1 files changed, 158 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 000000000..c44d02d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM8250 platform.
+
+properties:
+  compatible:
+    const: qcom,sm8250-pinctrl
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "south"
+      - const: "north"
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent: true
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins.
+
+          enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+                  cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+                  cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                  ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                  ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                  mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                  mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                  mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+                  pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                  pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+                  qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+                  qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+                  qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+                  sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+                  tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+                  tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+                  tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+
+      allOf:
+        - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+        - if:
+            properties:
+              pins:
+                pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+          then:
+            required:
+              - function
+
+      additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@1f00000 {
+            compatible = "qcom,sm8250-pinctrl";
+            reg = <0x0f100000 0x300000>,
+                  <0x0f500000 0x300000>,
+                  <0x0f900000 0x300000>;
+            reg-names = "west", "south", "north";
+            interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-ranges = <&tlmm 0 0 180>;
+            wakeup-parent = <&pdc>;
+    };