diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/qcom,ipa.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/qcom,ipa.yaml | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml new file mode 100644 index 000000000..dd4bb2e74 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IP Accelerator (IPA) + +maintainers: + - Alex Elder <elder@kernel.org> + +description: + This binding describes the Qualcomm IPA. The IPA is capable of offloading + certain network processing tasks (e.g. filtering, routing, and NAT) from + the main processor. + + The IPA sits between multiple independent "execution environments," + including the Application Processor (AP) and the modem. The IPA presents + a Generic Software Interface (GSI) to each execution environment. + The GSI is an integral part of the IPA, but it is logically isolated + and has a distinct interrupt and a separately-defined address space. + + See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt. See + iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU + bindings. + + + - | + -------- --------- + | | | | + | AP +<---. .----+ Modem | + | +--. | | .->+ | + | | | | | | | | + -------- | | | | --------- + v | v | + --+-+---+-+-- + | GSI | + |-----------| + | | + | IPA | + | | + ------------- + +properties: + compatible: + enum: + - qcom,msm8998-ipa + - qcom,sc7180-ipa + - qcom,sc7280-ipa + - qcom,sdm845-ipa + - qcom,sdx55-ipa + - qcom,sm8350-ipa + + reg: + items: + - description: IPA registers + - description: IPA shared memory + - description: GSI registers + + reg-names: + items: + - const: ipa-reg + - const: ipa-shared + - const: gsi + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + const: core + + interrupts: + items: + - description: IPA interrupt (hardware IRQ) + - description: GSI interrupt (hardware IRQ) + - description: Modem clock query interrupt (smp2p interrupt) + - description: Modem setup ready interrupt (smp2p interrupt) + + interrupt-names: + items: + - const: ipa + - const: gsi + - const: ipa-clock-query + - const: ipa-setup-ready + + interconnects: + oneOf: + - items: + - description: Path leading to system memory + - description: Path between the AP and IPA config space + - items: + - description: Path leading to system memory + - description: Path leading to internal memory + - description: Path between the AP and IPA config space + + interconnect-names: + oneOf: + - items: + - const: memory + - const: config + - items: + - const: memory + - const: imem + - const: config + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the AOSS side-channel message RAM + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used in by the AP to signal the modem. + items: + - description: Whether the "ipa-clock-enabled" state bit is valid + - description: Whether the IPA clock is enabled (if valid) + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output + items: + - const: ipa-clock-enabled-valid + - const: ipa-clock-enabled + + modem-init: + type: boolean + description: + If present, it indicates that the modem is responsible for + performing early IPA initialization, including loading and + validating firwmare used by the GSI. + + memory-region: + maxItems: 1 + description: + If present, a phandle for a reserved memory area that holds + the firmware passed to Trust Zone for authentication. Required + when Trust Zone (not the modem) performs early initialization. + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + If present, name (or relative path) of the file within the + firmware search path containing the firmware image used when + initializing IPA hardware. Optional, and only used when + Trust Zone performs early initialization. + +required: + - compatible + - iommus + - reg + - clocks + - interrupts + - interconnects + - qcom,smem-states + +# Either modem-init is present, or memory-region must be present. +oneOf: + - required: + - modem-init + - required: + - memory-region + +# If memory-region is present, firmware-name may optionally be present. +# But if modem-init is present, firmware-name must not be present. +if: + required: + - modem-init +then: + not: + required: + - firmware-name + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + smp2p-mpss { + compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 6>; + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + ipa@1e40000 { + compatible = "qcom,sdm845-ipa"; + + modem-init; + + iommus = <&apps_smmu 0x720 0x3>; + reg = <0x1e40000 0x7000>, + <0x1e47000 0x2000>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = + <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>, + <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + }; |