summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt')
-rw-r--r--Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt61
1 files changed, 61 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 000000000..3932e7665
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+ 0 - Raw Bayer Interface.
+ 1 - 8 Bit BT656 Interface.
+ 2 - 10 Bit BT656 Interface.
+ 3 - YCbCr 8 Bit Interface.
+ 4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ vpfe: vpfe@f0034000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe_pins_default>;
+ pinctrl-1 = <&vpfe_pins_sleep>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ i2c1: i2c@4802a000 {
+
+ ov2659@30 {
+ compatible = "ti,ov2659";
+ reg = <0x30>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ bus-width = <8>;
+ mclk-frequency = <12000000>;
+ };
+ };
+ };