel(0, &regs->DmaWriteIPchecksum);
+ writel(0, &regs->DmaReadLcl);
+ writel(0, &regs->DmaReadIPchecksum);
+ writel(0, &regs->PciState);
+#if (BITS_PER_LONG == 64) && defined __LITTLE_ENDIAN
+ writel(SWAP_DATA | PTR64BIT | PTR_WD_SWAP, &regs->Mode);
+#elif (BITS_PER_LONG == 64)
+ writel(SWAP_DATA | PTR64BIT | PTR_WD_NOSWAP, &regs->Mode);
+#else
+ writel(SWAP_DATA | PTR32BIT | PTR_WD_NOSWAP, &regs->Mode);
+#endif
+
+#if 0
+ /*
+ * Don't worry, this is just black magic.
+ */
+ writel(0xdf000, &regs->RxBase);
+ writel(0xdf000, &regs->RxPrd);
+ writel(0xdf000, &regs->RxCon);
+ writel(0xce000, &regs->TxBase);
+ writel(0xce000, &regs->TxPrd);
+ writel(0xce000, &regs->TxCon);
+ writel(0, &regs->RxIndPro);
+ writel(0, &regs->RxIndCon);
+ writel(0, &regs->RxIndRef);
+ writel(0, &regs->TxIndPro);
+ writel(0, &regs->TxIndCon);
+ writel(0, &regs->TxIndRef);
+ writel(0xcc000, &regs->pad10[0]);
+ writel(0, &regs->DrCmndPro);
+ writel(0, &regs->DrCmndCon);
+ writel(0, &regs->DwCmndPro);
+ writel(0, &regs->DwCmndCon);
+ writel(0, &regs->DwCmndRef);
+ writel(0, &regs->DrDataPro);
+ writel(0, &regs->DrDataCon);
+ writel(0, &regs->DrDataRef);
+ writel(0, &regs->DwDataPro);
+ writel(0, &regs->DwDataCon);
+ writel(0, &regs->DwDataRef);
+#endif
+
+ writel(0xffffffff, &regs->MbEvent);
+ writel(0, &regs->Event);
+
+ writel(0, &regs->TxPi);
+ writel(0, &regs->IpRxPi);
+
+ writel(0, &regs->EvtCon);
+ writel(0, &regs->EvtPrd);
+
+ rrpriv->info->evt_ctrl.pi = 0;
+
+ for (i = 0; i < CMD_RING_ENTRIES; i++)
+ writel(0, &regs->CmdRing[i]);
+
+/*
+ * Why 32 ? is this not cache line size dependent?
+ */
+ writel(RBURST_64|WBURST_64, &regs->PciState);
+ wmb();
+
+ start_pc = rr_read_eeprom_word(rrpriv,
+ offsetof(struct eeprom, rncd_info.FwStart));
+
+#if (DEBUG > 1)
+ printk("%s: Executing firmware at address 0x%06x\n",
+ dev->name, start_pc);
+#endif
+
+ writel(start_pc + 0x800, &regs->Pc);
+ wmb();
+ udelay(5);
+
+ writel(start_pc, &regs->Pc);
+ wmb();
+
+ return 0;
+}
+
+
+/*
+ * Read a string from the EEPROM.
+ */
+static unsigned int rr_read_eeprom(struct rr_private *rrpriv,
+ unsigned long offset,
+ unsigned char *buf,
+ unsigned long length)
+{
+ struct rr_regs __iomem *regs = rrpriv->regs;
+ u32 misc, io, host, i;
+
+ io = readl(&regs->ExtIo);
+ writel(0, &regs->ExtIo);
+ misc = readl(&regs->LocalCtrl);
+ writel(0, &regs->LocalCtrl);
+ host = readl(&regs->HostCtrl);
+ writel(host | HALT_NIC, &regs->HostCtrl);
+ mb();
+
+ for (i = 0; i < length; i++){
+ writel((EEPROM_BASE + ((offset+i) << 3)), &regs->WinBase);
+ mb();
+ buf[i] = (readl(&regs->WinData) >> 24) & 0xff;
+ mb();
+ }
+
+ writel(host, &regs->HostCtrl);
+ writel(misc, &regs->LocalCtrl);
+ writel(io, &regs->ExtIo);
+ mb();
+ return i;
+}
+
+
+/*
+ * Shortcut to read one word (4 bytes) out of the EEPROM and convert
+ * it to our CPU byte-order.
+ */
+static u32 rr_read_eeprom_word(struct rr_private *rrpriv,
+ size_t offset)
+{
+ __be32 word;
+
+ if ((rr_read_eeprom(rrpriv, offset,
+ (unsigned char *)&word, 4) == 4))
+ return be32_to_cpu(word);
+ return 0;
+}
+
+
+/*
+ * Write a string to the EEPROM.
+ *
+ * This is only called when the firmware is not running.
+ */
+static unsigned int write_eeprom(struct rr_private *rrpriv,
+ unsigned long offset,
+ unsigned char *buf,
+ unsigned long length)
+{
+ struct rr_regs __iomem *regs = rrpriv->regs;
+ u32 misc, io, data, i, j, ready, error = 0;
+
+ io = readl(&regs->ExtIo);
+ writel(0, &regs->ExtIo);
+ misc = readl(&regs->LocalCtrl);
+ writel(ENABLE_EEPROM_WRITE, &regs->LocalCtrl);
+ mb();
+
+ for (i = 0; i < length; i++){
+ writel((EEPROM_BASE + ((offset+i) << 3)), &regs->WinBase);
+ mb();
+ data = buf[i] << 24;
+ /*
+ * Only try to write the data if it is not the same
+ * value already.
+ */
+ if ((readl(&regs->WinData) & 0xff000000) != data){
+ writel(data, &regs->WinData);
+ ready = 0;
+ j = 0;
+ mb();
+ while(!ready){
+ udelay(20);
+ if ((readl(&regs->WinData) & 0xff000000) ==
+ data)
+ ready = 1;
+ mb();
+ if (j++ > 5000){
+ printk("data mismatch: %08x, "
+ "WinData %08x\n", data,
+ readl(&regs->WinData));
+ ready = 1;
+ error = 1;
+ }
+ }
+ }
+ }
+
+ writel(misc, &regs->LocalCtrl);
+ writel(io, &regs->ExtIo);
+ mb();
+
+ return error;
+}
+
+
+static int rr_init(struct net_device *dev)
+{
+ u8 addr[HIPPI_ALEN] __aligned(4);
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ u32 sram_size, rev;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ rev = readl(&regs->FwRev);
+ rrpriv->fw_rev = rev;
+ if (rev > 0x00020024)
+ printk(" Firmware revision: %i.%i.%i\n", (rev >> 16),
+ ((rev >> 8) & 0xff), (rev & 0xff));
+ else if (rev >= 0x00020000) {
+ printk(" Firmware revision: %i.%i.%i (2.0.37 or "
+ "later is recommended)\n", (rev >> 16),
+ ((rev >> 8) & 0xff), (rev & 0xff));
+ }else{
+ printk(" Firmware revision too old: %i.%i.%i, please "
+ "upgrade to 2.0.37 or later.\n",
+ (rev >> 16), ((rev >> 8) & 0xff), (rev & 0xff));
+ }
+
+#if (DEBUG > 2)
+ printk(" Maximum receive rings %i\n", readl(&regs->MaxRxRng));
+#endif
+
+ /*
+ * Read the hardware address from the eeprom. The HW address
+ * is not really necessary for HIPPI but awfully convenient.
