diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/scsi/sym53c8xx_2/sym_fw1.h | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/scsi/sym53c8xx_2/sym_fw1.h')
-rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_fw1.h | 1777 |
1 files changed, 1777 insertions, 0 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h new file mode 100644 index 000000000..d98ec67f0 --- /dev/null +++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h @@ -0,0 +1,1777 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family + * of PCI-SCSI IO processors. + * + * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> + * + * This driver is derived from the Linux sym53c8xx driver. + * Copyright (C) 1998-2000 Gerard Roudier + * + * The sym53c8xx driver is derived from the ncr53c8xx driver that had been + * a port of the FreeBSD ncr driver to Linux-1.2.13. + * + * The original ncr driver has been written for 386bsd and FreeBSD by + * Wolfgang Stanglmeier <wolf@cologne.de> + * Stefan Esser <se@mi.Uni-Koeln.de> + * Copyright (C) 1994 Wolfgang Stanglmeier + * + * Other major contributions: + * + * NVRAM detection and reading. + * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> + * + *----------------------------------------------------------------------------- + */ + +/* + * Scripts for SYMBIOS-Processor + * + * We have to know the offsets of all labels before we reach + * them (for forward jumps). Therefore we declare a struct + * here. If you make changes inside the script, + * + * DONT FORGET TO CHANGE THE LENGTHS HERE! + */ + +/* + * Script fragments which are loaded into the on-chip RAM + * of 825A, 875, 876, 895, 895A, 896 and 1010 chips. + * Must not exceed 4K bytes. + */ +struct SYM_FWA_SCR { + u32 start [ 11]; + u32 getjob_begin [ 4]; + u32 _sms_a10 [ 5]; + u32 getjob_end [ 4]; + u32 _sms_a20 [ 4]; +#ifdef SYM_CONF_TARGET_ROLE_SUPPORT + u32 select [ 8]; +#else + u32 select [ 6]; +#endif + u32 _sms_a30 [ 5]; + u32 wf_sel_done [ 2]; + u32 send_ident [ 2]; +#ifdef SYM_CONF_IARB_SUPPORT + u32 select2 [ 8]; +#else + u32 select2 [ 2]; +#endif + u32 command [ 2]; + u32 dispatch [ 28]; + u32 sel_no_cmd [ 10]; + u32 init [ 6]; + u32 clrack [ 4]; + u32 datai_done [ 11]; + u32 datai_done_wsr [ 20]; + u32 datao_done [ 11]; + u32 datao_done_wss [ 6]; + u32 datai_phase [ 5]; + u32 datao_phase [ 5]; + u32 msg_in [ 2]; + u32 msg_in2 [ 10]; +#ifdef SYM_CONF_IARB_SUPPORT + u32 status [ 14]; +#else + u32 status [ 10]; +#endif + u32 complete [ 6]; + u32 complete2 [ 8]; + u32 _sms_a40 [ 12]; + u32 done [ 5]; + u32 _sms_a50 [ 5]; + u32 _sms_a60 [ 2]; + u32 done_end [ 4]; + u32 complete_error [ 5]; + u32 save_dp [ 11]; + u32 restore_dp [ 7]; + u32 disconnect [ 11]; + u32 disconnect2 [ 5]; + u32 _sms_a65 [ 3]; +#ifdef SYM_CONF_IARB_SUPPORT + u32 idle [ 4]; +#else + u32 idle [ 2]; +#endif +#ifdef SYM_CONF_IARB_SUPPORT + u32 ungetjob [ 7]; +#else + u32 ungetjob [ 5]; +#endif +#ifdef SYM_CONF_TARGET_ROLE_SUPPORT + u32 reselect [ 4]; +#else + u32 reselect [ 2]; +#endif + u32 reselected [ 19]; + u32 _sms_a70 [ 6]; + u32 _sms_a80 [ 4]; + u32 reselected1 [ 25]; + u32 _sms_a90 [ 4]; + u32 resel_lun0 [ 7]; + u32 _sms_a100 [ 4]; + u32 resel_tag [ 8]; +#if SYM_CONF_MAX_TASK*4 > 512 + u32 _sms_a110 [ 23]; +#elif SYM_CONF_MAX_TASK*4 > 256 + u32 _sms_a110 [ 17]; +#else + u32 _sms_a110 [ 13]; +#endif + u32 _sms_a120 [ 2]; + u32 resel_go [ 4]; + u32 _sms_a130 [ 7]; + u32 resel_dsa [ 2]; + u32 resel_dsa1 [ 4]; + u32 _sms_a140 [ 7]; + u32 resel_no_tag [ 4]; + u32 _sms_a145 [ 7]; + u32 data_in [SYM_CONF_MAX_SG * 2]; + u32 data_in2 [ 4]; + u32 data_out [SYM_CONF_MAX_SG * 2]; + u32 data_out2 [ 4]; + u32 pm0_data [ 12]; + u32 pm0_data_out [ 6]; + u32 pm0_data_end [ 7]; + u32 pm_data_end [ 4]; + u32 _sms_a150 [ 4]; + u32 pm1_data [ 12]; + u32 pm1_data_out [ 6]; + u32 pm1_data_end [ 9]; +}; + +/* + * Script fragments which stay in main memory for all chips + * except for chips that support 8K on-chip RAM. + */ +struct SYM_FWB_SCR { + u32 no_data [ 2]; +#ifdef SYM_CONF_TARGET_ROLE_SUPPORT + u32 sel_for_abort [ 18]; +#else + u32 sel_for_abort [ 16]; +#endif + u32 sel_for_abort_1 [ 2]; + u32 msg_in_etc [ 12]; + u32 msg_received [ 5]; + u32 msg_weird_seen [ 5]; + u32 msg_extended [ 17]; + u32 _sms_b10 [ 4]; + u32 msg_bad [ 6]; + u32 msg_weird [ 4]; + u32 msg_weird1 [ 8]; + u32 wdtr_resp [ 6]; + u32 send_wdtr [ 4]; + u32 sdtr_resp [ 6]; + u32 send_sdtr [ 4]; + u32 ppr_resp [ 6]; + u32 send_ppr [ 4]; + u32 nego_bad_phase [ 4]; + u32 msg_out [ 4]; + u32 msg_out_done [ 4]; + u32 data_ovrun [ 3]; + u32 data_ovrun1 [ 22]; + u32 data_ovrun2 [ 8]; + u32 abort_resel [ 16]; + u32 resend_ident [ 4]; + u32 ident_break [ 4]; + u32 ident_break_atn [ 4]; + u32 sdata_in [ 6]; + u32 resel_bad_lun [ 4]; + u32 bad_i_t_l [ 4]; + u32 bad_i_t_l_q [ 4]; + u32 bad_status [ 7]; + u32 wsr_ma_helper [ 4]; + + /* Data area */ + u32 zero [ 1]; + u32 scratch [ 1]; + u32 scratch1 [ 1]; + u32 prev_done [ 1]; + u32 done_pos [ 1]; + u32 nextjob [ 1]; + u32 startpos [ 1]; + u32 targtbl [ 1]; +}; + +/* + * Script fragments used at initialisations. + * Only runs out of main memory. + */ +struct SYM_FWZ_SCR { + u32 snooptest [ 9]; + u32 snoopend [ 2]; +}; + +static struct SYM_FWA_SCR SYM_FWA_SCR = { +/*--------------------------< START >----------------------------*/ { + /* + * Switch the LED on. + * Will be patched with a NO_OP if LED + * not needed or not desired. + */ + SCR_REG_REG (gpreg, SCR_AND, 0xfe), + 0, + /* + * Clear SIGP. + */ + SCR_FROM_REG (ctest2), + 0, + /* + * Stop here if the C code wants to perform + * some error recovery procedure manually. + * (Indicate this by setting SEM in ISTAT) + */ + SCR_FROM_REG (istat), + 0, + /* + * Report to the C code the next position