Merging upstream version 6.1.82.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 75 insertions, 42 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c74eaf255..2f0f05259 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1345,11 +1345,41 @@ static void pl011_start_tx_pio(struct uart_amba_port *uap)
 	}
 }
 
+static void pl011_rs485_tx_start(struct uart_amba_port *uap)
+{
+	struct uart_port *port = &uap->port;
+	u32 cr;
+
+	/* Enable transmitter */
+	cr = pl011_read(uap, REG_CR);
+	cr |= UART011_CR_TXE;
+
+	/* Disable receiver if half-duplex */
+	if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
+		cr &= ~UART011_CR_RXE;
+
+	if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
+		cr &= ~UART011_CR_RTS;
+	else
+		cr |= UART011_CR_RTS;
+
+	pl011_write(cr, uap, REG_CR);
+
+	if (port->rs485.delay_rts_before_send)
+		mdelay(port->rs485.delay_rts_before_send);
+
+	uap->rs485_tx_started = true;
+}
+
 static void pl011_start_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 
+	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
+	    !uap->rs485_tx_started)
+		pl011_rs485_tx_start(uap);
+
 	if (!pl011_dma_tx_start(uap))
 		pl011_start_tx_pio(uap);
 }
@@ -1431,42 +1461,12 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
 	return true;
 }
 
-static void pl011_rs485_tx_start(struct uart_amba_port *uap)
-{
-	struct uart_port *port = &uap->port;
-	u32 cr;
-
-	/* Enable transmitter */
-	cr = pl011_read(uap, REG_CR);
-	cr |= UART011_CR_TXE;
-
-	/* Disable receiver if half-duplex */
-	if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
-		cr &= ~UART011_CR_RXE;
-
-	if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
-		cr &= ~UART011_CR_RTS;
-	else
-		cr |= UART011_CR_RTS;
-
-	pl011_write(cr, uap, REG_CR);
-
-	if (port->rs485.delay_rts_before_send)
-		mdelay(port->rs485.delay_rts_before_send);
-
-	uap->rs485_tx_started = true;
-}
-
 /* Returns true if tx interrupts have to be (kept) enabled  */
 static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 {
 	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count = uap->fifosize >> 1;
 
-	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
-	    !uap->rs485_tx_started)
-		pl011_rs485_tx_start(uap);
-
 	if (uap->port.x_char) {
 		if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
 			return true;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 338cb19de..163a89f84 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -237,6 +237,14 @@
 #define MAX310x_REV_MASK		(0xf8)
 #define MAX310X_WRITE_BIT		0x80
 
+/* Port startup definitions */
+#define MAX310X_PORT_STARTUP_WAIT_RETRIES	20 /* Number of retries */
+#define MAX310X_PORT_STARTUP_WAIT_DELAY_MS	10 /* Delay between retries */
+
+/* Crystal-related definitions */
+#define MAX310X_XTAL_WAIT_RETRIES	20 /* Number of retries */
+#define MAX310X_XTAL_WAIT_DELAY_MS	10 /* Delay between retries */
+
 /* MAX3107 specific */
 #define MAX3107_REV_ID			(0xa0)
 
@@ -583,7 +591,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
 	return 1;
 }
 
-static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
+static s32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
 			       unsigned long freq, bool xtal)
 {
 	unsigned int div, clksrc, pllcfg = 0;
@@ -641,12 +649,20 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
 
 	/* Wait for crystal */
 	if (xtal) {
-		unsigned int val;
-		msleep(10);
-		regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
-		if (!(val & MAX310X_STS_CLKREADY_BIT)) {
-			dev_warn(dev, "clock is not stable yet\n");
-		}
+		bool stable = false;
+		unsigned int try = 0, val = 0;
+
+		do {
+			msleep(MAX310X_XTAL_WAIT_DELAY_MS);
+			regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+
+			if (val & MAX310X_STS_CLKREADY_BIT)
+				stable = true;
+		} while (!stable && (++try < MAX310X_XTAL_WAIT_RETRIES));
+
+		if (!stable)
+			return dev_err_probe(dev, -EAGAIN,
+					     "clock is not stable\n");
 	}
 
 	return bestfreq;
@@ -1274,7 +1290,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 {
 	int i, ret, fmin, fmax, freq;
 	struct max310x_port *s;
-	u32 uartclk = 0;
+	s32 uartclk = 0;
 	bool xtal;
 
 	for (i = 0; i < devtype->nr; i++)
@@ -1337,6 +1353,9 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		goto out_clk;
 
 	for (i = 0; i < devtype->nr; i++) {
+		bool started = false;
+		unsigned int try = 0, val = 0;
+
 		/* Reset port */
 		regmap_write(regmaps[i], MAX310X_MODE2_REG,
 			     MAX310X_MODE2_RST_BIT);
@@ -1345,13 +1364,27 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 
 		/* Wait for port startup */
 		do {
-			regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &ret);
-		} while (ret != 0x01);
+			msleep(MAX310X_PORT_STARTUP_WAIT_DELAY_MS);
+			regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &val);
+
+			if (val == 0x01)
+				started = true;
+		} while (!started && (++try < MAX310X_PORT_STARTUP_WAIT_RETRIES));
+
+		if (!started) {
+			ret = dev_err_probe(dev, -EAGAIN, "port reset failed\n");
+			goto out_uart;
+		}
 
 		regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1);
 	}
 
 	uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
+	if (uartclk < 0) {
+		ret = uartclk;
+		goto out_uart;
+	}
+
 	dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
 
 	for (i = 0; i < devtype->nr; i++) {
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 8767c504b..9d3b23730 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -859,7 +859,7 @@ int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 			ret = -EFAULT;
 		return ret;
 	case TIOCSLCKTRMIOS:
-		if (!capable(CAP_SYS_ADMIN))
+		if (!checkpoint_restore_ns_capable(&init_user_ns))
 			return -EPERM;
 		copy_termios_locked(real_tty, &kterm);
 		if (user_termios_to_kernel_termios(&kterm,
@@ -876,7 +876,7 @@ int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 			ret = -EFAULT;
 		return ret;
 	case TIOCSLCKTRMIOS:
-		if (!capable(CAP_SYS_ADMIN))
+		if (!checkpoint_restore_ns_capable(&init_user_ns))
 			return -EPERM;
 		copy_termios_locked(real_tty, &kterm);
 		if (user_termios_to_kernel_termios_1(&kterm,