+ * The pointer arithmetic to put it in dev_addr is ugly, but
+ * Donald Becker does it this way for the GigE version of this
+ * card and it's shorter and more portable than any
+ * other method I've seen. -VAL
+ */
+
+ *(__be16 *)(addr) =
+ htons(rr_read_eeprom_word(rrpriv, offsetof(struct eeprom, manf.BoardULA)));
+ *(__be32 *)(addr+2) =
+ htonl(rr_read_eeprom_word(rrpriv, offsetof(struct eeprom, manf.BoardULA[4])));
+ dev_addr_set(dev, addr);
+
+ printk(" MAC: %pM\n", dev->dev_addr);
+
+ sram_size = rr_read_eeprom_word(rrpriv, 8);
+ printk(" SRAM size 0x%06x\n", sram_size);
+
+ return 0;
+}
+
+
+static int rr_init1(struct net_device *dev)
+{
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ unsigned long myjif, flags;
+ struct cmd cmd;
+ u32 hostctrl;
+ int ecode = 0;
+ short i;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ spin_lock_irqsave(&rrpriv->lock, flags);
+
+ hostctrl = readl(&regs->HostCtrl);
+ writel(hostctrl | HALT_NIC | RR_CLEAR_INT, &regs->HostCtrl);
+ wmb();
+
+ if (hostctrl & PARITY_ERR){
+ printk("%s: Parity error halting NIC - this is serious!\n",
+ dev->name);
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ ecode = -EFAULT;
+ goto error;
+ }
+
+ set_rxaddr(regs, rrpriv->rx_ctrl_dma);
+ set_infoaddr(regs, rrpriv->info_dma);
+
+ rrpriv->info->evt_ctrl.entry_size = sizeof(struct event);
+ rrpriv->info->evt_ctrl.entries = EVT_RING_ENTRIES;
+ rrpriv->info->evt_ctrl.mode = 0;
+ rrpriv->info->evt_ctrl.pi = 0;
+ set_rraddr(&rrpriv->info->evt_ctrl.rngptr, rrpriv->evt_ring_dma);
+
+ rrpriv->info->cmd_ctrl.entry_size = sizeof(struct cmd);
+ rrpriv->info->cmd_ctrl.entries = CMD_RING_ENTRIES;
+ rrpriv->info->cmd_ctrl.mode = 0;
+ rrpriv->info->cmd_ctrl.pi = 15;
+
+ for (i = 0; i < CMD_RING_ENTRIES; i++) {
+ writel(0, &regs->CmdRing[i]);
+ }
+
+ for (i = 0; i < TX_RING_ENTRIES; i++) {
+ rrpriv->tx_ring[i].size = 0;
+ set_rraddr(&rrpriv->tx_ring[i].addr, 0);
+ rrpriv->tx_skbuff[i] = NULL;
+ }
+ rrpriv->info->tx_ctrl.entry_size = sizeof(struct tx_desc);
+ rrpriv->info->tx_ctrl.entries = TX_RING_ENTRIES;
+ rrpriv->info->tx_ctrl.mode = 0;
+ rrpriv->info->tx_ctrl.pi = 0;
+ set_rraddr(&rrpriv->info->tx_ctrl.rngptr, rrpriv->tx_ring_dma);
+
+ /*
+ * Set dirty_tx before we start receiving interrupts, otherwise
+ * the interrupt handler might think it is supposed to process
+ * tx ints before we are up and running, which may cause a null
+ * pointer access in the int handler.
+ */
+ rrpriv->tx_full = 0;
+ rrpriv->cur_rx = 0;
+ rrpriv->dirty_rx = rrpriv->dirty_tx = 0;
+
+ rr_reset(dev);
+
+ /* Tuning values */
+ writel(0x5000, &regs->ConRetry);
+ writel(0x100, &regs->ConRetryTmr);
+ writel(0x500000, &regs->ConTmout);
+ writel(0x60, &regs->IntrTmr);
+ writel(0x500000, &regs->TxDataMvTimeout);
+ writel(0x200000, &regs->RxDataMvTimeout);
+ writel(0x80, &regs->WriteDmaThresh);
+ writel(0x80, &regs->ReadDmaThresh);
+
+ rrpriv->fw_running = 0;
+ wmb();
+
+ hostctrl &= ~(HALT_NIC | INVALID_INST_B | PARITY_ERR);
+ writel(hostctrl, &regs->HostCtrl);
+ wmb();
+
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+
+ for (i = 0; i < RX_RING_ENTRIES; i++) {
+ struct sk_buff *skb;
+ dma_addr_t addr;
+
+ rrpriv->rx_ring[i].mode = 0;
+ skb = alloc_skb(dev->mtu + HIPPI_HLEN, GFP_ATOMIC);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Unable to allocate memory "
+ "for receive ring - halting NIC\n", dev->name);
+ ecode = -ENOMEM;
+ goto error;
+ }
+ rrpriv->rx_skbuff[i] = skb;
+ addr = dma_map_single(&rrpriv->pci_dev->dev, skb->data,
+ dev->mtu + HIPPI_HLEN, DMA_FROM_DEVICE);
+ /*
+ * Sanity test to see if we conflict with the DMA
+ * limitations of the Roadrunner.
+ */
+ if ((((unsigned long)skb->data) & 0xfff) > ~65320)
+ printk("skb alloc error\n");
+
+ set_rraddr(&rrpriv->rx_ring[i].addr, addr);
+ rrpriv->rx_ring[i].size = dev->mtu + HIPPI_HLEN;
+ }
+
+ rrpriv->rx_ctrl[4].entry_size = sizeof(struct rx_desc);
+ rrpriv->rx_ctrl[4].entries = RX_RING_ENTRIES;
+ rrpriv->rx_ctrl[4].mode = 8;
+ rrpriv->rx_ctrl[4].pi = 0;
+ wmb();
+ set_rraddr(&rrpriv->rx_ctrl[4].rngptr, rrpriv->rx_ring_dma);
+
+ udelay(1000);
+
+ /*
+ * Now start the FirmWare.
+ */
+ cmd.code = C_START_FW;
+ cmd.ring = 0;
+ cmd.index = 0;
+
+ rr_issue_cmd(rrpriv, &cmd);
+
+ /*
+ * Give the FirmWare time to chew on the `get running' command.
+ */
+ myjif = jiffies + 5 * HZ;
+ while (time_before(jiffies, myjif) && !rrpriv->fw_running)
+ cpu_relax();
+
+ netif_start_queue(dev);
+
+ return ecode;
+
+ error:
+ /*
+ * We might have gotten here because we are out of memory,
+ * make sure we release everything we allocated before failing
+ */
+ for (i = 0; i < RX_RING_ENTRIES; i++) {
+ struct sk_buff *skb = rrpriv->rx_skbuff[i];
+
+ if (skb) {
+ dma_unmap_single(&rrpriv->pci_dev->dev,
+ rrpriv->rx_ring[i].addr.addrlo,
+ dev->mtu + HIPPI_HLEN,
+ DMA_FROM_DEVICE);
+ rrpriv->rx_ring[i].size = 0;
+ set_rraddr(&rrpriv->rx_ring[i].addr, 0);
+ dev_kfree_skb(skb);
+ rrpriv->rx_skbuff[i] = NULL;
+ }
+ }
+ return ecode;
+}
+
+
+/*
+ * All events are considered to be slow (RX/TX ints do not generate
+ * events) and are handled here, outside the main interrupt handler,
+ * to reduce the size of the handler.
+ */
+static u32 rr_handle_event(struct net_device *dev, u32 prodidx, u32 eidx)
+{
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ u32 tmp;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ while (prodidx != eidx){
+ switch (rrpriv->evt_ring[eidx].code){
+ case E_NIC_UP:
+ tmp = readl(&regs->FwRev);
+ printk(KERN_INFO "%s: Firmware revision %i.%i.%i "
+ "up and running\n", dev->name,
+ (tmp >> 16), ((tmp >> 8) & 0xff), (tmp & 0xff));
+ rrpriv->fw_running = 1;
+ writel(RX_RING_ENTRIES - 1, &regs->IpRxPi);
+ wmb();
+ break;
+ case E_LINK_ON:
+ printk(KERN_INFO "%s: Optical link ON\n", dev->name);
+ break;
+ case E_LINK_OFF:
+ printk(KERN_INFO "%s: Optical link OFF\n", dev->name);
+ break;
+ case E_RX_IDLE:
+ printk(KERN_WARNING "%s: RX data not moving\n",
+ dev->name);
+ goto drop;
+ case E_WATCHDOG:
+ printk(KERN_INFO "%s: The watchdog is here to see "
+ "us\n", dev->name);
+ break;
+ case E_INTERN_ERR:
+ printk(KERN_ERR "%s: HIPPI Internal NIC error\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_HOST_ERR:
+ printk(KERN_ERR "%s: Host software error\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ /*
+ * TX events.
+ */
+ case E_CON_REJ:
+ printk(KERN_WARNING "%s: Connection rejected\n",
+ dev->name);
+ dev->stats.tx_aborted_errors++;
+ break;
+ case E_CON_TMOUT:
+ printk(KERN_WARNING "%s: Connection timeout\n",
+ dev->name);
+ break;
+ case E_DISC_ERR:
+ printk(KERN_WARNING "%s: HIPPI disconnect error\n",
+ dev->name);
+ dev->stats.tx_aborted_errors++;
+ break;
+ case E_INT_PRTY:
+ printk(KERN_ERR "%s: HIPPI Internal Parity error\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_TX_IDLE:
+ printk(KERN_WARNING "%s: Transmitter idle\n",
+ dev->name);
+ break;
+ case E_TX_LINK_DROP:
+ printk(KERN_WARNING "%s: Link lost during transmit\n",
+ dev->name);
+ dev->stats.tx_aborted_errors++;
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_TX_INV_RNG:
+ printk(KERN_ERR "%s: Invalid send ring block\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_TX_INV_BUF:
+ printk(KERN_ERR "%s: Invalid send buffer address\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_TX_INV_DSC:
+ printk(KERN_ERR "%s: Invalid descriptor address\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ /*
+ * RX events.
