diff options
Diffstat (limited to 'arch/x86/kernel/cpu/microcode')
| -rw-r--r-- | arch/x86/kernel/cpu/microcode/Makefile | 5 | ||||
| -rw-r--r-- | arch/x86/kernel/cpu/microcode/amd.c | 972 | ||||
| -rw-r--r-- | arch/x86/kernel/cpu/microcode/core.c | 810 | ||||
| -rw-r--r-- | arch/x86/kernel/cpu/microcode/intel.c | 941 |
4 files changed, 2728 insertions, 0 deletions
diff --git a/arch/x86/kernel/cpu/microcode/Makefile b/arch/x86/kernel/cpu/microcode/Makefile new file mode 100644 index 000000000..34098d48c --- /dev/null +++ b/arch/x86/kernel/cpu/microcode/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +microcode-y := core.o +obj-$(CONFIG_MICROCODE) += microcode.o +microcode-$(CONFIG_MICROCODE_INTEL) += intel.o +microcode-$(CONFIG_MICROCODE_AMD) += amd.o diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c new file mode 100644 index 000000000..9a3092ec9 --- /dev/null +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -0,0 +1,972 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * AMD CPU Microcode Update Driver for Linux + * + * This driver allows to upgrade microcode on F10h AMD + * CPUs and later. + * + * Copyright (C) 2008-2011 Advanced Micro Devices Inc. + * 2013-2018 Borislav Petkov <bp@alien8.de> + * + * Author: Peter Oruba <peter.oruba@amd.com> + * + * Based on work by: + * Tigran Aivazian <aivazian.tigran@gmail.com> + * + * early loader: + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * + * Author: Jacob Shin <jacob.shin@amd.com> + * Fixes: Borislav Petkov <bp@suse.de> + */ +#define pr_fmt(fmt) "microcode: " fmt + +#include <linux/earlycpio.h> +#include <linux/firmware.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/initrd.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +#include <asm/microcode_amd.h> +#include <asm/microcode.h> +#include <asm/processor.h> +#include <asm/setup.h> +#include <asm/cpu.h> +#include <asm/msr.h> + +static struct equiv_cpu_table { + unsigned int num_entries; + struct equiv_cpu_entry *entry; +} equiv_table; + +/* + * This points to the current valid container of microcode patches which we will + * save from the initrd/builtin before jettisoning its contents. @mc is the + * microcode patch we found to match. + */ +struct cont_desc { + struct microcode_amd *mc; + u32 cpuid_1_eax; + u32 psize; + u8 *data; + size_t size; +}; + +static u32 ucode_new_rev; + +/* One blob per node. */ +static u8 amd_ucode_patch[MAX_NUMNODES][PATCH_MAX_SIZE]; + +/* + * Microcode patch container file is prepended to the initrd in cpio + * format. See Documentation/x86/microcode.rst + */ +static const char +ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin"; + +static u16 find_equiv_id(struct equiv_cpu_table *et, u32 sig) +{ + unsigned int i; + + if (!et || !et->num_entries) + return 0; + + for (i = 0; i < et->num_entries; i++) { + struct equiv_cpu_entry *e = &et->entry[i]; + + if (sig == e->installed_cpu) + return e->equiv_cpu; + + e++; + } + return 0; +} + +/* + * Check whether there is a valid microcode container file at the beginning + * of @buf of size @buf_size. Set @early to use this function in the early path. + */ +static bool verify_container(const u8 *buf, size_t buf_size, bool early) +{ + u32 cont_magic; + + if (buf_size <= CONTAINER_HDR_SZ) { + if (!early) + pr_debug("Truncated microcode container header.\n"); + + return false; + } + + cont_magic = *(const u32 *)buf; + if (cont_magic != UCODE_MAGIC) { + if (!early) + pr_debug("Invalid magic value (0x%08x).\n", cont_magic); + + return false; + } + + return true; +} + +/* + * Check whether there is a valid, non-truncated CPU equivalence table at the + * beginning of @buf of size @buf_size. Set @early to use this function in the + * early path. + */ +static bool verify_equivalence_table(const u8 *buf, size_t buf_size, bool early) +{ + const u32 *hdr = (const u32 *)buf; + u32 cont_type, equiv_tbl_len; + + if (!verify_container(buf, buf_size, early)) + return false; + + cont_type = hdr[1]; + if (cont_type != UCODE_EQUIV_CPU_TABLE_TYPE) { + if (!early) + pr_debug("Wrong microcode container equivalence table type: %u.