Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1475 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
new file mode 100644
index 000000000..8a43c48ec
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -0,0 +1,1475 @@
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sd.h>
+#include "hif.h"
+#include "hif-ops.h"
+#include "target.h"
+#include "debug.h"
+#include "cfg80211.h"
+#include "trace.h"
+
+struct ath6kl_sdio {
+	struct sdio_func *func;
+
+	/* protects access to bus_req_freeq */
+	spinlock_t lock;
+
+	/* free list */
+	struct list_head bus_req_freeq;
+
+	/* available bus requests */
+	struct bus_request bus_req[BUS_REQUEST_MAX_NUM];
+
+	struct ath6kl *ar;
+
+	u8 *dma_buffer;
+
+	/* protects access to dma_buffer */
+	struct mutex dma_buffer_mutex;
+
+	/* scatter request list head */
+	struct list_head scat_req;
+
+	atomic_t irq_handling;
+	wait_queue_head_t irq_wq;
+
+	/* protects access to scat_req */
+	spinlock_t scat_lock;
+
+	bool scatter_enabled;
+
+	bool is_disabled;
+	const struct sdio_device_id *id;
+	struct work_struct wr_async_work;
+	struct list_head wr_asyncq;
+
+	/* protects access to wr_asyncq */
+	spinlock_t wr_async_lock;
+};
+
+#define CMD53_ARG_READ          0
+#define CMD53_ARG_WRITE         1
+#define CMD53_ARG_BLOCK_BASIS   1
+#define CMD53_ARG_FIXED_ADDRESS 0
+#define CMD53_ARG_INCR_ADDRESS  1
+
+static int ath6kl_sdio_config(struct ath6kl *ar);
+
+static inline struct ath6kl_sdio *ath6kl_sdio_priv(struct ath6kl *ar)
+{
+	return ar->hif_priv;
+}
+
+/*
+ * Macro to check if DMA buffer is WORD-aligned and DMA-able.
+ * Most host controllers assume the buffer is DMA'able and will
+ * bug-check otherwise (i.e. buffers on the stack). virt_addr_valid
+ * check fails on stack memory.
+ */
+static inline bool buf_needs_bounce(u8 *buf)
+{
+	return ((unsigned long) buf & 0x3) || !virt_addr_valid(buf);
+}
+
+static void ath6kl_sdio_set_mbox_info(struct ath6kl *ar)
+{
+	struct ath6kl_mbox_info *mbox_info = &ar->mbox_info;
+
+	/* EP1 has an extended range */
+	mbox_info->htc_addr = HIF_MBOX_BASE_ADDR;
+	mbox_info->htc_ext_addr = HIF_MBOX0_EXT_BASE_ADDR;
+	mbox_info->htc_ext_sz = HIF_MBOX0_EXT_WIDTH;
+	mbox_info->block_size = HIF_MBOX_BLOCK_SIZE;
+	mbox_info->gmbox_addr = HIF_GMBOX_BASE_ADDR;
+	mbox_info->gmbox_sz = HIF_GMBOX_WIDTH;
+}
+
+static inline void ath6kl_sdio_set_cmd53_arg(u32 *arg, u8 rw, u8 func,
+					     u8 mode, u8 opcode, u32 addr,
+					     u16 blksz)
+{
+	*arg = (((rw & 1) << 31) |
+		((func & 0x7) << 28) |
+		((mode & 1) << 27) |
+		((opcode & 1) << 26) |
+		((addr & 0x1FFFF) << 9) |
+		(blksz & 0x1FF));
+}
+
+static inline void ath6kl_sdio_set_cmd52_arg(u32 *arg, u8 write, u8 raw,
+					     unsigned int address,
+					     unsigned char val)
+{
+	const u8 func = 0;
+
+	*arg = ((write & 1) << 31) |
+	       ((func & 0x7) << 28) |
+	       ((raw & 1) << 27) |
+	       (1 << 26) |
+	       ((address & 0x1FFFF) << 9) |
+	       (1 << 8) |
+	       (val & 0xFF);
+}
+
+static int ath6kl_sdio_func0_cmd52_wr_byte(struct mmc_card *card,
+					   unsigned int address,
+					   unsigned char byte)
+{
+	struct mmc_command io_cmd;
+
+	memset(&io_cmd, 0, sizeof(io_cmd));
+	ath6kl_sdio_set_cmd52_arg(&io_cmd.arg, 1, 0, address, byte);
+	io_cmd.opcode = SD_IO_RW_DIRECT;
+	io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+	return mmc_wait_for_cmd(card->host, &io_cmd, 0);
+}
+
+static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr,
+			  u8 *buf, u32 len)
+{
+	int ret = 0;
+
+	sdio_claim_host(func);
+
+	if (request & HIF_WRITE) {
+		/* FIXME: looks like ugly workaround for something */
+		if (addr >= HIF_MBOX_BASE_ADDR &&
+		    addr <= HIF_MBOX_END_ADDR)
+			addr += (HIF_MBOX_WIDTH - len);
+
+		/* FIXME: this also looks like ugly workaround */
+		if (addr == HIF_MBOX0_EXT_BASE_ADDR)
+			addr += HIF_MBOX0_EXT_WIDTH - len;
+
+		if (request & HIF_FIXED_ADDRESS)
+			ret = sdio_writesb(func, addr, buf, len);
+		else
+			ret = sdio_memcpy_toio(func, addr, buf, len);
+	} else {
+		if (request & HIF_FIXED_ADDRESS)
+			ret = sdio_readsb(func, buf, addr, len);
+		else
+			ret = sdio_memcpy_fromio(func, buf, addr, len);
+	}
+
+	sdio_release_host(func);
+
+	ath6kl_dbg(ATH6KL_DBG_SDIO, "%s addr 0x%x%s buf 0x%p len %d\n",
+		   request & HIF_WRITE ? "wr" : "rd", addr,
+		   request & HIF_FIXED_ADDRESS ? " (fixed)" : "", buf, len);
+	ath6kl_dbg_dump(ATH6KL_DBG_SDIO_DUMP, NULL, "sdio ", buf, len);