+ */
+ case E_RX_RNG_OUT:
+ printk(KERN_INFO "%s: Receive ring full\n", dev->name);
+ break;
+
+ case E_RX_PAR_ERR:
+ printk(KERN_WARNING "%s: Receive parity error\n",
+ dev->name);
+ goto drop;
+ case E_RX_LLRC_ERR:
+ printk(KERN_WARNING "%s: Receive LLRC error\n",
+ dev->name);
+ goto drop;
+ case E_PKT_LN_ERR:
+ printk(KERN_WARNING "%s: Receive packet length "
+ "error\n", dev->name);
+ goto drop;
+ case E_DTA_CKSM_ERR:
+ printk(KERN_WARNING "%s: Data checksum error\n",
+ dev->name);
+ goto drop;
+ case E_SHT_BST:
+ printk(KERN_WARNING "%s: Unexpected short burst "
+ "error\n", dev->name);
+ goto drop;
+ case E_STATE_ERR:
+ printk(KERN_WARNING "%s: Recv. state transition"
+ " error\n", dev->name);
+ goto drop;
+ case E_UNEXP_DATA:
+ printk(KERN_WARNING "%s: Unexpected data error\n",
+ dev->name);
+ goto drop;
+ case E_LST_LNK_ERR:
+ printk(KERN_WARNING "%s: Link lost error\n",
+ dev->name);
+ goto drop;
+ case E_FRM_ERR:
+ printk(KERN_WARNING "%s: Framing Error\n",
+ dev->name);
+ goto drop;
+ case E_FLG_SYN_ERR:
+ printk(KERN_WARNING "%s: Flag sync. lost during "
+ "packet\n", dev->name);
+ goto drop;
+ case E_RX_INV_BUF:
+ printk(KERN_ERR "%s: Invalid receive buffer "
+ "address\n", dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_RX_INV_DSC:
+ printk(KERN_ERR "%s: Invalid receive descriptor "
+ "address\n", dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ case E_RNG_BLK:
+ printk(KERN_ERR "%s: Invalid ring block\n",
+ dev->name);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ wmb();
+ break;
+ drop:
+ /* Label packet to be dropped.
+ * Actual dropping occurs in rx
+ * handling.
+ *
+ * The index of packet we get to drop is
+ * the index of the packet following
+ * the bad packet. -kbf
+ */
+ {
+ u16 index = rrpriv->evt_ring[eidx].index;
+ index = (index + (RX_RING_ENTRIES - 1)) %
+ RX_RING_ENTRIES;
+ rrpriv->rx_ring[index].mode |=
+ (PACKET_BAD | PACKET_END);
+ }
+ break;
+ default:
+ printk(KERN_WARNING "%s: Unhandled event 0x%02x\n",
+ dev->name, rrpriv->evt_ring[eidx].code);
+ }
+ eidx = (eidx + 1) % EVT_RING_ENTRIES;
+ }
+
+ rrpriv->info->evt_ctrl.pi = eidx;
+ wmb();
+ return eidx;
+}
+
+
+static void rx_int(struct net_device *dev, u32 rxlimit, u32 index)
+{
+ struct rr_private *rrpriv = netdev_priv(dev);
+ struct rr_regs __iomem *regs = rrpriv->regs;
+
+ do {
+ struct rx_desc *desc;
+ u32 pkt_len;
+
+ desc = &(rrpriv->rx_ring[index]);
+ pkt_len = desc->size;
+#if (DEBUG > 2)
+ printk("index %i, rxlimit %i\n", index, rxlimit);
+ printk("len %x, mode %x\n", pkt_len, desc->mode);
+#endif
+ if ( (rrpriv->rx_ring[index].mode & PACKET_BAD) == PACKET_BAD){
+ dev->stats.rx_dropped++;
+ goto defer;
+ }
+
+ if (pkt_len > 0){
+ struct sk_buff *skb, *rx_skb;
+
+ rx_skb = rrpriv->rx_skbuff[index];
+
+ if (pkt_len < PKT_COPY_THRESHOLD) {
+ skb = alloc_skb(pkt_len, GFP_ATOMIC);
+ if (skb == NULL){
+ printk(KERN_WARNING "%s: Unable to allocate skb (%i bytes), deferring packet\n", dev->name, pkt_len);
+ dev->stats.rx_dropped++;
+ goto defer;
+ } else {
+ dma_sync_single_for_cpu(&rrpriv->pci_dev->dev,
+ desc->addr.addrlo,
+ pkt_len,
+ DMA_FROM_DEVICE);
+
+ skb_put_data(skb, rx_skb->data,
+ pkt_len);
+
+ dma_sync_single_for_device(&rrpriv->pci_dev->dev,
+ desc->addr.addrlo,
+ pkt_len,
+ DMA_FROM_DEVICE);
+ }
+ }else{
+ struct sk_buff *newskb;
+
+ newskb = alloc_skb(dev->mtu + HIPPI_HLEN,
+ GFP_ATOMIC);
+ if (newskb){
+ dma_addr_t addr;
+
+ dma_unmap_single(&rrpriv->pci_dev->dev,
+ desc->addr.addrlo,
+ dev->mtu + HIPPI_HLEN,
+ DMA_FROM_DEVICE);
+ skb = rx_skb;
+ skb_put(skb, pkt_len);
+ rrpriv->rx_skbuff[index] = newskb;
+ addr = dma_map_single(&rrpriv->pci_dev->dev,
+ newskb->data,
+ dev->mtu + HIPPI_HLEN,
+ DMA_FROM_DEVICE);
+ set_rraddr(&desc->addr, addr);
+ } else {
+ printk("%s: Out of memory, deferring "
+ "packet\n", dev->name);
+ dev->stats.rx_dropped++;
+ goto defer;
+ }
+ }
+ skb->protocol = hippi_type_trans(skb, dev);
+
+ netif_rx(skb); /* send it up */
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ }
+ defer:
+ desc->mode = 0;
+ desc->size = dev->mtu + HIPPI_HLEN;
+
+ if ((index & 7) == 7)
+ writel(index, &regs->IpRxPi);
+
+ index = (index + 1) % RX_RING_ENTRIES;
+ } while(index != rxlimit);
+
+ rrpriv->cur_rx = index;
+ wmb();
+}
+
+
+static irqreturn_t rr_interrupt(int irq, void *dev_id)
+{
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ struct net_device *dev = (struct net_device *)dev_id;
+ u32 prodidx, rxindex, eidx, txcsmr, rxlimit, txcon;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ if (!(readl(&regs->HostCtrl) & RR_INT))
+ return IRQ_NONE;
+
+ spin_lock(&rrpriv->lock);
+
+ prodidx = readl(&regs->EvtPrd);
+ txcsmr = (prodidx >> 8) & 0xff;
+ rxlimit = (prodidx >> 16) & 0xff;
+ prodidx &= 0xff;
+
+#if (DEBUG > 2)
+ printk("%s: interrupt, prodidx = %i, eidx = %i\n", dev->name,
+ prodidx, rrpriv->info->evt_ctrl.pi);
+#endif
+ /*
+ * Order here is important. We must handle events
+ * before doing anything else in order to catch
+ * such things as LLRC errors, etc -kbf
+ */
+
+ eidx = rrpriv->info->evt_ctrl.pi;
+ if (prodidx != eidx)
+ eidx = rr_handle_event(dev, prodidx, eidx);
+
+ rxindex = rrpriv->cur_rx;
+ if (rxindex != rxlimit)
+ rx_int(dev, rxlimit, rxindex);
+
+ txcon = rrpriv->dirty_tx;
+ if (txcsmr != txcon) {
+ do {
+ /* Due to occational firmware TX producer/consumer out
+ * of sync. error need to check entry in ring -kbf
+ */
+ if(rrpriv->tx_skbuff[txcon]){
+ struct tx_desc *desc;
+ struct sk_buff *skb;
+
+ desc = &(rrpriv->tx_ring[txcon]);
+ skb = rrpriv->tx_skbuff[txcon];
+
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ dma_unmap_single(&rrpriv->pci_dev->dev,
+ desc->addr.addrlo, skb->len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_irq(skb);
+
+ rrpriv->tx_skbuff[txcon] = NULL;
+ desc->size = 0;
+ set_rraddr(&rrpriv->tx_ring[txcon].addr, 0);
+ desc->mode = 0;
+ }
+ txcon = (txcon + 1) % TX_RING_ENTRIES;
+ } while (txcsmr != txcon);
+ wmb();
+
+ rrpriv->dirty_tx = txcon;
+ if (rrpriv->tx_full && rr_if_busy(dev) &&
+ (((rrpriv->info->tx_ctrl.pi + 1) % TX_RING_ENTRIES)
+ != rrpriv->dirty_tx)){
+ rrpriv->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+ }
+
+ eidx |= ((txcsmr << 8) | (rxlimit << 16));
