diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/simple-card.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/simple-card.yaml | 500 |
1 files changed, 500 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml new file mode 100644 index 000000000..ed19899bc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -0,0 +1,500 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/simple-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Audio Card Driver + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +definitions: + + frame-master: + description: Indicates dai-link frame master. + $ref: /schemas/types.yaml#/definitions/phandle + + bitclock-master: + description: Indicates dai-link bit clock master + $ref: /schemas/types.yaml#/definitions/phandle + + frame-inversion: + description: dai-link uses frame clock inversion + $ref: /schemas/types.yaml#/definitions/flag + + bitclock-inversion: + description: dai-link uses bit clock inversion + $ref: /schemas/types.yaml#/definitions/flag + + dai-tdm-slot-num: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + dai-tdm-slot-width: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + system-clock-frequency: + description: | + If a clock is specified and a multiplication factor is given with + mclk-fs, the clock will be set to the calculated mclk frequency + when the stream starts. + $ref: /schemas/types.yaml#/definitions/uint32 + + system-clock-direction-out: + description: | + specifies clock direction as 'out' on initialization. + It is useful for some aCPUs with fixed clocks. + $ref: /schemas/types.yaml#/definitions/flag + + system-clock-fixed: + description: | + Specifies that the clock frequency should not be modified. + Implied when system-clock-frequency is specified, but can be used when + a clock is mapped to the device whose frequency cannot or should not be + changed. When mclk-fs is also specified, this restricts the device to a + single fixed sampling rate. + $ref: /schemas/types.yaml#/definitions/flag + + mclk-fs: + description: | + Multiplication factor between stream rate and codec mclk. + When defined, mclk-fs property defined in dai-link sub nodes are ignored. + $ref: /schemas/types.yaml#/definitions/uint32 + + aux-devs: + description: | + List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. + $ref: /schemas/types.yaml#/definitions/phandle-array + + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 + + prefix: + description: "device name prefix" + $ref: /schemas/types.yaml#/definitions/string + + label: + maxItems: 1 + + routing: + description: | + A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + widgets: + description: User specified audio sound widgets. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + pin-switches: + description: the widget names for which pin switches must be created. + $ref: /schemas/types.yaml#/definitions/string-array + + format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + - ac97 + - pdm + - msb + - lsb + + dai: + type: object + properties: + sound-dai: + maxItems: 1 + + # common properties + mclk-fs: + $ref: "#/definitions/mclk-fs" + prefix: + $ref: "#/definitions/prefix" + frame-inversion: + $ref: "#/definitions/frame-inversion" + bitclock-inversion: + $ref: "#/definitions/bitclock-inversion" + frame-master: + $ref: /schemas/types.yaml#/definitions/flag + bitclock-master: + $ref: /schemas/types.yaml#/definitions/flag + + dai-tdm-slot-num: + $ref: "#/definitions/dai-tdm-slot-num" + dai-tdm-slot-width: + $ref: "#/definitions/dai-tdm-slot-width" + clocks: + maxItems: 1 + system-clock-frequency: + $ref: "#/definitions/system-clock-frequency" + system-clock-direction-out: + $ref: "#/definitions/system-clock-direction-out" + system-clock-fixed: + $ref: "#/definitions/system-clock-fixed" + required: + - sound-dai + +properties: + compatible: + contains: + enum: + - simple-audio-card + - simple-scu-audio-card + + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + label: + $ref: "#/definitions/label" + + simple-audio-card,name: + description: User specified audio sound card name. + $ref: /schemas/types.yaml#/definitions/string + + simple-audio-card,widgets: + $ref: "#/definitions/widgets" + simple-audio-card,routing: + $ref: "#/definitions/routing" + + # common properties + simple-audio-card,frame-master: + $ref: "#/definitions/frame-master" + simple-audio-card,bitclock-master: + $ref: "#/definitions/bitclock-master" + simple-audio-card,frame-inversion: + $ref: "#/definitions/frame-inversion" + simple-audio-card,bitclock-inversion: + $ref: "#/definitions/bitclock-inversion" + simple-audio-card,format: + $ref: "#/definitions/format" + simple-audio-card,mclk-fs: + $ref: "#/definitions/mclk-fs" + simple-audio-card,aux-devs: + $ref: "#/definitions/aux-devs" + simple-audio-card,convert-rate: + $ref: "#/definitions/convert-rate" + simple-audio-card,convert-channels: + $ref: "#/definitions/convert-channels" + simple-audio-card,prefix: + $ref: "#/definitions/prefix" + simple-audio-card,pin-switches: + $ref: "#/definitions/pin-switches" + simple-audio-card,hp-det-gpio: + maxItems: 1 + simple-audio-card,mic-det-gpio: + maxItems: 1 + +patternProperties: + "^simple-audio-card,cpu(@[0-9a-f]+)?