Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2118 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c
new file mode 100644
index 000000000..4a72ade2c
--- /dev/null
+++ b/drivers/pci/hotplug/ibmphp_res.c
@@ -0,0 +1,2118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IBM Hot Plug Controller Driver
+ *
+ * Written By: Irene Zubarev, IBM Corporation
+ *
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001,2002 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * Send feedback to <gregkh@us.ibm.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include "ibmphp.h"
+
+static int flags = 0;		/* for testing */
+
+static void update_resources(struct bus_node *bus_cur, int type, int rangeno);
+static int once_over(void);
+static int remove_ranges(struct bus_node *, struct bus_node *);
+static int update_bridge_ranges(struct bus_node **);
+static int add_bus_range(int type, struct range_node *, struct bus_node *);
+static void fix_resources(struct bus_node *);
+static struct bus_node *find_bus_wprev(u8, struct bus_node **, u8);
+
+static LIST_HEAD(gbuses);
+
+static struct bus_node * __init alloc_error_bus(struct ebda_pci_rsrc *curr, u8 busno, int flag)
+{
+	struct bus_node *newbus;
+
+	if (!(curr) && !(flag)) {
+		err("NULL pointer passed\n");
+		return NULL;
+	}
+
+	newbus = kzalloc(sizeof(struct bus_node), GFP_KERNEL);
+	if (!newbus)
+		return NULL;
+
+	if (flag)
+		newbus->busno = busno;
+	else
+		newbus->busno = curr->bus_num;
+	list_add_tail(&newbus->bus_list, &gbuses);
+	return newbus;
+}
+
+static struct resource_node * __init alloc_resources(struct ebda_pci_rsrc *curr)
+{
+	struct resource_node *rs;
+
+	if (!curr) {
+		err("NULL passed to allocate\n");
+		return NULL;
+	}
+
+	rs = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+	if (!rs)
+		return NULL;
+
+	rs->busno = curr->bus_num;
+	rs->devfunc = curr->dev_fun;
+	rs->start = curr->start_addr;
+	rs->end = curr->end_addr;
+	rs->len = curr->end_addr - curr->start_addr + 1;
+	return rs;
+}
+
+static int __init alloc_bus_range(struct bus_node **new_bus, struct range_node **new_range, struct ebda_pci_rsrc *curr, int flag, u8 first_bus)
+{
+	struct bus_node *newbus;
+	struct range_node *newrange;
+	u8 num_ranges = 0;
+
+	if (first_bus) {
+		newbus = kzalloc(sizeof(struct bus_node), GFP_KERNEL);
+		if (!newbus)
+			return -ENOMEM;
+
+		newbus->busno = curr->bus_num;
+	} else {
+		newbus = *new_bus;
+		switch (flag) {
+			case MEM:
+				num_ranges = newbus->noMemRanges;
+				break;
+			case PFMEM:
+				num_ranges = newbus->noPFMemRanges;
+				break;
+			case IO:
+				num_ranges = newbus->noIORanges;
+				break;
+		}
+	}
+
+	newrange = kzalloc(sizeof(struct range_node), GFP_KERNEL);
+	if (!newrange) {
+		if (first_bus)
+			kfree(newbus);
+		return -ENOMEM;
+	}
+	newrange->start = curr->start_addr;
+	newrange->end = curr->end_addr;
+
+	if (first_bus || (!num_ranges))
+		newrange->rangeno = 1;
+	else {
+		/* need to insert our range */
+		add_bus_range(flag, newrange, newbus);
+		debug("%d resource Primary Bus inserted on bus %x [%x - %x]\n", flag, newbus->busno, newrange->start, newrange->end);
+	}
+
+	switch (flag) {
+		case MEM:
+			newbus->rangeMem = newrange;
+			if (first_bus)
+				newbus->noMemRanges = 1;
+			else {
+				debug("First Memory Primary on bus %x, [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+				++newbus->noMemRanges;
+				fix_resources(newbus);
+			}
+			break;
+		case IO:
+			newbus->rangeIO = newrange;
+			if (first_bus)
+				newbus->noIORanges = 1;
+			else {
+				debug("First IO Primary on bus %x, [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+				++newbus->noIORanges;
+				fix_resources(newbus);
+			}
+			break;
+		case PFMEM:
+			newbus->rangePFMem = newrange;
+			if (first_bus)
+				newbus->noPFMemRanges = 1;
+			else {
+				debug("1st PFMemory Primary on Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+				++newbus->noPFMemRanges;
+				fix_resources(newbus);
+			}
+
+			break;
+	}
+
+	*new_bus = newbus;
+	*new_range = newrange;
+	return 0;
+}
+
+
+/* Notes:
+ * 1. The ranges are ordered.  The buses are not ordered.  (First come)
+ *
+ * 2. If cannot allocate out of PFMem range, allocate from Mem ranges.  PFmemFromMem
+ * are not sorted. (no need since use mem node). To not change the entire code, we
+ * also add mem node whenever this case happens so as not to change
+ * ibmphp_check_mem_resource etc(and since it really is taking Mem resource)
+ */
+
+/*****************************************************************************
+ * This is the Resource Management initialization function.  It will go through
+ * the Resource list taken from EBDA and fill in this module's data structures
+ *
+ * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES,
+ * SINCE WE'RE GOING TO ASSUME FOR NOW WE DON'T HAVE THOSE ON OUR BUSES FOR NOW
+ *
+ * Input: ptr to the head of the resource list from EBDA
+ * Output: 0, -1 or error codes
+ ***************************************************************************/
+int __init ibmphp_rsrc_init(void)
+{
+	struct ebda_pci_rsrc *curr;
+	struct range_node *newrange = NULL;
+	struct bus_node *newbus = NULL;
+	struct bus_node *bus_cur;
+	struct bus_node *bus_prev;
+	struct resource_node *new_io = NULL;
+	struct resource_node *new_mem = NULL;
+	struct resource_node *new_pfmem = NULL;
+	int rc;
+
+	list_for_each_entry(curr, &ibmphp_ebda_pci_rsrc_head,
+			    ebda_pci_rsrc_list) {
+		if (!(curr->rsrc_type & PCIDEVMASK)) {
+			/* EBDA still lists non PCI devices, so ignore... */
+			debug("this is not a PCI DEVICE in rsrc_init, please take care\n");
+			// continue;
+		}
+
+		/* this is a primary bus resource */
+		if (curr->rsrc_type & PRIMARYBUSMASK) {
+			/* memory */
+			if ((curr->rsrc_type & RESTYPE) == MMASK) {
+				/* no bus structure exists in place yet */
+				if (list_empty(&gbuses)) {
+					rc = alloc_bus_range(&newbus, &newrange, curr, MEM, 1);
+					if (rc)
+						return rc;
+					list_add_tail(&newbus->bus_list, &gbuses);
+					debug("gbuses = NULL, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+				} else {
+					bus_cur = find_bus_wprev(curr->bus_num, &bus_prev, 1);
+					/* found our bus */
+					if (bus_cur) {
+						rc = alloc_bus_range(&bus_cur, &newrange, curr, MEM, 0);
+						if (rc)
+							return rc;
+					} else {
+						/* went through all the buses and didn't find ours, need to create a new bus node */
+						rc = alloc_bus_range(&newbus, &newrange, curr, MEM, 1);
+						if (rc)
+							return rc;
+
+						list_add_tail(&newbus->bus_list, &gbuses);
+						debug("New Bus, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+					}
+				}
+			} else if ((curr->rsrc_type & RESTYPE) == PFMASK) {
+				/* prefetchable memory */
+				if (list_empty(&gbuses)) {
+					/* no bus structure exists in place yet */
+					rc = alloc_bus_range(&newbus, &newrange, curr, PFMEM, 1);
+					if (rc)
+						return rc;
+					list_add_tail(&newbus->bus_list, &gbuses);
+					debug("gbuses = NULL, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+				} else {
+					bus_cur = find_bus_wprev(curr->bus_num, &bus_prev, 1);
+					if (bus_cur) {
+						/* found our bus */
+						rc = alloc_bus_range(&bus_cur, &newrange, curr, PFMEM, 0);
+						if (rc)
+							return rc;
+					} else {
+						/* went through all the buses and didn't find ours, need to create a new bus node */
+						rc = alloc_bus_range(&newbus, &newrange, curr, PFMEM, 1);
+						if (rc)
+							return rc;
+						list_add_tail(&newbus->bus_list, &gbuses);
+						debug("1st Bus, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+					}
+				}
+			} else if ((curr->rsrc_type & RESTYPE) == IOMASK) {
+				/* IO */
+				if (list_empty(&gbuses)) {
+					/* no bus structure exists in place yet */
+					rc = alloc_bus_range(&newbus, &newrange, curr, IO, 1);
+					if (rc)
+						return rc;
+					list_add_tail(&newbus->bus_list, &gbuses);
+					debug("gbuses = NULL, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+				} else {
+					bus_cur = find_bus_wprev(curr->bus_num, &bus_prev, 1);
+					if (bus_cur) {
+						rc = alloc_bus_range(&bus_cur, &newrange, curr, IO, 0);
+						if (rc)
+							return rc;
+					} else {
+						/* went through all the buses and didn't find ours, need to create a new bus node */
+						rc = alloc_bus_range(&newbus, &newrange, curr, IO, 1);
+						if (rc)
+							return rc;
+						list_add_tail(&newbus->bus_list, &gbuses);
+						debug("1st Bus, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+					}
+				}
+
+			} else {
+				;	/* type is reserved  WHAT TO DO IN THIS CASE???