+ writel(eidx, &regs->EvtCon);
+ wmb();
+
+ spin_unlock(&rrpriv->lock);
+ return IRQ_HANDLED;
+}
+
+static inline void rr_raz_tx(struct rr_private *rrpriv,
+ struct net_device *dev)
+{
+ int i;
+
+ for (i = 0; i < TX_RING_ENTRIES; i++) {
+ struct sk_buff *skb = rrpriv->tx_skbuff[i];
+
+ if (skb) {
+ struct tx_desc *desc = &(rrpriv->tx_ring[i]);
+
+ dma_unmap_single(&rrpriv->pci_dev->dev,
+ desc->addr.addrlo, skb->len,
+ DMA_TO_DEVICE);
+ desc->size = 0;
+ set_rraddr(&desc->addr, 0);
+ dev_kfree_skb(skb);
+ rrpriv->tx_skbuff[i] = NULL;
+ }
+ }
+}
+
+
+static inline void rr_raz_rx(struct rr_private *rrpriv,
+ struct net_device *dev)
+{
+ int i;
+
+ for (i = 0; i < RX_RING_ENTRIES; i++) {
+ struct sk_buff *skb = rrpriv->rx_skbuff[i];
+
+ if (skb) {
+ struct rx_desc *desc = &(rrpriv->rx_ring[i]);
+
+ dma_unmap_single(&rrpriv->pci_dev->dev,
+ desc->addr.addrlo,
+ dev->mtu + HIPPI_HLEN,
+ DMA_FROM_DEVICE);
+ desc->size = 0;
+ set_rraddr(&desc->addr, 0);
+ dev_kfree_skb(skb);
+ rrpriv->rx_skbuff[i] = NULL;
+ }
+ }
+}
+
+static void rr_timer(struct timer_list *t)
+{
+ struct rr_private *rrpriv = from_timer(rrpriv, t, timer);
+ struct net_device *dev = pci_get_drvdata(rrpriv->pci_dev);
+ struct rr_regs __iomem *regs = rrpriv->regs;
+ unsigned long flags;
+
+ if (readl(&regs->HostCtrl) & NIC_HALTED){
+ printk("%s: Restarting nic\n", dev->name);
+ memset(rrpriv->rx_ctrl, 0, 256 * sizeof(struct ring_ctrl));
+ memset(rrpriv->info, 0, sizeof(struct rr_info));
+ wmb();
+
+ rr_raz_tx(rrpriv, dev);
+ rr_raz_rx(rrpriv, dev);
+
+ if (rr_init1(dev)) {
+ spin_lock_irqsave(&rrpriv->lock, flags);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT,
+ &regs->HostCtrl);
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ }
+ }
+ rrpriv->timer.expires = RUN_AT(5*HZ);
+ add_timer(&rrpriv->timer);
+}
+
+
+static int rr_open(struct net_device *dev)
+{
+ struct rr_private *rrpriv = netdev_priv(dev);
+ struct pci_dev *pdev = rrpriv->pci_dev;
+ struct rr_regs __iomem *regs;
+ int ecode = 0;
+ unsigned long flags;
+ dma_addr_t dma_addr;
+
+ regs = rrpriv->regs;
+
+ if (rrpriv->fw_rev < 0x00020000) {
+ printk(KERN_WARNING "%s: trying to configure device with "
+ "obsolete firmware\n", dev->name);
+ ecode = -EBUSY;
+ goto error;
+ }
+
+ rrpriv->rx_ctrl = dma_alloc_coherent(&pdev->dev,
+ 256 * sizeof(struct ring_ctrl),
+ &dma_addr, GFP_KERNEL);
+ if (!rrpriv->rx_ctrl) {
+ ecode = -ENOMEM;
+ goto error;
+ }
+ rrpriv->rx_ctrl_dma = dma_addr;
+
+ rrpriv->info = dma_alloc_coherent(&pdev->dev, sizeof(struct rr_info),
+ &dma_addr, GFP_KERNEL);
+ if (!rrpriv->info) {
+ ecode = -ENOMEM;
+ goto error;
+ }
+ rrpriv->info_dma = dma_addr;
+ wmb();
+
+ spin_lock_irqsave(&rrpriv->lock, flags);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT, &regs->HostCtrl);
+ readl(&regs->HostCtrl);
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+
+ if (request_irq(pdev->irq, rr_interrupt, IRQF_SHARED, dev->name, dev)) {
+ printk(KERN_WARNING "%s: Requested IRQ %d is busy\n",
+ dev->name, pdev->irq);
+ ecode = -EAGAIN;
+ goto error;
+ }
+
+ if ((ecode = rr_init1(dev)))
+ goto error;
+
+ /* Set the timer to switch to check for link beat and perhaps switch
+ to an alternate media type. */
+ timer_setup(&rrpriv->timer, rr_timer, 0);
+ rrpriv->timer.expires = RUN_AT(5*HZ); /* 5 sec. watchdog */
+ add_timer(&rrpriv->timer);
+
+ netif_start_queue(dev);
+
+ return ecode;
+
+ error:
+ spin_lock_irqsave(&rrpriv->lock, flags);
+ writel(readl(&regs->HostCtrl)|HALT_NIC|RR_CLEAR_INT, &regs->HostCtrl);
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+
+ if (rrpriv->info) {
+ dma_free_coherent(&pdev->dev, sizeof(struct rr_info),
+ rrpriv->info, rrpriv->info_dma);
+ rrpriv->info = NULL;
+ }
+ if (rrpriv->rx_ctrl) {
+ dma_free_coherent(&pdev->dev, 256 * sizeof(struct ring_ctrl),
+ rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma);
+ rrpriv->rx_ctrl = NULL;
+ }
+
+ netif_stop_queue(dev);
+
+ return ecode;
+}
+
+
+static void rr_dump(struct net_device *dev)
+{
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ u32 index, cons;
+ short i;
+ int len;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ printk("%s: dumping NIC TX rings\n", dev->name);
+
+ printk("RxPrd %08x, TxPrd %02x, EvtPrd %08x, TxPi %02x, TxCtrlPi %02x\n",
+ readl(&regs->RxPrd), readl(&regs->TxPrd),
+ readl(&regs->EvtPrd), readl(&regs->TxPi),
+ rrpriv->info->tx_ctrl.pi);
+
+ printk("Error code 0x%x\n", readl(&regs->Fail1));
+
+ index = (((readl(&regs->EvtPrd) >> 8) & 0xff) - 1) % TX_RING_ENTRIES;
+ cons = rrpriv->dirty_tx;
+ printk("TX ring index %i, TX consumer %i\n",
+ index, cons);
+
+ if (rrpriv->tx_skbuff[index]){
+ len = min_t(int, 0x80, rrpriv->tx_skbuff[index]->len);
+ printk("skbuff for index %i is valid - dumping data (0x%x bytes - DMA len 0x%x)\n", index, len, rrpriv->tx_ring[index].size);
+ for (i = 0; i < len; i++){
+ if (!(i & 7))
+ printk("\n");
+ printk("%02x ", (unsigned char) rrpriv->tx_skbuff[index]->data[i]);
+ }
+ printk("\n");
+ }
+
+ if (rrpriv->tx_skbuff[cons]){
+ len = min_t(int, 0x80, rrpriv->tx_skbuff[cons]->len);
+ printk("skbuff for cons %i is valid - dumping data (0x%x bytes - skbuff len 0x%x)\n", cons, len, rrpriv->tx_skbuff[cons]->len);
+ printk("mode 0x%x, size 0x%x,\n phys %08Lx, skbuff-addr %p, truesize 0x%x\n",
+ rrpriv->tx_ring[cons].mode,
+ rrpriv->tx_ring[cons].size,
+ (unsigned long long) rrpriv->tx_ring[cons].addr.addrlo,
+ rrpriv->tx_skbuff[cons]->data,
+ (unsigned int)rrpriv->tx_skbuff[cons]->truesize);
+ for (i = 0; i < len; i++){
+ if (!(i & 7))
+ printk("\n");
+ printk("%02x ", (unsigned char)rrpriv->tx_ring[cons].size);
+ }
+ printk("\n");
+ }
+
+ printk("dumping TX ring info:\n");
+ for (i = 0; i < TX_RING_ENTRIES; i++)
+ printk("mode 0x%x, size 0x%x, phys-addr %08Lx\n",
+ rrpriv->tx_ring[i].mode,
+ rrpriv->tx_ring[i].size,
+ (unsigned long long) rrpriv->tx_ring[i].addr.addrlo);
+
+}
+
+
+static int rr_close(struct net_device *dev)
+{
+ struct rr_private *rrpriv = netdev_priv(dev);
+ struct rr_regs __iomem *regs = rrpriv->regs;
+ struct pci_dev *pdev = rrpriv->pci_dev;
+ unsigned long flags;
+ u32 tmp;
+ short i;
+
+ netif_stop_queue(dev);
+
+
+ /*
+ * Lock to make sure we are not cleaning up while another CPU
+ * is handling interrupts.