$": + $ref: "#/definitions/dai" + "^simple-audio-card,codec(@[0-9a-f]+)?$": + $ref: "#/definitions/dai" + + "^simple-audio-card,dai-link(@[0-9a-f]+)?$": + description: | + Container for dai-link level properties and the CPU and CODEC sub-nodes. + This container may be omitted when the card has only one DAI link. + type: object + properties: + reg: + maxItems: 1 + + # common properties + frame-master: + $ref: "#/definitions/frame-master" + bitclock-master: + $ref: "#/definitions/bitclock-master" + frame-inversion: + $ref: "#/definitions/frame-inversion" + bitclock-inversion: + $ref: "#/definitions/bitclock-inversion" + format: + $ref: "#/definitions/format" + mclk-fs: + $ref: "#/definitions/mclk-fs" + aux-devs: + $ref: "#/definitions/aux-devs" + convert-rate: + $ref: "#/definitions/convert-rate" + convert-channels: + $ref: "#/definitions/convert-channels" + prefix: + $ref: "#/definitions/prefix" + pin-switches: + $ref: "#/definitions/pin-switches" + hp-det-gpio: + maxItems: 1 + mic-det-gpio: + maxItems: 1 + + patternProperties: + "^cpu(@[0-9a-f]+)?": + $ref: "#/definitions/dai" + "^codec(@[0-9a-f]+)?": + $ref: "#/definitions/dai" + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: +#-------------------- +# single DAI link +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "VF610-Tower-Sound-Card"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + + dailink0_master: simple-audio-card,codec { + sound-dai = <&ak4648>; + clocks = <&osc>; + }; + }; + +#-------------------- +# Multi DAI links +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Cubox Audio"; + + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { /* I2S - HDMI */ + reg = <0>; + format = "i2s"; + cpu { + sound-dai = <&audio0>; + }; + codec { + sound-dai = <&tda998x0>; + }; + }; + + simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */ + reg = <1>; + cpu { + sound-dai = <&audio1>; + }; + codec { + sound-dai = <&tda998x1>; + }; + }; + + simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */ + reg = <2>; + cpu { + sound-dai = <&audio2>; + }; + codec { + sound-dai = <&spdif_codec>; + }; + }; + }; + +#-------------------- +# route audio from IMX6 SSI2 through TLV320DAC3100 codec +# through TPA6130A2 amplifier to headphones: +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&>; + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clocks>; + }; + }; + +#-------------------- +# Sampling Rate Conversion +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + simple-audio-card,convert-rate = <48000>; + + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "DAI0 Capture", "ak4642 Capture"; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; + }; + +#-------------------- +# 2 CPU 1 Codec (Mixing) +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dpcmcpu>; + simple-audio-card,frame-master = <&dpcmcpu>; + + simple-audio-card,convert-rate = <48000>; + simple-audio-card,convert-channels = <2>; + + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "ak4642 Playback", "DAI1 Playback"; + + dpcmcpu: simple-audio-card,cpu@0 { + reg = <0>; + sound-dai = <&rcar_sound 0>; + }; + + simple-audio-card,cpu@1 { + reg = <1>; + sound-dai = <&rcar_sound 1>; + }; + + simple-audio-card,codec { + prefix = "ak4642"; + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; + }; + +#-------------------- +# Multi DAI links with DPCM: +# +# CPU0 ------ ak4613 +# CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */ +# CPU2 --/ /* DPCM 3ch/4ch */ +# CPU3 --/ /* DPCM 5ch/6ch */ +# CPU4 --/ /* DPCM 7ch/8ch */ +# CPU5 ------ PCM3168A-c +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,routing = + "pcm3168a Playback", "DAI1 Playback", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback"; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&rcar_sound 0>; + }; + codec { + sound-dai = <&ak4613>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + format = "i2s"; + bitclock-master = <&sndcpu1>; + frame-master = <&sndcpu1>; + + convert-channels = <8>; /* TDM Split */ + + sndcpu1: cpu0 { + sound-dai = <&rcar_sound 1>; + }; + cpu1 { + sound-dai = <&rcar_sound 2>; + }; + cpu2 { + sound-dai = <&rcar_sound 3>; + }; + cpu3 { + sound-dai = <&rcar_sound 4>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + dai-tdm-slot-num = <8>; + sound-dai = <&pcm3168a 0>; + }; + }; + + simple-audio-card,dai-link@2 { + reg = <2>; + format = "i2s"; + bitclock-master = <&sndcpu2>; + frame-master = <&sndcpu2>; + + sndcpu2: cpu { + sound-dai = <&rcar_sound 5>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + sound-dai = <&pcm3168a 1>; + }; + }; + }; |