diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml new file mode 100644 index 000000000..795bd8cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Point 2 Point + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory Point to Point (SMP2P) protocol facilitates communication + of a single 32-bit value between two processors. Each value has a single + writer (the local side) and a single reader (the remote side). Values are + uniquely identified in the system by the directed edge (local processor ID to + remote processor ID) and a string identifier. + +properties: + compatible: + const: qcom,smp2p + + interrupts: + maxItems: 1 + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote end of the smp2p edge. + + qcom,local-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the local endpoint of this edge. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote endpoint of this edge. + + qcom,smem: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maxItems: 2 + description: + Two identifiers of the inbound and outbound smem items used for this edge. + +patternProperties: + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$": + type: object + description: + Each SMP2P pair contain a set of inbound and outbound entries, these are + described in subnodes of the smp2p device node. The node names are not + important. + + properties: + interrupt-controller: + description: + Marks the entry as inbound; the node should be specified as a two + cell interrupt-controller. If not specified this node will denote + the outgoing entry. + + '#interrupt-cells': + const: 2 + + qcom,entry-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of this entry, for inbound entries this will be used to + match against the remotely allocated entry and for outbound entries + this name is used for allocating entries. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for outgoing entries. + + required: + - qcom,entry-name + + oneOf: + - required: + - interrupt-controller + - '#interrupt-cells' + - required: + - '#qcom,smem-state-cells' + + additionalProperties: false + +required: + - compatible + - interrupts + - qcom,local-pid + - qcom,remote-pid + - qcom,smem + +oneOf: + - required: + - mboxes + - required: + - qcom,ipc + +additionalProperties: false + +examples: + # The following example shows the SMP2P setup with the wireless processor, + # defined from the 8974 apps processor's point-of-view. It encompasses one + # inbound and one outbound entry. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smp2p"; + qcom,smem = <431>, <451>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; |