1 files changed, 98 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
new file mode 100644
index 000000000..12aeddedd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6236x Voltage Regulators
+
+maintainers:
+  - Laxman Dewangan <ldewangan@nvidia.com>
+
+description: |
+  The TPS6236x are a family of step down dc-dc converter with
+  an input voltage range of 2.5V to 5.5V. The devices provide
+  up to 3A peak load current, and an output voltage range of
+  0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps62360
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62360
+      - ti,tps62361
+      - ti,tps62362
+      - ti,tps62363
+
+  reg:
+    maxItems: 1
+
+  ti,vsel0-gpio:
+    description: |
+      GPIO for controlling VSEL0 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL0 control.
+    maxItems: 1
+
+  ti,vsel1-gpio:
+    description: |
+      GPIO for controlling VSEL1 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL1 control.
+    maxItems: 1
+
+  ti,enable-vout-discharge:
+    description: Enable output discharge.
+    type: boolean
+
+  ti,enable-pull-down:
+    description: Enable pull down.
+    type: boolean
+
+  ti,vsel0-state-high:
+    description: |
+      Initial state of VSEL0 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+  ti,vsel1-state-high:
+    description: |
+      Initial state of VSEL1 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@60 {
+            compatible = "ti,tps62361";
+            reg = <0x60>;
+            regulator-name = "tps62361-vout";
+            regulator-min-microvolt = <500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-boot-on;
+            ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+            ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            ti,vsel0-state-high;
+            ti,vsel1-state-high;
+            ti,enable-pull-down;
+            ti,enable-vout-discharge;
+        };
+    };
+
+...