+ */
+ spin_lock_irqsave(&rrpriv->lock, flags);
+
+ tmp = readl(&regs->HostCtrl);
+ if (tmp & NIC_HALTED){
+ printk("%s: NIC already halted\n", dev->name);
+ rr_dump(dev);
+ }else{
+ tmp |= HALT_NIC | RR_CLEAR_INT;
+ writel(tmp, &regs->HostCtrl);
+ readl(&regs->HostCtrl);
+ }
+
+ rrpriv->fw_running = 0;
+
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ del_timer_sync(&rrpriv->timer);
+ spin_lock_irqsave(&rrpriv->lock, flags);
+
+ writel(0, &regs->TxPi);
+ writel(0, &regs->IpRxPi);
+
+ writel(0, &regs->EvtCon);
+ writel(0, &regs->EvtPrd);
+
+ for (i = 0; i < CMD_RING_ENTRIES; i++)
+ writel(0, &regs->CmdRing[i]);
+
+ rrpriv->info->tx_ctrl.entries = 0;
+ rrpriv->info->cmd_ctrl.pi = 0;
+ rrpriv->info->evt_ctrl.pi = 0;
+ rrpriv->rx_ctrl[4].entries = 0;
+
+ rr_raz_tx(rrpriv, dev);
+ rr_raz_rx(rrpriv, dev);
+
+ dma_free_coherent(&pdev->dev, 256 * sizeof(struct ring_ctrl),
+ rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma);
+ rrpriv->rx_ctrl = NULL;
+
+ dma_free_coherent(&pdev->dev, sizeof(struct rr_info), rrpriv->info,
+ rrpriv->info_dma);
+ rrpriv->info = NULL;
+
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ free_irq(pdev->irq, dev);
+
+ return 0;
+}
+
+
+static netdev_tx_t rr_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rr_private *rrpriv = netdev_priv(dev);
+ struct rr_regs __iomem *regs = rrpriv->regs;
+ struct hippi_cb *hcb = (struct hippi_cb *) skb->cb;
+ struct ring_ctrl *txctrl;
+ unsigned long flags;
+ u32 index, len = skb->len;
+ u32 *ifield;
+ struct sk_buff *new_skb;
+
+ if (readl(&regs->Mode) & FATAL_ERR)
+ printk("error codes Fail1 %02x, Fail2 %02x\n",
+ readl(&regs->Fail1), readl(&regs->Fail2));
+
+ /*
+ * We probably need to deal with tbusy here to prevent overruns.
+ */
+
+ if (skb_headroom(skb) < 8){
+ printk("incoming skb too small - reallocating\n");
+ if (!(new_skb = dev_alloc_skb(len + 8))) {
+ dev_kfree_skb(skb);
+ netif_wake_queue(dev);
+ return NETDEV_TX_OK;
+ }
+ skb_reserve(new_skb, 8);
+ skb_put(new_skb, len);
+ skb_copy_from_linear_data(skb, new_skb->data, len);
+ dev_kfree_skb(skb);
+ skb = new_skb;
+ }
+
+ ifield = skb_push(skb, 8);
+
+ ifield[0] = 0;
+ ifield[1] = hcb->ifield;
+
+ /*
+ * We don't need the lock before we are actually going to start
+ * fiddling with the control blocks.
+ */
+ spin_lock_irqsave(&rrpriv->lock, flags);
+
+ txctrl = &rrpriv->info->tx_ctrl;
+
+ index = txctrl->pi;
+
+ rrpriv->tx_skbuff[index] = skb;
+ set_rraddr(&rrpriv->tx_ring[index].addr,
+ dma_map_single(&rrpriv->pci_dev->dev, skb->data, len + 8, DMA_TO_DEVICE));
+ rrpriv->tx_ring[index].size = len + 8; /* include IFIELD */
+ rrpriv->tx_ring[index].mode = PACKET_START | PACKET_END;
+ txctrl->pi = (index + 1) % TX_RING_ENTRIES;
+ wmb();
+ writel(txctrl->pi, &regs->TxPi);
+
+ if (txctrl->pi == rrpriv->dirty_tx){
+ rrpriv->tx_full = 1;
+ netif_stop_queue(dev);
+ }
+
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+
+/*
+ * Read the firmware out of the EEPROM and put it into the SRAM
+ * (or from user space - later)
+ *
+ * This operation requires the NIC to be halted and is performed with
+ * interrupts disabled and with the spinlock hold.
+ */
+static int rr_load_firmware(struct net_device *dev)
+{
+ struct rr_private *rrpriv;
+ struct rr_regs __iomem *regs;
+ size_t eptr, segptr;
+ int i, j;
+ u32 localctrl, sptr, len, tmp;
+ u32 p2len, p2size, nr_seg, revision, io, sram_size;
+
+ rrpriv = netdev_priv(dev);
+ regs = rrpriv->regs;
+
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ if (!(readl(&regs->HostCtrl) & NIC_HALTED)){
+ printk("%s: Trying to load firmware to a running NIC.\n",
+ dev->name);
+ return -EBUSY;
+ }
+
+ localctrl = readl(&regs->LocalCtrl);
+ writel(0, &regs->LocalCtrl);
+
+ writel(0, &regs->EvtPrd);
+ writel(0, &regs->RxPrd);
+ writel(0, &regs->TxPrd);
+
+ /*
+ * First wipe the entire SRAM, otherwise we might run into all
+ * kinds of trouble ... sigh, this took almost all afternoon
+ * to track down ;-(
+ */
+ io = readl(&regs->ExtIo);
+ writel(0, &regs->ExtIo);
+ sram_size = rr_read_eeprom_word(rrpriv, 8);
+
+ for (i = 200; i < sram_size / 4; i++){
+ writel(i * 4, &regs->WinBase);
+ mb();
+ writel(0, &regs->WinData);
+ mb();
+ }
+ writel(io, &regs->ExtIo);
+ mb();
+
+ eptr = rr_read_eeprom_word(rrpriv,
+ offsetof(struct eeprom, rncd_info.AddrRunCodeSegs));
+ eptr = ((eptr & 0x1fffff) >> 3);
+
+ p2len = rr_read_eeprom_word(rrpriv, 0x83*4);
+ p2len = (p2len << 2);
+ p2size = rr_read_eeprom_word(rrpriv, 0x84*4);
+ p2size = ((p2size & 0x1fffff) >> 3);
+
+ if ((eptr < p2size) || (eptr > (p2size + p2len))){
+ printk("%s: eptr is invalid\n", dev->name);
+ goto out;
+ }
+
+ revision = rr_read_eeprom_word(rrpriv,
+ offsetof(struct eeprom, manf.HeaderFmt));
+
+ if (revision != 1){
+ printk("%s: invalid firmware format (%i)\n",
+ dev->name, revision);
+ goto out;
+ }
+
+ nr_seg = rr_read_eeprom_word(rrpriv, eptr);
+ eptr +=4;
+#if (DEBUG > 1)
+ printk("%s: nr_seg %i\n", dev->name, nr_seg);
+#endif
+
+ for (i = 0; i < nr_seg; i++){
+ sptr = rr_read_eeprom_word(rrpriv, eptr);
+ eptr += 4;
+ len = rr_read_eeprom_word(rrpriv, eptr);
+ eptr += 4;
+ segptr = rr_read_eeprom_word(rrpriv, eptr);
+ segptr = ((segptr & 0x1fffff) >> 3);
+ eptr += 4;
+#if (DEBUG > 1)
+ printk("%s: segment %i, sram address %06x, length %04x, segptr %06x\n",
+ dev->name, i, sptr, len, segptr);
+#endif
+ for (j = 0; j < len; j++){
+ tmp = rr_read_eeprom_word(rrpriv, segptr);
+ writel(sptr, &regs->WinBase);
+ mb();
+ writel(tmp, &regs->WinData);
+ mb();
+ segptr += 4;
+ sptr += 4;
+ }
+ }
+
+out:
+ writel(localctrl, &regs->LocalCtrl);
+ mb();
+ return 0;
+}
+
+
+static int rr_siocdevprivate(struct net_device *dev, struct ifreq *rq,
+ void __user *data, int cmd)
+{
+ struct rr_private *rrpriv;
+ unsigned char *image, *oldimage;
+ unsigned long flags;
+ unsigned int i;
+ int error = -EOPNOTSUPP;
+
+ rrpriv = netdev_priv(dev);
+
+ switch(cmd){
+ case SIOCRRGFW:
+ if (!capable(CAP_SYS_RAWIO)){
+ return -EPERM;
+ }
+
+ image = kmalloc_array(EEPROM_WORDS, sizeof(u32), GFP_KERNEL);
+ if (!image)
+ return -ENOMEM;
+
+ if (rrpriv->fw_running){
+ printk("%s: Firmware already running\n", dev->name);
+ error = -EPERM;
+ goto gf_out;
+ }
+
+ spin_lock_irqsave(&rrpriv->lock, flags);
+ i = rr_read_eeprom(rrpriv, 0, image, EEPROM_BYTES);
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ if (i != EEPROM_BYTES){
+ printk(KERN_ERR "%s: Error reading EEPROM\n",