in + * the start queue the SCRIPTS will schedule. + * The C code must not change SCRATCHA. + */ + SCR_COPY (4), + PADDR_B (startpos), + RADDR_1 (scratcha), + SCR_INT ^ IFTRUE (MASK (SEM, SEM)), + SIR_SCRIPT_STOPPED, + /* + * Start the next job. + * + * @DSA = start point for this job. + * SCRATCHA = address of this job in the start queue. + * + * We will restore startpos with SCRATCHA if we fails the + * arbitration or if it is the idle job. + * + * The below GETJOB_BEGIN to GETJOB_END section of SCRIPTS + * is a critical path. If it is partially executed, it then + * may happen that the job address is not yet in the DSA + * and the next queue position points to the next JOB. + */ +}/*-------------------------< GETJOB_BEGIN >---------------------*/,{ + /* + * Copy to a fixed location both the next STARTPOS + * and the current JOB address, using self modifying + * SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (scratcha), + PADDR_A (_sms_a10), + SCR_COPY (8), +}/*-------------------------< _SMS_A10 >-------------------------*/,{ + 0, + PADDR_B (nextjob), + /* + * Move the start address to TEMP using self- + * modifying SCRIPTS and jump indirectly to + * that address. + */ + SCR_COPY (4), + PADDR_B (nextjob), + RADDR_1 (dsa), +}/*-------------------------< GETJOB_END >-----------------------*/,{ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a20), + SCR_COPY (4), +}/*-------------------------< _SMS_A20 >-------------------------*/,{ + 0, + RADDR_1 (temp), + SCR_RETURN, + 0, +}/*-------------------------< SELECT >---------------------------*/,{ + /* + * DSA contains the address of a scheduled + * data structure. + * + * SCRATCHA contains the address of the start queue + * entry which points to the next job. + * + * Set Initiator mode. + * + * (Target mode is left as an exercise for the reader) + */ +#ifdef SYM_CONF_TARGET_ROLE_SUPPORT + SCR_CLR (SCR_TRG), + 0, +#endif + /* + * And try to select this target. + */ + SCR_SEL_TBL_ATN ^ offsetof (struct sym_dsb, select), + PADDR_A (ungetjob), + /* + * Now there are 4 possibilities: + * + * (1) The chip loses arbitration. + * This is ok, because it will try again, + * when the bus becomes idle. + * (But beware of the timeout function!) + * + * (2) The chip is reselected. + * Then the script processor takes the jump + * to the RESELECT label. + * + * (3) The chip wins arbitration. + * Then it will execute SCRIPTS instruction until + * the next instruction that checks SCSI phase. + * Then will stop and wait for selection to be + * complete or selection time-out to occur. + * + * After having won arbitration, the SCRIPTS + * processor is able to execute instructions while + * the SCSI core is performing SCSI selection. + */ + + /* + * Copy the CCB header to a fixed location + * in the HCB using self-modifying SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a30), + SCR_COPY (sizeof(struct sym_ccbh)), +}/*-------------------------< _SMS_A30 >-------------------------*/,{ + 0, + HADDR_1 (ccb_head), + /* + * Initialize the status register + */ + SCR_COPY (4), + HADDR_1 (ccb_head.status), + RADDR_1 (scr0), +}/*-------------------------< WF_SEL_DONE >----------------------*/,{ + SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), + SIR_SEL_ATN_NO_MSG_OUT, +}/*-------------------------< SEND_IDENT >-----------------------*/,{ + /* + * Selection complete. + * Send the IDENTIFY and possibly the TAG message + * and negotiation message if present. + */ + SCR_MOVE_TBL ^ SCR_MSG_OUT, + offsetof (struct sym_dsb, smsg), +}/*-------------------------< SELECT2 >--------------------------*/,{ +#ifdef SYM_CONF_IARB_SUPPORT + /* + * Set IMMEDIATE ARBITRATION if we have been given + * a hint to do so. (Some job to do after this one). + */ + SCR_FROM_REG (HF_REG), + 0, + SCR_JUMPR ^ IFFALSE (MASK (HF_HINT_IARB, HF_HINT_IARB)), + 8, + SCR_REG_REG (scntl1, SCR_OR, IARB), + 0, +#endif + /* + * Anticipate the COMMAND phase. + * This is the PHASE we expect at this point. + */ + SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)), + PADDR_A (sel_no_cmd), +}/*-------------------------< COMMAND >--------------------------*/,{ + /* + * ... and send the command + */ + SCR_MOVE_TBL ^ SCR_COMMAND, + offsetof (struct sym_dsb, cmd), +}/*-------------------------< DISPATCH >-------------------------*/,{ + /* + * MSG_IN is the only phase that shall be + * entered at least once for each (re)selection. + * So we test it first. + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), + PADDR_A (msg_in), + SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT)), + PADDR_A (datao_phase), + SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN)), + PADDR_A (datai_phase), + SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), + PADDR_A (status), + SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), + PADDR_A (command), + SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), + PADDR_B (msg_out), + /* + * Discard as many illegal phases as + * required and tell the C code about. + */ + SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_OUT)), + 16, + SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, + HADDR_1 (scratch), + SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_OUT)), + -16, + SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_IN)), + 16, + SCR_MOVE_ABS (1) ^ SCR_ILG_IN, + HADDR_1 (scratch), + SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_IN)), + -16, + SCR_INT, + SIR_BAD_PHASE, + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< SEL_NO_CMD >-----------------------*/,{ + /* + * The target does not switch to command + * phase after IDENTIFY has been sent. + * + * If it stays in MSG OUT phase send it + * the IDENTIFY again. + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), + PADDR_B (resend_ident), + /* + * If target does not switch to MSG IN phase + * and we sent a negotiation, assert the + * failure immediately. + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), + PADDR_A (dispatch), + SCR_FROM_REG (HS_REG), + 0, + SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), + SIR_NEGO_FAILED, + /* + * Jump to dispatcher. + */ + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< INIT >-----------------------------*/,{ + /* + * Wait for the SCSI RESET signal to be + * inactive before restarting operations, + * since the chip may hang on SEL_ATN + * if SCSI RESET is active. + */ + SCR_FROM_REG (sstat0), + 0, + SCR_JUMPR ^ IFTRUE (MASK (IRST, IRST)), + -16, + SCR_JUMP, + PADDR_A (start), +}/*-------------------------< CLRACK >---------------------------*/,{ + /* + * Terminate possible pending message phase. + */ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DATAI_DONE >-----------------------*/,{ + /* + * Save current pointer to LASTP. + */ + SCR_COPY (4), + RADDR_1 (temp), + HADDR_1 (ccb_head.lastp), + /* + * If the SWIDE is not full, jump to dispatcher. + * We anticipate a STATUS phase. + */ + SCR_FROM_REG (scntl2), + 0, + SCR_JUMP ^ IFTRUE (MASK (WSR, WSR)), + PADDR_A (datai_done_wsr), + SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), + PADDR_A (status), + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DATAI_DONE_WSR >-------------------*/,{ + /* + * The SWIDE is full. + * Clear this condition. + */ + SCR_REG_REG (scntl2, SCR_OR, WSR), + 0, + /* + * We are expecting an IGNORE RESIDUE message + * from the device, otherwise we are in data + * overrun condition. Check against MSG_IN phase. + */ + SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), + SIR_SWIDE_OVERRUN, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR_A (dispatch), + /* + * We are in MSG_IN phase, + * Read the first byte of the message. + * If it is not an IGNORE RESIDUE message, + * signal overrun and jump to message + * processing. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (msgin[0]), + SCR_INT ^ IFFALSE (DATA (M_IGN_RESIDUE)), + SIR_SWIDE_OVERRUN, + SCR_JUMP ^ IFFALSE (DATA (M_IGN_RESIDUE)), + PADDR_A (msg_in2), + /* + * We got the message we expected. + * Read the 2nd byte, and jump to dispatcher. + */ + SCR_CLR (SCR_ACK), + 0, + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (msgin[1]), + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DATAO_DONE >-----------------------*/,{ + /* + * Save current pointer to LASTP. + */ + SCR_COPY (4), + RADDR_1 (temp), + HADDR_1 (ccb_head.lastp), + /* + * If the SODL is not full jump to dispatcher. + * We anticipate a STATUS phase. + */ + SCR_FROM_REG (scntl2), + 0, + SCR_JUMP ^ IFTRUE (MASK (WSS, WSS)), + PADDR_A (datao_done_wss), + SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), + PADDR_A (status), + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DATAO_DONE_WSS >-------------------*/,{ + /* + * The SODL is full, clear this condition. + */ + SCR_REG_REG (scntl2, SCR_OR, WSS), + 0, + /* + * And signal a DATA UNDERRUN condition + * to the C code. + */ + SCR_INT, + SIR_SODL_UNDERRUN, + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DATAI_PHASE >----------------------*/,{ + /* + * Jump to current pointer. + */ + SCR_COPY (4), + HADDR_1 (ccb_head.lastp), + RADDR_1 (temp), + SCR_RETURN, + 0, +}/*-------------------------< DATAO_PHASE >----------------------*/,{ + /* + * Jump to current pointer. + */ + SCR_COPY (4), + HADDR_1 (ccb_head.lastp), + RADDR_1 (temp), + SCR_RETURN, + 0, +}/*-------------------------< MSG_IN >---------------------------*/,{ + /* + * Get the first byte of the message. + * + * The script processor doesn't negate the + * ACK signal after this transfer. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (msgin[0]), +}/*-------------------------< MSG_IN2 >--------------------------*/,{ + /* + * Check first against 1 byte messages + * that we handle from SCRIPTS. + */ + SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)), + PADDR_A (complete), + SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)), + PADDR_A (disconnect), + SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)), + PADDR_A (save_dp), + SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)), + PADDR_A (restore_dp), + /* + * We handle all other messages from the + * C code, so no need to waste on-chip RAM + * for those ones. + */ + SCR_JUMP, + PADDR_B (msg_in_etc), +}/*-------------------------< STATUS >---------------------------*/,{ + /* + * get the status + */ + SCR_MOVE_ABS (1) ^ SCR_STATUS, + HADDR_1 (scratch), +#ifdef SYM_CONF_IARB_SUPPORT + /* + * If STATUS is not GOOD, clear IMMEDIATE ARBITRATION, + * since we may have to tamper the start queue from + * the C code. + */ + SCR_JUMPR ^ IFTRUE (DATA (S_GOOD)), + 8, + SCR_REG_REG (scntl1, SCR_AND, ~IARB), + 0, +#endif + /* + * save status to scsi_status. + * mark as complete. + */ + SCR_TO_REG (SS_REG), + 0, + SCR_LOAD_REG (HS_REG, HS_COMPLETE), + 0, + /* + * Anticipate the MESSAGE PHASE for + * the TASK COMPLETE message. + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), + PADDR_A (msg_in), + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< COMPLETE >-------------------------*/,{ + /* + * Complete message. + * + * When we terminate the cycle by clearing ACK, + * the target may disconnect immediately. + * + * We don't want to be told of an "unexpected disconnect", + * so we disable this feature. + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + /* + * Terminate cycle ... + */ + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + /* + * ... and wait for the disconnect. + */ + SCR_WAIT_DISC, + 0, +}/*-------------------------< COMPLETE2 >------------------------*/,{ + /* + * Save host status. + */ + SCR_COPY (4), + RADDR_1 (scr0), + HADDR_1 (ccb_head.status), + /* + * Move back the CCB header using self-modifying + * SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a40), + SCR_COPY (sizeof(struct sym_ccbh)), + HADDR_1 (ccb_head), +}/*-------------------------< _SMS_A40 >-------------------------*/,{ + 0, + /* + * Some bridges may reorder DMA writes to memory. + * We donnot want the CPU to deal with completions + * without all the posted write having been flushed + * to memory. This DUMMY READ should flush posted + * buffers prior to the CPU having to deal with + * completions. + */ + SCR_COPY (4), /* DUMMY READ */ + HADDR_1 (ccb_head.status), + RADDR_1 (scr0), + /* + * If command resulted in not GOOD status, + * call the C code if needed. + */ + SCR_FROM_REG (SS_REG), + 0, + SCR_CALL ^ IFFALSE (DATA (S_GOOD)), + PADDR_B (bad_status), + /* + * If we performed an auto-sense, call + * the C code to synchronyze task aborts + * with UNIT ATTENTION conditions. + */ + SCR_FROM_REG (HF_REG), + 0, + SCR_JUMP ^ IFFALSE (MASK (0 ,(HF_SENSE|HF_EXT_ERR))), + PADDR_A (complete_error), +}/*-------------------------< DONE >-----------------------------*/,{ + /* + * Copy the DSA to the DONE QUEUE and + * signal completion to the host. + * If we are interrupted between DONE + * and DONE_END, we must reset, otherwise + * the completed CCB may be lost. + */ + SCR_COPY (4), + PADDR_B (done_pos), + PADDR_A (_sms_a50), + SCR_COPY (4), + RADDR_1 (dsa), +}/*-------------------------< _SMS_A50 >-------------------------*/,{ + 0, + SCR_COPY (4), + PADDR_B (done_pos), + PADDR_A (_sms_a60), + /* + * The instruction below reads the DONE QUEUE next + * free position from memory. + * In addition it ensures that all PCI posted writes + * are flushed and so the DSA value of the done + * CCB is visible by the CPU before INTFLY is raised. + */ + SCR_COPY (8), +}/*-------------------------< _SMS_A60 >-------------------------*/,{ + 0, + PADDR_B (prev_done), +}/*-------------------------< DONE_END >-------------------------*/,{ + SCR_INT_FLY, + 0, + SCR_JUMP, + PADDR_A (start), +}/*-------------------------< COMPLETE_ERROR >-------------------*/,{ + SCR_COPY (4), + PADDR_B (startpos), + RADDR_1 (scratcha), + SCR_INT, + SIR_COMPLETE_ERROR, +}/*-------------------------< SAVE_DP >--------------------------*/,{ + /* + * Clear ACK immediately. + * No need to delay it. + */ + SCR_CLR (SCR_ACK), + 0, + /* + * Keep track we received a SAVE DP, so + * we will switch to the other PM context + * on the next PM since the DP may point + * to the current PM context. + */ + SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED), + 0, + /* + * SAVE_DP message: + * Copy LASTP to SAVEP. + */ + SCR_COPY (4), + HADDR_1 (ccb_head.lastp), + HADDR_1 (ccb_head.savep), + /* + * Anticipate the MESSAGE PHASE for + * the DISCONNECT message. + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), + PADDR_A (msg_in), + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< RESTORE_DP >-----------------------*/,{ + /* + * Clear ACK immediately. + * No need to delay it. + */ + SCR_CLR (SCR_ACK), + 0, + /* + * Copy SAVEP to LASTP. + */ + SCR_COPY (4), + HADDR_1 (ccb_head.savep), + HADDR_1 (ccb_head.lastp), + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DISCONNECT >-----------------------*/,{ + /* + * DISCONNECTing ... + * + * disable the "unexpected disconnect" feature, + * and remove the ACK signal. + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + /* + * Wait for the disconnect. + */ + SCR_WAIT_DISC, + 0, + /* + * Status is: DISCONNECTED. + */ + SCR_LOAD_REG (HS_REG, HS_DISCONNECT), + 0, + /* + * Save host status. + */ + SCR_COPY (4), + RADDR_1 (scr0), + HADDR_1 (ccb_head.status), +}/*-------------------------< DISCONNECT2 >----------------------*/,{ + /* + * Move back the CCB header using self-modifying + * SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a65), + SCR_COPY (sizeof(struct sym_ccbh)), + HADDR_1 (ccb_head), +}/*-------------------------< _SMS_A65 >-------------------------*/,{ + 0, + SCR_JUMP, + PADDR_A (start), +}/*-------------------------< IDLE >-----------------------------*/,{ + /* + * Nothing to do? + * Switch the LED off and wait for reselect. + * Will be patched with a NO_OP if LED + * not needed or not desired. + */ + SCR_REG_REG (gpreg, SCR_OR, 0x01), + 0, +#ifdef SYM_CONF_IARB_SUPPORT + SCR_JUMPR, + 8, +#endif +}/*-------------------------< UNGETJOB >-------------------------*/,{ +#ifdef SYM_CONF_IARB_SUPPORT + /* + * Set IMMEDIATE ARBITRATION, for the next time. + * This will give us better chance to win arbitration + * for the job we just wanted to do. + */ + SCR_REG_REG (scntl1, SCR_OR, IARB), + 0, +#endif + /* + * We are not able to restart the SCRIPTS if we are + * interrupted and these instruction haven't been + * all executed. BTW, this is very unlikely to + * happen, but we check that from the C code. + */ + SCR_LOAD_REG (dsa, 0xff), + 0, + SCR_COPY (4), + RADDR_1 (scratcha), + PADDR_B (startpos), +}/*-------------------------< RESELECT >-------------------------*/,{ +#ifdef SYM_CONF_TARGET_ROLE_SUPPORT + /* + * Make sure we are in initiator mode. + */ + SCR_CLR (SCR_TRG), + 0, +#endif + /* + * Sleep waiting for a reselection. + */ + SCR_WAIT_RESEL, + PADDR_A(start), +}/*-------------------------< RESELECTED >-----------------------*/,{ + /* + * Switch the LED on. + * Will be patched with a NO_OP if LED + * not needed or not desired. + */ + SCR_REG_REG (gpreg, SCR_AND, 0xfe), + 0, + /* + * load the target id into the sdid + */ + SCR_REG_SFBR (ssid, SCR_AND, 0x8F), + 0, + SCR_TO_REG (sdid), + 0, + /* + * Load the target control block address + */ + SCR_COPY (4), + PADDR_B (targtbl), + RADDR_1 (dsa), + SCR_SFBR_REG (dsa, SCR_SHL, 0), + 0, + SCR_REG_REG (dsa, SCR_SHL, 0), + 0, + SCR_REG_REG (dsa, SCR_AND, 0x3c), + 0, + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a70), + SCR_COPY (4), +}/*-------------------------< _SMS_A70 >-------------------------*/,{ + 0, + RADDR_1 (dsa), + /* + * Copy the TCB header to a fixed place in + * the HCB. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a80), + SCR_COPY (sizeof(struct sym_tcbh)), +}/*-------------------------< _SMS_A80 >-------------------------*/,{ + 0, + HADDR_1 (tcb_head), + /* + * We expect MESSAGE IN phase. + * If not, get help from the C code. + */ + SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), + SIR_RESEL_NO_MSG_IN, +}/*-------------------------< RESELECTED1 >----------------------*/,{ + /* + * Load the synchronous transfer registers. + */ + SCR_COPY (1), + HADDR_1 (tcb_head.wval), + RADDR_1 (scntl3), + SCR_COPY (1), + HADDR_1 (tcb_head.sval), + RADDR_1 (sxfer), + /* + * Get the IDENTIFY message. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (msgin), + /* + * If IDENTIFY LUN #0, use a faster path + * to find the LCB structure. + */ + SCR_JUMP ^ IFTRUE (MASK (0x80, 0xbf)), + PADDR_A (resel_lun0), + /* + * If message isn't an IDENTIFY, + * tell the C code about. + */ + SCR_INT ^ IFFALSE (MASK (0x80, 0x80)), + SIR_RESEL_NO_IDENTIFY, + /* + * It is an IDENTIFY message, + * Load the LUN control block address. + */ + SCR_COPY (4), + HADDR_1 (tcb_head.luntbl_sa), + RADDR_1 (dsa), + SCR_SFBR_REG (dsa, SCR_SHL, 0), + 0, + SCR_REG_REG (dsa, SCR_SHL, 0), + 0, + SCR_REG_REG (dsa, SCR_AND, 0xfc), + 0, + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a90), + SCR_COPY (4), +}/*-------------------------< _SMS_A90 >-------------------------*/,{ + 0, + RADDR_1 (dsa), + SCR_JUMPR, + 12, +}/*-------------------------< RESEL_LUN0 >-----------------------*/,{ + /* + * LUN 0 special case (but usual one :)) + */ + SCR_COPY (4), + HADDR_1 (tcb_head.lun0_sa), + RADDR_1 (dsa), + /* + * Jump indirectly to the reselect action for this LUN. + * (lcb.head.resel_sa assumed at offset zero of lcb). + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a100), + SCR_COPY (4), +}/*-------------------------< _SMS_A100 >------------------------*/,{ + 0, + RADDR_1 (temp), + SCR_RETURN, + 0, + /* In normal situations, we jump to RESEL_TAG or RESEL_NO_TAG */ +}/*-------------------------< RESEL_TAG >------------------------*/,{ + /* + * ACK the IDENTIFY previously received. + */ + SCR_CLR (SCR_ACK), + 0, + /* + * It shall be a tagged command. + * Read SIMPLE+TAG. + * The C code will deal with errors. + * Aggressive optimization, isn't it? :) + */ + SCR_MOVE_ABS (2) ^ SCR_MSG_IN, + HADDR_1 (msgin), + /* + * Copy the LCB header to a fixed place in + * the HCB using self-modifying SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a110), + SCR_COPY (sizeof(struct sym_lcbh)), +}/*-------------------------< _SMS_A110 >------------------------*/,{ + 0, + HADDR_1 (lcb_head), + /* + * Load the pointer to the tagged task + * table for this LUN. + */ + SCR_COPY (4), + HADDR_1 (lcb_head.itlq_tbl_sa), + RADDR_1 (dsa), + /* + * The SIDL still contains the TAG value. + * Aggressive optimization, isn't it? :):) + */ + SCR_REG_SFBR (sidl, SCR_SHL, 0), + 0, +#if SYM_CONF_MAX_TASK*4 > 512 + SCR_JUMPR ^ IFFALSE (CARRYSET), + 8, + SCR_REG_REG (dsa1, SCR_OR, 2), + 0, + SCR_REG_REG (sfbr, SCR_SHL, 0), + 0, + SCR_JUMPR ^ IFFALSE (CARRYSET), + 8, + SCR_REG_REG (dsa1, SCR_OR, 1), + 0, +#elif SYM_CONF_MAX_TASK*4 > 256 + SCR_JUMPR ^ IFFALSE (CARRYSET), + 8, + SCR_REG_REG (dsa1, SCR_OR, 1), + 0, +#endif + /* + * Retrieve the DSA of this task. + * JUMP indirectly to the restart point of the CCB. + */ + SCR_SFBR_REG (dsa, SCR_AND, 0xfc), + 0, + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a120), + SCR_COPY (4), +}/*-------------------------< _SMS_A120 >------------------------*/,{ + 0, + RADDR_1 (dsa), +}/*-------------------------< RESEL_GO >-------------------------*/,{ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a130), + /* + * Move 'ccb.phys.head.go' action to + * scratch/scratch1. So scratch1 will + * contain the 'restart' field of the + * 'go' structure. + */ + SCR_COPY (8), +}/*-------------------------< _SMS_A130 >------------------------*/,{ + 0, + PADDR_B (scratch), + SCR_COPY (4), + PADDR_B (scratch1), /* phys.head.go.restart */ + RADDR_1 (temp), + SCR_RETURN, + 0, + /* In normal situations we branch to RESEL_DSA */ +}/*-------------------------< RESEL_DSA >------------------------*/,{ + /* + * ACK the IDENTIFY or TAG previously received. + */ + SCR_CLR (SCR_ACK), + 0, +}/*-------------------------< RESEL_DSA1 >-----------------------*/,{ + /* + * Copy the CCB header to a fixed location + * in the HCB using self-modifying SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a140), + SCR_COPY (sizeof(struct sym_ccbh)), +}/*-------------------------< _SMS_A140 >------------------------*/,{ + 0, + HADDR_1 (ccb_head), + /* + * Initialize the status register + */ + SCR_COPY (4), + HADDR_1 (ccb_head.status), + RADDR_1 (scr0), + /* + * Jump to dispatcher. + */ + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< RESEL_NO_TAG >---------------------*/,{ + /* + * Copy the LCB header to a fixed place in + * the HCB using self-modifying SCRIPTS. + */ + SCR_COPY (4), + RADDR_1 (dsa), + PADDR_A (_sms_a145), + SCR_COPY (sizeof(struct sym_lcbh)), +}/*-------------------------< _SMS_A145 >------------------------*/,{ + 0, + HADDR_1 (lcb_head), + /* + * Load the DSA with the unique ITL task. + */ + SCR_COPY (4), + HADDR_1 (lcb_head.itl_task_sa), + RADDR_1 (dsa), + SCR_JUMP, + PADDR_A (resel_go), +}/*-------------------------< DATA_IN >--------------------------*/,{ +/* + * Because the size depends on the + * #define SYM_CONF_MAX_SG parameter, + * it is filled in at runtime. + * + * ##===========< i=0; i<SYM_CONF_MAX_SG >========= + * || SCR_CHMOV_TBL ^ SCR_DATA_IN, + * || offsetof (struct sym_dsb, data[ i]), + * ##========================================== + */ +0 +}/*-------------------------< DATA_IN2 >-------------------------*/,{ + SCR_CALL, + PADDR_A (datai_done), + SCR_JUMP, + PADDR_B (data_ovrun), +}/*-------------------------< DATA_OUT >-------------------------*/,{ +/* + * Because the size depends on the + * #define SYM_CONF_MAX_SG parameter, + * it is filled in at runtime. + * + * ##===========< i=0; i<SYM_CONF_MAX_SG >========= + * || SCR_CHMOV_TBL ^ SCR_DATA_OUT, + * || offsetof (struct sym_dsb, data[ i]), + * ##========================================== + */ +0 +}/*-------------------------< DATA_OUT2 >------------------------*/,{ + SCR_CALL, + PADDR_A (datao_done), + SCR_JUMP, + PADDR_B (data_ovrun), +}/*-------------------------< PM0_DATA >-------------------------*/,{ + /* + * Read our host flags to SFBR, so we will be able + * to check against the data direction we expect. + */ + SCR_FROM_REG (HF_REG), + 0, + /* + * Check against actual DATA PHASE. + */ + SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), + PADDR_A (pm0_data_out), + /* + * Actual phase is DATA IN. + * Check against expected direction. + */ + SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), + PADDR_B (data_ovrun), + /* + * Keep track we are moving data from the + * PM0 DATA mini-script. + */ + SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), + 0, + /* + * Move the data to memory. + */ + SCR_CHMOV_TBL ^ SCR_DATA_IN, + offsetof (struct sym_ccb, phys.pm0.sg), + SCR_JUMP, + PADDR_A (pm0_data_end), +}/*-------------------------< PM0_DATA_OUT >---------------------*/,{ + /* + * Actual phase is DATA OUT. + * Check against expected direction. + */ + SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), + PADDR_B (data_ovrun), + /* + * Keep track we are moving data from the + * PM0 DATA mini-script. + */ + SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), + 0, + /* + * Move the data from memory. + */ + SCR_CHMOV_TBL ^ SCR_DATA_OUT, + offsetof (struct sym_ccb, phys.pm0.sg), +}/*-------------------------< PM0_DATA_END >---------------------*/,{ + /* + * Clear the flag that told we were moving + * data from the PM0 DATA mini-script. + */ + SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM0)), + 0, + /* + * Return to the previous DATA script which + * is guaranteed by design (if no bug) to be + * the main DATA script for this transfer. + */ + SCR_COPY (4), + RADDR_1 (dsa), + RADDR_1 (scratcha), + SCR_REG_REG (scratcha, SCR_ADD, offsetof (struct sym_ccb,phys.pm0.ret)), + 0, +}/*-------------------------< PM_DATA_END >----------------------*/,{ + SCR_COPY (4), + RADDR_1 (scratcha), + PADDR_A (_sms_a150), + SCR_COPY (4), +}/*-------------------------< _SMS_A150 >------------------------*/,{ + 0, + RADDR_1 (temp), + SCR_RETURN, + 0, +}/*-------------------------< PM1_DATA >-------------------------*/,{ + /* + * Read our host flags to SFBR, so we will be able + * to check against the data direction we expect. + */ + SCR_FROM_REG (HF_REG), + 0, + /* + * Check against actual DATA PHASE. + */ + SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), + PADDR_A (pm1_data_out), + /* + * Actual phase is DATA IN. + * Check against expected direction. + */ + SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), + PADDR_B (data_ovrun), + /* + * Keep track we are moving data from the + * PM1 DATA mini-script. + */ + SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), + 0, + /* + * Move the data to memory. + */ + SCR_CHMOV_TBL ^ SCR_DATA_IN, + offsetof (struct sym_ccb, phys.pm1.sg), + SCR_JUMP, + PADDR_A (pm1_data_end), +}/*-------------------------< PM1_DATA_OUT >---------------------*/,{ + /* + * Actual phase is DATA OUT. + * Check against expected direction. + */ + SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), + PADDR_B (data_ovrun), + /* + * Keep track we are moving data from the + * PM1 DATA mini-script. + */ + SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), + 0, + /* + * Move the data from memory. + */ + SCR_CHMOV_TBL ^ SCR_DATA_OUT, + offsetof (struct sym_ccb, phys.pm1.sg), +}/*-------------------------< PM1_DATA_END >---------------------*/,{ + /* + * Clear the flag that told we were moving + * data from the PM1 DATA mini-script. + */ + SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM1)), + 0, + /* + * Return to the previous DATA script which + * is guaranteed by design (if no bug) to be + * the main DATA script for this transfer. + */ + SCR_COPY (4), + RADDR_1 (dsa), + RADDR_1 (scratcha), + SCR_REG_REG (scratcha, SCR_ADD, offsetof (struct sym_ccb,phys.pm1.ret)), + 0, + SCR_JUMP, + PADDR_A (pm_data_end), +}/*--------------------------<>----------------------------------*/ +}; + +static struct SYM_FWB_SCR SYM_FWB_SCR = { +/*-------------------------< NO_DATA >--------------------------*/ { + SCR_JUMP, + PADDR_B (data_ovrun), +}/*-------------------------< SEL_FOR_ABORT >--------------------*/,{ + /* + * We are jumped here by the C code, if we have + * some target to reset or some disconnected + * job to abort. Since error recovery is a serious + * busyness, we will really reset the SCSI BUS, if + * case of a SCSI interrupt occurring in this path. + */ + +#ifdef SYM_CONF_TARGET_ROLE_SUPPORT + /* + * Set initiator mode. + */ + SCR_CLR (SCR_TRG), + 0, +#endif + /* + * And try to select this target. + */ + SCR_SEL_TBL_ATN ^ offsetof (struct sym_hcb, abrt_sel), + PADDR_A (reselect), + /* + * Wait for the selection to complete or + * the selection to time out. + */ + SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)), + -8, + /* + * Call the C code. + */ + SCR_INT, + SIR_TARGET_SELECTED, + /* + * The C code should let us continue here. + * Send the 'kiss of death' message. + * We expect an immediate disconnect once + * the target has eaten the message. + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + SCR_MOVE_TBL ^ SCR_MSG_OUT, + offsetof (struct sym_hcb, abrt_tbl), + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + SCR_WAIT_DISC, + 0, + /* + * Tell the C code that we are done. + */ + SCR_INT, + SIR_ABORT_SENT, +}/*-------------------------< SEL_FOR_ABORT_1 >------------------*/,{ + /* + * Jump at scheduler. + */ + SCR_JUMP, + PADDR_A (start), +}/*-------------------------< MSG_IN_ETC >-----------------------*/,{ + /* + * If it is an EXTENDED (variable size message) + * Handle it. + */ + SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)), + PADDR_B (msg_extended), + /* + * Let the C code handle any other + * 1 byte message. + */ + SCR_JUMP ^ IFTRUE (MASK (0x00, 0xf0)), + PADDR_B (msg_received), + SCR_JUMP ^ IFTRUE (MASK (0x10, 0xf0)), + PADDR_B (msg_received), + /* + * We donnot handle 2 bytes messages from SCRIPTS. + * So, let the C code deal with these ones too. + */ + SCR_JUMP ^ IFFALSE (MASK (0x20, 0xf0)), + PADDR_B (msg_weird_seen), + SCR_CLR (SCR_ACK), + 0, + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (msgin[1]), +}/*-------------------------< MSG_RECEIVED >---------------------*/,{ + SCR_COPY (4), /* DUMMY READ */ + HADDR_1 (scratch), + RADDR_1 (scratcha), + SCR_INT, + SIR_MSG_RECEIVED, +}/*-------------------------< MSG_WEIRD_SEEN >-------------------*/,{ + SCR_COPY (4), /* DUMMY READ */ + HADDR_1 (scratch), + RADDR_1 (scratcha), + SCR_INT, + SIR_MSG_WEIRD, +}/*-------------------------< MSG_EXTENDED >---------------------*/,{ + /* + * Clear ACK and get the next byte + * assumed to be the message length. + */ + SCR_CLR (SCR_ACK), + 0, + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (msgin[1]), + /* + * Try to catch some unlikely situations as 0 length + * or too large the length. + */ + SCR_JUMP ^ IFTRUE (DATA (0)), + PADDR_B (msg_weird_seen), + SCR_TO_REG (scratcha), + 0, + SCR_REG_REG (sfbr, SCR_ADD, (256-8)), + 0, + SCR_JUMP ^ IFTRUE (CARRYSET), + PADDR_B (msg_weird_seen), + /* + * We donnot handle extended messages from SCRIPTS. + * Read the amount of data corresponding to the + * message length and call the C code. + */ + SCR_COPY (1), + RADDR_1 (scratcha), + PADDR_B (_sms_b10), + SCR_CLR (SCR_ACK), + 0, +}/*-------------------------< _SMS_B10 >-------------------------*/,{ + SCR_MOVE_ABS (0) ^ SCR_MSG_IN, + HADDR_1 (msgin[2]), + SCR_JUMP, + PADDR_B (msg_received), +}/*-------------------------< MSG_BAD >--------------------------*/,{ + /* + * unimplemented message - reject it. + */ + SCR_INT, + SIR_REJECT_TO_SEND, + SCR_SET (SCR_ATN), + 0, + SCR_JUMP, + PADDR_A (clrack), +}/*-------------------------< MSG_WEIRD >------------------------*/,{ + /* + * weird message received + * ignore all MSG IN phases and reject it. + */ + SCR_INT, + SIR_REJECT_TO_SEND, + SCR_SET (SCR_ATN), + 0, +}/*-------------------------< MSG_WEIRD1 >-----------------------*/,{ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR_A (dispatch), + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + HADDR_1 (scratch), + SCR_JUMP, + PADDR_B (msg_weird1), +}/*-------------------------< WDTR_RESP >------------------------*/,{ + /* + * let the target fetch our answer. + */ + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), + PADDR_B (nego_bad_phase), +}/*-------------------------< SEND_WDTR >------------------------*/,{ + /* + * Send the M_X_WIDE_REQ + */ + SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, + HADDR_1 (msgout), + SCR_JUMP, + PADDR_B (msg_out_done), +}/*-------------------------< SDTR_RESP >------------------------*/,{ + /* + * let the target fetch our answer. + */ + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), + PADDR_B (nego_bad_phase), +}/*-------------------------< SEND_SDTR >------------------------*/,{ + /* + * Send the M_X_SYNC_REQ + */ + SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, + HADDR_1 (msgout), + SCR_JUMP, + PADDR_B (msg_out_done), +}/*-------------------------< PPR_RESP >-------------------------*/,{ + /* + * let the target fetch our answer. + */ + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), + PADDR_B (nego_bad_phase), +}/*-------------------------< SEND_PPR >-------------------------*/,{ + /* + * Send the M_X_PPR_REQ + */ + SCR_MOVE_ABS (8) ^ SCR_MSG_OUT, + HADDR_1 (msgout), + SCR_JUMP, + PADDR_B (msg_out_done), +}/*-------------------------< NEGO_BAD_PHASE >-------------------*/,{ + SCR_INT, + SIR_NEGO_PROTO, + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< MSG_OUT >--------------------------*/,{ + /* + * The target requests a message. + * We donnot send messages that may + * require the device to go to bus free. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, + HADDR_1 (msgout), + /* + * ... wait for the next phase + * if it's a message out, send it again, ... + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), + PADDR_B (msg_out), +}/*-------------------------< MSG_OUT_DONE >---------------------*/,{ + /* + * Let the C code be aware of the + * sent message and clear the message. + */ + SCR_INT, + SIR_MSG_OUT_DONE, + /* + * ... and process the next phase + */ + SCR_JUMP, + PADDR_A (dispatch), +}/*-------------------------< DATA_OVRUN >-----------------------*/,{ + /* + * Zero scratcha that will count the + * extras bytes. + */ + SCR_COPY (4), + PADDR_B (zero), + RADDR_1 (scratcha), +}/*-------------------------< DATA_OVRUN1 >----------------------*/,{ + /* + * The target may want to transfer too much data. + * + * If phase is DATA OUT write 1 byte and count it. + */ + SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), + 16, + SCR_CHMOV_ABS (1) ^ SCR_DATA_OUT, + HADDR_1 (scratch), + SCR_JUMP, + PADDR_B (data_ovrun2), + /* + * If WSR is set, clear this condition, and + * count this byte. + */ + SCR_FROM_REG (scntl2), + 0, + SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), + 16, + SCR_REG_REG (scntl2, SCR_OR, WSR), + 0, + SCR_JUMP, + PADDR_B (data_ovrun2), + /* + * Finally check against DATA IN phase. + * Signal data overrun to the C code + * and jump to dispatcher if not so. + * Read 1 byte otherwise and count it. + */ + SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_IN)), + 16, + SCR_INT, + SIR_DATA_OVERRUN, + SCR_JUMP, + PADDR_A (dispatch), + SCR_CHMOV_ABS (1) ^ SCR_DATA_IN, + HADDR_1 (scratch), +}/*-------------------------< DATA_OVRUN2 >----------------------*/,{ + /* + * Count this byte. + * This will allow to return a negative + * residual to user. + */ + SCR_REG_REG (scratcha, SCR_ADD, 0x01), + 0, + SCR_REG_REG (scratcha1, SCR_ADDC, 0), + 0, + SCR_REG_REG (scratcha2, SCR_ADDC, 0), + 0, + /* + * .. and repeat as required. + */ + SCR_JUMP, + PADDR_B (data_ovrun1), +}/*-------------------------< ABORT_RESEL >----------------------*/,{ + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + /* + * send the abort/abortag/reset message + * we expect an immediate disconnect + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, + HADDR_1 (msgout), + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + SCR_WAIT_DISC, + 0, + SCR_INT, + SIR_RESEL_ABORTED, + SCR_JUMP, + PADDR_A (start), +}/*-------------------------< RESEND_IDENT >---------------------*/,{ + /* + * The target stays in MSG OUT phase after having acked + * Identify [+ Tag [+ Extended message ]]. Targets shall + * behave this way on parity error. + * We must send it again all the messages. + */ + SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */ + 0, /* 1rst ACK = 90 ns. Hope the chip isn't too fast */ + SCR_JUMP, + PADDR_A (send_ident), +}/*-------------------------< IDENT_BREAK >----------------------*/,{ + SCR_CLR (SCR_ATN), + 0, + SCR_JUMP, + PADDR_A (select2), +}/*-------------------------< IDENT_BREAK_ATN >------------------*/,{ + SCR_SET (SCR_ATN), + 0, + SCR_JUMP, + PADDR_A (select2), +}/*-------------------------< SDATA_IN >-------------------------*/,{ + SCR_CHMOV_TBL ^ SCR_DATA_IN, + offsetof (struct sym_dsb, sense), + SCR_CALL, + PADDR_A (datai_done), + SCR_JUMP, + PADDR_B (data_ovrun), +}/*-------------------------< RESEL_BAD_LUN >--------------------*/,{ + /* + * Message is an IDENTIFY, but lun is unknown. + * Signal problem to C code for logging the event. + * Send a M_ABORT to clear all pending tasks. + */ + SCR_INT, + SIR_RESEL_BAD_LUN, + SCR_JUMP, + PADDR_B (abort_resel), +}/*-------------------------< BAD_I_T_L >------------------------*/,{ + /* + * We donnot have a task for that I_T_L. + * Signal problem to C code for logging the event. + * Send a M_ABORT message. + */ + SCR_INT, + SIR_RESEL_BAD_I_T_L, + SCR_JUMP, + PADDR_B (abort_resel), +}/*-------------------------< BAD_I_T_L_Q >----------------------*/,{ + /* + * We donnot have a task that matches the tag. + * Signal problem to C code for logging the event. + * Send a M_ABORTTAG message. + */ + SCR_INT, + SIR_RESEL_BAD_I_T_L_Q, + SCR_JUMP, + PADDR_B (abort_resel), +}/*-------------------------< BAD_STATUS >-----------------------*/,{ + /* + * Anything different from INTERMEDIATE + * CONDITION MET should be a bad SCSI status, + * given that GOOD status has already been tested. + * Call the C code. + */ + SCR_COPY (4), + PADDR_B (startpos), + RADDR_1 (scratcha), + SCR_INT ^ IFFALSE (DATA (S_COND_MET)), + SIR_BAD_SCSI_STATUS, + SCR_RETURN, + 0, +}/*-------------------------< WSR_MA_HELPER >--------------------*/,{ + /* + * Helper for the C code when WSR bit is set. + * Perform the move of the residual byte. + */ + SCR_CHMOV_TBL ^ SCR_DATA_IN, + offsetof (struct sym_ccb, phys.wresid), + SCR_JUMP, + PADDR_A (dispatch), + +}/*-------------------------< ZERO >-----------------------------*/,{ + SCR_DATA_ZERO, +}/*-------------------------< SCRATCH >--------------------------*/,{ + SCR_DATA_ZERO, /* MUST BE BEFORE SCRATCH1 */ +}/*-------------------------< SCRATCH1 >-------------------------*/,{ + SCR_DATA_ZERO, +}/*-------------------------< PREV_DONE >------------------------*/,{ + SCR_DATA_ZERO, /* MUST BE BEFORE DONE_POS ! */ +}/*-------------------------< DONE_POS >-------------------------*/,{ + SCR_DATA_ZERO, +}/*-------------------------< NEXTJOB >--------------------------*/,{ + SCR_DATA_ZERO, /* MUST BE BEFORE STARTPOS ! */ +}/*-------------------------< STARTPOS >-------------------------*/,{ + SCR_DATA_ZERO, +}/*-------------------------< TARGTBL >--------------------------*/,{ + SCR_DATA_ZERO, +}/*--------------------------<>----------------------------------*/ +}; + +static struct SYM_FWZ_SCR SYM_FWZ_SCR = { + /*-------------------------< SNOOPTEST >------------------------*/{ + /* + * Read the variable. + */ + SCR_COPY (4), + HADDR_1 (scratch), + RADDR_1 (scratcha), + /* + * Write the variable. + */ + SCR_COPY (4), + RADDR_1 (temp), + HADDR_1 (scratch), + /* + * Read back the variable. + */ + SCR_COPY (4), + HADDR_1 (scratch), + RADDR_1 (temp), +}/*-------------------------< SNOOPEND >-------------------------*/,{ + /* + * And stop. + */ + SCR_INT, + 99, +}/*--------------------------<>----------------------------------*/ +}; |