+
+	trace_ath6kl_sdio(addr, request, buf, len);
+
+	return ret;
+}
+
+static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio)
+{
+	struct bus_request *bus_req;
+
+	spin_lock_bh(&ar_sdio->lock);
+
+	if (list_empty(&ar_sdio->bus_req_freeq)) {
+		spin_unlock_bh(&ar_sdio->lock);
+		return NULL;
+	}
+
+	bus_req = list_first_entry(&ar_sdio->bus_req_freeq,
+				   struct bus_request, list);
+	list_del(&bus_req->list);
+
+	spin_unlock_bh(&ar_sdio->lock);
+	ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n",
+		   __func__, bus_req);
+
+	return bus_req;
+}
+
+static void ath6kl_sdio_free_bus_req(struct ath6kl_sdio *ar_sdio,
+				     struct bus_request *bus_req)
+{
+	ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n",
+		   __func__, bus_req);
+
+	spin_lock_bh(&ar_sdio->lock);
+	list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq);
+	spin_unlock_bh(&ar_sdio->lock);
+}
+
+static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req,
+					struct mmc_data *data)
+{
+	struct scatterlist *sg;
+	int i;
+
+	data->blksz = HIF_MBOX_BLOCK_SIZE;
+	data->blocks = scat_req->len / HIF_MBOX_BLOCK_SIZE;
+
+	ath6kl_dbg(ATH6KL_DBG_SCATTER,
+		   "hif-scatter: (%s) addr: 0x%X, (block len: %d, block count: %d) , (tot:%d,sg:%d)\n",
+		   (scat_req->req & HIF_WRITE) ? "WR" : "RD", scat_req->addr,
+		   data->blksz, data->blocks, scat_req->len,
+		   scat_req->scat_entries);
+
+	data->flags = (scat_req->req & HIF_WRITE) ? MMC_DATA_WRITE :
+						    MMC_DATA_READ;
+
+	/* fill SG entries */
+	sg = scat_req->sgentries;
+	sg_init_table(sg, scat_req->scat_entries);
+
+	/* assemble SG list */
+	for (i = 0; i < scat_req->scat_entries; i++, sg++) {
+		ath6kl_dbg(ATH6KL_DBG_SCATTER, "%d: addr:0x%p, len:%d\n",
+			   i, scat_req->scat_list[i].buf,
+			   scat_req->scat_list[i].len);
+
+		sg_set_buf(sg, scat_req->scat_list[i].buf,
+			   scat_req->scat_list[i].len);
+	}
+
+	/* set scatter-gather table for request */
+	data->sg = scat_req->sgentries;
+	data->sg_len = scat_req->scat_entries;
+}
+
+static int ath6kl_sdio_scat_rw(struct ath6kl_sdio *ar_sdio,
+			       struct bus_request *req)
+{
+	struct mmc_request mmc_req;
+	struct mmc_command cmd;
+	struct mmc_data data;
+	struct hif_scatter_req *scat_req;
+	u8 opcode, rw;
+	int status, len;
+
+	scat_req = req->scat_req;
+
+	if (scat_req->virt_scat) {
+		len = scat_req->len;
+		if (scat_req->req & HIF_BLOCK_BASIS)
+			len = round_down(len, HIF_MBOX_BLOCK_SIZE);
+
+		status = ath6kl_sdio_io(ar_sdio->func, scat_req->req,
+					scat_req->addr, scat_req->virt_dma_buf,
+					len);
+		goto scat_complete;
+	}
+
+	memset(&mmc_req, 0, sizeof(struct mmc_request));
+	memset(&cmd, 0, sizeof(struct mmc_command));
+	memset(&data, 0, sizeof(struct mmc_data));
+
+	ath6kl_sdio_setup_scat_data(scat_req, &data);
+
+	opcode = (scat_req->req & HIF_FIXED_ADDRESS) ?
+		  CMD53_ARG_FIXED_ADDRESS : CMD53_ARG_INCR_ADDRESS;
+
+	rw = (scat_req->req & HIF_WRITE) ? CMD53_ARG_WRITE : CMD53_ARG_READ;
+
+	/* Fixup the address so that the last byte will fall on MBOX EOM */
+	if (scat_req->req & HIF_WRITE) {
+		if (scat_req->addr == HIF_MBOX_BASE_ADDR)
+			scat_req->addr += HIF_MBOX_WIDTH - scat_req->len;
+		else
+			/* Uses extended address range */
+			scat_req->addr += HIF_MBOX0_EXT_WIDTH - scat_req->len;
+	}
+
+	/* set command argument */
+	ath6kl_sdio_set_cmd53_arg(&cmd.arg, rw, ar_sdio->func->num,
+				  CMD53_ARG_BLOCK_BASIS, opcode, scat_req->addr,
+				  data.blocks);
+
+	cmd.opcode = SD_IO_RW_EXTENDED;
+	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
+
+	mmc_req.cmd = &cmd;
+	mmc_req.data = &data;
+
+	sdio_claim_host(ar_sdio->func);
+
+	mmc_set_data_timeout(&data, ar_sdio->func->card);
+
+	trace_ath6kl_sdio_scat(scat_req->addr,
+			       scat_req->req,
+			       scat_req->len,
+			       scat_req->scat_entries,
+			       scat_req->scat_list);
+
+	/* synchronous call to process request */
+	mmc_wait_for_req(ar_sdio->func->card->host, &mmc_req);
+
+	sdio_release_host(ar_sdio->func);
+
+	status = cmd.error ? cmd.error : data.error;
+
+scat_complete:
+	scat_req->status = status;
+
+	if (scat_req->status)
+		ath6kl_err("Scatter write request failed:%d\n",
+			   scat_req->status);
+
+	if (scat_req->req & HIF_ASYNCHRONOUS)
+		scat_req->complete(ar_sdio->ar->htc_target, scat_req);
+
+	return status;
+}
+
+static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio,
+					   int n_scat_entry, int n_scat_req,