+ dev->name);
+ error = -EFAULT;
+ goto gf_out;
+ }
+ error = copy_to_user(data, image, EEPROM_BYTES);
+ if (error)
+ error = -EFAULT;
+ gf_out:
+ kfree(image);
+ return error;
+
+ case SIOCRRPFW:
+ if (!capable(CAP_SYS_RAWIO)){
+ return -EPERM;
+ }
+
+ image = memdup_user(data, EEPROM_BYTES);
+ if (IS_ERR(image))
+ return PTR_ERR(image);
+
+ oldimage = kmalloc(EEPROM_BYTES, GFP_KERNEL);
+ if (!oldimage) {
+ kfree(image);
+ return -ENOMEM;
+ }
+
+ if (rrpriv->fw_running){
+ printk("%s: Firmware already running\n", dev->name);
+ error = -EPERM;
+ goto wf_out;
+ }
+
+ printk("%s: Updating EEPROM firmware\n", dev->name);
+
+ spin_lock_irqsave(&rrpriv->lock, flags);
+ error = write_eeprom(rrpriv, 0, image, EEPROM_BYTES);
+ if (error)
+ printk(KERN_ERR "%s: Error writing EEPROM\n",
+ dev->name);
+
+ i = rr_read_eeprom(rrpriv, 0, oldimage, EEPROM_BYTES);
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
+
+ if (i != EEPROM_BYTES)
+ printk(KERN_ERR "%s: Error reading back EEPROM "
+ "image\n", dev->name);
+
+ error = memcmp(image, oldimage, EEPROM_BYTES);
+ if (error){
+ printk(KERN_ERR "%s: Error verifying EEPROM image\n",
+ dev->name);
+ error = -EFAULT;
+ }
+ wf_out:
+ kfree(oldimage);
+ kfree(image);
+ return error;
+
+ case SIOCRRID:
+ return put_user(0x52523032, (int __user *)data);
+ default:
+ return error;
+ }
+}
+
+static const struct pci_device_id rr_pci_tbl[] = {
+ { PCI_VENDOR_ID_ESSENTIAL, PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, rr_pci_tbl);
+
+static struct pci_driver rr_driver = {
+ .name = "rrunner",
+ .id_table = rr_pci_tbl,
+ .probe = rr_init_one,
+ .remove = rr_remove_one,
+};
+
+module_pci_driver(rr_driver);
diff --git a/drivers/net/hippi/rrunner.h b/drivers/net/hippi/rrunner.h
new file mode 100644
index 000000000..55377614e
--- /dev/null
+++ b/drivers/net/hippi/rrunner.h
@@ -0,0 +1,848 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _RRUNNER_H_
+#define _RRUNNER_H_
+
+#include <linux/interrupt.h>
+
+#if ((BITS_PER_LONG != 32) && (BITS_PER_LONG != 64))
+#error "BITS_PER_LONG not defined or not valid"
+#endif
+
+
+struct rr_regs {
+
+ u32 pad0[16];
+
+ u32 HostCtrl;
+ u32 LocalCtrl;
+ u32 Pc;
+ u32 BrkPt;
+
+/* Timer increments every 0.97 micro-seconds (unsigned int) */
+ u32 Timer_Hi;
+ u32 Timer;
+ u32 TimerRef;
+ u32 PciState;
+
+ u32 Event;
+ u32 MbEvent;
+
+ u32 WinBase;
+ u32 WinData;
+ u32 RX_state;
+ u32 TX_state;
+
+ u32 Overhead;
+ u32 ExtIo;
+
+ u32 DmaWriteHostHi;
+ u32 DmaWriteHostLo;
+
+ u32 pad1[2];
+
+ u32 DmaReadHostHi;
+ u32 DmaReadHostLo;
+
+ u32 pad2;
+
+ u32 DmaReadLen;
+ u32 DmaWriteState;
+
+ u32 DmaWriteLcl;
+ u32 DmaWriteIPchecksum;
+ u32 DmaWriteLen;
+ u32 DmaReadState;
+ u32 DmaReadLcl;
+ u32 DmaReadIPchecksum;
+ u32 pad3;
+
+ u32 RxBase;
+ u32 RxPrd;
+ u32 RxCon;
+
+ u32 pad4;
+
+ u32 TxBase;
+ u32 TxPrd;
+ u32 TxCon;
+
+ u32 pad5;
+
+ u32 RxIndPro;
+ u32 RxIndCon;
+ u32 RxIndRef;
+
+ u32 pad6;
+
+ u32 TxIndPro;
+ u32 TxIndCon;
+ u32 TxIndRef;
+
+ u32 pad7[17];
+
+ u32 DrCmndPro;
+ u32 DrCmndCon;
+ u32 DrCmndRef;
+
+ u32 pad8;
+
+ u32 DwCmndPro;
+ u32 DwCmndCon;
+ u32 DwCmndRef;
+
+ u32 AssistState;
+
+ u32 DrDataPro;
+ u32 DrDataCon;
+ u32 DrDataRef;
+
+ u32 pad9;
+
+ u32 DwDataPro;
+ u32 DwDataCon;
+ u32 DwDataRef;
+
+ u32 pad10[33];
+
+ u32 EvtCon;
+
+ u32 pad11[5];
+
+ u32 TxPi;
+ u32 IpRxPi;
+
+ u32 pad11a[8];
+
+ u32 CmdRing[16];
+
+/* The ULA is in two registers the high order two bytes of the first
+ * word contain the RunCode features.
+ * ula0 res res byte0 byte1
+ * ula1 byte2 byte3 byte4 byte5
+ */
+ u32 Ula0;
+ u32 Ula1;
+
+ u32 RxRingHi;
+ u32 RxRingLo;
+
+ u32 InfoPtrHi;
+ u32 InfoPtrLo;
+
+ u32 Mode;
+
+ u32 ConRetry;
+ u32 ConRetryTmr;
+
+ u32 ConTmout;
+ u32 CtatTmr;
+
+ u32 MaxRxRng;
+
+ u32 IntrTmr;
+ u32 TxDataMvTimeout;
+ u32 RxDataMvTimeout;
+
+ u32 EvtPrd;
+ u32 TraceIdx;
+
+ u32 Fail1;
+ u32 Fail2;
+
+ u32 DrvPrm;
+
+ u32 FilterLA;
+
+ u32 FwRev;
+ u32 FwRes1;
+ u32 FwRes2;
+ u32 FwRes3;
+
+ u32 WriteDmaThresh;
+ u32 ReadDmaThresh;
+
+ u32 pad12[325];
+ u32 Window[512];
+};
+
+/*
+ * Host control register bits.
+ */
+
+#define RR_INT 0x01
+#define RR_CLEAR_INT 0x02
+#define NO_SWAP 0x04000004
+#define NO_SWAP1 0x00000004
+#define PCI_RESET_NIC 0x08
+#define HALT_NIC 0x10
+#define SSTEP_NIC 0x20
+#define MEM_READ_MULTI 0x40
+#define NIC_HALTED 0x100
+#define HALT_INST 0x200
+#define PARITY_ERR 0x400
+#define INVALID_INST_B 0x800
+#define RR_REV_2 0x20000000
+#define RR_REV_MASK 0xf0000000
+
+/*
+ * Local control register bits.
+ */
+
+#define INTA_STATE 0x01
+#define CLEAR_INTA 0x02
+#define FAST_EEPROM_ACCESS 0x08
+#define ENABLE_EXTRA_SRAM 0x100
+#define ENABLE_EXTRA_DESC 0x200
+#define ENABLE_PARITY 0x400
+#define FORCE_DMA_PARITY_ERROR 0x800
+#define ENABLE_EEPROM_WRITE 0x1000
+#define ENABLE_DATA_CACHE 0x2000
+#define SRAM_LO_PARITY_ERR 0x4000
+#define SRAM_HI_PARITY_ERR 0x8000
+
+/*
+ * PCI state bits.
+ */
+
+#define FORCE_PCI_RESET 0x01
+#define PROVIDE_LENGTH 0x02
+#define MASK_DMA_READ_MAX 0x1C
+#define RBURST_DISABLE 0x00
+#define RBURST_4 0x04
+#define RBURST_16 0x08
+#define RBURST_32 0x0C
+#define RBURST_64 0x10
+#define RBURST_128 0x14
+#define RBURST_256 0x18
+#define RBURST_1024 0x1C
+#define MASK_DMA_WRITE_MAX 0xE0
+#define WBURST_DISABLE 0x00
+#define WBURST_4 0x20
+#define WBURST_16 0x40
+#define WBURST_32 0x60
+#define WBURST_64 0x80
+#define WBURST_128 0xa0
+#define WBURST_256 0xc0
+#define WBURST_1024 0xe0
+#define MASK_MIN_DMA 0xFF00
+#define FIFO_RETRY_ENABLE 0x10000
+
+/*
+ * Event register
+ */
+
+#define DMA_WRITE_DONE 0x10000
+#define DMA_READ_DONE 0x20000
+#define DMA_WRITE_ERR 0x40000
+#define DMA_READ_ERR 0x80000
+
+/*
+ * Receive state
+ *
+ * RoadRunner HIPPI Receive State Register controls and monitors the
+ * HIPPI receive interface in the NIC. Look at err bits when a HIPPI
+ * receive Error Event occurs.
+ */
+
+#define ENABLE_NEW_CON 0x01
+#define RESET_RECV 0x02
+#define RECV_ALL 0x00
+#define RECV_1K 0x20
+#define RECV_2K 0x40
+#define RECV_4K 0x60
+#define RECV_8K 0x80
+#define RECV_16K 0xa0
+#define RECV_32K 0xc0
+#define RECV_64K 0xe0
+
+/*
+ * Transmit status.
+ */
+
+#define ENA_XMIT 0x01
+#define PERM_CON 0x02
+
+/*
+ * DMA write state
+ */
+
+#define RESET_DMA 0x01
+#define NO_SWAP_DMA 0x02
+#define DMA_ACTIVE 0x04
+#define THRESH_MASK 0x1F
+#define DMA_ERROR_MASK 0xff000000
+
+/*
+ * Gooddies stored in the ULA registers.