\n", + cont_type); + + return false; + } + + buf_size -= CONTAINER_HDR_SZ; + + equiv_tbl_len = hdr[2]; + if (equiv_tbl_len < sizeof(struct equiv_cpu_entry) || + buf_size < equiv_tbl_len) { + if (!early) + pr_debug("Truncated equivalence table.\n"); + + return false; + } + + return true; +} + +/* + * Check whether there is a valid, non-truncated microcode patch section at the + * beginning of @buf of size @buf_size. Set @early to use this function in the + * early path. + * + * On success, @sh_psize returns the patch size according to the section header, + * to the caller. + */ +static bool +__verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize, bool early) +{ + u32 p_type, p_size; + const u32 *hdr; + + if (buf_size < SECTION_HDR_SIZE) { + if (!early) + pr_debug("Truncated patch section.\n"); + + return false; + } + + hdr = (const u32 *)buf; + p_type = hdr[0]; + p_size = hdr[1]; + + if (p_type != UCODE_UCODE_TYPE) { + if (!early) + pr_debug("Invalid type field (0x%x) in container file section header.\n", + p_type); + + return false; + } + + if (p_size < sizeof(struct microcode_header_amd)) { + if (!early) + pr_debug("Patch of size %u too short.\n", p_size); + + return false; + } + + *sh_psize = p_size; + + return true; +} + +/* + * Check whether the passed remaining file @buf_size is large enough to contain + * a patch of the indicated @sh_psize (and also whether this size does not + * exceed the per-family maximum). @sh_psize is the size read from the section + * header. + */ +static unsigned int __verify_patch_size(u8 family, u32 sh_psize, size_t buf_size) +{ + u32 max_size; + + if (family >= 0x15) + return min_t(u32, sh_psize, buf_size); + +#define F1XH_MPB_MAX_SIZE 2048 +#define F14H_MPB_MAX_SIZE 1824 + + switch (family) { + case 0x10 ... 0x12: + max_size = F1XH_MPB_MAX_SIZE; + break; + case 0x14: + max_size = F14H_MPB_MAX_SIZE; + break; + default: + WARN(1, "%s: WTF family: 0x%x\n", __func__, family); + return 0; + } + + if (sh_psize > min_t(u32, buf_size, max_size)) + return 0; + + return sh_psize; +} + +/* + * Verify the patch in @buf. + * + * Returns: + * negative: on error + * positive: patch is not for this family, skip it + * 0: success + */ +static int +verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size, bool early) +{ + struct microcode_header_amd *mc_hdr; + unsigned int ret; + u32 sh_psize; + u16 proc_id; + u8 patch_fam; + + if (!__verify_patch_section(buf, buf_size, &sh_psize, early)) + return -1; + + /* + * The section header length is not included in this indicated size + * but is present in the leftover file length so we need to subtract + * it before passing this value to the function below. + */ + buf_size -= SECTION_HDR_SIZE; + + /* + * Check if the remaining buffer is big enough to contain a patch of + * size sh_psize, as the section claims. + */ + if (buf_size < sh_psize) { + if (!early) + pr_debug("Patch of size %u truncated.\n", sh_psize); + + return -1; + } + + ret = __verify_patch_size(family, sh_psize, buf_size); + if (!ret) { + if (!early) + pr_debug("Per-family patch size mismatch.\n"); + return -1; + } + + *patch_size = sh_psize; + + mc_hdr = (struct microcode_header_amd *)(buf + SECTION_HDR_SIZE); + if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) { + if (!early) + pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n", mc_hdr->patch_id); + return -1; + } + + proc_id = mc_hdr->processor_rev_id; + patch_fam = 0xf + (proc_id >> 12); + if (patch_fam != family) + return 1; + + return 0; +} + +/* + * This scans the ucode blob for the proper container as we can have multiple + * containers glued together. Returns the equivalence ID from the equivalence + * table or 0 if none found. + * Returns the amount of bytes consumed while scanning. @desc contains all the + * data we're going to use in later stages of the application. + */ +static size_t parse_container(u8 *ucode, size_t size, struct cont_desc *desc) +{ + struct