1 files changed, 426 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
new file mode 100644
index 000000000..0e42f7bad
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Common routines for Tundra Semiconductor TSI108 host bridge.
+ *
+ * 2004-2005 (c) Tundra Semiconductor Corp.
+ * Author: Alex Bounine (alexandreb@tundra.com)
+ * Author: Roy Zang (tie-fei.zang@freescale.com)
+ * 	   Add pci interrupt router host
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/tsi108.h>
+#include <asm/tsi108_pci.h>
+#include <asm/tsi108_irq.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define tsi_mk_config_addr(bus, devfunc, offset) \
+	((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
+
+u32 tsi108_pci_cfg_base;
+static u32 tsi108_pci_cfg_phys;
+u32 tsi108_csr_vir_base;
+static struct irq_domain *pci_irq_host;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_read_reg(u32 reg_offset);
+extern void tsi108_write_reg(u32 reg_offset, u32 val);
+
+int
+tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
+			   int offset, int len, u32 val)
+{
+	volatile unsigned char *cfg_addr;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
+							devfunc, offset) |
+							(offset & 0x03));
+
+#ifdef DEBUG
+	printk("PCI CFG write : ");
+	printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
+	printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
+	printk("data = 0x%08x\n", val);
+#endif
+
+	switch (len) {
+	case 1:
+		out_8((u8 *) cfg_addr, val);
+		break;
+	case 2:
+		out_le16((u16 *) cfg_addr, val);
+		break;
+	default:
+		out_le32((u32 *) cfg_addr, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+void tsi108_clear_pci_error(u32 pci_cfg_base)
+{
+	u32 err_stat, err_addr, pci_stat;
+
+	/*
+	 * Quietly clear PB and PCI error flags set as result
+	 * of PCI/X configuration read requests.
+	 */
+
+	/* Read PB Error Log Registers */
+
+	err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
+	err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
+
+	if (err_stat & TSI108_PB_ERRCS_ES) {
+		/* Clear error flag */
+		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
+				 TSI108_PB_ERRCS_ES);
+
+		/* Clear read error reported in PB_ISR */
+		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
+				 TSI108_PB_ISR_PBS_RD_ERR);
+
+		/* Clear PCI/X bus cfg errors if applicable */
+		if ((err_addr & 0xFF000000) == pci_cfg_base) {
+			pci_stat =
+			    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
+			tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
+					 pci_stat);
+		}
+	}
+
+	return;
+}
+
+#define __tsi108_read_pci_config(x, addr, op)		\
+	__asm__ __volatile__(				\
+		"	"op" %0,0,%1\n"		\
+		"1:	eieio\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,-1\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		EX_TABLE(1b, 3b)			\
+		: "=r"(x) : "r"(addr))
+
+int
+tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+			  int len, u32 * val)
+{
+	volatile unsigned char *cfg_addr;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	u32 temp;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
+							devfn,
+							offset) | (offset &
+								   0x03));
+
+	switch (len) {
+	case 1:
+		__tsi108_read_pci_config(temp, cfg_addr, "lbzx");
+		break;
+	case 2:
+		__tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
+		break;
+	default:
+		__tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
+		break;
+	}
+
+	*val = temp;
+
+#ifdef DEBUG
+	if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
+		printk("PCI CFG read : ");
+		printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
+		printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
+		printk("data = 0x%x\n", *val);
+	}
+#endif
+	return PCIBIOS_SUCCESSFUL;
+}
+
+void tsi108_clear_pci_cfg_error(void)
+{
+	tsi108_clear_pci_error(tsi108_pci_cfg_phys);
+}
+
+static struct pci_ops tsi108_direct_pci_ops = {
+	.read = tsi108_direct_read_config,
+	.write = tsi108_direct_write_config,
+};
+
+int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int has_address = 0;
+
+	/* PCI Config mapping */
+	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
+	tsi108_pci_cfg_phys = cfg_phys;
+	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
+	    tsi108_pci_cfg_base);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
+		       " bus 0\n", dev);
+	}
+
+	hose = pcibios_alloc_controller(dev);
+
+	if (!hose) {
+		printk("PCI Host bridge init failed\n");
+		return -ENOMEM;
+	}
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	(hose)->ops = &tsi108_direct_pci_ops;
+
+	pr_info("Found tsi108 PCI host bridge at 0x%pa. Firmware bus number: %d->%d\n",