+					   NOTHING TO DO??? */
+			}
+		} else {
+			/* regular pci device resource */
+			if ((curr->rsrc_type & RESTYPE) == MMASK) {
+				/* Memory resource */
+				new_mem = alloc_resources(curr);
+				if (!new_mem)
+					return -ENOMEM;
+				new_mem->type = MEM;
+				/*
+				 * if it didn't find the bus, means PCI dev
+				 * came b4 the Primary Bus info, so need to
+				 * create a bus rangeno becomes a problem...
+				 * assign a -1 and then update once the range
+				 * actually appears...
+				 */
+				if (ibmphp_add_resource(new_mem) < 0) {
+					newbus = alloc_error_bus(curr, 0, 0);
+					if (!newbus)
+						return -ENOMEM;
+					newbus->firstMem = new_mem;
+					++newbus->needMemUpdate;
+					new_mem->rangeno = -1;
+				}
+				debug("Memory resource for device %x, bus %x, [%x - %x]\n", new_mem->devfunc, new_mem->busno, new_mem->start, new_mem->end);
+
+			} else if ((curr->rsrc_type & RESTYPE) == PFMASK) {
+				/* PFMemory resource */
+				new_pfmem = alloc_resources(curr);
+				if (!new_pfmem)
+					return -ENOMEM;
+				new_pfmem->type = PFMEM;
+				new_pfmem->fromMem = 0;
+				if (ibmphp_add_resource(new_pfmem) < 0) {
+					newbus = alloc_error_bus(curr, 0, 0);
+					if (!newbus)
+						return -ENOMEM;
+					newbus->firstPFMem = new_pfmem;
+					++newbus->needPFMemUpdate;
+					new_pfmem->rangeno = -1;
+				}
+
+				debug("PFMemory resource for device %x, bus %x, [%x - %x]\n", new_pfmem->devfunc, new_pfmem->busno, new_pfmem->start, new_pfmem->end);
+			} else if ((curr->rsrc_type & RESTYPE) == IOMASK) {
+				/* IO resource */
+				new_io = alloc_resources(curr);
+				if (!new_io)
+					return -ENOMEM;
+				new_io->type = IO;
+
+				/*
+				 * if it didn't find the bus, means PCI dev
+				 * came b4 the Primary Bus info, so need to
+				 * create a bus rangeno becomes a problem...
+				 * Can assign a -1 and then update once the
+				 * range actually appears...
+				 */
+				if (ibmphp_add_resource(new_io) < 0) {
+					newbus = alloc_error_bus(curr, 0, 0);
+					if (!newbus)
+						return -ENOMEM;
+					newbus->firstIO = new_io;
+					++newbus->needIOUpdate;
+					new_io->rangeno = -1;
+				}
+				debug("IO resource for device %x, bus %x, [%x - %x]\n", new_io->devfunc, new_io->busno, new_io->start, new_io->end);
+			}
+		}
+	}
+
+	list_for_each_entry(bus_cur, &gbuses, bus_list) {
+		/* This is to get info about PPB resources, since EBDA doesn't put this info into the primary bus info */
+		rc = update_bridge_ranges(&bus_cur);
+		if (rc)
+			return rc;
+	}
+	return once_over();	/* This is to align ranges (so no -1) */
+}
+
+/********************************************************************************
+ * This function adds a range into a sorted list of ranges per bus for a particular
+ * range type, it then calls another routine to update the range numbers on the
+ * pci devices' resources for the appropriate resource
+ *
+ * Input: type of the resource, range to add, current bus
+ * Output: 0 or -1, bus and range ptrs
+ ********************************************************************************/
+static int add_bus_range(int type, struct range_node *range, struct bus_node *bus_cur)
+{
+	struct range_node *range_cur = NULL;
+	struct range_node *range_prev;
+	int count = 0, i_init;
+	int noRanges = 0;
+
+	switch (type) {
+		case MEM:
+			range_cur = bus_cur->rangeMem;
+			noRanges = bus_cur->noMemRanges;
+			break;
+		case PFMEM:
+			range_cur = bus_cur->rangePFMem;
+			noRanges = bus_cur->noPFMemRanges;
+			break;
+		case IO:
+			range_cur = bus_cur->rangeIO;
+			noRanges = bus_cur->noIORanges;
+			break;
+	}
+
+	range_prev = NULL;
+	while (range_cur) {
+		if (range->start < range_cur->start)
+			break;
+		range_prev = range_cur;
+		range_cur = range_cur->next;
+		count = count + 1;
+	}
+	if (!count) {
+		/* our range will go at the beginning of the list */
+		switch (type) {
+			case MEM:
+				bus_cur->rangeMem = range;
+				break;
+			case PFMEM:
+				bus_cur->rangePFMem = range;
+				break;
+			case IO:
+				bus_cur->rangeIO = range;
+				break;
+		}
+		range->next = range_cur;
+		range->rangeno = 1;
+		i_init = 0;
+	} else if (!range_cur) {
+		/* our range will go at the end of the list */
+		range->next = NULL;
+		range_prev->next = range;
+		range->rangeno = range_prev->rangeno + 1;
+		return 0;
+	} else {
+		/* the range is in the middle */
+		range_prev->next = range;
+		range->next = range_cur;
+		range->rangeno = range_cur->rangeno;
+		i_init = range_prev->rangeno;
+	}
+
+	for (count = i_init; count < noRanges; ++count) {
+		++range_cur->rangeno;
+		range_cur = range_cur->next;
+	}
+
+	update_resources(bus_cur, type, i_init + 1);
+	return 0;
+}
+
+/*******************************************************************************
+ * This routine goes through the list of resources of type 'type' and updates
+ * the range numbers that they correspond to.  It was called from add_bus_range fnc
+ *
+ * Input: bus, type of the resource, the rangeno starting from which to update
+ ******************************************************************************/
+static void update_resources(struct bus_node *bus_cur, int type, int rangeno)
+{
+	struct resource_node *res = NULL;
+	u8 eol = 0;	/* end of list indicator */
+
+	switch (type) {
+		case MEM:
+			if (bus_cur->firstMem)
+				res = bus_cur->firstMem;
+			break;
+		case PFMEM:
+			if (bus_cur->firstPFMem)
+				res = bus_cur->firstPFMem;
+			break;
+		case IO:
+			if (bus_cur->firstIO)
+				res = bus_cur->firstIO;
+			break;
+	}
+
+	if (res) {
+		while (res) {
+			if (res->rangeno == rangeno)
+				break;
+			if (res->next)
+				res = res->next;
+			else if (res->nextRange)
+				res = res->nextRange;
+			else {
+				eol = 1;
+				break;
+			}
+		}
+
+		if (!eol) {
+			/* found the range */
+			while (res) {
+				++res->rangeno;
+				res = res->next;
+			}
+		}
+	}
+}
+
+static void fix_me(struct resource_node *res, struct bus_node *bus_cur, struct range_node *range)
+{
+	char *str = "";
+	switch (res->type) {
+		case IO:
+			str = "io";
+			break;
+		case MEM:
+			str = "mem";
+			break;
+		case PFMEM:
+			str = "pfmem";
+			break;
+	}
+
+	while (res) {
+		if (res->rangeno == -1) {
+			while (range) {
+				if ((res->start >= range->start) && (res->end <= range->end)) {
+					res->rangeno = range->rangeno;
+					debug("%s->rangeno in fix_resources is %d\n", str, res->rangeno);
+					switch (res->type) {
+						case IO:
+							--bus_cur->needIOUpdate;
+							break;
+						case MEM:
+							--bus_cur->needMemUpdate;
+							break;
+						case PFMEM:
+							--bus_cur->needPFMemUpdate;
+							break;
+					}
+					break;
+				}
+				range = range->next;
+			}
+		}
+		if (res->next)
+			res = res->next;
+		else
+			res = res->nextRange;
+	}
+
+}
+
+/*****************************************************************************
+ * This routine reassigns the range numbers to the resources that had a -1
+ * This case can happen only if upon initialization, resources taken by pci dev
+ * appear in EBDA before the resources allocated for that bus, since we don't
+ * know the range, we assign -1, and this routine is called after a new range
+ * is assigned to see the resources with unknown range belong to the added range
+ *
+ * Input: current bus
+ * Output: none, list of resources for that bus are fixed if can be
+ *******************************************************************************/
+static void fix_resources(struct bus_node *bus_cur)
+{
+	struct range_node *range;
+	struct resource_node *res;
+
+	debug("%s - bus_cur->busno = %d\n", __func__, bus_cur->busno);
+
+	if (bus_cur->needIOUpdate) {
+		res = bus_cur->firstIO;
+		range = bus_cur->rangeIO;
+		fix_me(res, bus_cur, range);
+	}
+	if (bus_cur->needMemUpdate) {
+		res = bus_cur->firstMem;
+		range = bus_cur->rangeMem;
+		fix_me(res, bus_cur, range);
+	}
+	if (bus_cur->needPFMemUpdate) {
+		res = bus_cur->firstPFMem;
+		range = bus_cur->rangePFMem;
+		fix_me(res, bus_cur, range);
+	}
+}
+
+/*******************************************************************************
+ * This routine adds a resource to the list of resources to the appropriate bus
+ * based on their resource type and sorted by their starting addresses.  It assigns
+ * the ptrs to next and nextRange if needed.