equiv_cpu_table table; + size_t orig_size = size; + u32 *hdr = (u32 *)ucode; + u16 eq_id; + u8 *buf; + + if (!verify_equivalence_table(ucode, size, true)) + return 0; + + buf = ucode; + + table.entry = (struct equiv_cpu_entry *)(buf + CONTAINER_HDR_SZ); + table.num_entries = hdr[2] / sizeof(struct equiv_cpu_entry); + + /* + * Find the equivalence ID of our CPU in this table. Even if this table + * doesn't contain a patch for the CPU, scan through the whole container + * so that it can be skipped in case there are other containers appended. + */ + eq_id = find_equiv_id(&table, desc->cpuid_1_eax); + + buf += hdr[2] + CONTAINER_HDR_SZ; + size -= hdr[2] + CONTAINER_HDR_SZ; + + /* + * Scan through the rest of the container to find where it ends. We do + * some basic sanity-checking too. + */ + while (size > 0) { + struct microcode_amd *mc; + u32 patch_size; + int ret; + + ret = verify_patch(x86_family(desc->cpuid_1_eax), buf, size, &patch_size, true); + if (ret < 0) { + /* + * Patch verification failed, skip to the next + * container, if there's one: + */ + goto out; + } else if (ret > 0) { + goto skip; + } + + mc = (struct microcode_amd *)(buf + SECTION_HDR_SIZE); + if (eq_id == mc->hdr.processor_rev_id) { + desc->psize = patch_size; + desc->mc = mc; + } + +skip: + /* Skip patch section header too: */ + buf += patch_size + SECTION_HDR_SIZE; + size -= patch_size + SECTION_HDR_SIZE; + } + + /* + * If we have found a patch (desc->mc), it means we're looking at the + * container which has a patch for this CPU so return 0 to mean, @ucode + * already points to the proper container. Otherwise, we return the size + * we scanned so that we can advance to the next container in the + * buffer. + */ + if (desc->mc) { + desc->data = ucode; + desc->size = orig_size - size; + + return 0; + } + +out: + return orig_size - size; +} + +/* + * Scan the ucode blob for the proper container as we can have multiple + * containers glued together. + */ +static void scan_containers(u8 *ucode, size_t size, struct cont_desc *desc) +{ + while (size) { + size_t s = parse_container(ucode, size, desc); + if (!s) + return; + + /* catch wraparound */ + if (size >= s) { + ucode += s; + size -= s; + } else { + return; + } + } +} + +static int __apply_microcode_amd(struct microcode_amd *mc) +{ + u32 rev, dummy; + + native_wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc->hdr.data_code); + + /* verify patch application was successful */ + native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); + if (rev != mc->hdr.patch_id) + return -1; + + return 0; +} + +/* + * Early load occurs before we can vmalloc(). So we look for the microcode + * patch container file in initrd, traverse equivalent cpu table, look for a + * matching microcode patch, and update, all in initrd memory in place. + * When vmalloc() is available for use later -- on 64-bit during first AP load, + * and on 32-bit during save_microcode_in_initrd_amd() -- we can call + * load_microcode_amd() to save equivalent cpu table and microcode patches in + * kernel heap memory. + * + * Returns true if container found (sets @desc), false otherwise. + */ +static bool +apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_patch) +{ + struct cont_desc desc = { 0 }; + u8 (*patch)[PATCH_MAX_SIZE]; + struct microcode_amd *mc; + u32 rev, dummy, *new_rev; + bool ret = false; + +#ifdef CONFIG_X86_32 + new_rev = (u32 *)__pa_nodebug(&ucode_new_rev); + patch = (u8 (*)[PATCH_MAX_SIZE])__pa_nodebug(&amd_ucode_patch); +#else + new_rev = &ucode_new_rev; + patch = &amd_ucode_patch[0]; +#endif + + desc.cpuid_1_eax = cpuid_1_eax; + + scan_containers(ucode, size, &desc); + + mc = desc.mc; + if (!mc) + return ret; + + native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); + + /* + * Allow application of the same revision to pick up SMT-specific + * changes even if the revision of the other SMT thread is already + * up-to-date. + */ + if (rev > mc->hdr.patch_id) + return ret; + + if (!