summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/sym53c8xx_2/sym53c8xx.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/scsi/sym53c8xx_2/sym53c8xx.h
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/scsi/sym53c8xx_2/sym53c8xx.h')
-rw-r--r--drivers/scsi/sym53c8xx_2/sym53c8xx.h202
1 files changed, 202 insertions, 0 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
new file mode 100644
index 000000000..11f5dc29a
--- /dev/null
+++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
+ * of PCI-SCSI IO processors.
+ *
+ * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
+ *
+ * This driver is derived from the Linux sym53c8xx driver.
+ * Copyright (C) 1998-2000 Gerard Roudier
+ *
+ * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
+ * a port of the FreeBSD ncr driver to Linux-1.2.13.
+ *
+ * The original ncr driver has been written for 386bsd and FreeBSD by
+ * Wolfgang Stanglmeier <wolf@cologne.de>
+ * Stefan Esser <se@mi.Uni-Koeln.de>
+ * Copyright (C) 1994 Wolfgang Stanglmeier
+ *
+ * Other major contributions:
+ *
+ * NVRAM detection and reading.
+ * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+#ifndef SYM53C8XX_H
+#define SYM53C8XX_H
+
+
+/*
+ * DMA addressing mode.
+ *
+ * 0 : 32 bit addressing for all chips.
+ * 1 : 40 bit addressing when supported by chip.
+ * 2 : 64 bit addressing when supported by chip,
+ * limited to 16 segments of 4 GB -> 64 GB max.
+ */
+#define SYM_CONF_DMA_ADDRESSING_MODE CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
+
+/*
+ * NVRAM support.
+ */
+#if 1
+#define SYM_CONF_NVRAM_SUPPORT (1)
+#endif
+
+/*
+ * These options are not tunable from 'make config'
+ */
+#if 1
+#define SYM_LINUX_PROC_INFO_SUPPORT
+#define SYM_LINUX_USER_COMMAND_SUPPORT
+#define SYM_LINUX_USER_INFO_SUPPORT
+#define SYM_LINUX_DEBUG_CONTROL_SUPPORT
+#endif
+
+/*
+ * Also handle old NCR chips if not (0).
+ */
+#define SYM_CONF_GENERIC_SUPPORT (1)
+
+/*
+ * Allow tags from 2 to 256, default 8
+ */
+#ifndef CONFIG_SCSI_SYM53C8XX_MAX_TAGS
+#define CONFIG_SCSI_SYM53C8XX_MAX_TAGS (8)
+#endif
+
+#if CONFIG_SCSI_SYM53C8XX_MAX_TAGS < 2
+#define SYM_CONF_MAX_TAG (2)
+#elif CONFIG_SCSI_SYM53C8XX_MAX_TAGS > 256
+#define SYM_CONF_MAX_TAG (256)
+#else
+#define SYM_CONF_MAX_TAG CONFIG_SCSI_SYM53C8XX_MAX_TAGS
+#endif
+
+#ifndef CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS
+#define CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS SYM_CONF_MAX_TAG
+#endif
+
+/*
+ * Anyway, we configure the driver for at least 64 tags per LUN. :)
+ */
+#if SYM_CONF_MAX_TAG <= 64
+#define SYM_CONF_MAX_TAG_ORDER (6)
+#elif SYM_CONF_MAX_TAG <= 128
+#define SYM_CONF_MAX_TAG_ORDER (7)
+#else
+#define SYM_CONF_MAX_TAG_ORDER (8)
+#endif
+
+/*
+ * Max number of SG entries.
+ */
+#define SYM_CONF_MAX_SG (96)
+
+/*
+ * Driver setup structure.
+ *
+ * This structure is initialized from linux config options.
+ * It can be overridden at boot-up by the boot command line.
+ */
+struct sym_driver_setup {
+ u_short max_tag;
+ u_char burst_order;
+ u_char scsi_led;
+ u_char scsi_diff;
+ u_char irq_mode;
+ u_char scsi_bus_check;
+ u_char host_id;
+
+ u_char verbose;
+ u_char settle_delay;
+ u_char use_nvram;
+ u_long excludes[8];
+};
+
+#define SYM_SETUP_MAX_TAG sym_driver_setup.max_tag
+#define SYM_SETUP_BURST_ORDER sym_driver_setup.burst_order
+#define SYM_SETUP_SCSI_LED sym_driver_setup.scsi_led
+#define SYM_SETUP_SCSI_DIFF sym_driver_setup.scsi_diff
+#define SYM_SETUP_IRQ_MODE sym_driver_setup.irq_mode
+#define SYM_SETUP_SCSI_BUS_CHECK sym_driver_setup.scsi_bus_check
+#define SYM_SETUP_HOST_ID sym_driver_setup.host_id
+#define boot_verbose sym_driver_setup.verbose
+
+/*
+ * Initial setup.
+ *
+ * Can be overriden at startup by a command line.
+ */
+#define SYM_LINUX_DRIVER_SETUP { \
+ .max_tag = CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS, \
+ .burst_order = 7, \
+ .scsi_led = 1, \
+ .scsi_diff = 1, \
+ .irq_mode = 0, \
+ .scsi_bus_check = 1, \
+ .host_id = 7, \
+ .verbose = 0, \
+ .settle_delay = 3, \
+ .use_nvram = 1, \
+}
+
+extern struct sym_driver_setup sym_driver_setup;
+extern unsigned int sym_debug_flags;
+#define DEBUG_FLAGS sym_debug_flags
+
+/*
+ * Max number of targets.
+ * Maximum is 16 and you are advised not to change this value.
+ */
+#ifndef SYM_CONF_MAX_TARGET
+#define SYM_CONF_MAX_TARGET (16)
+#endif
+
+/*
+ * Max number of logical units.
+ * SPI-2 allows up to 64 logical units, but in real life, target
+ * that implements more that 7 logical units are pretty rare.
+ * Anyway, the cost of accepting up to 64 logical unit is low in
+ * this driver, thus going with the maximum is acceptable.
+ */
+#ifndef SYM_CONF_MAX_LUN
+#define SYM_CONF_MAX_LUN (64)
+#endif
+
+/*
+ * Max number of IO control blocks queued to the controller.
+ * Each entry needs 8 bytes and the queues are allocated contiguously.
+ * Since we donnot want to allocate more than a page, the theorical
+ * maximum is PAGE_SIZE/8. For safety, we announce a bit less to the
+ * access method. :)
+ * When not supplied, as it is suggested, the driver compute some
+ * good value for this parameter.
+ */
+/* #define SYM_CONF_MAX_START (PAGE_SIZE/8 - 16) */
+
+/*
+ * Support for Immediate Arbitration.
+ * Not advised.
+ */
+/* #define SYM_CONF_IARB_SUPPORT */
+
+/*
+ * Only relevant if IARB support configured.
+ * - Max number of successive settings of IARB hints.
+ * - Set IARB on arbitration lost.
+ */
+#define SYM_CONF_IARB_MAX 3
+#define SYM_CONF_SET_IARB_ON_ARB_LOST 1
+
+/*
+ * Returning wrong residuals may make problems.
+ * When zero, this define tells the driver to
+ * always return 0 as transfer residual.
+ * Btw, all my testings of residuals have succeeded.
+ */
+#define SYM_SETUP_RESIDUAL_SUPPORT 1
+
+#endif /* SYM53C8XX_H */