Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 673 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/devices.c b/drivers/net/wireless/intel/iwlwifi/dvm/devices.c
new file mode 100644
index 000000000..39e40901f
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/devices.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
+ * Copyright (C) 2019 Intel Corporation
+ *****************************************************************************/
+
+#include <linux/units.h>
+
+/*
+ * DVM device-specific data & functions
+ */
+#include "iwl-io.h"
+#include "iwl-prph.h"
+#include "iwl-eeprom-parse.h"
+
+#include "agn.h"
+#include "dev.h"
+#include "commands.h"
+
+
+/*
+ * 1000 series
+ * ===========
+ */
+
+/*
+ * For 1000, use advance thermal throttling critical temperature threshold,
+ * but legacy thermal management implementation for now.
+ * This is for the reason of 1000 uCode using advance thermal throttling API
+ * but not implement ct_kill_exit based on ct_kill exit temperature
+ * so the thermal throttling will still based on legacy thermal throttling
+ * management.
+ * The code here need to be modified once 1000 uCode has the advanced thermal
+ * throttling algorithm in place
+ */
+static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 1000 series */
+static void iwl1000_nic_config(struct iwl_priv *priv)
+{
+	/* Setting digital SVR for 1000 card to 1.32V */
+	/* locking is acquired in iwl_set_bits_mask_prph() function */
+	iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG,
+				APMG_SVR_DIGITAL_VOLTAGE_1_32,
+				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+}
+
+/**
+ * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time
+ * @priv: pointer to iwl_priv data structure
+ * @tsf_bits: number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv,
+					   u16 tsf_bits)
+{
+	return (1 << tsf_bits) - 1;
+}
+
+/**
+ * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time
+ * @priv: pointer to iwl_priv data structure
+ * @tsf_bits: number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv,
+					    u16 tsf_bits)
+{
+	return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
+}
+
+/*
+ * extended beacon time format
+ * time in usec will be changed into a 32-bit value in extended:internal format
+ * the extended part is the beacon counts
+ * the internal part is the time in usec within one beacon interval
+ */
+static u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec,
+				u32 beacon_interval)
+{
+	u32 quot;
+	u32 rem;
+	u32 interval = beacon_interval * TIME_UNIT;
+
+	if (!interval || !usec)
+		return 0;
+
+	quot = (usec / interval) &
+		(iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >>
+		IWLAGN_EXT_BEACON_TIME_POS);
+	rem = (usec % interval) & iwl_beacon_time_mask_low(priv,
+				   IWLAGN_EXT_BEACON_TIME_POS);
+
+	return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem;
+}
+
+/* base is usually what we get from ucode with each received frame,
+ * the same as HW timer counter counting down
+ */
+static __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
+			   u32 addon, u32 beacon_interval)
+{
+	u32 base_low = base & iwl_beacon_time_mask_low(priv,
+				IWLAGN_EXT_BEACON_TIME_POS);
+	u32 addon_low = addon & iwl_beacon_time_mask_low(priv,
+				IWLAGN_EXT_BEACON_TIME_POS);
+	u32 interval = beacon_interval * TIME_UNIT;
+	u32 res = (base & iwl_beacon_time_mask_high(priv,
+				IWLAGN_EXT_BEACON_TIME_POS)) +
+				(addon & iwl_beacon_time_mask_high(priv,
+				IWLAGN_EXT_BEACON_TIME_POS));
+
+	if (base_low > addon_low)
+		res += base_low - addon_low;
+	else if (base_low < addon_low) {
+		res += interval + base_low - addon_low;
+		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
+	} else
+		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
+
+	return cpu_to_le32(res);
+}
+
+static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
+	.min_nrg_cck = 95,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 120,
+	.auto_corr_min_ofdm_mrc_x1 = 240,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 155,
+	.auto_corr_max_ofdm_mrc_x1 = 290,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl1000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl1000_sensitivity;
+}
+
+const struct iwl_dvm_cfg iwl_dvm_1000_cfg = {
+	.set_hw_params = iwl1000_hw_set_hw_params,
+	.nic_config = iwl1000_nic_config,
+	.temperature = iwlagn_temperature,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+};
+
+
+/*
+ * 2000 series
+ * ===========
+ */
+
+static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 2000 series */
+static void iwl2000_nic_config(struct iwl_priv *priv)
+{
+	iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+		    CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
+}
+
+static const struct iwl_sensitivity_ranges iwl2000_sensitivity = {
+	.min_nrg_cck = 97,