__apply_microcode_amd(mc)) { + *new_rev = mc->hdr.patch_id; + ret = true; + + if (save_patch) + memcpy(patch, mc, min_t(u32, desc.psize, PATCH_MAX_SIZE)); + } + + return ret; +} + +static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family) +{ + char fw_name[36] = "amd-ucode/microcode_amd.bin"; + struct firmware fw; + + if (IS_ENABLED(CONFIG_X86_32)) + return false; + + if (family >= 0x15) + snprintf(fw_name, sizeof(fw_name), + "amd-ucode/microcode_amd_fam%.2xh.bin", family); + + if (firmware_request_builtin(&fw, fw_name)) { + cp->size = fw.size; + cp->data = (void *)fw.data; + return true; + } + + return false; +} + +static void __load_ucode_amd(unsigned int cpuid_1_eax, struct cpio_data *ret) +{ + struct ucode_cpu_info *uci; + struct cpio_data cp; + const char *path; + bool use_pa; + + if (IS_ENABLED(CONFIG_X86_32)) { + uci = (struct ucode_cpu_info *)__pa_nodebug(ucode_cpu_info); + path = (const char *)__pa_nodebug(ucode_path); + use_pa = true; + } else { + uci = ucode_cpu_info; + path = ucode_path; + use_pa = false; + } + + if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) + cp = find_microcode_in_initrd(path, use_pa); + + /* Needed in load_microcode_amd() */ + uci->cpu_sig.sig = cpuid_1_eax; + + *ret = cp; +} + +void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax) +{ + struct cpio_data cp = { }; + + __load_ucode_amd(cpuid_1_eax, &cp); + if (!(cp.data && cp.size)) + return; + + apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true); +} + +void load_ucode_amd_ap(unsigned int cpuid_1_eax) +{ + struct microcode_amd *mc; + struct cpio_data cp; + u32 *new_rev, rev, dummy; + + if (IS_ENABLED(CONFIG_X86_32)) { + mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch); + new_rev = (u32 *)__pa_nodebug(&ucode_new_rev); + } else { + mc = (struct microcode_amd *)amd_ucode_patch; + new_rev = &ucode_new_rev; + } + + native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); + + /* + * Check whether a new patch has been saved already. Also, allow application of + * the same revision in order to pick up SMT-thread-specific configuration even + * if the sibling SMT thread already has an up-to-date revision. + */ + if (*new_rev && rev <= mc->hdr.patch_id) { + if (!__apply_microcode_amd(mc)) { + *new_rev = mc->hdr.patch_id; + return; + } + } + + __load_ucode_amd(cpuid_1_eax, &cp); + if (!(cp.data && cp.size)) + return; + + apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false); +} + +static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size); + +int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax) +{ + struct cont_desc desc = { 0 }; + enum ucode_state ret; + struct cpio_data cp; + + cp = find_microcode_in_initrd(ucode_path, false); + if (!(cp.data && cp.size)) + return -EINVAL; + + desc.cpuid_1_eax = cpuid_1_eax; + + scan_containers(cp.data, cp.size, &desc); + if (!desc.mc) + return -EINVAL; + + ret = load_microcode_amd(x86_family(cpuid_1_eax), desc.data, desc.size); + if (ret > UCODE_UPDATED) + return -EINVAL; + + return 0; +} + +void reload_ucode_amd(unsigned int cpu) +{ + u32 rev, dummy __always_unused; + struct microcode_amd *mc; + + mc = (struct microcode_amd *)amd_ucode_patch[cpu_to_node(cpu)]; + + rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); + + if (rev < mc->hdr.patch_id) { + if (!__apply_microcode_amd(mc)) { + ucode_new_rev = mc->hdr.patch_id; + pr_info("reload patch_level=0x%08x\n", ucode_new_rev); + } + } +} +static u16 __find_equiv_id(unsigned int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + return find_equiv_id(&equiv_table, uci->cpu_sig.sig); +} + +/* + * a small, trivial cache of per-family ucode patches + */ +static struct ucode_patch *cache_find_patch(u16 equiv_cpu) +{ + struct ucode_patch *p; + + list_for_each_entry(p, µcode_cache, plist) + if (p->equiv_cpu == equiv_cpu) + return p; + return NULL; +} + +static void update_cache(struct ucode_patch *new_patch) +{ + struct ucode_patch *p; + + list_for_each_entry(p, µcode_cache, plist) { + if (p->equiv_cpu == new_patch->equiv_cpu) { + if (p->patch_id >= new_patch->patch_id) { + /* we already have the latest patch */ + kfree(new_patch->data); + kfree(new_patch); + return; + } + + list_replace(&p->plist, &new_patch->plist); + kfree(p->data); + kfree(p); + return; + } + } + /* no patch found, add it */ + list_add_tail(&new_patch->plist, µcode_cache); +} + +static void free_cache(void) +{ + struct ucode_patch *p, *tmp; + + list_for_each_entry_safe(p, tmp, µcode_cache, plist) { + __list_del(p->plist.prev, p->plist.next); + kfree(p->data); + kfree(p); + } +} + +static struct ucode_patch *find_patch(unsigned int cpu) +{ + u16 equiv_id; + + equiv_id = __find_equiv_id(cpu); + if (!equiv_id) + return NULL; + + return cache_find_patch(equiv_id); +} + +static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct ucode_patch *p; + + csig->sig = cpuid_eax(0x00000001); + csig->rev = c->microcode; + + /* + * a patch could have been loaded early, set uci->mc so that + * mc_bp_resume() can call apply_microcode() + */ + p = find_patch(cpu); + if (p && (p->patch_id == csig->rev)) + uci->mc = p->data; + + pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); + + return 0; +} + +static enum ucode_state apply_microcode_amd(int cpu) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + struct microcode_amd *mc_amd; + struct ucode_cpu_info *uci; + struct ucode_patch *p; + enum ucode_state ret; + u32 rev, dummy __always_unused; + + BUG_ON(raw_smp_processor_id() != cpu); + + uci = ucode_cpu_info + cpu; + + p = find_patch(cpu); + if (!p) + return UCODE_NFOUND; + + mc_amd = p->data; + uci->mc = p->data; + + rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); + + /* need to apply patch? */ + if (rev > mc_amd->hdr.patch_id) { + ret = UCODE_OK; + goto out; + } + + if (__apply_microcode_amd(mc_amd)) { + pr_err("CPU%d: update failed for patch_level=0x%08x\n", + cpu, mc_amd->hdr.patch_id); + return UCODE_ERROR; + } + + rev = mc_amd->hdr.patch_id; + ret = UCODE_UPDATED; + + pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev); + +out: + uci->cpu_sig.rev = rev; + c->microcode = rev; + + /* Update boot_cpu_data's revision too, if we're on the BSP: */ + if (c->cpu_index == boot_cpu_data.cpu_index) + boot_cpu_data.microcode = rev; + + return ret; +} + +static size_t install_equiv_cpu_table(const u8 *buf, size_t buf_size) +{ + u32 equiv_tbl_len; + const u32 *hdr; + + if (!verify_equivalence_table(buf, buf_size, false)) + return 0; + + hdr = (const u32 *)buf; + equiv_tbl_len = hdr[2]; + + equiv_table.entry = vmalloc(equiv_tbl_len); + if (!equiv_table.entry) { + pr_err("failed to allocate equivalent CPU table\n"); + return 0; + } + + memcpy(equiv_table.entry, buf + CONTAINER_HDR_SZ, equiv_tbl_len); + equiv_table.num_entries = equiv_tbl_len / sizeof(struct equiv_cpu_entry); + + /* add header length */ + return equiv_tbl_len + CONTAINER_HDR_SZ; +} + +static void free_equiv_cpu_table(void) +{ + vfree(equiv_table.entry); + memset(&equiv_table, 0, sizeof(equiv_table)); +} + +static void cleanup(void) +{ + free_equiv_cpu_table(); + free_cache(); +} + +/* + * Return a non-negative value even if some of the checks failed so that + * we can skip over the next patch. If we return a negative value, we + * signal a grave error like a memory allocation has failed and the + * driver cannot continue functioning normally. In such cases, we tear + * down everything we've used up so far and exit. + */ +static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover, + unsigned int *patch_size) +{ + struct microcode_header_amd *mc_hdr; + struct ucode_patch *patch; + u16 proc_id; + int ret; + + ret = verify_patch(family, fw, leftover, patch_size, false); + if (ret) + return ret; + + patch = kzalloc(sizeof(*patch), GFP_KERNEL); + if (!patch) { + pr_err("Patch allocation failure.\n"); + return -EINVAL; + } + + patch->data = kmemdup(fw + SECTION_HDR_SIZE, *patch_size, GFP_KERNEL); + if (!patch->data) { + pr_err("Patch data allocation failure.