diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/rockchip')
10 files changed, 1014 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt new file mode 100644 index 000000000..43561584c --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -0,0 +1,98 @@ +Rockchip RK3288 specific extensions to the Analogix Display Port +================================ + +Required properties: +- compatible: "rockchip,rk3288-dp", + "rockchip,rk3399-edp"; + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + of memory mapped region. + +- clock-names: from common clock binding: + Required elements: "dp" "pclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + +- pinctrl-names: Names corresponding to the chip hotplug pinctrl states. +- pinctrl-0: pin-control mode. should be <&edp_hpd> + +- reset-names: Must include the name "dp" + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: there are 2 port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0: contained 2 endpoints, connecting to the output of vop. + Port 1: contained 1 endpoint, connecting to the input of panel. + +Optional property for different chips: +- clocks: from common clock binding: handle to grf_vio clock. + +- clock-names: from common clock binding: + Required elements: "grf" + +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt +- phys (required) +- phy-names (required) +- hpd-gpios (optional) +- force-hpd (optional) +------------------------------------------------------------------------------- + +Example: + dp-controller: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&dp_phy>; + phy-names = "dp"; + + rockchip,grf = <&grf>; + resets = <&cru 111>; + reset-names = "dp"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp> + }; + }; + }; + }; + + pinctrl { + edp { + edp_hpd: edp-hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt new file mode 100644 index 000000000..8df7d2e39 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt @@ -0,0 +1,74 @@ +Rockchip RK3399 specific extensions to the cdn Display Port +================================ + +Required properties: +- compatible: must be "rockchip,rk3399-cdn-dp" + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + +- clock-names: from common clock binding: + Required elements: "core-clk" "pclk" "spdif" "grf" + +- resets : a list of phandle + reset specifier pairs +- reset-names : string of reset names + Required elements: "apb", "core", "dptx", "spdif" +- power-domains : power-domain property defined with a phandle + to respective power domain. +- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE> +- assigned-clock-rates : the DP core clk frequency, shall be: 100000000 + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: contain a port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + contained 2 endpoints, connecting to the output of vop. + +- phys: from general PHY binding: the phandle for the PHY device. + +- extcon: extcon specifier for the Power Delivery + +- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF + +------------------------------------------------------------------------------- + +Example: + cdn_dp: dp@fec00000 { + compatible = "rockchip,rk3399-cdn-dp"; + reg = <0x0 0xfec00000 0x0 0x100000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, + <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; + clock-names = "core-clk", "pclk", "spdif", "grf"; + assigned-clocks = <&cru SCLK_DP_CORE>; + assigned-clock-rates = <100000000>; + power-domains = <&power RK3399_PD_HDCP>; + phys = <&tcphy0_dp>, <&tcphy1_dp>; + resets = <&cru SRST_DPTX_SPDIF_REC>; + reset-names = "spdif"; + extcon = <&fusb0>, <&fusb1>; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dp_in: port { + #address-cells = <1>; + #size-cells = <0>; + dp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dp>; + }; + + dp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dp>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt new file mode 100644 index 000000000..9a223df85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -0,0 +1,94 @@ +Rockchip specific extensions to the Synopsys Designware MIPI DSI +================================ + +Required properties: +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. +- compatible: one of + "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi" +- reg: Represent the physical address range of the controller. +- interrupts: Represent the controller's interrupt to the CPU(s). +- clocks, clock-names: Phandles to the controller's pll reference + clock(ref) when using an internal dphy and APB clock(pclk). + For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) + are required. As described in [1]. +- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. +- ports: contain a port node with endpoint definitions as defined in [2]. + For vopb,set the reg = <0> and set the reg = <1> for vopl. +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +Optional properties: +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "dphy" if phys references an external phy. +- #phy-cells: Defined when used as ISP phy, should be 0. +- power-domains: a phandle to mipi dsi power domain node. +- resets: list of phandle + reset specifier pairs, as described in [3]. +- reset-names: string reset name, must be "apb". + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/media/video-interfaces.txt +[3] Documentation/devicetree/bindings/reset/reset.txt + +Example: + mipi_dsi: mipi@ff960000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0xff960000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>; + clock-names = "ref", "pclk"; + resets = <&cru SRST_MIPIDSI0>; + reset-names = "apb"; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + + mipi_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_out_panel: endpoint { + remote-endpoint = <&panel_in_mipi>; + }; + }; + }; + + panel { + compatible ="boe,tv080wum-nl0"; + reg = <0>; + + enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + backlight = <&backlight>; + + port { + panel_in_mipi: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt new file mode 100644 index 000000000..cec21714f --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt @@ -0,0 +1,49 @@ +Rockchip specific extensions to the Innosilicon HDMI +================================ + +Required properties: +- compatible: + "rockchip,rk3036-inno-hdmi"; +- reg: + Physical base address and length of the controller's registers. +- clocks, clock-names: + Phandle to hdmi controller clock, name should be "pclk" +- interrupts: + HDMI interrupt number +- ports: + Contain one port node with endpoint definitions as defined in + Documentation/devicetree/bindings/graph.txt. +- pinctrl-0, pinctrl-name: + Switch the iomux of HPD/CEC pins to HDMI function. + +Example: +hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_lcdc: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdc_out_hdmi>; + }; + }; +}; + +&pinctrl { + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, + <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>, + <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + +}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml new file mode 100644 index 000000000..7e59dee15 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DWC HDMI TX Encoder + +maintainers: + - Mark Yao <markyao0591@gmail.com> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - rockchip,rk3228-dw-hdmi + - rockchip,rk3288-dw-hdmi + - rockchip,rk3328-dw-hdmi + - rockchip,rk3399-dw-hdmi + - rockchip,rk3568-dw-hdmi + + reg-io-width: + const: 4 + + avdd-0v9-supply: + description: + A 0.9V supply that powers up the SoC internal circuitry. The actual pin name + varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes + HDMI_AVDD_1V0. + + avdd-1v8-supply: + description: + A 1.8V supply that powers up the SoC internal circuitry. The pin name on the + SoC usually is HDMI_TX_AVDD_1V8. + + clocks: + minItems: 2 + items: + - {} + - {} + # The next three clocks are all optional, but shall be specified in this + # order when present. + - description: The HDMI CEC controller main clock + - description: Power for GRF IO + - description: External clock for some HDMI PHY (old clock name, deprecated) + - description: External clock for some HDMI PHY (new name) + + clock-names: + minItems: 2 + items: + - {} + - {} + - enum: + - cec + - grf + - vpll + - ref + - enum: + - grf + - vpll + - ref + - enum: + - vpll + - ref + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + phys: + maxItems: 1 + description: The HDMI PHY + + phy-names: + const: hdmi + + pinctrl-names: + description: + The unwedge pinctrl entry shall drive the DDC SDA line low. This is + intended to work around a hardware errata that can cause the DDC I2C + bus to be wedged. + minItems: 1 + items: + - const: default + - const: unwedge + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port(@0)?$": + $ref: /schemas/graph.yaml#/properties/port + description: Input of the DWC HDMI TX + properties: + endpoint: + description: Connection to the VOP + endpoint@0: + description: Connection to the VOPB + endpoint@1: + description: Connection to the VOPL + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output of the DWC HDMI TX + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the GRF to mux vopl/vopb. + +required: + - compatible + - reg + - reg-io-width + - clocks + - clock-names + - interrupts + - ports + - rockchip,grf + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + ddc-i2c-bus = <&i2c5>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + + ports { + port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml new file mode 100644 index 000000000..1a68a940d --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3066 HDMI controller + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3066-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: hclk + + power-domains: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with two endpoints, numbered 0 and 1, + connected respectively to vop0 and vop1. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-0 + - pinctrl-names + - power-domains + - rockchip,grf + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3066a-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/power/rk3066-power.h> + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + pinctrl-names = "default"; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + + pinctrl { + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml new file mode 100644 index 000000000..a8d18a37c --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DRM master device + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip DRM master device is a virtual device needed to list all + vop devices or other display interface nodes that comprise the + graphics subsystem. + +properties: + compatible: + const: rockchip,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: | + Should contain a list of phandles pointing to display interface port + of vop devices. vop definitions as defined in + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 000000000..aaf8c44cf --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,92 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + - "rockchip,px30-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +- phys: LVDS/DSI DPHY (px30 only) +- phy-names: name of the PHY, must be "dphy" (px30 only) + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml new file mode 100644 index 000000000..6f43d885c --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP) + +description: + VOP (Video Output Processor) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-vop-big + - rockchip,px30-vop-lit + - rockchip,rk3036-vop + - rockchip,rk3066-vop + - rockchip,rk3126-vop + - rockchip,rk3188-vop + - rockchip,rk3228-vop + - rockchip,rk3288-vop + - rockchip,rk3328-vop + - rockchip,rk3366-vop + - rockchip,rk3368-vop + - rockchip,rk3399-vop-big + - rockchip,rk3399-vop-lit + + reg: + minItems: 1 + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Pixel clock. + - description: Clock for the ahb bus to R/W the phy regs. + + clock-names: + items: + - const: aclk_vop + - const: dclk_vop + - const: hclk_vop + + resets: + maxItems: 3 + + reset-names: + items: + - const: axi + - const: ahb + - const: dclk + + port: + $ref: /schemas/graph.yaml#/properties/port + + assigned-clocks: + maxItems: 2 + + assigned-clock-rates: + maxItems: 2 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3288-power.h> + vopb: vopb@ff930000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff930000 0x19c>, + <0xff931000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP0>, + <&cru DCLK_VOP0>, + <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_LCDC1_AXI>, + <&cru SRST_LCDC1_AHB>, + <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + vopb_out_edp: endpoint@0 { + reg = <0>; + remote-endpoint=<&edp_in_vopb>; + }; + vopb_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint=<&hdmi_in_vopb>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml new file mode 100644 index 000000000..fba45091d --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP2) + +description: + VOP2 (Video Output Processor v2) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3566-vop + - rockchip,rk3568-vop + + reg: + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + reg-names: + items: + - const: vop + - const: gamma-lut + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Clock for the ahb bus to R/W the phy regs. + - description: Pixel clock for video port 0. + - description: Pixel clock for video port 1. + - description: Pixel clock for video port 2. + + clock-names: + items: + - const: aclk + - const: hclk + - const: dclk_vp0 + - const: dclk_vp1 + - const: dclk_vp2 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to GRF regs used for misc control + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP1 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP2 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3568-power.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + vop: vop@fe040000 { + compatible = "rockchip,rk3568-vop"; + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2"; + power-domains = <&power RK3568_PD_VO>; + iommus = <&vop_mmu>; + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; |