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 110,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 97,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl2000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl2000_sensitivity;
+}
+
+const struct iwl_dvm_cfg iwl_dvm_2000_cfg = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.hd_v2 = true,
+	.need_temp_offset_calib = true,
+	.temp_offset_v2 = true,
+};
+
+const struct iwl_dvm_cfg iwl_dvm_105_cfg = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.hd_v2 = true,
+	.need_temp_offset_calib = true,
+	.temp_offset_v2 = true,
+	.adv_pm = true,
+};
+
+static const struct iwl_dvm_bt_params iwl2030_bt_params = {
+	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+	.advanced_bt_coexist = true,
+	.agg_time_limit = BT_AGG_THRESHOLD_DEF,
+	.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+	.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT32,
+	.bt_sco_disable = true,
+	.bt_session_2 = true,
+};
+
+const struct iwl_dvm_cfg iwl_dvm_2030_cfg = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.hd_v2 = true,
+	.bt_params = &iwl2030_bt_params,
+	.need_temp_offset_calib = true,
+	.temp_offset_v2 = true,
+	.adv_pm = true,
+};
+
+/*
+ * 5000 series
+ * ===========
+ */
+
+/* NIC configuration for 5000 series */
+static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
+	.min_nrg_cck = 100,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 220,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 120,
+	.auto_corr_max_ofdm_mrc_x1 = 240,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 200,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 100,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static const struct iwl_sensitivity_ranges iwl5150_sensitivity = {
+	.min_nrg_cck = 95,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 220,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	/* max = min for performance bug in 5150 DSP */
+	.auto_corr_max_ofdm_x1 = 105,
+	.auto_corr_max_ofdm_mrc_x1 = 220,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)
+
+static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
+{
+	u16 temperature, voltage;
+
+	temperature = le16_to_cpu(priv->nvm_data->kelvin_temperature);
+	voltage = le16_to_cpu(priv->nvm_data->kelvin_voltage);
+
+	/* offset = temp - volt / coeff */
+	return (s32)(temperature -
+			voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
+}
+
+static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
+{
+	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
+	s32 threshold = (s32)celsius_to_kelvin(CT_KILL_THRESHOLD_LEGACY) -
+			iwl_temp_calib_to_offset(priv);
+
+	priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
+}
+
+static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+}
+
+static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl5000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl5000_sensitivity;
+}
+
+static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl5150_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl5150_sensitivity;
+}
+
+static void iwl5150_temperature(struct iwl_priv *priv)
+{
+	u32 vt = 0;
+	s32 offset =  iwl_temp_calib_to_offset(priv);
+
+	vt = le32_to_cpu(priv->statistics.common.temperature);
+	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
+	/* now vt hold the temperature in Kelvin */
+	priv->temperature = kelvin_to_celsius(vt);
+	iwl_tt_handler(priv);
+}
+
+static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
+				     struct ieee80211_channel_switch *ch_switch)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl5000_channel_switch_cmd cmd;
+	u32 switch_time_in_usec, ucode_switch_time;
+	u16 ch;
+	u32 tsf_low;
+	u8 switch_count;
+	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = { sizeof(cmd), },
+		.data = { &cmd, },
+	};
+
+	cmd.band = priv->band == NL80211_BAND_2GHZ;
+	ch = ch_switch->chandef.chan->hw_value;
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		      ctx->active.channel, ch);
+	cmd.channel = cpu_to_le16(ch);
+	cmd.rxon_flags = ctx->staging.flags;
+	cmd.rxon_filter_flags = ctx->staging.filter_flags;
+	switch_count = ch_switch->count;
+	tsf_low = ch_switch->timestamp & 0x0ffffffff;
+	/*
+	 * calculate the ucode channel switch time
+	 * adding TSF as one of the factor for when to switch
+	 */
+	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+		    beacon_interval)) {
+			switch_count -= (priv->ucode_beacon_time -
+				tsf_low) / beacon_interval;
+		} else
+			switch_count = 0;
+	}
+	if (switch_count <= 1)
+		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	else {
+		switch_time_in_usec =
+			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+		ucode_switch_time = iwl_usecs_to_beacons(priv,
+							 switch_time_in_usec,
+							 beacon_interval);
+		cmd.switch_time = iwl_add_beacon_time(priv,
+						      priv->ucode_beacon_time,
+						      ucode_switch_time,
+						      beacon_interval);
+	}
+	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+		      cmd.switch_time);
+	cmd.expect_beacon =