+					   bool virt_scat)
+{
+	struct hif_scatter_req *s_req;
+	struct bus_request *bus_req;
+	int i, scat_req_sz, scat_list_sz, size;
+	u8 *virt_buf;
+
+	scat_list_sz = n_scat_entry * sizeof(struct hif_scatter_item);
+	scat_req_sz = sizeof(*s_req) + scat_list_sz;
+
+	if (!virt_scat)
+		size = sizeof(struct scatterlist) * n_scat_entry;
+	else
+		size =  2 * L1_CACHE_BYTES +
+			ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
+
+	for (i = 0; i < n_scat_req; i++) {
+		/* allocate the scatter request */
+		s_req = kzalloc(scat_req_sz, GFP_KERNEL);
+		if (!s_req)
+			return -ENOMEM;
+
+		if (virt_scat) {
+			virt_buf = kzalloc(size, GFP_KERNEL);
+			if (!virt_buf) {
+				kfree(s_req);
+				return -ENOMEM;
+			}
+
+			s_req->virt_dma_buf =
+				(u8 *)L1_CACHE_ALIGN((unsigned long)virt_buf);
+		} else {
+			/* allocate sglist */
+			s_req->sgentries = kzalloc(size, GFP_KERNEL);
+
+			if (!s_req->sgentries) {
+				kfree(s_req);
+				return -ENOMEM;
+			}
+		}
+
+		/* allocate a bus request for this scatter request */
+		bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
+		if (!bus_req) {
+			kfree(s_req->sgentries);
+			kfree(s_req->virt_dma_buf);
+			kfree(s_req);
+			return -ENOMEM;
+		}
+
+		/* assign the scatter request to this bus request */
+		bus_req->scat_req = s_req;
+		s_req->busrequest = bus_req;
+
+		s_req->virt_scat = virt_scat;
+
+		/* add it to the scatter pool */
+		hif_scatter_req_add(ar_sdio->ar, s_req);
+	}
+
+	return 0;
+}
+
+static int ath6kl_sdio_read_write_sync(struct ath6kl *ar, u32 addr, u8 *buf,
+				       u32 len, u32 request)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	u8  *tbuf = NULL;
+	int ret;
+	bool bounced = false;
+
+	if (request & HIF_BLOCK_BASIS)
+		len = round_down(len, HIF_MBOX_BLOCK_SIZE);
+
+	if (buf_needs_bounce(buf)) {
+		if (!ar_sdio->dma_buffer)
+			return -ENOMEM;
+		mutex_lock(&ar_sdio->dma_buffer_mutex);
+		tbuf = ar_sdio->dma_buffer;
+
+		if (request & HIF_WRITE)
+			memcpy(tbuf, buf, len);
+
+		bounced = true;
+	} else {
+		tbuf = buf;
+	}
+
+	ret = ath6kl_sdio_io(ar_sdio->func, request, addr, tbuf, len);
+	if ((request & HIF_READ) && bounced)
+		memcpy(buf, tbuf, len);
+
+	if (bounced)
+		mutex_unlock(&ar_sdio->dma_buffer_mutex);
+
+	return ret;
+}
+
+static void __ath6kl_sdio_write_async(struct ath6kl_sdio *ar_sdio,
+				      struct bus_request *req)
+{
+	if (req->scat_req) {
+		ath6kl_sdio_scat_rw(ar_sdio, req);
+	} else {
+		void *context;
+		int status;
+
+		status = ath6kl_sdio_read_write_sync(ar_sdio->ar, req->address,
+						     req->buffer, req->length,
+						     req->request);
+		context = req->packet;
+		ath6kl_sdio_free_bus_req(ar_sdio, req);
+		ath6kl_hif_rw_comp_handler(context, status);
+	}
+}
+
+static void ath6kl_sdio_write_async_work(struct work_struct *work)
+{
+	struct ath6kl_sdio *ar_sdio;
+	struct bus_request *req, *tmp_req;
+
+	ar_sdio = container_of(work, struct ath6kl_sdio, wr_async_work);
+
+	spin_lock_bh(&ar_sdio->wr_async_lock);
+	list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
+		list_del(&req->list);
+		spin_unlock_bh(&ar_sdio->wr_async_lock);
+		__ath6kl_sdio_write_async(ar_sdio, req);
+		spin_lock_bh(&ar_sdio->wr_async_lock);
+	}
+	spin_unlock_bh(&ar_sdio->wr_async_lock);
+}
+
+static void ath6kl_sdio_irq_handler(struct sdio_func *func)
+{
+	int status;
+	struct ath6kl_sdio *ar_sdio;
+
+	ath6kl_dbg(ATH6KL_DBG_SDIO, "irq\n");
+
+	ar_sdio = sdio_get_drvdata(func);
+	atomic_set(&ar_sdio->irq_handling, 1);
+	/*
+	 * Release the host during interrups so we can pick it back up when
+	 * we process commands.
+	 */
+	sdio_release_host(ar_sdio->func);
+
+	status = ath6kl_hif_intr_bh_handler(ar_sdio->ar);
+	sdio_claim_host(ar_sdio->func);
+
+	atomic_set(&ar_sdio->irq_handling, 0);
+	wake_up(&ar_sdio->irq_wq);
+
+	WARN_ON(status && status != -ECANCELED);
+}
+
+static int ath6kl_sdio_power_on(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct sdio_func *func = ar_sdio->func;
+	int ret = 0;
+
+	if (!ar_sdio->is_disabled)
+		return 0;
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power on\n");
+
+	sdio_claim_host(func);
+
+	ret = sdio_enable_func(func);
+	if (ret) {
+		ath6kl_err("Unable to enable sdio func: %d)\n", ret);
+		sdio_release_host(func);
+		return ret;
+	}
+
+	sdio_release_host(func);
+
+	/*
+	 * Wait for hardware to initialise. It should take a lot less than
+	 * 10 ms but let's be conservative here.