+ *
+ * Input: resource ptr
+ * Output: ptrs assigned (to the node)
+ * 0 or -1
+ *******************************************************************************/
+int ibmphp_add_resource(struct resource_node *res)
+{
+	struct resource_node *res_cur;
+	struct resource_node *res_prev;
+	struct bus_node *bus_cur;
+	struct range_node *range_cur = NULL;
+	struct resource_node *res_start = NULL;
+
+	debug("%s - enter\n", __func__);
+
+	if (!res) {
+		err("NULL passed to add\n");
+		return -ENODEV;
+	}
+
+	bus_cur = find_bus_wprev(res->busno, NULL, 0);
+
+	if (!bus_cur) {
+		/* didn't find a bus, something's wrong!!! */
+		debug("no bus in the system, either pci_dev's wrong or allocation failed\n");
+		return -ENODEV;
+	}
+
+	/* Normal case */
+	switch (res->type) {
+		case IO:
+			range_cur = bus_cur->rangeIO;
+			res_start = bus_cur->firstIO;
+			break;
+		case MEM:
+			range_cur = bus_cur->rangeMem;
+			res_start = bus_cur->firstMem;
+			break;
+		case PFMEM:
+			range_cur = bus_cur->rangePFMem;
+			res_start = bus_cur->firstPFMem;
+			break;
+		default:
+			err("cannot read the type of the resource to add... problem\n");
+			return -EINVAL;
+	}
+	while (range_cur) {
+		if ((res->start >= range_cur->start) && (res->end <= range_cur->end)) {
+			res->rangeno = range_cur->rangeno;
+			break;
+		}
+		range_cur = range_cur->next;
+	}
+
+	/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	 * this is again the case of rangeno = -1
+	 * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	 */
+
+	if (!range_cur) {
+		switch (res->type) {
+			case IO:
+				++bus_cur->needIOUpdate;
+				break;
+			case MEM:
+				++bus_cur->needMemUpdate;
+				break;
+			case PFMEM:
+				++bus_cur->needPFMemUpdate;
+				break;
+		}
+		res->rangeno = -1;
+	}
+
+	debug("The range is %d\n", res->rangeno);
+	if (!res_start) {
+		/* no first{IO,Mem,Pfmem} on the bus, 1st IO/Mem/Pfmem resource ever */
+		switch (res->type) {
+			case IO:
+				bus_cur->firstIO = res;
+				break;
+			case MEM:
+				bus_cur->firstMem = res;
+				break;
+			case PFMEM:
+				bus_cur->firstPFMem = res;
+				break;
+		}
+		res->next = NULL;
+		res->nextRange = NULL;
+	} else {
+		res_cur = res_start;
+		res_prev = NULL;
+
+		debug("res_cur->rangeno is %d\n", res_cur->rangeno);
+
+		while (res_cur) {
+			if (res_cur->rangeno >= res->rangeno)
+				break;
+			res_prev = res_cur;
+			if (res_cur->next)
+				res_cur = res_cur->next;
+			else
+				res_cur = res_cur->nextRange;
+		}
+
+		if (!res_cur) {
+			/* at the end of the resource list */
+			debug("i should be here, [%x - %x]\n", res->start, res->end);
+			res_prev->nextRange = res;
+			res->next = NULL;
+			res->nextRange = NULL;
+		} else if (res_cur->rangeno == res->rangeno) {
+			/* in the same range */
+			while (res_cur) {
+				if (res->start < res_cur->start)
+					break;
+				res_prev = res_cur;
+				res_cur = res_cur->next;
+			}
+			if (!res_cur) {
+				/* the last resource in this range */
+				res_prev->next = res;
+				res->next = NULL;
+				res->nextRange = res_prev->nextRange;
+				res_prev->nextRange = NULL;
+			} else if (res->start < res_cur->start) {
+				/* at the beginning or middle of the range */
+				if (!res_prev)	{
+					switch (res->type) {
+						case IO:
+							bus_cur->firstIO = res;
+							break;
+						case MEM:
+							bus_cur->firstMem = res;
+							break;
+						case PFMEM:
+							bus_cur->firstPFMem = res;
+							break;
+					}
+				} else if (res_prev->rangeno == res_cur->rangeno)
+					res_prev->next = res;
+				else
+					res_prev->nextRange = res;
+
+				res->next = res_cur;
+				res->nextRange = NULL;
+			}
+		} else {
+			/* this is the case where it is 1st occurrence of the range */
+			if (!res_prev) {
+				/* at the beginning of the resource list */
+				res->next = NULL;
+				switch (res->type) {
+					case IO:
+						res->nextRange = bus_cur->firstIO;
+						bus_cur->firstIO = res;
+						break;
+					case MEM:
+						res->nextRange = bus_cur->firstMem;
+						bus_cur->firstMem = res;
+						break;
+					case PFMEM:
+						res->nextRange = bus_cur->firstPFMem;
+						bus_cur->firstPFMem = res;
+						break;
+				}
+			} else if (res_cur->rangeno > res->rangeno) {
+				/* in the middle of the resource list */
+				res_prev->nextRange = res;
+				res->next = NULL;
+				res->nextRange = res_cur;
+			}
+		}
+	}
+
+	debug("%s - exit\n", __func__);
+	return 0;
+}
+
+/****************************************************************************
+ * This routine will remove the resource from the list of resources
+ *
+ * Input: io, mem, and/or pfmem resource to be deleted
+ * Output: modified resource list
+ *        0 or error code
+ ****************************************************************************/
+int ibmphp_remove_resource(struct resource_node *res)
+{
+	struct bus_node *bus_cur;
+	struct resource_node *res_cur = NULL;
+	struct resource_node *res_prev;
+	struct resource_node *mem_cur;
+	char *type = "";
+
+	if (!res)  {
+		err("resource to remove is NULL\n");
+		return -ENODEV;
+	}
+
+	bus_cur = find_bus_wprev(res->busno, NULL, 0);
+
+	if (!bus_cur) {
+		err("cannot find corresponding bus of the io resource to remove  bailing out...\n");
+		return -ENODEV;
+	}
+
+	switch (res->type) {
+		case IO:
+			res_cur = bus_cur->firstIO;
+			type = "io";
+			break;
+		case MEM:
+			res_cur = bus_cur->firstMem;
+			type = "mem";
+			break;
+		case PFMEM:
+			res_cur = bus_cur->firstPFMem;
+			type = "pfmem";
+			break;
+		default:
+			err("unknown type for resource to remove\n");
+			return -EINVAL;
+	}
+	res_prev = NULL;
+
+	while (res_cur) {
+		if ((res_cur->start == res->start) && (res_cur->end == res->end))
+			break;
+		res_prev = res_cur;
+		if (res_cur->next)
+			res_cur = res_cur->next;
+		else
+			res_cur = res_cur->nextRange;
+	}
+
+	if (!res_cur) {
+		if (res->type == PFMEM) {
+			/*
+			 * case where pfmem might be in the PFMemFromMem list
+			 * so will also need to remove the corresponding mem
+			 * entry
+			 */
+			res_cur = bus_cur->firstPFMemFromMem;
+			res_prev = NULL;
+
+			while (res_cur) {
+				if ((res_cur->start == res->start) && (res_cur->end == res->end)) {
+					mem_cur = bus_cur->firstMem;
+					while (mem_cur) {
+						if ((mem_cur->start == res_cur->start)
+						    && (mem_cur->end == res_cur->end))
+							break;
+						if (mem_cur->next)
+							mem_cur = mem_cur->next;
+						else
+							mem_cur = mem_cur->nextRange;
+					}
+					if (!mem_cur) {
+						err("cannot find corresponding mem node for pfmem...\n");
+						return -EINVAL;
+					}
+
+					ibmphp_remove_resource(mem_cur);
+					if (!res_prev)
+						bus_cur->firstPFMemFromMem = res_cur->next;