+		ch_switch->chandef.chan->flags & IEEE80211_CHAN_RADAR;
+
+	return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+const struct iwl_dvm_cfg iwl_dvm_5000_cfg = {
+	.set_hw_params = iwl5000_hw_set_hw_params,
+	.set_channel_switch = iwl5000_hw_channel_switch,
+	.temperature = iwlagn_temperature,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.no_idle_support = true,
+};
+
+const struct iwl_dvm_cfg iwl_dvm_5150_cfg = {
+	.set_hw_params = iwl5150_hw_set_hw_params,
+	.set_channel_switch = iwl5000_hw_channel_switch,
+	.temperature = iwl5150_temperature,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.no_idle_support = true,
+	.no_xtal_calib = true,
+};
+
+
+
+/*
+ * 6000 series
+ * ===========
+ */
+
+static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 6000 series */
+static void iwl6000_nic_config(struct iwl_priv *priv)
+{
+	switch (priv->trans->trans_cfg->device_family) {
+	case IWL_DEVICE_FAMILY_6005:
+	case IWL_DEVICE_FAMILY_6030:
+	case IWL_DEVICE_FAMILY_6000:
+		break;
+	case IWL_DEVICE_FAMILY_6000i:
+		/* 2x2 IPA phy type */
+		iwl_write32(priv->trans, CSR_GP_DRIVER_REG,
+			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
+		break;
+	case IWL_DEVICE_FAMILY_6050:
+		/* Indicate calibration version to uCode. */
+		if (priv->nvm_data->calib_version >= 6)
+			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+		break;
+	case IWL_DEVICE_FAMILY_6150:
+		/* Indicate calibration version to uCode. */
+		if (priv->nvm_data->calib_version >= 6)
+			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+		iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+			    CSR_GP_DRIVER_REG_BIT_6050_1x2);
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+	.min_nrg_cck = 110,
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 110,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 110,
+	.nrg_th_ofdm = 110,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 336,
+	.nrg_th_cca = 62,
+};
+
+static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl6000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl6000_sensitivity;
+
+}
+
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
+				     struct ieee80211_channel_switch *ch_switch)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl6000_channel_switch_cmd *cmd;
+	u32 switch_time_in_usec, ucode_switch_time;
+	u16 ch;
+	u32 tsf_low;
+	u8 switch_count;
+	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = { sizeof(*cmd), },
+		.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+	};
+	int err;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	hcmd.data[0] = cmd;
+
+	cmd->band = priv->band == NL80211_BAND_2GHZ;
+	ch = ch_switch->chandef.chan->hw_value;
+	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+		      ctx->active.channel, ch);
+	cmd->channel = cpu_to_le16(ch);
+	cmd->rxon_flags = ctx->staging.flags;
+	cmd->rxon_filter_flags = ctx->staging.filter_flags;
+	switch_count = ch_switch->count;
+	tsf_low = ch_switch->timestamp & 0x0ffffffff;
+	/*
+	 * calculate the ucode channel switch time
+	 * adding TSF as one of the factor for when to switch
+	 */
+	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+		    beacon_interval)) {
+			switch_count -= (priv->ucode_beacon_time -
+				tsf_low) / beacon_interval;
+		} else
+			switch_count = 0;
+	}
+	if (switch_count <= 1)
+		cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	else {
+		switch_time_in_usec =
+			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+		ucode_switch_time = iwl_usecs_to_beacons(priv,
+							 switch_time_in_usec,
+							 beacon_interval);
+		cmd->switch_time = iwl_add_beacon_time(priv,
+						       priv->ucode_beacon_time,
+						       ucode_switch_time,
+						       beacon_interval);
+	}
+	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+		      cmd->switch_time);
+	cmd->expect_beacon =
+		ch_switch->chandef.chan->flags & IEEE80211_CHAN_RADAR;
+
+	err = iwl_dvm_send_cmd(priv, &hcmd);
+	kfree(cmd);
+	return err;
+}
+
+const struct iwl_dvm_cfg iwl_dvm_6000_cfg = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+};
+
+const struct iwl_dvm_cfg iwl_dvm_6005_cfg = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.need_temp_offset_calib = true,
+};
+
+const struct iwl_dvm_cfg iwl_dvm_6050_cfg = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1500,
+};
+
+static const struct iwl_dvm_bt_params iwl6000_bt_params = {
+	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+	.advanced_bt_coexist = true,
+	.agg_time_limit = BT_AGG_THRESHOLD_DEF,
+	.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+	.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+	.bt_sco_disable = true,
+};
+
+const struct iwl_dvm_cfg iwl_dvm_6030_cfg = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.temperature = iwlagn_temperature,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.bt_params = &iwl6000_bt_params,
+	.need_temp_offset_calib = true,
+	.adv_pm = true,
+};