+	 */
+	msleep(10);
+
+	ret = ath6kl_sdio_config(ar);
+	if (ret) {
+		ath6kl_err("Failed to config sdio: %d\n", ret);
+		goto out;
+	}
+
+	ar_sdio->is_disabled = false;
+
+out:
+	return ret;
+}
+
+static int ath6kl_sdio_power_off(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	int ret;
+
+	if (ar_sdio->is_disabled)
+		return 0;
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power off\n");
+
+	/* Disable the card */
+	sdio_claim_host(ar_sdio->func);
+	ret = sdio_disable_func(ar_sdio->func);
+	sdio_release_host(ar_sdio->func);
+
+	if (ret)
+		return ret;
+
+	ar_sdio->is_disabled = true;
+
+	return ret;
+}
+
+static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer,
+				   u32 length, u32 request,
+				   struct htc_packet *packet)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct bus_request *bus_req;
+
+	bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
+
+	if (WARN_ON_ONCE(!bus_req))
+		return -ENOMEM;
+
+	bus_req->address = address;
+	bus_req->buffer = buffer;
+	bus_req->length = length;
+	bus_req->request = request;
+	bus_req->packet = packet;
+
+	spin_lock_bh(&ar_sdio->wr_async_lock);
+	list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq);
+	spin_unlock_bh(&ar_sdio->wr_async_lock);
+	queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work);
+
+	return 0;
+}
+
+static void ath6kl_sdio_irq_enable(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	int ret;
+
+	sdio_claim_host(ar_sdio->func);
+
+	/* Register the isr */
+	ret =  sdio_claim_irq(ar_sdio->func, ath6kl_sdio_irq_handler);
+	if (ret)
+		ath6kl_err("Failed to claim sdio irq: %d\n", ret);
+
+	sdio_release_host(ar_sdio->func);
+}
+
+static bool ath6kl_sdio_is_on_irq(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+
+	return !atomic_read(&ar_sdio->irq_handling);
+}
+
+static void ath6kl_sdio_irq_disable(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	int ret;
+
+	sdio_claim_host(ar_sdio->func);
+
+	if (atomic_read(&ar_sdio->irq_handling)) {
+		sdio_release_host(ar_sdio->func);
+
+		ret = wait_event_interruptible(ar_sdio->irq_wq,
+					       ath6kl_sdio_is_on_irq(ar));
+		if (ret)
+			return;
+
+		sdio_claim_host(ar_sdio->func);
+	}
+
+	ret = sdio_release_irq(ar_sdio->func);
+	if (ret)
+		ath6kl_err("Failed to release sdio irq: %d\n", ret);
+
+	sdio_release_host(ar_sdio->func);
+}
+
+static struct hif_scatter_req *ath6kl_sdio_scatter_req_get(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct hif_scatter_req *node = NULL;
+
+	spin_lock_bh(&ar_sdio->scat_lock);
+
+	if (!list_empty(&ar_sdio->scat_req)) {
+		node = list_first_entry(&ar_sdio->scat_req,
+					struct hif_scatter_req, list);
+		list_del(&node->list);
+
+		node->scat_q_depth = get_queue_depth(&ar_sdio->scat_req);
+	}
+
+	spin_unlock_bh(&ar_sdio->scat_lock);
+
+	return node;
+}
+
+static void ath6kl_sdio_scatter_req_add(struct ath6kl *ar,
+					struct hif_scatter_req *s_req)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+
+	spin_lock_bh(&ar_sdio->scat_lock);
+
+	list_add_tail(&s_req->list, &ar_sdio->scat_req);
+
+	spin_unlock_bh(&ar_sdio->scat_lock);
+}
+
+/* scatter gather read write request */
+static int ath6kl_sdio_async_rw_scatter(struct ath6kl *ar,
+					struct hif_scatter_req *scat_req)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	u32 request = scat_req->req;
+	int status = 0;
+
+	if (!scat_req->len)
+		return -EINVAL;
+
+	ath6kl_dbg(ATH6KL_DBG_SCATTER,
+		   "hif-scatter: total len: %d scatter entries: %d\n",
+		   scat_req->len, scat_req->scat_entries);
+
+	if (request & HIF_SYNCHRONOUS) {
+		status = ath6kl_sdio_scat_rw(ar_sdio, scat_req->busrequest);
+	} else {
+		spin_lock_bh(&ar_sdio->wr_async_lock);
+		list_add_tail(&scat_req->busrequest->list, &ar_sdio->wr_asyncq);
+		spin_unlock_bh(&ar_sdio->wr_async_lock);
+		queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work);
+	}
+
+	return status;
+}
+
+/* clean up scatter support */
+static void ath6kl_sdio_cleanup_scatter(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct hif_scatter_req *s_req, *tmp_req;
+
+	/* empty the free list */
+	spin_lock_bh(&ar_sdio->scat_lock);
+	list_for_each_entry_safe(s_req, tmp_req, &ar_sdio->scat_req, list) {
+		list_del(&s_req->list);
+		spin_unlock_bh(&ar_sdio->scat_lock);
+
+		/*
+		 * FIXME: should we also call completion handler with
+		 * ath6kl_hif_rw_comp_handler() with status -ECANCELED so
+		 * that the packet is properly freed?