+					else
+						res_prev->next = res_cur->next;
+					kfree(res_cur);
+					return 0;
+				}
+				res_prev = res_cur;
+				if (res_cur->next)
+					res_cur = res_cur->next;
+				else
+					res_cur = res_cur->nextRange;
+			}
+			if (!res_cur) {
+				err("cannot find pfmem to delete...\n");
+				return -EINVAL;
+			}
+		} else {
+			err("the %s resource is not in the list to be deleted...\n", type);
+			return -EINVAL;
+		}
+	}
+	if (!res_prev) {
+		/* first device to be deleted */
+		if (res_cur->next) {
+			switch (res->type) {
+				case IO:
+					bus_cur->firstIO = res_cur->next;
+					break;
+				case MEM:
+					bus_cur->firstMem = res_cur->next;
+					break;
+				case PFMEM:
+					bus_cur->firstPFMem = res_cur->next;
+					break;
+			}
+		} else if (res_cur->nextRange) {
+			switch (res->type) {
+				case IO:
+					bus_cur->firstIO = res_cur->nextRange;
+					break;
+				case MEM:
+					bus_cur->firstMem = res_cur->nextRange;
+					break;
+				case PFMEM:
+					bus_cur->firstPFMem = res_cur->nextRange;
+					break;
+			}
+		} else {
+			switch (res->type) {
+				case IO:
+					bus_cur->firstIO = NULL;
+					break;
+				case MEM:
+					bus_cur->firstMem = NULL;
+					break;
+				case PFMEM:
+					bus_cur->firstPFMem = NULL;
+					break;
+			}
+		}
+		kfree(res_cur);
+		return 0;
+	} else {
+		if (res_cur->next) {
+			if (res_prev->rangeno == res_cur->rangeno)
+				res_prev->next = res_cur->next;
+			else
+				res_prev->nextRange = res_cur->next;
+		} else if (res_cur->nextRange) {
+			res_prev->next = NULL;
+			res_prev->nextRange = res_cur->nextRange;
+		} else {
+			res_prev->next = NULL;
+			res_prev->nextRange = NULL;
+		}
+		kfree(res_cur);
+		return 0;
+	}
+
+	return 0;
+}
+
+static struct range_node *find_range(struct bus_node *bus_cur, struct resource_node *res)
+{
+	struct range_node *range = NULL;
+
+	switch (res->type) {
+		case IO:
+			range = bus_cur->rangeIO;
+			break;
+		case MEM:
+			range = bus_cur->rangeMem;
+			break;
+		case PFMEM:
+			range = bus_cur->rangePFMem;
+			break;
+		default:
+			err("cannot read resource type in find_range\n");
+	}
+
+	while (range) {
+		if (res->rangeno == range->rangeno)
+			break;
+		range = range->next;
+	}
+	return range;
+}
+
+/*****************************************************************************
+ * This routine will check to make sure the io/mem/pfmem->len that the device asked for
+ * can fit w/i our list of available IO/MEM/PFMEM resources.  If cannot, returns -EINVAL,
+ * otherwise, returns 0
+ *
+ * Input: resource
+ * Output: the correct start and end address are inputted into the resource node,
+ *        0 or -EINVAL
+ *****************************************************************************/
+int ibmphp_check_resource(struct resource_node *res, u8 bridge)
+{
+	struct bus_node *bus_cur;
+	struct range_node *range = NULL;
+	struct resource_node *res_prev;
+	struct resource_node *res_cur = NULL;
+	u32 len_cur = 0, start_cur = 0, len_tmp = 0;
+	int noranges = 0;
+	u32 tmp_start;		/* this is to make sure start address is divisible by the length needed */
+	u32 tmp_divide;
+	u8 flag = 0;
+
+	if (!res)
+		return -EINVAL;
+
+	if (bridge) {
+		/* The rules for bridges are different, 4K divisible for IO, 1M for (pf)mem*/
+		if (res->type == IO)
+			tmp_divide = IOBRIDGE;
+		else
+			tmp_divide = MEMBRIDGE;
+	} else
+		tmp_divide = res->len;
+
+	bus_cur = find_bus_wprev(res->busno, NULL, 0);
+
+	if (!bus_cur) {
+		/* didn't find a bus, something's wrong!!! */
+		debug("no bus in the system, either pci_dev's wrong or allocation failed\n");
+		return -EINVAL;
+	}
+
+	debug("%s - enter\n", __func__);
+	debug("bus_cur->busno is %d\n", bus_cur->busno);
+
+	/* This is a quick fix to not mess up with the code very much.  i.e.,
+	 * 2000-2fff, len = 1000, but when we compare, we need it to be fff */
+	res->len -= 1;
+
+	switch (res->type) {
+		case IO:
+			res_cur = bus_cur->firstIO;
+			noranges = bus_cur->noIORanges;
+			break;
+		case MEM:
+			res_cur = bus_cur->firstMem;
+			noranges = bus_cur->noMemRanges;
+			break;
+		case PFMEM:
+			res_cur = bus_cur->firstPFMem;
+			noranges = bus_cur->noPFMemRanges;
+			break;
+		default:
+			err("wrong type of resource to check\n");
+			return -EINVAL;
+	}
+	res_prev = NULL;
+
+	while (res_cur) {
+		range = find_range(bus_cur, res_cur);
+		debug("%s - rangeno = %d\n", __func__, res_cur->rangeno);
+
+		if (!range) {
+			err("no range for the device exists... bailing out...\n");
+			return -EINVAL;
+		}
+
+		/* found our range */
+		if (!res_prev) {
+			/* first time in the loop */
+			len_tmp = res_cur->start - 1 - range->start;
+
+			if ((res_cur->start != range->start) && (len_tmp >= res->len)) {
+				debug("len_tmp = %x\n", len_tmp);
+
+				if ((len_tmp < len_cur) || (len_cur == 0)) {
+
+					if ((range->start % tmp_divide) == 0) {
+						/* just perfect, starting address is divisible by length */
+						flag = 1;
+						len_cur = len_tmp;
+						start_cur = range->start;
+					} else {
+						/* Needs adjusting */
+						tmp_start = range->start;
+						flag = 0;
+
+						while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) {
+							if ((tmp_start % tmp_divide) == 0) {
+								flag = 1;
+								len_cur = len_tmp;
+								start_cur = tmp_start;
+								break;
+							}
+							tmp_start += tmp_divide - tmp_start % tmp_divide;
+							if (tmp_start >= res_cur->start - 1)
+								break;
+						}
+					}
+
+					if (flag && len_cur == res->len) {
+						debug("but we are not here, right?\n");
+						res->start = start_cur;
+						res->len += 1; /* To restore the balance */
+						res->end = res->start + res->len - 1;
+						return 0;
+					}
+				}
+			}
+		}
+		if (!res_cur->next) {
+			/* last device on the range */
+			len_tmp = range->end - (res_cur->end + 1);
+
+			if ((range->end != res_cur->end) && (len_tmp >= res->len)) {
+				debug("len_tmp = %x\n", len_tmp);
+				if ((len_tmp < len_cur) || (len_cur == 0)) {
+
+					if (((res_cur->end + 1) % tmp_divide) == 0) {
+						/* just perfect, starting address is divisible by length */
+						flag = 1;
+						len_cur = len_tmp;
+						start_cur = res_cur->end + 1;
+					} else {
+						/* Needs adjusting */
+						tmp_start = res_cur->end + 1;
+						flag = 0;
+
+						while ((len_tmp = range->end - tmp_start) >= res->len) {
+							if ((tmp_start % tmp_divide) == 0) {
+								flag = 1;
+								len_cur = len_tmp;
+								start_cur = tmp_start;
+								break;
+							}
+							tmp_start += tmp_divide - tmp_start % tmp_divide;
+							if (tmp_start >= range->end)
+								break;
+						}
+					}
+					if (flag && len_cur == res->len) {
+						res->start = start_cur;