+		&rsrc.start, hose->first_busno, hose->last_busno);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+	return 0;
+}
+
+/*
+ * Low level utility functions
+ */
+
+static void tsi108_pci_int_mask(u_int irq)
+{
+	u_int irp_cfg;
+	int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+	mb();
+	irp_cfg |= (1 << int_line);	/* INTx_DIR = output */
+	irp_cfg &= ~(3 << (8 + (int_line * 2)));	/* INTx_TYPE = unused */
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+	mb();
+	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+}
+
+static void tsi108_pci_int_unmask(u_int irq)
+{
+	u_int irp_cfg;
+	int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+	mb();
+	irp_cfg &= ~(1 << int_line);
+	irp_cfg |= (3 << (8 + (int_line * 2)));
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+	mb();
+}
+
+static void __init init_pci_source(void)
+{
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
+			0x0000ff00);
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+			TSI108_PCI_IRP_ENABLE_P_INT);
+	mb();
+}
+
+static inline unsigned int get_pci_source(void)
+{
+	u_int temp = 0;
+	int irq = -1;
+	int i;
+	u_int pci_irp_stat;
+	static int mask = 0;
+
+	/* Read PCI/X block interrupt status register */
+	pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+	mb();
+
+	if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
+		/* Process Interrupt from PCI bus INTA# - INTD# lines */
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET +
+				    TSI108_PCI_IRP_INTAD) & 0xf;
+		mb();
+		for (i = 0; i < 4; i++, mask++) {
+			if (temp & (1 << mask % 4)) {
+				irq = IRQ_PCI_INTA + mask % 4;
+				mask++;
+				break;
+			}
+		}
+
+		/* Disable interrupts from PCI block */
+		temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+		tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+				temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
+		mb();
+		(void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+		mb();
+	}
+#ifdef DEBUG
+	else {
+		printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
+		pci_irp_stat =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
+		mb();
+		printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+		mb();
+		printk("cfg_ctl=0x%08x ", temp);
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+		mb();
+		printk("irp_enable=0x%08x\n", temp);
+	}
+#endif	/* end of DEBUG */
+
+	return irq;
+}
+
+
+/*
+ * Linux descriptor level callbacks
+ */
+
+static void tsi108_pci_irq_unmask(struct irq_data *d)
+{
+	tsi108_pci_int_unmask(d->irq);
+
+	/* Enable interrupts from PCI block */
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+			 tsi108_read_reg(TSI108_PCI_OFFSET +
+					 TSI108_PCI_IRP_ENABLE) |
+			 TSI108_PCI_IRP_ENABLE_P_INT);
+	mb();
+}
+
+static void tsi108_pci_irq_mask(struct irq_data *d)
+{
+	tsi108_pci_int_mask(d->irq);
+}
+
+static void tsi108_pci_irq_ack(struct irq_data *d)
+{
+	tsi108_pci_int_mask(d->irq);
+}
+
+/*
+ * Interrupt controller descriptor for cascaded PCI interrupt controller.
+ */
+
+static struct irq_chip tsi108_pci_irq = {
+	.name = "tsi108_PCI_int",
+	.irq_mask = tsi108_pci_irq_mask,
+	.irq_ack = tsi108_pci_irq_ack,
+	.irq_unmask = tsi108_pci_irq_unmask,
+};
+
+static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct,
+			    const u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	*out_hwirq = intspec[0];
+	*out_flags = IRQ_TYPE_LEVEL_HIGH;
+	return 0;
+}
+
+static int pci_irq_host_map(struct irq_domain *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{	unsigned int irq;
+	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
+	if ((virq >= 1) && (virq <= 4)){
+		irq = virq + IRQ_PCI_INTAD_BASE - 1;
+		irq_set_status_flags(irq, IRQ_LEVEL);
+		irq_set_chip(irq, &tsi108_pci_irq);
+	}
+	return 0;
+}
+
+static const struct irq_domain_ops pci_irq_domain_ops = {
+	.map = pci_irq_host_map,
+	.xlate = pci_irq_host_xlate,
+};
+
+/*
+ * Exported functions
+ */
+
+/*
+ * The Tsi108 PCI interrupts initialization routine.
+ *
+ * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
+ * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
+ * PCI block has to be treated as a cascaded interrupt controller connected
+ * to the MPIC.
+ */
+
+void __init tsi108_pci_int_init(struct device_node *node)
+{
+	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
+
+	pci_irq_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0,
+					     &pci_irq_domain_ops, NULL);
+	if (pci_irq_host == NULL) {
+		printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
+		return;
+	}
+
+	init_pci_source();
+}
+
+void tsi108_irq_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int cascade_irq = get_pci_source();
+
+	if (cascade_irq)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}