+		 */
+		if (s_req->busrequest) {
+			s_req->busrequest->scat_req = NULL;
+			ath6kl_sdio_free_bus_req(ar_sdio, s_req->busrequest);
+		}
+		kfree(s_req->virt_dma_buf);
+		kfree(s_req->sgentries);
+		kfree(s_req);
+
+		spin_lock_bh(&ar_sdio->scat_lock);
+	}
+	spin_unlock_bh(&ar_sdio->scat_lock);
+
+	ar_sdio->scatter_enabled = false;
+}
+
+/* setup of HIF scatter resources */
+static int ath6kl_sdio_enable_scatter(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct htc_target *target = ar->htc_target;
+	int ret = 0;
+	bool virt_scat = false;
+
+	if (ar_sdio->scatter_enabled)
+		return 0;
+
+	ar_sdio->scatter_enabled = true;
+
+	/* check if host supports scatter and it meets our requirements */
+	if (ar_sdio->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
+		ath6kl_err("host only supports scatter of :%d entries, need: %d\n",
+			   ar_sdio->func->card->host->max_segs,
+			   MAX_SCATTER_ENTRIES_PER_REQ);
+		virt_scat = true;
+	}
+
+	if (!virt_scat) {
+		ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio,
+				MAX_SCATTER_ENTRIES_PER_REQ,
+				MAX_SCATTER_REQUESTS, virt_scat);
+
+		if (!ret) {
+			ath6kl_dbg(ATH6KL_DBG_BOOT,
+				   "hif-scatter enabled requests %d entries %d\n",
+				   MAX_SCATTER_REQUESTS,
+				   MAX_SCATTER_ENTRIES_PER_REQ);
+
+			target->max_scat_entries = MAX_SCATTER_ENTRIES_PER_REQ;
+			target->max_xfer_szper_scatreq =
+						MAX_SCATTER_REQ_TRANSFER_SIZE;
+		} else {
+			ath6kl_sdio_cleanup_scatter(ar);
+			ath6kl_warn("hif scatter resource setup failed, trying virtual scatter method\n");
+		}
+	}
+
+	if (virt_scat || ret) {
+		ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio,
+				ATH6KL_SCATTER_ENTRIES_PER_REQ,
+				ATH6KL_SCATTER_REQS, virt_scat);
+
+		if (ret) {
+			ath6kl_err("failed to alloc virtual scatter resources !\n");
+			ath6kl_sdio_cleanup_scatter(ar);
+			return ret;
+		}
+
+		ath6kl_dbg(ATH6KL_DBG_BOOT,
+			   "virtual scatter enabled requests %d entries %d\n",
+			   ATH6KL_SCATTER_REQS, ATH6KL_SCATTER_ENTRIES_PER_REQ);
+
+		target->max_scat_entries = ATH6KL_SCATTER_ENTRIES_PER_REQ;
+		target->max_xfer_szper_scatreq =
+					ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
+	}
+
+	return 0;
+}
+
+static int ath6kl_sdio_config(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct sdio_func *func = ar_sdio->func;
+	int ret;
+
+	sdio_claim_host(func);
+
+	if (ar_sdio->id->device >= SDIO_DEVICE_ID_ATHEROS_AR6003_00) {
+		/* enable 4-bit ASYNC interrupt on AR6003 or later */
+		ret = ath6kl_sdio_func0_cmd52_wr_byte(func->card,
+						CCCR_SDIO_IRQ_MODE_REG,
+						SDIO_IRQ_MODE_ASYNC_4BIT_IRQ);
+		if (ret) {
+			ath6kl_err("Failed to enable 4-bit async irq mode %d\n",
+				   ret);
+			goto out;
+		}
+
+		ath6kl_dbg(ATH6KL_DBG_BOOT, "4-bit async irq mode enabled\n");
+	}
+
+	/* give us some time to enable, in ms */
+	func->enable_timeout = 100;
+
+	ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
+	if (ret) {
+		ath6kl_err("Set sdio block size %d failed: %d)\n",
+			   HIF_MBOX_BLOCK_SIZE, ret);
+		goto out;
+	}
+
+out:
+	sdio_release_host(func);
+
+	return ret;
+}
+
+static int ath6kl_set_sdio_pm_caps(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct sdio_func *func = ar_sdio->func;
+	mmc_pm_flag_t flags;
+	int ret;
+
+	flags = sdio_get_host_pm_caps(func);
+
+	ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio suspend pm_caps 0x%x\n", flags);
+
+	if (!(flags & MMC_PM_WAKE_SDIO_IRQ) ||
+	    !(flags & MMC_PM_KEEP_POWER))
+		return -EINVAL;
+
+	ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+	if (ret) {
+		ath6kl_err("set sdio keep pwr flag failed: %d\n", ret);
+		return ret;
+	}
+
+	/* sdio irq wakes up host */
+	ret = sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ);
+	if (ret)
+		ath6kl_err("set sdio wake irq flag failed: %d\n", ret);
+
+	return ret;
+}
+
+static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct sdio_func *func = ar_sdio->func;
+	mmc_pm_flag_t flags;
+	bool try_deepsleep = false;
+	int ret;
+
+	if (ar->suspend_mode == WLAN_POWER_STATE_WOW ||
+	    (!ar->suspend_mode && wow)) {
+		ret = ath6kl_set_sdio_pm_caps(ar);
+		if (ret)
+			goto cut_pwr;
+
+		ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_WOW, wow);
+		if (ret && ret != -ENOTCONN)
+			ath6kl_err("wow suspend failed: %d\n", ret);
+
+		if (ret &&
+		    (!ar->wow_suspend_mode ||
+		     ar->wow_suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP))
+			try_deepsleep = true;
+		else if (ret &&
+			 ar->wow_suspend_mode == WLAN_POWER_STATE_CUT_PWR)
+			goto cut_pwr;
+		if (!ret)
+			return 0;
+	}
+
+	if (ar->suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP ||
+	    !ar->suspend_mode || try_deepsleep) {
+		flags = sdio_get_host_pm_caps(func);
+		if (!(flags & MMC_PM_KEEP_POWER))
+			goto cut_pwr;
+
+		ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+		if (ret)
+			goto cut_pwr;
+
+		/*
+		 * Workaround to support Deep Sleep with MSM, set the host pm
+		 * flag as MMC_PM_WAKE_SDIO_IRQ to allow SDCC deiver to disable
+		 * the sdc2_clock and internally allows MSM to enter
+		 * TCXO shutdown properly.