+ */
+
+#define TRACE_ON_WHAT_BIT 0x00020000 /* Traces on */
+#define ONEM_BUF_WHAT_BIT 0x00040000 /* 1Meg vs 256K */
+#define CHAR_API_WHAT_BIT 0x00080000 /* Char API vs network only */
+#define CMD_EVT_WHAT_BIT 0x00200000 /* Command event */
+#define LONG_TX_WHAT_BIT 0x00400000
+#define LONG_RX_WHAT_BIT 0x00800000
+#define WHAT_BIT_MASK 0xFFFD0000 /* Feature bit mask */
+
+/*
+ * Mode status
+ */
+
+#define EVENT_OVFL 0x80000000
+#define FATAL_ERR 0x40000000
+#define LOOP_BACK 0x01
+#define MODE_PH 0x02
+#define MODE_FP 0x00
+#define PTR64BIT 0x04
+#define PTR32BIT 0x00
+#define PTR_WD_SWAP 0x08
+#define PTR_WD_NOSWAP 0x00
+#define POST_WARN_EVENT 0x10
+#define ERR_TERM 0x20
+#define DIRECT_CONN 0x40
+#define NO_NIC_WATCHDOG 0x80
+#define SWAP_DATA 0x100
+#define SWAP_CONTROL 0x200
+#define NIC_HALT_ON_ERR 0x400
+#define NIC_NO_RESTART 0x800
+#define HALF_DUP_TX 0x1000
+#define HALF_DUP_RX 0x2000
+
+
+/*
+ * Error codes
+ */
+
+/* Host Error Codes - values of fail1 */
+#define ERR_UNKNOWN_MBOX 0x1001
+#define ERR_UNKNOWN_CMD 0x1002
+#define ERR_MAX_RING 0x1003
+#define ERR_RING_CLOSED 0x1004
+#define ERR_RING_OPEN 0x1005
+/* Firmware internal errors */
+#define ERR_EVENT_RING_FULL 0x01
+#define ERR_DW_PEND_CMND_FULL 0x02
+#define ERR_DR_PEND_CMND_FULL 0x03
+#define ERR_DW_PEND_DATA_FULL 0x04
+#define ERR_DR_PEND_DATA_FULL 0x05
+#define ERR_ILLEGAL_JUMP 0x06
+#define ERR_UNIMPLEMENTED 0x07
+#define ERR_TX_INFO_FULL 0x08
+#define ERR_RX_INFO_FULL 0x09
+#define ERR_ILLEGAL_MODE 0x0A
+#define ERR_MAIN_TIMEOUT 0x0B
+#define ERR_EVENT_BITS 0x0C
+#define ERR_UNPEND_FULL 0x0D
+#define ERR_TIMER_QUEUE_FULL 0x0E
+#define ERR_TIMER_QUEUE_EMPTY 0x0F
+#define ERR_TIMER_NO_FREE 0x10
+#define ERR_INTR_START 0x11
+#define ERR_BAD_STARTUP 0x12
+#define ERR_NO_PKT_END 0x13
+#define ERR_HALTED_ON_ERR 0x14
+/* Hardware NIC Errors */
+#define ERR_WRITE_DMA 0x0101
+#define ERR_READ_DMA 0x0102
+#define ERR_EXT_SERIAL 0x0103
+#define ERR_TX_INT_PARITY 0x0104
+
+
+/*
+ * Event definitions
+ */
+
+#define EVT_RING_ENTRIES 64
+#define EVT_RING_SIZE (EVT_RING_ENTRIES * sizeof(struct event))
+
+struct event {
+#ifdef __LITTLE_ENDIAN
+ u16 index;
+ u8 ring;
+ u8 code;
+#else
+ u8 code;
+ u8 ring;
+ u16 index;
+#endif
+ u32 timestamp;
+};
+
+/*
+ * General Events
+ */
+
+#define E_NIC_UP 0x01
+#define E_WATCHDOG 0x02
+
+#define E_STAT_UPD 0x04
+#define E_INVAL_CMD 0x05
+#define E_SET_CMD_CONS 0x06
+#define E_LINK_ON 0x07
+#define E_LINK_OFF 0x08
+#define E_INTERN_ERR 0x09
+#define E_HOST_ERR 0x0A
+#define E_STATS_UPDATE 0x0B
+#define E_REJECTING 0x0C
+
+/*
+ * Send Events
+ */
+#define E_CON_REJ 0x13
+#define E_CON_TMOUT 0x14
+#define E_CON_NC_TMOUT 0x15 /* I , Connection No Campon Timeout */
+#define E_DISC_ERR 0x16
+#define E_INT_PRTY 0x17
+#define E_TX_IDLE 0x18
+#define E_TX_LINK_DROP 0x19
+#define E_TX_INV_RNG 0x1A
+#define E_TX_INV_BUF 0x1B
+#define E_TX_INV_DSC 0x1C
+
+/*
+ * Destination Events
+ */
+/*
+ * General Receive events
+ */
+#define E_VAL_RNG 0x20
+#define E_RX_RNG_ENER 0x21
+#define E_INV_RNG 0x22
+#define E_RX_RNG_SPC 0x23
+#define E_RX_RNG_OUT 0x24
+#define E_PKT_DISCARD 0x25
+#define E_INFO_EVT 0x27
+
+/*
+ * Data corrupted events
+ */
+#define E_RX_PAR_ERR 0x2B
+#define E_RX_LLRC_ERR 0x2C
+#define E_IP_CKSM_ERR 0x2D
+#define E_DTA_CKSM_ERR 0x2E
+#define E_SHT_BST 0x2F
+
+/*
+ * Data lost events
+ */
+#define E_LST_LNK_ERR 0x30
+#define E_FLG_SYN_ERR 0x31
+#define E_FRM_ERR 0x32
+#define E_RX_IDLE 0x33
+#define E_PKT_LN_ERR 0x34
+#define E_STATE_ERR 0x35
+#define E_UNEXP_DATA 0x3C
+
+/*
+ * Fatal events
+ */
+#define E_RX_INV_BUF 0x36
+#define E_RX_INV_DSC 0x37
+#define E_RNG_BLK 0x38
+
+/*
+ * Warning events
+ */
+#define E_RX_TO 0x39
+#define E_BFR_SPC 0x3A
+#define E_INV_ULP 0x3B
+
+#define E_NOT_IMPLEMENTED 0x40
+
+
+/*
+ * Commands
+ */
+
+#define CMD_RING_ENTRIES 16
+
+struct cmd {
+#ifdef __LITTLE_ENDIAN
+ u16 index;
+ u8 ring;
+ u8 code;
+#else
+ u8 code;
+ u8 ring;
+ u16 index;
+#endif
+};
+
+#define C_START_FW 0x01
+#define C_UPD_STAT 0x02
+#define C_WATCHDOG 0x05
+#define C_DEL_RNG 0x09
+#define C_NEW_RNG 0x0A
+#define C_CONN 0x0D
+
+
+/*
+ * Mode bits
+ */
+
+#define PACKET_BAD 0x01 /* Packet had link-layer error */
+#define INTERRUPT 0x02
+#define TX_IP_CKSUM 0x04
+#define PACKET_END 0x08
+#define PACKET_START 0x10
+#define SAME_IFIELD 0x80
+
+
+typedef struct {
+#if (BITS_PER_LONG == 64)
+ u64 addrlo;
+#else
+ u32 addrhi;
+ u32 addrlo;
+#endif
+} rraddr;
+
+
+static inline void set_rraddr(rraddr *ra, dma_addr_t addr)
+{
+ unsigned long baddr = addr;
+#if (BITS_PER_LONG == 64)
+ ra->addrlo = baddr;
+#else
+ /* Don't bother setting zero every time */
+ ra->addrlo = baddr;
+#endif
+ mb();
+}
+
+
+static inline void set_rxaddr(struct rr_regs __iomem *regs, volatile dma_addr_t addr)
+{
+ unsigned long baddr = addr;
+#if (BITS_PER_LONG == 64) && defined(__LITTLE_ENDIAN)
+ writel(baddr & 0xffffffff, &regs->RxRingHi);
+ writel(baddr >> 32, &regs->RxRingLo);
+#elif (BITS_PER_LONG == 64)
+ writel(baddr >> 32, &regs->RxRingHi);
+ writel(baddr & 0xffffffff, &regs->RxRingLo);
+#else
+ writel(0, &regs->RxRingHi);
+ writel(baddr, &regs->RxRingLo);
+#endif
+ mb();
+}
+
+
+static inline void set_infoaddr(struct rr_regs __iomem *regs, volatile dma_addr_t addr)
+{
+ unsigned long baddr = addr;
+#if (BITS_PER_LONG == 64) && defined(__LITTLE_ENDIAN)
+ writel(baddr & 0xffffffff, &regs->InfoPtrHi);
+ writel(baddr >> 32, &regs->InfoPtrLo);
+#elif (BITS_PER_LONG == 64)
+ writel(baddr >> 32, &regs->InfoPtrHi);
+ writel(baddr & 0xffffffff, &regs->InfoPtrLo);
+#else
+ writel(0, &regs->InfoPtrHi);
+ writel(baddr, &regs->InfoPtrLo);
+#endif
+ mb();
+}
+
+
+/*
+ * TX ring
