1 files changed, 94 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
new file mode 100644
index 000000000..5ffd0f55d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -0,0 +1,94 @@
+MVEBU comphy drivers
+--------------------
+
+COMPHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 7k/8k (on the CP110)
+* Armada 3700
+It provides a number of shared PHYs used by various interfaces (network, SATA,
+USB, PCIe...).
+
+Required properties:
+
+- compatible: should be one of:
+  * "marvell,comphy-cp110" for Armada 7k/8k
+  * "marvell,comphy-a3700" for Armada 3700
+- reg: should contain the COMPHY register(s) location(s) and length(s).
+  * 1 entry for Armada 7k/8k
+  * 4 entries for Armada 3700 along with the corresponding reg-names
+    properties, memory areas are:
+    * Generic COMPHY registers
+    * Lane 1 (PCIe/GbE)
+    * Lane 0 (USB3/GbE)
+    * Lane 2 (SATA/USB3)
+- marvell,system-controller: should contain a phandle to the system
+			     controller node (only for Armada 7k/8k)
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional properlties:
+
+- clocks: pointers to the reference clocks for this device (CP110 only),
+          consequently: MG clock, MG Core clock, AXI clock.
+- clock-names: names of used clocks for CP110 only, must be :
+               "mg_clk", "mg_core_clk" and "axi_clk".
+
+A sub-node is required for each comphy lane provided by the comphy.
+
+Required properties (child nodes):
+
+- reg: COMPHY lane number.
+- #phy-cells : from the generic PHY bindings, must be 1. Defines the
+               input port to use for a given comphy lane.
+
+Examples:
+
+	CP11X_LABEL(comphy): phy@120000 {
+		compatible = "marvell,comphy-cp110";
+		reg = <0x120000 0x6000>;
+		marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+		clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+			 <&CP11X_LABEL(clk) 1 18>;
+		clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CP11X_LABEL(comphy0): phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		CP11X_LABEL(comphy1): phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+	};
+
+	comphy: phy@18300 {
+		compatible = "marvell,comphy-a3700";
+		reg = <0x18300 0x300>,
+		<0x1F000 0x400>,
+		<0x5C000 0x400>,
+		<0xe0178 0x8>;
+		reg-names = "comphy",
+		"lane1_pcie_gbe",
+		"lane0_usb3_gbe",
+		"lane2_sata_usb3";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+
+		comphy0: phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		comphy1: phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+
+		comphy2: phy@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};