+		 */
+		if ((flags & MMC_PM_WAKE_SDIO_IRQ)) {
+			ret = sdio_set_host_pm_flags(func,
+						MMC_PM_WAKE_SDIO_IRQ);
+			if (ret)
+				goto cut_pwr;
+		}
+
+		ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_DEEPSLEEP,
+					      NULL);
+		if (ret)
+			goto cut_pwr;
+
+		return 0;
+	}
+
+cut_pwr:
+	if (func->card && func->card->host)
+		func->card->host->pm_flags &= ~MMC_PM_KEEP_POWER;
+
+	return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_CUTPOWER, NULL);
+}
+
+static int ath6kl_sdio_resume(struct ath6kl *ar)
+{
+	switch (ar->state) {
+	case ATH6KL_STATE_OFF:
+	case ATH6KL_STATE_CUTPOWER:
+		ath6kl_dbg(ATH6KL_DBG_SUSPEND,
+			   "sdio resume configuring sdio\n");
+
+		/* need to set sdio settings after power is cut from sdio */
+		ath6kl_sdio_config(ar);
+		break;
+
+	case ATH6KL_STATE_ON:
+		break;
+
+	case ATH6KL_STATE_DEEPSLEEP:
+		break;
+
+	case ATH6KL_STATE_WOW:
+		break;
+
+	case ATH6KL_STATE_SUSPENDING:
+		break;
+
+	case ATH6KL_STATE_RESUMING:
+		break;
+
+	case ATH6KL_STATE_RECOVERY:
+		break;
+	}
+
+	ath6kl_cfg80211_resume(ar);
+
+	return 0;
+}
+
+/* set the window address register (using 4-byte register access ). */
+static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
+{
+	int status;
+	u8 addr_val[4];
+	s32 i;
+
+	/*
+	 * Write bytes 1,2,3 of the register to set the upper address bytes,
+	 * the LSB is written last to initiate the access cycle
+	 */
+
+	for (i = 1; i <= 3; i++) {
+		/*
+		 * Fill the buffer with the address byte value we want to
+		 * hit 4 times.
+		 */
+		memset(addr_val, ((u8 *)&addr)[i], 4);
+
+		/*
+		 * Hit each byte of the register address with a 4-byte
+		 * write operation to the same address, this is a harmless
+		 * operation.
+		 */
+		status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val,
+					     4, HIF_WR_SYNC_BYTE_FIX);
+		if (status)
+			break;
+	}
+
+	if (status) {
+		ath6kl_err("%s: failed to write initial bytes of 0x%x to window reg: 0x%X\n",
+			   __func__, addr, reg_addr);
+		return status;
+	}
+
+	/*
+	 * Write the address register again, this time write the whole
+	 * 4-byte value. The effect here is that the LSB write causes the
+	 * cycle to start, the extra 3 byte write to bytes 1,2,3 has no
+	 * effect since we are writing the same values again
+	 */
+	status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr),
+				     4, HIF_WR_SYNC_BYTE_INC);
+
+	if (status) {
+		ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n",
+			   __func__, addr, reg_addr);
+		return status;
+	}
+
+	return 0;
+}
+
+static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
+{
+	int status;
+
+	/* set window register to start read cycle */
+	status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS,
+					address);
+
+	if (status)
+		return status;
+
+	/* read the data */
+	status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
+				(u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC);
+	if (status) {
+		ath6kl_err("%s: failed to read from window data addr\n",
+			   __func__);
+		return status;
+	}
+
+	return status;
+}
+
+static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address,
+				    __le32 data)
+{
+	int status;
+	u32 val = (__force u32) data;
+
+	/* set write data */
+	status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
+				(u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC);
+	if (status) {
+		ath6kl_err("%s: failed to write 0x%x to window data addr\n",
+			   __func__, data);
+		return status;
+	}
+
+	/* set window register, which starts the write cycle */
+	return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
+				      address);
+}
+
+static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
+{
+	u32 addr;
+	unsigned long timeout;
+	int ret;
+
+	ar->bmi.cmd_credits = 0;
+
+	/* Read the counter register to get the command credits */
+	addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+
+	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+	while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
+		/*
+		 * Hit the credit counter with a 4-byte access, the first byte
+		 * read will hit the counter and cause a decrement, while the
+		 * remaining 3 bytes has no effect. The rationale behind this
+		 * is to make all HIF accesses 4-byte aligned.
+		 */
+		ret = ath6kl_sdio_read_write_sync(ar, addr,
+					 (u8 *)&ar->bmi.cmd_credits, 4,
+					 HIF_RD_SYNC_BYTE_INC);
+		if (ret) {
+			ath6kl_err("Unable to decrement the command credit count register: %d\n",
+				   ret);
+			return ret;
+		}
+
+		/* The counter is only 8 bits.
