summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml')
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml104
1 files changed, 104 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 000000000..7287d395e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+ - Jingoo Han <jingoohan1@gmail.com>
+ - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+ Synopsys DesignWare PCIe host controller
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ anyOf:
+ - {}
+ - const: snps,dw-pcie
+
+ reg:
+ description: |
+ It should contain Data Bus Interface (dbi) and config registers for all
+ versions.
+ For designware core version >= 4.80, it may contain ATU address space.
+ minItems: 2
+ maxItems: 5
+
+ reg-names:
+ minItems: 2
+ maxItems: 5
+ items:
+ enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
+ parf, cfg, link, ulreg, smu, mpu, apb, phy ]
+
+ num-lanes:
+ description: |
+ number of lanes to use (this property should be specified unless
+ the link is brought already up in firmware)
+ maximum: 16
+
+ reset-gpio:
+ description: GPIO pin number of PERST# signal
+ maxItems: 1
+ deprecated: true
+
+ reset-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+ interrupts: true
+
+ interrupt-names: true
+
+ clocks: true
+
+ snps,enable-cdm-check:
+ type: boolean
+ description: |
+ This is a boolean property and if present enables
+ automatic checking of CDM (Configuration Dependent Module) registers
+ for data corruption. CDM registers include standard PCIe configuration
+ space registers, Port Logic registers, DMA and iATU (internal Address
+ Translation Unit) registers.
+
+ num-viewport:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 256
+ description: |
+ number of view ports configured in hardware. If a platform
+ does not specify it, the driver autodetects it.
+ deprecated: true
+
+additionalProperties: true
+
+required:
+ - reg
+ - reg-names
+ - compatible
+
+examples:
+ - |
+ bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pcie@dfc00000 {
+ device_type = "pci";
+ compatible = "snps,dw-pcie";
+ reg = <0xdfc00000 0x0001000>, /* IP registers */
+ <0xd0000000 0x0002000>; /* Configuration space */
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+ <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+ interrupts = <25>, <24>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ };
+ };