Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 142 insertions, 0 deletions

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h
new file mode 100644
index 000000000..46c03ed71
--- /dev/null
+++ b/drivers/tty/serial/cpm_uart/cpm_uart.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Driver for CPM (SCC/SMC) serial ports
+ *
+ *  Copyright (C) 2004 Freescale Semiconductor, Inc.
+ *
+ *  2006 (c) MontaVista Software, Inc.
+ *	Vitaly Bordug <vbordug@ru.mvista.com>
+ */
+#ifndef CPM_UART_H
+#define CPM_UART_H
+
+#include <linux/platform_device.h>
+#include <linux/fs_uart_pd.h>
+
+struct gpio_desc;
+
+#if defined(CONFIG_CPM2)
+#include "cpm_uart_cpm2.h"
+#elif defined(CONFIG_CPM1)
+#include "cpm_uart_cpm1.h"
+#endif
+
+#define SERIAL_CPM_MAJOR	204
+#define SERIAL_CPM_MINOR	46
+
+#define IS_SMC(pinfo)		(pinfo->flags & FLAG_SMC)
+#define IS_DISCARDING(pinfo)	(pinfo->flags & FLAG_DISCARDING)
+#define FLAG_DISCARDING	0x00000004	/* when set, don't discard */
+#define FLAG_SMC	0x00000002
+#define FLAG_CONSOLE	0x00000001
+
+#define UART_SMC1	fsid_smc1_uart
+#define UART_SMC2	fsid_smc2_uart
+#define UART_SCC1	fsid_scc1_uart
+#define UART_SCC2	fsid_scc2_uart
+#define UART_SCC3	fsid_scc3_uart
+#define UART_SCC4	fsid_scc4_uart
+
+#define UART_NR		fs_uart_nr
+
+#define RX_NUM_FIFO	4
+#define RX_BUF_SIZE	32
+#define TX_NUM_FIFO	4
+#define TX_BUF_SIZE	32
+
+#define SCC_WAIT_CLOSING 100
+
+#define GPIO_CTS	0
+#define GPIO_RTS	1
+#define GPIO_DCD	2
+#define GPIO_DSR	3
+#define GPIO_DTR	4
+#define GPIO_RI		5
+
+#define NUM_GPIOS	(GPIO_RI+1)
+
+struct uart_cpm_port {
+	struct uart_port	port;
+	u16			rx_nrfifos;
+	u16			rx_fifosize;
+	u16			tx_nrfifos;
+	u16			tx_fifosize;
+	smc_t __iomem		*smcp;
+	smc_uart_t __iomem	*smcup;
+	scc_t __iomem		*sccp;
+	scc_uart_t __iomem	*sccup;
+	cbd_t __iomem		*rx_bd_base;
+	cbd_t __iomem		*rx_cur;
+	cbd_t __iomem		*tx_bd_base;
+	cbd_t __iomem		*tx_cur;
+	unsigned char		*tx_buf;
+	unsigned char		*rx_buf;
+	u32			flags;
+	struct clk		*clk;
+	u8			brg;
+	uint			 dp_addr;
+	void			*mem_addr;
+	dma_addr_t		 dma_addr;
+	u32			mem_size;
+	/* wait on close if needed */
+	int			wait_closing;
+	/* value to combine with opcode to form cpm command */
+	u32			command;
+	struct gpio_desc	*gpios[NUM_GPIOS];
+};
+
+extern struct uart_cpm_port cpm_uart_ports[UART_NR];
+
+/* these are located in their respective files */
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+				struct device_node *np);
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
+int cpm_uart_init_portdesc(void);
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
+
+void smc1_lineif(struct uart_cpm_port *pinfo);
+void smc2_lineif(struct uart_cpm_port *pinfo);
+void scc1_lineif(struct uart_cpm_port *pinfo);
+void scc2_lineif(struct uart_cpm_port *pinfo);
+void scc3_lineif(struct uart_cpm_port *pinfo);
+void scc4_lineif(struct uart_cpm_port *pinfo);
+
+/*
+   virtual to phys transtalion
+*/
+static inline unsigned long cpu2cpm_addr(void *addr,
+                                         struct uart_cpm_port *pinfo)
+{
+	int offset;
+	u32 val = (u32)addr;
+	u32 mem = (u32)pinfo->mem_addr;
+	/* sane check */
+	if (likely(val >= mem && val < mem + pinfo->mem_size)) {
+		offset = val - mem;
+		return pinfo->dma_addr + offset;
+	}
+	/* something nasty happened */
+	BUG();
+	return 0;
+}
+
+static inline void *cpm2cpu_addr(unsigned long addr,
+                                 struct uart_cpm_port *pinfo)
+{
+	int offset;
+	u32 val = addr;
+	u32 dma = (u32)pinfo->dma_addr;
+	/* sane check */
+	if (likely(val >= dma && val < dma + pinfo->mem_size)) {
+		offset = val - dma;
+		return pinfo->mem_addr + offset;
+	}
+	/* something nasty happened */
+	BUG();
+	return NULL;
+}
+
+
+#endif /* CPM_UART_H */