+		 * Ignore anything in the upper 3 bytes
+		 */
+		ar->bmi.cmd_credits &= 0xFF;
+	}
+
+	if (!ar->bmi.cmd_credits) {
+		ath6kl_err("bmi communication timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
+{
+	unsigned long timeout;
+	u32 rx_word = 0;
+	int ret = 0;
+
+	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+	while ((time_before(jiffies, timeout)) && !rx_word) {
+		ret = ath6kl_sdio_read_write_sync(ar,
+					RX_LOOKAHEAD_VALID_ADDRESS,
+					(u8 *)&rx_word, sizeof(rx_word),
+					HIF_RD_SYNC_BYTE_INC);
+		if (ret) {
+			ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
+			return ret;
+		}
+
+		 /* all we really want is one bit */
+		rx_word &= (1 << ENDPOINT1);
+	}
+
+	if (!rx_word) {
+		ath6kl_err("bmi_recv_buf FIFO empty\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	int ret;
+	u32 addr;
+
+	ret = ath6kl_sdio_bmi_credits(ar);
+	if (ret)
+		return ret;
+
+	addr = ar->mbox_info.htc_addr;
+
+	ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
+					  HIF_WR_SYNC_BYTE_INC);
+	if (ret) {
+		ath6kl_err("unable to send the bmi data to the device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	int ret;
+	u32 addr;
+
+	/*
+	 * During normal bootup, small reads may be required.
+	 * Rather than issue an HIF Read and then wait as the Target
+	 * adds successive bytes to the FIFO, we wait here until
+	 * we know that response data is available.
+	 *
+	 * This allows us to cleanly timeout on an unexpected
+	 * Target failure rather than risk problems at the HIF level.
+	 * In particular, this avoids SDIO timeouts and possibly garbage
+	 * data on some host controllers.  And on an interconnect
+	 * such as Compact Flash (as well as some SDIO masters) which
+	 * does not provide any indication on data timeout, it avoids
+	 * a potential hang or garbage response.
+	 *
+	 * Synchronization is more difficult for reads larger than the
+	 * size of the MBOX FIFO (128B), because the Target is unable
+	 * to push the 129th byte of data until AFTER the Host posts an
+	 * HIF Read and removes some FIFO data.  So for large reads the
+	 * Host proceeds to post an HIF Read BEFORE all the data is
+	 * actually available to read.  Fortunately, large BMI reads do
+	 * not occur in practice -- they're supported for debug/development.
+	 *
+	 * So Host/Target BMI synchronization is divided into these cases:
+	 *  CASE 1: length < 4
+	 *        Should not happen
+	 *
+	 *  CASE 2: 4 <= length <= 128
+	 *        Wait for first 4 bytes to be in FIFO
+	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for
+	 *        a BMI command credit, which indicates that the ENTIRE
+	 *        response is available in the FIFO
+	 *
+	 *  CASE 3: length > 128
+	 *        Wait for the first 4 bytes to be in FIFO
+	 *
+	 * For most uses, a small timeout should be sufficient and we will
+	 * usually see a response quickly; but there may be some unusual
+	 * (debug) cases of BMI_EXECUTE where we want an larger timeout.
+	 * For now, we use an unbounded busy loop while waiting for
+	 * BMI_EXECUTE.
+	 *
+	 * If BMI_EXECUTE ever needs to support longer-latency execution,
+	 * especially in production, this code needs to be enhanced to sleep
+	 * and yield.  Also note that BMI_COMMUNICATION_TIMEOUT is currently
+	 * a function of Host processor speed.
+	 */
+	if (len >= 4) { /* NB: Currently, always true */
+		ret = ath6kl_bmi_get_rx_lkahd(ar);
+		if (ret)
+			return ret;
+	}
+
+	addr = ar->mbox_info.htc_addr;
+	ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
+				  HIF_RD_SYNC_BYTE_INC);
+	if (ret) {
+		ath6kl_err("Unable to read the bmi data from the device: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ath6kl_sdio_stop(struct ath6kl *ar)
+{
+	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+	struct bus_request *req, *tmp_req;
+	void *context;
+
+	/* FIXME: make sure that wq is not queued again */
+
+	cancel_work_sync(&ar_sdio->wr_async_work);
+
+	spin_lock_bh(&ar_sdio->wr_async_lock);
+
+	list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
+		list_del(&req->list);
+
+		if (req->scat_req) {
+			/* this is a scatter gather request */
+			req->scat_req->status = -ECANCELED;
+			req->scat_req->complete(ar_sdio->ar->htc_target,
+						req->scat_req);
+		} else {
+			context = req->packet;
+			ath6kl_sdio_free_bus_req(ar_sdio, req);
+			ath6kl_hif_rw_comp_handler(context, -ECANCELED);
+		}
+	}
+
+	spin_unlock_bh(&ar_sdio->wr_async_lock);
+
+	WARN_ON(get_queue_depth(&ar_sdio->scat_req) != 4);
+}
+
+static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
+	.read_write_sync = ath6kl_sdio_read_write_sync,
+	.write_async = ath6kl_sdio_write_async,
+	.irq_enable = ath6kl_sdio_irq_enable,
+	.irq_disable = ath6kl_sdio_irq_disable,
+	.scatter_req_get = ath6kl_sdio_scatter_req_get,
+	.scatter_req_add = ath6kl_sdio_scatter_req_add,
+	.enable_scatter = ath6kl_sdio_enable_scatter,
+	.scat_req_rw = ath6kl_sdio_async_rw_scatter,
+	.cleanup_scatter = ath6kl_sdio_cleanup_scatter,
+	.suspend = ath6kl_sdio_suspend,
+	.resume = ath6kl_sdio_resume,
+	.diag_read32 = ath6kl_sdio_diag_read32,
+	.diag_write32 = ath6kl_sdio_diag_write32,
+	.bmi_read = ath6kl_sdio_bmi_read,
+	.bmi_write = ath6kl_sdio_bmi_write,
+	.power_on = ath6kl_sdio_power_on,
+	.power_off = ath6kl_sdio_power_off,
+	.stop = ath6kl_sdio_stop,
+};
+
+#ifdef CONFIG_PM_SLEEP
+
+/*
+ * Empty handlers so that mmc subsystem doesn't remove us entirely during
+ * suspend. We instead follow cfg80211 suspend/resume handlers.