+						res->len += 1; /* To restore the balance */
+						res->end = res->start + res->len - 1;
+						return 0;
+					}
+				}
+			}
+		}
+
+		if (res_prev) {
+			if (res_prev->rangeno != res_cur->rangeno) {
+				/* 1st device on this range */
+				len_tmp = res_cur->start - 1 - range->start;
+
+				if ((res_cur->start != range->start) &&	(len_tmp >= res->len)) {
+					if ((len_tmp < len_cur) || (len_cur == 0)) {
+						if ((range->start % tmp_divide) == 0) {
+							/* just perfect, starting address is divisible by length */
+							flag = 1;
+							len_cur = len_tmp;
+							start_cur = range->start;
+						} else {
+							/* Needs adjusting */
+							tmp_start = range->start;
+							flag = 0;
+
+							while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) {
+								if ((tmp_start % tmp_divide) == 0) {
+									flag = 1;
+									len_cur = len_tmp;
+									start_cur = tmp_start;
+									break;
+								}
+								tmp_start += tmp_divide - tmp_start % tmp_divide;
+								if (tmp_start >= res_cur->start - 1)
+									break;
+							}
+						}
+
+						if (flag && len_cur == res->len) {
+							res->start = start_cur;
+							res->len += 1; /* To restore the balance */
+							res->end = res->start + res->len - 1;
+							return 0;
+						}
+					}
+				}
+			} else {
+				/* in the same range */
+				len_tmp = res_cur->start - 1 - res_prev->end - 1;
+
+				if (len_tmp >= res->len) {
+					if ((len_tmp < len_cur) || (len_cur == 0)) {
+						if (((res_prev->end + 1) % tmp_divide) == 0) {
+							/* just perfect, starting address's divisible by length */
+							flag = 1;
+							len_cur = len_tmp;
+							start_cur = res_prev->end + 1;
+						} else {
+							/* Needs adjusting */
+							tmp_start = res_prev->end + 1;
+							flag = 0;
+
+							while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) {
+								if ((tmp_start % tmp_divide) == 0) {
+									flag = 1;
+									len_cur = len_tmp;
+									start_cur = tmp_start;
+									break;
+								}
+								tmp_start += tmp_divide - tmp_start % tmp_divide;
+								if (tmp_start >= res_cur->start - 1)
+									break;
+							}
+						}
+
+						if (flag && len_cur == res->len) {
+							res->start = start_cur;
+							res->len += 1; /* To restore the balance */
+							res->end = res->start + res->len - 1;
+							return 0;
+						}
+					}
+				}
+			}
+		}
+		/* end if (res_prev) */
+		res_prev = res_cur;
+		if (res_cur->next)
+			res_cur = res_cur->next;
+		else
+			res_cur = res_cur->nextRange;
+	}	/* end of while */
+
+
+	if (!res_prev) {
+		/* 1st device ever */
+		/* need to find appropriate range */
+		switch (res->type) {
+			case IO:
+				range = bus_cur->rangeIO;
+				break;
+			case MEM:
+				range = bus_cur->rangeMem;
+				break;
+			case PFMEM:
+				range = bus_cur->rangePFMem;
+				break;
+		}
+		while (range) {
+			len_tmp = range->end - range->start;
+
+			if (len_tmp >= res->len) {
+				if ((len_tmp < len_cur) || (len_cur == 0)) {
+					if ((range->start % tmp_divide) == 0) {
+						/* just perfect, starting address's divisible by length */
+						flag = 1;
+						len_cur = len_tmp;
+						start_cur = range->start;
+					} else {
+						/* Needs adjusting */
+						tmp_start = range->start;
+						flag = 0;
+
+						while ((len_tmp = range->end - tmp_start) >= res->len) {
+							if ((tmp_start % tmp_divide) == 0) {
+								flag = 1;
+								len_cur = len_tmp;
+								start_cur = tmp_start;
+								break;
+							}
+							tmp_start += tmp_divide - tmp_start % tmp_divide;
+							if (tmp_start >= range->end)
+								break;
+						}
+					}
+
+					if (flag && len_cur == res->len) {
+						res->start = start_cur;
+						res->len += 1; /* To restore the balance */
+						res->end = res->start + res->len - 1;
+						return 0;
+					}
+				}
+			}
+			range = range->next;
+		}		/* end of while */
+
+		if ((!range) && (len_cur == 0)) {
+			/* have gone through the list of devices and ranges and haven't found n.e.thing */
+			err("no appropriate range.. bailing out...\n");
+			return -EINVAL;
+		} else if (len_cur) {
+			res->start = start_cur;
+			res->len += 1; /* To restore the balance */
+			res->end = res->start + res->len - 1;
+			return 0;
+		}
+	}
+
+	if (!res_cur) {
+		debug("prev->rangeno = %d, noranges = %d\n", res_prev->rangeno, noranges);
+		if (res_prev->rangeno < noranges) {
+			/* if there're more ranges out there to check */
+			switch (res->type) {
+				case IO:
+					range = bus_cur->rangeIO;
+					break;
+				case MEM:
+					range = bus_cur->rangeMem;
+					break;
+				case PFMEM:
+					range = bus_cur->rangePFMem;
+					break;
+			}
+			while (range) {
+				len_tmp = range->end - range->start;
+
+				if (len_tmp >= res->len) {
+					if ((len_tmp < len_cur) || (len_cur == 0)) {
+						if ((range->start % tmp_divide) == 0) {
+							/* just perfect, starting address's divisible by length */
+							flag = 1;
+							len_cur = len_tmp;
+							start_cur = range->start;
+						} else {
+							/* Needs adjusting */
+							tmp_start = range->start;
+							flag = 0;
+
+							while ((len_tmp = range->end - tmp_start) >= res->len) {
+								if ((tmp_start % tmp_divide) == 0) {
+									flag = 1;
+									len_cur = len_tmp;
+									start_cur = tmp_start;
+									break;
+								}
+								tmp_start += tmp_divide - tmp_start % tmp_divide;
+								if (tmp_start >= range->end)
+									break;
+							}
+						}
+
+						if (flag && len_cur == res->len) {
+							res->start = start_cur;
+							res->len += 1; /* To restore the balance */
+							res->end = res->start + res->len - 1;
+							return 0;
+						}
+					}
+				}
+				range = range->next;
+			}	/* end of while */
+
+			if ((!range) && (len_cur == 0)) {
+				/* have gone through the list of devices and ranges and haven't found n.e.thing */
+				err("no appropriate range.. bailing out...\n");
+				return -EINVAL;
+			} else if (len_cur) {
+				res->start = start_cur;
+				res->len += 1; /* To restore the balance */
+				res->end = res->start + res->len - 1;
+				return 0;
+			}
+		} else {
+			/* no more ranges to check on */
+			if (len_cur) {
+				res->start = start_cur;
+				res->len += 1; /* To restore the balance */
+				res->end = res->start + res->len - 1;
+				return 0;
+			} else {
+				/* have gone through the list of devices and haven't found n.e.thing */
+				err("no appropriate range.. bailing out...\n");
+				return -EINVAL;
+			}
+		}
+	}	/* end if (!res_cur) */
+	return -EINVAL;
+}
+
+/********************************************************************************
+ * This routine is called from remove_card if the card contained PPB.
