diff options
Diffstat (limited to 'Documentation/arm/keystone')
| -rw-r--r-- | Documentation/arm/keystone/knav-qmss.rst | 60 | ||||
| -rw-r--r-- | Documentation/arm/keystone/overview.rst | 74 |
2 files changed, 134 insertions, 0 deletions
diff --git a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst new file mode 100644 index 000000000..7f7638d80 --- /dev/null +++ b/Documentation/arm/keystone/knav-qmss.rst @@ -0,0 +1,60 @@ +====================================================================== +Texas Instruments Keystone Navigator Queue Management SubSystem driver +====================================================================== + +Driver source code path + drivers/soc/ti/knav_qmss.c + drivers/soc/ti/knav_qmss_acc.c + +The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of +the main hardware sub system which forms the backbone of the Keystone +multi-core Navigator. QMSS consist of queue managers, packed-data structure +processors(PDSP), linking RAM, descriptor pools and infrastructure +Packet DMA. +The Queue Manager is a hardware module that is responsible for accelerating +management of the packet queues. Packets are queued/de-queued by writing or +reading descriptor address to a particular memory mapped location. The PDSPs +perform QMSS related functions like accumulation, QoS, or event management. +Linking RAM registers are used to link the descriptors which are stored in +descriptor RAM. Descriptor RAM is configurable as internal or external memory. +The QMSS driver manages the PDSP setups, linking RAM regions, +queue pool management (allocation, push, pop and notify) and descriptor +pool management. + +knav qmss driver provides a set of APIs to drivers to open/close qmss queues, +allocate descriptor pools, map the descriptors, push/pop to queues etc. For +details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h + +DT documentation is available at +Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt + +Accumulator QMSS queues using PDSP firmware +============================================ +The QMSS PDSP firmware support accumulator channel that can monitor a single +queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the +driver that interface with the accumulator PDSP. This configures +accumulator channels defined in DTS (example in DT documentation) to monitor +1 or 32 queues per channel. More description on the firmware is available in +CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at + + git://git.ti.com/keystone-rtos/qmss-lld.git + +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator +channels. This firmware is available under ti-keystone folder of +firmware.git at + + git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git + +To use copy the firmware image to lib/firmware folder of the initramfs or +ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin +in the file system and boot up the kernel. User would see + + "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP" + +in the boot up log if loading of firmware to PDSP is successful. + +Use of accumulated queues requires the firmware image to be present in the +file system. The driver doesn't acc queues to the supported queue range if +PDSP is not running in the SoC. The API call fails if there is a queue open +request to an acc queue and PDSP is not running. So make sure to copy firmware +to file system before using these queue types. diff --git a/Documentation/arm/keystone/overview.rst b/Documentation/arm/keystone/overview.rst new file mode 100644 index 000000000..cd90298c4 --- /dev/null +++ b/Documentation/arm/keystone/overview.rst @@ -0,0 +1,74 @@ +========================== +TI Keystone Linux Overview +========================== + +Introduction +------------ +Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors +and c66x DSP cores. This document describes essential information required +for users to run Linux on Keystone based EVMs from Texas Instruments. + +Following SoCs & EVMs are currently supported:- + +K2HK SoC and EVM +================= + +a.k.a Keystone 2 Hawking/Kepler SoC +TCI6636K2H & TCI6636K2K: See documentation at + + http://www.ti.com/product/tci6638k2k + http://www.ti.com/product/tci6638k2h + +EVM: + http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx + +K2E SoC and EVM +=============== + +a.k.a Keystone 2 Edison SoC + +K2E - 66AK2E05: + +See documentation at + + http://www.ti.com/product/66AK2E05/technicaldocuments + +EVM: + https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html + +K2L SoC and EVM +=============== + +a.k.a Keystone 2 Lamarr SoC + +K2L - TCI6630K2L: + +See documentation at + http://www.ti.com/product/TCI6630K2L/technicaldocuments + +EVM: + https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html + +Configuration +------------- + +All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same +image is used to boot on individual EVMs. The platform configuration is +specified through DTS. Following are the DTS used: + + K2HK EVM: + k2hk-evm.dts + K2E EVM: + k2e-evm.dts + K2L EVM: + k2l-evm.dts + +The device tree documentation for the keystone machines are located at + + Documentation/devicetree/bindings/arm/keystone/keystone.txt + +Document Author +--------------- +Murali Karicheri <m-karicheri2@ti.com> + +Copyright 2015 Texas Instruments |