+ */
+static int ath6kl_sdio_pm_suspend(struct device *device)
+{
+	ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm suspend\n");
+
+	return 0;
+}
+
+static int ath6kl_sdio_pm_resume(struct device *device)
+{
+	ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm resume\n");
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ath6kl_sdio_pm_ops, ath6kl_sdio_pm_suspend,
+			 ath6kl_sdio_pm_resume);
+
+#define ATH6KL_SDIO_PM_OPS (&ath6kl_sdio_pm_ops)
+
+#else
+
+#define ATH6KL_SDIO_PM_OPS NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+static int ath6kl_sdio_probe(struct sdio_func *func,
+			     const struct sdio_device_id *id)
+{
+	int ret;
+	struct ath6kl_sdio *ar_sdio;
+	struct ath6kl *ar;
+	int count;
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT,
+		   "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
+		   func->num, func->vendor, func->device,
+		   func->max_blksize, func->cur_blksize);
+
+	ar_sdio = kzalloc(sizeof(struct ath6kl_sdio), GFP_KERNEL);
+	if (!ar_sdio)
+		return -ENOMEM;
+
+	ar_sdio->dma_buffer = kzalloc(HIF_DMA_BUFFER_SIZE, GFP_KERNEL);
+	if (!ar_sdio->dma_buffer) {
+		ret = -ENOMEM;
+		goto err_hif;
+	}
+
+	ar_sdio->func = func;
+	sdio_set_drvdata(func, ar_sdio);
+
+	ar_sdio->id = id;
+	ar_sdio->is_disabled = true;
+
+	spin_lock_init(&ar_sdio->lock);
+	spin_lock_init(&ar_sdio->scat_lock);
+	spin_lock_init(&ar_sdio->wr_async_lock);
+	mutex_init(&ar_sdio->dma_buffer_mutex);
+
+	INIT_LIST_HEAD(&ar_sdio->scat_req);
+	INIT_LIST_HEAD(&ar_sdio->bus_req_freeq);
+	INIT_LIST_HEAD(&ar_sdio->wr_asyncq);
+
+	INIT_WORK(&ar_sdio->wr_async_work, ath6kl_sdio_write_async_work);
+
+	init_waitqueue_head(&ar_sdio->irq_wq);
+
+	for (count = 0; count < BUS_REQUEST_MAX_NUM; count++)
+		ath6kl_sdio_free_bus_req(ar_sdio, &ar_sdio->bus_req[count]);
+
+	ar = ath6kl_core_create(&ar_sdio->func->dev);
+	if (!ar) {
+		ath6kl_err("Failed to alloc ath6kl core\n");
+		ret = -ENOMEM;
+		goto err_dma;
+	}
+
+	ar_sdio->ar = ar;
+	ar->hif_type = ATH6KL_HIF_TYPE_SDIO;
+	ar->hif_priv = ar_sdio;
+	ar->hif_ops = &ath6kl_sdio_ops;
+	ar->bmi.max_data_size = 256;
+
+	ath6kl_sdio_set_mbox_info(ar);
+
+	ret = ath6kl_sdio_config(ar);
+	if (ret) {
+		ath6kl_err("Failed to config sdio: %d\n", ret);
+		goto err_core_alloc;
+	}
+
+	ret = ath6kl_core_init(ar, ATH6KL_HTC_TYPE_MBOX);
+	if (ret) {
+		ath6kl_err("Failed to init ath6kl core\n");
+		goto err_core_alloc;
+	}
+
+	return ret;
+
+err_core_alloc:
+	ath6kl_core_destroy(ar_sdio->ar);
+err_dma:
+	kfree(ar_sdio->dma_buffer);
+err_hif:
+	kfree(ar_sdio);
+
+	return ret;
+}
+
+static void ath6kl_sdio_remove(struct sdio_func *func)
+{
+	struct ath6kl_sdio *ar_sdio;
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT,
+		   "sdio removed func %d vendor 0x%x device 0x%x\n",
+		   func->num, func->vendor, func->device);
+
+	ar_sdio = sdio_get_drvdata(func);
+
+	ath6kl_stop_txrx(ar_sdio->ar);
+	cancel_work_sync(&ar_sdio->wr_async_work);
+
+	ath6kl_core_cleanup(ar_sdio->ar);
+	ath6kl_core_destroy(ar_sdio->ar);
+
+	kfree(ar_sdio->dma_buffer);
+	kfree(ar_sdio);
+}
+
+static const struct sdio_device_id ath6kl_sdio_devices[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6003_00)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6003_01)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_00)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_01)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_02)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_18)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_19)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
+
+static struct sdio_driver ath6kl_sdio_driver = {
+	.name = "ath6kl_sdio",
+	.id_table = ath6kl_sdio_devices,
+	.probe = ath6kl_sdio_probe,
+	.remove = ath6kl_sdio_remove,
+	.drv.pm = ATH6KL_SDIO_PM_OPS,
+};
+
+static int __init ath6kl_sdio_init(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&ath6kl_sdio_driver);
+	if (ret)
+		ath6kl_err("sdio driver registration failed: %d\n", ret);
+
+	return ret;
+}
+
+static void __exit ath6kl_sdio_exit(void)
+{
+	sdio_unregister_driver(&ath6kl_sdio_driver);
+}
+
+module_init(ath6kl_sdio_init);
+module_exit(ath6kl_sdio_exit);
+
+MODULE_AUTHOR("Atheros Communications, Inc.");
+MODULE_DESCRIPTION("Driver support for Atheros AR600x SDIO devices");
+MODULE_LICENSE("Dual BSD/GPL");
+
+MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_OTP_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_PATCH_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_0_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_OTP_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_PATCH_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_1_1_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_0_FW_DIR "/" AR6004_HW_1_0_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_0_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_1_FW_DIR "/" AR6004_HW_1_1_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_FW_DIR "/" AR6004_HW_1_2_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_3_FW_DIR "/" AR6004_HW_1_3_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_3_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_3_DEFAULT_BOARD_DATA_FILE);