+ * It will remove all the resources on the bus as well as the bus itself
+ * Input: Bus
+ * Output: 0, -ENODEV
+ ********************************************************************************/
+int ibmphp_remove_bus(struct bus_node *bus, u8 parent_busno)
+{
+	struct resource_node *res_cur;
+	struct resource_node *res_tmp;
+	struct bus_node *prev_bus;
+	int rc;
+
+	prev_bus = find_bus_wprev(parent_busno, NULL, 0);
+
+	if (!prev_bus) {
+		debug("something terribly wrong. Cannot find parent bus to the one to remove\n");
+		return -ENODEV;
+	}
+
+	debug("In ibmphp_remove_bus... prev_bus->busno is %x\n", prev_bus->busno);
+
+	rc = remove_ranges(bus, prev_bus);
+	if (rc)
+		return rc;
+
+	if (bus->firstIO) {
+		res_cur = bus->firstIO;
+		while (res_cur) {
+			res_tmp = res_cur;
+			if (res_cur->next)
+				res_cur = res_cur->next;
+			else
+				res_cur = res_cur->nextRange;
+			kfree(res_tmp);
+			res_tmp = NULL;
+		}
+		bus->firstIO = NULL;
+	}
+	if (bus->firstMem) {
+		res_cur = bus->firstMem;
+		while (res_cur) {
+			res_tmp = res_cur;
+			if (res_cur->next)
+				res_cur = res_cur->next;
+			else
+				res_cur = res_cur->nextRange;
+			kfree(res_tmp);
+			res_tmp = NULL;
+		}
+		bus->firstMem = NULL;
+	}
+	if (bus->firstPFMem) {
+		res_cur = bus->firstPFMem;
+		while (res_cur) {
+			res_tmp = res_cur;
+			if (res_cur->next)
+				res_cur = res_cur->next;
+			else
+				res_cur = res_cur->nextRange;
+			kfree(res_tmp);
+			res_tmp = NULL;
+		}
+		bus->firstPFMem = NULL;
+	}
+
+	if (bus->firstPFMemFromMem) {
+		res_cur = bus->firstPFMemFromMem;
+		while (res_cur) {
+			res_tmp = res_cur;
+			res_cur = res_cur->next;
+
+			kfree(res_tmp);
+			res_tmp = NULL;
+		}
+		bus->firstPFMemFromMem = NULL;
+	}
+
+	list_del(&bus->bus_list);
+	kfree(bus);
+	return 0;
+}
+
+/******************************************************************************
+ * This routine deletes the ranges from a given bus, and the entries from the
+ * parent's bus in the resources
+ * Input: current bus, previous bus
+ * Output: 0, -EINVAL
+ ******************************************************************************/
+static int remove_ranges(struct bus_node *bus_cur, struct bus_node *bus_prev)
+{
+	struct range_node *range_cur;
+	struct range_node *range_tmp;
+	int i;
+	struct resource_node *res = NULL;
+
+	if (bus_cur->noIORanges) {
+		range_cur = bus_cur->rangeIO;
+		for (i = 0; i < bus_cur->noIORanges; i++) {
+			if (ibmphp_find_resource(bus_prev, range_cur->start, &res, IO) < 0)
+				return -EINVAL;
+			ibmphp_remove_resource(res);
+
+			range_tmp = range_cur;
+			range_cur = range_cur->next;
+			kfree(range_tmp);
+			range_tmp = NULL;
+		}
+		bus_cur->rangeIO = NULL;
+	}
+	if (bus_cur->noMemRanges) {
+		range_cur = bus_cur->rangeMem;
+		for (i = 0; i < bus_cur->noMemRanges; i++) {
+			if (ibmphp_find_resource(bus_prev, range_cur->start, &res, MEM) < 0)
+				return -EINVAL;
+
+			ibmphp_remove_resource(res);
+			range_tmp = range_cur;
+			range_cur = range_cur->next;
+			kfree(range_tmp);
+			range_tmp = NULL;
+		}
+		bus_cur->rangeMem = NULL;
+	}
+	if (bus_cur->noPFMemRanges) {
+		range_cur = bus_cur->rangePFMem;
+		for (i = 0; i < bus_cur->noPFMemRanges; i++) {
+			if (ibmphp_find_resource(bus_prev, range_cur->start, &res, PFMEM) < 0)
+				return -EINVAL;
+
+			ibmphp_remove_resource(res);
+			range_tmp = range_cur;
+			range_cur = range_cur->next;
+			kfree(range_tmp);
+			range_tmp = NULL;
+		}
+		bus_cur->rangePFMem = NULL;
+	}
+	return 0;
+}
+
+/*
+ * find the resource node in the bus
+ * Input: Resource needed, start address of the resource, type of resource
+ */
+int ibmphp_find_resource(struct bus_node *bus, u32 start_address, struct resource_node **res, int flag)
+{
+	struct resource_node *res_cur = NULL;
+	char *type = "";
+
+	if (!bus) {
+		err("The bus passed in NULL to find resource\n");
+		return -ENODEV;
+	}
+
+	switch (flag) {
+		case IO:
+			res_cur = bus->firstIO;
+			type = "io";
+			break;
+		case MEM:
+			res_cur = bus->firstMem;
+			type = "mem";
+			break;
+		case PFMEM:
+			res_cur = bus->firstPFMem;
+			type = "pfmem";
+			break;
+		default:
+			err("wrong type of flag\n");
+			return -EINVAL;
+	}
+
+	while (res_cur) {
+		if (res_cur->start == start_address) {
+			*res = res_cur;
+			break;
+		}
+		if (res_cur->next)
+			res_cur = res_cur->next;
+		else
+			res_cur = res_cur->nextRange;
+	}
+
+	if (!res_cur) {
+		if (flag == PFMEM) {
+			res_cur = bus->firstPFMemFromMem;
+			while (res_cur) {
+				if (res_cur->start == start_address) {
+					*res = res_cur;
+					break;
+				}
+				res_cur = res_cur->next;
+			}
+			if (!res_cur) {
+				debug("SOS...cannot find %s resource in the bus.\n", type);
+				return -EINVAL;
+			}
+		} else {
+			debug("SOS... cannot find %s resource in the bus.\n", type);
+			return -EINVAL;
+		}
+	}
+
+	if (*res)
+		debug("*res->start = %x\n", (*res)->start);
+
+	return 0;
+}
+
+/***********************************************************************
+ * This routine will free the resource structures used by the
+ * system.  It is called from cleanup routine for the module
+ * Parameters: none
+ * Returns: none
+ ***********************************************************************/
+void ibmphp_free_resources(void)
+{
+	struct bus_node *bus_cur = NULL, *next;
+	struct bus_node *bus_tmp;
+	struct range_node *range_cur;
+	struct range_node *range_tmp;
+	struct resource_node *res_cur;
+	struct resource_node *res_tmp;
+	int i = 0;
+	flags = 1;
+
+	list_for_each_entry_safe(bus_cur, next, &gbuses, bus_list) {
+		if (bus_cur->noIORanges) {
+			range_cur = bus_cur->rangeIO;
+			for (i = 0; i < bus_cur->noIORanges; i++) {
+				if (!range_cur)
+					break;
+				range_tmp = range_cur;
+				range_cur = range_cur->next;
+				kfree(range_tmp);
+				range_tmp = NULL;
+			}
+		}
+		if (bus_cur->noMemRanges) {
+			range_cur = bus_cur->rangeMem;
+			for (i = 0; i < bus_cur->noMemRanges; i++) {
+				if (!range_cur)
+					break;
+				range_tmp = range_cur;
+				range_cur = range_cur->next;
+				kfree(range_tmp);
+				range_tmp = NULL;
+			}
+		}
+		if (bus_cur->noPFMemRanges) {
+			range_cur = bus_cur->rangePFMem;
+			for (i = 0; i < bus_cur->noPFMemRanges; i++) {
+				if (!range_cur)
+					break;
+				range_tmp = range_cur;
+				range_cur = range_cur->next;
+				kfree(range_tmp);
+				range_tmp = NULL;
+			}
+		}
+
+		if (bus_cur->firstIO) {
+			res_cur = bus_cur->firstIO;
+			while (res_cur) {
+				res_tmp = res_cur;
+				if (res_cur->next)
+					res_cur = res_cur->next;
+				else
+					res_cur = res_cur->nextRange;
+				kfree(res_tmp);
+				res_tmp = NULL;
+			}
+			bus_cur->firstIO = NULL;
+		}
+		if (bus_cur->firstMem) {
+			res_cur = bus_cur->firstMem;
+			while (res_cur) {
+				res_tmp = res_cur;
+				if (res_cur->next)
+					res_cur = res_cur->next;
+				else
+					res_cur = res_cur->nextRange;
+				kfree(res_tmp);
+				res_tmp = NULL;
+			}
+			bus_cur->firstMem = NULL;
+		}
+		if (bus_cur->firstPFMem) {
+			res_cur = bus_cur->firstPFMem;
+			while (res_cur) {
+				res_tmp = res_cur;
+				if (res_cur->next)
+					res_cur = res_cur->next;
+				else
+					res_cur = res_cur->nextRange;
+				kfree(res_tmp);
+				res_tmp = NULL;
+			}
+			bus_cur->firstPFMem = NULL;
+		}
+
+		if (bus_cur->firstPFMemFromMem) {
+			res_cur = bus_cur->firstPFMemFromMem;
+			while (res_cur) {
+				res_tmp = res_cur;
+				res_cur = res_cur->next;
+
+				kfree(res_tmp);
+				res_tmp = NULL;
+			}
+			bus_cur->firstPFMemFromMem = NULL;
+		}
+
+		bus_tmp = bus_cur;
+		list_del(&bus_cur->bus_list);
+		kfree(bus_tmp);
+		bus_tmp = NULL;
+	}
+}
+
+/*********************************************************************************