+ */
+
+#ifdef CONFIG_ROADRUNNER_LARGE_RINGS
+#define TX_RING_ENTRIES 32
+#else
+#define TX_RING_ENTRIES 16
+#endif
+#define TX_TOTAL_SIZE (TX_RING_ENTRIES * sizeof(struct tx_desc))
+
+struct tx_desc{
+ rraddr addr;
+ u32 res;
+#ifdef __LITTLE_ENDIAN
+ u16 size;
+ u8 pad;
+ u8 mode;
+#else
+ u8 mode;
+ u8 pad;
+ u16 size;
+#endif
+};
+
+
+#ifdef CONFIG_ROADRUNNER_LARGE_RINGS
+#define RX_RING_ENTRIES 32
+#else
+#define RX_RING_ENTRIES 16
+#endif
+#define RX_TOTAL_SIZE (RX_RING_ENTRIES * sizeof(struct rx_desc))
+
+struct rx_desc{
+ rraddr addr;
+ u32 res;
+#ifdef __LITTLE_ENDIAN
+ u16 size;
+ u8 pad;
+ u8 mode;
+#else
+ u8 mode;
+ u8 pad;
+ u16 size;
+#endif
+};
+
+
+/*
+ * ioctl's
+ */
+
+#define SIOCRRPFW SIOCDEVPRIVATE /* put firmware */
+#define SIOCRRGFW SIOCDEVPRIVATE+1 /* get firmware */
+#define SIOCRRID SIOCDEVPRIVATE+2 /* identify */
+
+
+struct seg_hdr {
+ u32 seg_start;
+ u32 seg_len;
+ u32 seg_eestart;
+};
+
+
+#define EEPROM_BASE 0x80000000
+#define EEPROM_WORDS 8192
+#define EEPROM_BYTES (EEPROM_WORDS * sizeof(u32))
+
+struct eeprom_boot {
+ u32 key1;
+ u32 key2;
+ u32 sram_size;
+ struct seg_hdr loader;
+ u32 init_chksum;
+ u32 reserved1;
+};
+
+struct eeprom_manf {
+ u32 HeaderFmt;
+ u32 Firmware;
+ u32 BoardRevision;
+ u32 RoadrunnerRev;
+ char OpticsPart[8];
+ u32 OpticsRev;
+ u32 pad1;
+ char SramPart[8];
+ u32 SramRev;
+ u32 pad2;
+ char EepromPart[8];
+ u32 EepromRev;
+ u32 EepromSize;
+ char PalPart[8];
+ u32 PalRev;
+ u32 pad3;
+ char PalCodeFile[12];
+ u32 PalCodeRev;
+ char BoardULA[8];
+ char SerialNo[8];
+ char MfgDate[8];
+ char MfgTime[8];
+ char ModifyDate[8];
+ u32 ModCount;
+ u32 pad4[13];
+};
+
+
+struct eeprom_phase_info {
+ char phase1File[12];
+ u32 phase1Rev;
+ char phase1Date[8];
+ char phase2File[12];
+ u32 phase2Rev;
+ char phase2Date[8];
+ u32 reserved7[4];
+};
+
+struct eeprom_rncd_info {
+ u32 FwStart;
+ u32 FwRev;
+ char FwDate[8];
+ u32 AddrRunCodeSegs;
+ u32 FileNames;
+ char File[13][8];
+};
+
+
+/* Phase 1 region (starts are word offset 0x80) */
+struct phase1_hdr{
+ u32 jump;
+ u32 noop;
+ struct seg_hdr phase2Seg;
+};
+
+struct eeprom {
+ struct eeprom_boot boot;
+ u32 pad1[8];
+ struct eeprom_manf manf;
+ struct eeprom_phase_info phase_info;
+ struct eeprom_rncd_info rncd_info;
+ u32 pad2[15];
+ u32 hdr_checksum;
+ struct phase1_hdr phase1;
+};
+
+
+struct rr_stats {
+ u32 NicTimeStamp;
+ u32 RngCreated;
+ u32 RngDeleted;
+ u32 IntrGen;
+ u32 NEvtOvfl;
+ u32 InvCmd;
+ u32 DmaReadErrs;
+ u32 DmaWriteErrs;
+ u32 StatUpdtT;
+ u32 StatUpdtC;
+ u32 WatchDog;
+ u32 Trace;
+
+ /* Serial HIPPI */
+ u32 LnkRdyEst;
+ u32 GLinkErr;
+ u32 AltFlgErr;
+ u32 OvhdBit8Sync;
+ u32 RmtSerPrtyErr;
+ u32 RmtParPrtyErr;
+ u32 RmtLoopBk;
+ u32 pad1;
+
+ /* HIPPI tx */
+ u32 ConEst;
+ u32 ConRejS;
+ u32 ConRetry;
+ u32 ConTmOut;
+ u32 SndConDiscon;
+ u32 SndParErr;
+ u32 PktSnt;
+ u32 pad2[2];
+ u32 ShFBstSnt;
+ u64 BytSent;
+ u32 TxTimeout;
+ u32 pad3[3];
+
+ /* HIPPI rx */
+ u32 ConAcc;
+ u32 ConRejdiPrty;
+ u32 ConRejd64b;
+ u32 ConRejdBuf;
+ u32 RxConDiscon;
+ u32 RxConNoData;
+ u32 PktRx;
+ u32 pad4[2];
+ u32 ShFBstRx;
+ u64 BytRx;
+ u32 RxParErr;
+ u32 RxLLRCerr;
+ u32 RxBstSZerr;
+ u32 RxStateErr;
+ u32 RxRdyErr;
+ u32 RxInvULP;
+ u32 RxSpcBuf;
+ u32 RxSpcDesc;
+ u32 RxRngSpc;
+ u32 RxRngFull;
+ u32 RxPktLenErr;
+ u32 RxCksmErr;
+ u32 RxPktDrp;
+ u32 RngLowSpc;
+ u32 RngDataClose;
+ u32 RxTimeout;
+ u32 RxIdle;
+};
+
+
+/*
+ * This struct is shared with the NIC firmware.
+ */
+struct ring_ctrl {
+ rraddr rngptr;
+#ifdef __LITTLE_ENDIAN
+ u16 entries;
+ u8 pad;
+ u8 entry_size;
+ u16 pi;
+ u16 mode;
+#else
+ u8 entry_size;
+ u8 pad;
+ u16 entries;
+ u16 mode;
+ u16 pi;
+#endif
+};
+
+struct rr_info {
+ union {
+ struct rr_stats stats;
+ u32 stati[128];
+ } s;
+ struct ring_ctrl evt_ctrl;
+ struct ring_ctrl cmd_ctrl;
+ struct ring_ctrl tx_ctrl;
+ u8 pad[464];
+ u8 trace[3072];
+};
+
+/*
+ * The linux structure for the RoadRunner.
+ *
+ * RX/TX descriptors are put first to make sure they are properly
+ * aligned and do not cross cache-line boundaries.
+ */
+
+struct rr_private
+{
+ struct rx_desc *rx_ring;
+ struct tx_desc *tx_ring;
+ struct event *evt_ring;
+ dma_addr_t tx_ring_dma;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t evt_ring_dma;
+ /* Alignment ok ? */
+ struct sk_buff *rx_skbuff[RX_RING_ENTRIES];
+ struct sk_buff *tx_skbuff[TX_RING_ENTRIES];
+ struct rr_regs __iomem *regs; /* Register base */
+ struct ring_ctrl *rx_ctrl; /* Receive ring control */
+ struct rr_info *info; /* Shared info page */
+ dma_addr_t rx_ctrl_dma;
+ dma_addr_t info_dma;
+ spinlock_t lock;
+ struct timer_list timer;
+ u32 cur_rx, cur_cmd, cur_evt;
+ u32 dirty_rx, dirty_tx;
+ u32 tx_full;
+ u32 fw_rev;
+ volatile short fw_running;
+ struct pci_dev *pci_dev;
+};
+
+
+/*
+ * Prototypes
+ */
+static int rr_init(struct net_device *dev);
+static int rr_init1(struct net_device *dev);
+static irqreturn_t rr_interrupt(int irq, void *dev_id);
+
+static int rr_open(struct net_device *dev);
+static netdev_tx_t rr_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static int rr_close(struct net_device *dev);
+static int rr_siocdevprivate(struct net_device *dev, struct ifreq *rq,
+ void __user *data, int cmd);
+static unsigned int rr_read_eeprom(struct rr_private *rrpriv,
+ unsigned long offset,
+ unsigned char *buf,
+ unsigned long length);
+static u32 rr_read_eeprom_word(struct rr_private *rrpriv, size_t offset);
+static int rr_load_firmware(struct net_device *dev);
+static inline void rr_raz_tx(struct rr_private *, struct net_device *);
+static inline void rr_raz_rx(struct rr_private *, struct net_device *);
+#endif /* _RRUNNER_H_ */