summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi259
1 files changed, 259 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
new file mode 100644
index 000000000..b3c9952ac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+ /*
+ * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
+ * Adding it will cause the bootloader to go crazy and randomly crash
+ * shortly after closing UEFI boot services.. Perhaps that has something
+ * to do with the OS running inside a VM now..?
+ */
+
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@e1000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0xe1000000 0 0x2300000>;
+
+ /* The display, even though it's 4K, initializes at 1080-ish p */
+ width = <1096>;
+ height = <2560>;
+ stride = <(1096 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
+
+ key-vol-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+ };
+
+ reserved-memory {
+ cont_splash_mem: memory@e1000000 {
+ reg = <0 0xe1000000 0 0x2300000>;
+ no-map;
+ };
+
+ ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0 0xffc00000 0 0x100000>;
+ console-size = <0x40000>;
+ record-size = <0x1000>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ status = "okay";
+ firmware-name = "qcom/adsp.mbn";
+};
+
+&cdsp {
+ status = "okay";
+ firmware-name = "qcom/cdsp.mbn";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ cs35l41_l: cs35l41@40 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x40>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+
+ cs35l41_r: cs35l41@41 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+ /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c15 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&ipa {
+ status = "okay";
+ memory-region = <&pil_ipa_fw_mem>;
+ firmware-name = "qcom/ipa_fws.mbn";
+};
+
+&mpss {
+ status = "okay";
+ firmware-name = "qcom/modem.mbn";
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&slpi {
+ status = "okay";
+ firmware-name = "qcom/slpi.mbn";
+};
+
+&spi14 {
+ status = "okay";
+
+ /* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+ gpio-reserved-ranges = <44 4>;
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
+&usb_1 {
+ status = "okay";
+
+ qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+
+ maximum-speed = "high-speed";
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+};