+ * This function will go over the PFmem resources to check if the EBDA allocated
+ * pfmem out of memory buckets of the bus.  If so, it will change the range numbers
+ * and a flag to indicate that this resource is out of memory. It will also move the
+ * Pfmem out of the pfmem resource list to the PFMemFromMem list, and will create
+ * a new Mem node
+ * This routine is called right after initialization
+ *******************************************************************************/
+static int __init once_over(void)
+{
+	struct resource_node *pfmem_cur;
+	struct resource_node *pfmem_prev;
+	struct resource_node *mem;
+	struct bus_node *bus_cur;
+
+	list_for_each_entry(bus_cur, &gbuses, bus_list) {
+		if ((!bus_cur->rangePFMem) && (bus_cur->firstPFMem)) {
+			for (pfmem_cur = bus_cur->firstPFMem, pfmem_prev = NULL; pfmem_cur; pfmem_prev = pfmem_cur, pfmem_cur = pfmem_cur->next) {
+				pfmem_cur->fromMem = 1;
+				if (pfmem_prev)
+					pfmem_prev->next = pfmem_cur->next;
+				else
+					bus_cur->firstPFMem = pfmem_cur->next;
+
+				if (!bus_cur->firstPFMemFromMem)
+					pfmem_cur->next = NULL;
+				else
+					/* we don't need to sort PFMemFromMem since we're using mem node for
+					   all the real work anyways, so just insert at the beginning of the
+					   list
+					 */
+					pfmem_cur->next = bus_cur->firstPFMemFromMem;
+
+				bus_cur->firstPFMemFromMem = pfmem_cur;
+
+				mem = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+				if (!mem)
+					return -ENOMEM;
+
+				mem->type = MEM;
+				mem->busno = pfmem_cur->busno;
+				mem->devfunc = pfmem_cur->devfunc;
+				mem->start = pfmem_cur->start;
+				mem->end = pfmem_cur->end;
+				mem->len = pfmem_cur->len;
+				if (ibmphp_add_resource(mem) < 0)
+					err("Trouble...trouble... EBDA allocated pfmem from mem, but system doesn't display it has this space... unless not PCI device...\n");
+				pfmem_cur->rangeno = mem->rangeno;
+			}	/* end for pfmem */
+		}	/* end if */
+	}	/* end list_for_each bus */
+	return 0;
+}
+
+int ibmphp_add_pfmem_from_mem(struct resource_node *pfmem)
+{
+	struct bus_node *bus_cur = find_bus_wprev(pfmem->busno, NULL, 0);
+
+	if (!bus_cur) {
+		err("cannot find bus of pfmem to add...\n");
+		return -ENODEV;
+	}
+
+	if (bus_cur->firstPFMemFromMem)
+		pfmem->next = bus_cur->firstPFMemFromMem;
+	else
+		pfmem->next = NULL;
+
+	bus_cur->firstPFMemFromMem = pfmem;
+
+	return 0;
+}
+
+/* This routine just goes through the buses to see if the bus already exists.
+ * It is called from ibmphp_find_sec_number, to find out a secondary bus number for
+ * bridged cards
+ * Parameters: bus_number
+ * Returns: Bus pointer or NULL
+ */
+struct bus_node *ibmphp_find_res_bus(u8 bus_number)
+{
+	return find_bus_wprev(bus_number, NULL, 0);
+}
+
+static struct bus_node *find_bus_wprev(u8 bus_number, struct bus_node **prev, u8 flag)
+{
+	struct bus_node *bus_cur;
+
+	list_for_each_entry(bus_cur, &gbuses, bus_list) {
+		if (flag)
+			*prev = list_prev_entry(bus_cur, bus_list);
+		if (bus_cur->busno == bus_number)
+			return bus_cur;
+	}
+
+	return NULL;
+}
+
+void ibmphp_print_test(void)
+{
+	int i = 0;
+	struct bus_node *bus_cur = NULL;
+	struct range_node *range;
+	struct resource_node *res;
+
+	debug_pci("*****************START**********************\n");
+
+	if ((!list_empty(&gbuses)) && flags) {
+		err("The GBUSES is not NULL?!?!?!?!?\n");
+		return;
+	}
+
+	list_for_each_entry(bus_cur, &gbuses, bus_list) {
+		debug_pci ("This is bus # %d.  There are\n", bus_cur->busno);
+		debug_pci ("IORanges = %d\t", bus_cur->noIORanges);
+		debug_pci ("MemRanges = %d\t", bus_cur->noMemRanges);
+		debug_pci ("PFMemRanges = %d\n", bus_cur->noPFMemRanges);
+		debug_pci ("The IO Ranges are as follows:\n");
+		if (bus_cur->rangeIO) {
+			range = bus_cur->rangeIO;
+			for (i = 0; i < bus_cur->noIORanges; i++) {
+				debug_pci("rangeno is %d\n", range->rangeno);
+				debug_pci("[%x - %x]\n", range->start, range->end);
+				range = range->next;
+			}
+		}
+
+		debug_pci("The Mem Ranges are as follows:\n");
+		if (bus_cur->rangeMem) {
+			range = bus_cur->rangeMem;
+			for (i = 0; i < bus_cur->noMemRanges; i++) {
+				debug_pci("rangeno is %d\n", range->rangeno);
+				debug_pci("[%x - %x]\n", range->start, range->end);
+				range = range->next;
+			}
+		}
+
+		debug_pci("The PFMem Ranges are as follows:\n");
+
+		if (bus_cur->rangePFMem) {
+			range = bus_cur->rangePFMem;
+			for (i = 0; i < bus_cur->noPFMemRanges; i++) {
+				debug_pci("rangeno is %d\n", range->rangeno);
+				debug_pci("[%x - %x]\n", range->start, range->end);
+				range = range->next;
+			}
+		}
+
+		debug_pci("The resources on this bus are as follows\n");
+
+		debug_pci("IO...\n");
+		if (bus_cur->firstIO) {
+			res = bus_cur->firstIO;
+			while (res) {
+				debug_pci("The range # is %d\n", res->rangeno);
+				debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+				debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len);
+				if (res->next)
+					res = res->next;
+				else if (res->nextRange)
+					res = res->nextRange;
+				else
+					break;
+			}
+		}
+		debug_pci("Mem...\n");
+		if (bus_cur->firstMem) {
+			res = bus_cur->firstMem;
+			while (res) {
+				debug_pci("The range # is %d\n", res->rangeno);
+				debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+				debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len);
+				if (res->next)
+					res = res->next;
+				else if (res->nextRange)
+					res = res->nextRange;
+				else
+					break;
+			}
+		}
+		debug_pci("PFMem...\n");
+		if (bus_cur->firstPFMem) {
+			res = bus_cur->firstPFMem;
+			while (res) {
+				debug_pci("The range # is %d\n", res->rangeno);
+				debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+				debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len);
+				if (res->next)
+					res = res->next;
+				else if (res->nextRange)
+					res = res->nextRange;
+				else
+					break;
+			}
+		}
+
+		debug_pci("PFMemFromMem...\n");
+		if (bus_cur->firstPFMemFromMem) {
+			res = bus_cur->firstPFMemFromMem;
+			while (res) {
+				debug_pci("The range # is %d\n", res->rangeno);
+				debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+				debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len);
+				res = res->next;
+			}
+		}
+	}
+	debug_pci("***********************END***********************\n");
+}
+
+static int range_exists_already(struct range_node *range, struct bus_node *bus_cur, u8 type)
+{
+	struct range_node *range_cur = NULL;
+	switch (type) {
+		case IO:
+			range_cur = bus_cur->rangeIO;
+			break;
+		case MEM:
+			range_cur = bus_cur->rangeMem;
+			break;
+		case PFMEM:
+			range_cur = bus_cur->rangePFMem;
+			break;
+		default:
+			err("wrong type passed to find out if range already exists\n");
+			return -ENODEV;
+	}
+
+	while (range_cur) {
+		if ((range_cur->start == range->start) && (range_cur->end == range->end))
+			return 1;
+		range_cur = range_cur->next;
+	}
+
+	return 0;
+}
+
+/* This routine will read the windows for any PPB we have and update the
+ * range info for the secondary bus, and will also input this info into
+ * primary bus, since BIOS doesn't. This is for PPB that are in the system
+ * on bootup.  For bridged cards that were added during previous load of the
+ * driver, only the ranges and the bus structure are added, the devices are
+ * added from NVRAM
+ * Input: primary busno
+ * Returns: none
+ * Note: this function doesn't take into account IO restrictions etc,
+ *	 so will only work for bridges with no video/ISA devices behind them It
+ *	 also will not work for onboard PPBs that can have more than 1 *bus
+ *	 behind them All these are TO DO.
+ *	 Also need to add more error checkings... (from fnc returns etc)
+ */
+static int __init update_bridge_ranges(struct bus_node **bus)
+{
+	u8 sec_busno, device, function, hdr_type, start_io_address, end_io_address;
+	u16 vendor_id, upper_io_start, upper_io_end, start_mem_address, end_mem_address;
+	u32 start_address, end_address, upper_start, upper_end;
+	struct bus_node *bus_sec;
+	struct bus_node *bus_cur;
+	struct resource_node *io;
+	struct resource_node *mem;
+	struct resource_node *pfmem;
+	struct range_node *range;
+	unsigned int devfn;
+
+	bus_cur = *bus;
+	if (!bus_cur)
+		return -ENODEV;
+	ibmphp_pci_bus->number = bus_cur->busno;
+
+	debug("inside %s\n", __func__);
+	debug("bus_cur->busno = %x\n", bus_cur->busno);
+
+	for (device = 0; device < 32; device++) {
+		for (function = 0x00; function < 0x08; function++) {
+			devfn = PCI_DEVFN(device, function);
+			pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+			if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+				/* found correct device!!! */
+				pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+
+				switch (hdr_type) {
+					case PCI_HEADER_TYPE_NORMAL:
+						function = 0x8;
+						break;
+					case PCI_HEADER_TYPE_MULTIDEVICE:
+						break;
+					case PCI_HEADER_TYPE_BRIDGE:
+						function = 0x8;
+						fallthrough;
+					case PCI_HEADER_TYPE_MULTIBRIDGE:
+						/* We assume here that only 1 bus behind the bridge
+						   TO DO: add functionality for several:
+						   temp = secondary;
+						   while (temp < subordinate) {
+						   ...
+						   temp++;
+						   }
+						 */
+						pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_busno);
+						bus_sec = find_bus_wprev(sec_busno, NULL, 0);
+						/* this bus structure doesn't exist yet, PPB was configured during previous loading of ibmphp */
+						if (!bus_sec) {
+							alloc_error_bus(NULL, sec_busno, 1);
+							/* the rest will be populated during NVRAM call */
+							return 0;
+						}
+						pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, &start_io_address);
+						pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &end_io_address);
+						pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, &upper_io_start);
+						pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, &upper_io_end);
+						start_address = (start_io_address & PCI_IO_RANGE_MASK) << 8;
+						start_address |= (upper_io_start << 16);
+						end_address = (end_io_address & PCI_IO_RANGE_MASK) << 8;
+						end_address |= (upper_io_end << 16);
+
+						if ((start_address) && (start_address <= end_address)) {
+							range = kzalloc(sizeof(struct range_node), GFP_KERNEL);
+							if (!range)
+								return -ENOMEM;
+
+							range->start = start_address;
+							range->end = end_address + 0xfff;
+
+							if (bus_sec->noIORanges > 0) {
+								if (!range_exists_already(range, bus_sec, IO)) {
+									add_bus_range(IO, range, bus_sec);
+									++bus_sec->noIORanges;
+								} else {
+									kfree(range);
+									range = NULL;
+								}
+							} else {
+								/* 1st IO Range on the bus */
+								range->rangeno = 1;
+								bus_sec->rangeIO = range;
+								++bus_sec->noIORanges;
+							}
+							fix_resources(bus_sec);
+
+							if (ibmphp_find_resource(bus_cur, start_address, &io, IO)) {
+								io = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+								if (!io) {
+									kfree(range);
+									return -ENOMEM;
+								}
+								io->type = IO;
+								io->busno = bus_cur->busno;
+								io->devfunc = ((device << 3) | (function & 0x7));
+								io->start = start_address;
+								io->end = end_address + 0xfff;
+								io->len = io->end - io->start + 1;
+								ibmphp_add_resource(io);
+							}
+						}
+
+						pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &start_mem_address);
+						pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &end_mem_address);
+
+						start_address = 0x00000000 | (start_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+						end_address = 0x00000000 | (end_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+
+						if ((start_address) && (start_address <= end_address)) {
+
+							range = kzalloc(sizeof(struct range_node), GFP_KERNEL);
+							if (!range)
+								return -ENOMEM;
+
+							range->start = start_address;
+							range->end = end_address + 0xfffff;
+
+							if (bus_sec->noMemRanges > 0) {
+								if (!range_exists_already(range, bus_sec, MEM)) {
+									add_bus_range(MEM, range, bus_sec);
+									++bus_sec->noMemRanges;
+								} else {
+									kfree(range);
+									range = NULL;
+								}
+							} else {
+								/* 1st Mem Range on the bus */
+								range->rangeno = 1;
+								bus_sec->rangeMem = range;
+								++bus_sec->noMemRanges;
+							}
+
+							fix_resources(bus_sec);
+
+							if (ibmphp_find_resource(bus_cur, start_address, &mem, MEM)) {
+								mem = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+								if (!mem) {
+									kfree(range);
+									return -ENOMEM;
+								}
+								mem->type = MEM;
+								mem->busno = bus_cur->busno;
+								mem->devfunc = ((device << 3) | (function & 0x7));
+								mem->start = start_address;
+								mem->end = end_address + 0xfffff;
+								mem->len = mem->end - mem->start + 1;
+								ibmphp_add_resource(mem);
+							}
+						}
+						pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &start_mem_address);
+						pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &end_mem_address);
+						pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, &upper_start);
+						pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, &upper_end);
+						start_address = 0x00000000 | (start_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+						end_address = 0x00000000 | (end_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+#if BITS_PER_LONG == 64
+						start_address |= ((long) upper_start) << 32;
+						end_address |= ((long) upper_end) << 32;
+#endif
+
+						if ((start_address) && (start_address <= end_address)) {
+
+							range = kzalloc(sizeof(struct range_node), GFP_KERNEL);
+							if (!range)
+								return -ENOMEM;
+
+							range->start = start_address;
+							range->end = end_address + 0xfffff;
+
+							if (bus_sec->noPFMemRanges > 0) {
+								if (!range_exists_already(range, bus_sec, PFMEM)) {
+									add_bus_range(PFMEM, range, bus_sec);
+									++bus_sec->noPFMemRanges;
+								} else {
+									kfree(range);
+									range = NULL;
+								}
+							} else {
+								/* 1st PFMem Range on the bus */
+								range->rangeno = 1;
+								bus_sec->rangePFMem = range;
+								++bus_sec->noPFMemRanges;
+							}
+
+							fix_resources(bus_sec);
+							if (ibmphp_find_resource(bus_cur, start_address, &pfmem, PFMEM)) {
+								pfmem = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+								if (!pfmem) {
+									kfree(range);
+									return -ENOMEM;
+								}
+								pfmem->type = PFMEM;
+								pfmem->busno = bus_cur->busno;
+								pfmem->devfunc = ((device << 3) | (function & 0x7));
+								pfmem->start = start_address;
+								pfmem->end = end_address + 0xfffff;
+								pfmem->len = pfmem->end - pfmem->start + 1;
+								pfmem->fromMem = 0;
+
+								ibmphp_add_resource(pfmem);
+							}
+						}
+						break;
+				}	/* end of switch */
+			}	/* end if vendor */
+		}	/* end for function */
+	}	/* end for device */
+
+	return 0;
+}