\n"); + kfree(patch); + return -EINVAL; + } + patch->size = *patch_size; + + mc_hdr = (struct microcode_header_amd *)(fw + SECTION_HDR_SIZE); + proc_id = mc_hdr->processor_rev_id; + + INIT_LIST_HEAD(&patch->plist); + patch->patch_id = mc_hdr->patch_id; + patch->equiv_cpu = proc_id; + + pr_debug("%s: Added patch_id: 0x%08x, proc_id: 0x%04x\n", + __func__, patch->patch_id, proc_id); + + /* ... and add to cache. */ + update_cache(patch); + + return 0; +} + +static enum ucode_state __load_microcode_amd(u8 family, const u8 *data, + size_t size) +{ + u8 *fw = (u8 *)data; + size_t offset; + + offset = install_equiv_cpu_table(data, size); + if (!offset) + return UCODE_ERROR; + + fw += offset; + size -= offset; + + if (*(u32 *)fw != UCODE_UCODE_TYPE) { + pr_err("invalid type field in container file section header\n"); + free_equiv_cpu_table(); + return UCODE_ERROR; + } + + while (size > 0) { + unsigned int crnt_size = 0; + int ret; + + ret = verify_and_add_patch(family, fw, size, &crnt_size); + if (ret < 0) + return UCODE_ERROR; + + fw += crnt_size + SECTION_HDR_SIZE; + size -= (crnt_size + SECTION_HDR_SIZE); + } + + return UCODE_OK; +} + +static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size) +{ + struct cpuinfo_x86 *c; + unsigned int nid, cpu; + struct ucode_patch *p; + enum ucode_state ret; + + /* free old equiv table */ + free_equiv_cpu_table(); + + ret = __load_microcode_amd(family, data, size); + if (ret != UCODE_OK) { + cleanup(); + return ret; + } + + for_each_node(nid) { + cpu = cpumask_first(cpumask_of_node(nid)); + c = &cpu_data(cpu); + + p = find_patch(cpu); + if (!p) + continue; + + if (c->microcode >= p->patch_id) + continue; + + ret = UCODE_NEW; + + memset(&amd_ucode_patch[nid], 0, PATCH_MAX_SIZE); + memcpy(&amd_ucode_patch[nid], p->data, min_t(u32, p->size, PATCH_MAX_SIZE)); + } + + return ret; +} + +/* + * AMD microcode firmware naming convention, up to family 15h they are in + * the legacy file: + * + * amd-ucode/microcode_amd.bin + * + * This legacy file is always smaller than 2K in size. + * + * Beginning with family 15h, they are in family-specific firmware files: + * + * amd-ucode/microcode_amd_fam15h.bin + * amd-ucode/microcode_amd_fam16h.bin + * ... + * + * These might be larger than 2K. + */ +static enum ucode_state request_microcode_amd(int cpu, struct device *device, + bool refresh_fw) +{ + char fw_name[36] = "amd-ucode/microcode_amd.bin"; + struct cpuinfo_x86 *c = &cpu_data(cpu); + enum ucode_state ret = UCODE_NFOUND; + const struct firmware *fw; + + /* reload ucode container only on the boot cpu */ + if (!refresh_fw) + return UCODE_OK; + + if (c->x86 >= 0x15) + snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86); + + if (request_firmware_direct(&fw, (const char *)fw_name, device)) { + pr_debug("failed to load file %s\n", fw_name); + goto out; + } + + ret = UCODE_ERROR; + if (!verify_container(fw->data, fw->size, false)) + goto fw_release; + + ret = load_microcode_amd(c->x86, fw->data, fw->size); + + fw_release: + release_firmware(fw); + + out: + return ret; +} + +static void microcode_fini_cpu_amd(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + uci->mc = NULL; +} + +static struct microcode_ops microcode_amd_ops = { + .request_microcode_fw = request_microcode_amd, + .collect_cpu_info = collect_cpu_info_amd, + .apply_microcode = apply_microcode_amd, + .microcode_fini_cpu = microcode_fini_cpu_amd, +}; + +struct microcode_ops * __init init_amd_microcode(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warn("AMD CPU family 0x%x not supported\n", c->x86); + return NULL; + } + + if (ucode_new_rev) + pr_info_once("microcode updated early to new patch_level=0x%08x\n", + ucode_new_rev); + + return µcode_amd_ops; +} + +void __exit exit_amd_microcode(void) +{ + cleanup(); +} diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c new file mode 100644 index 000000000..9e02648e5 --- /dev/null +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -0,0 +1,810 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <aivazian.tigran@gmail.com> + * 2006 Shaohua Li <shaohua.li@intel.com> + * 2013-2016 Borislav Petkov <bp@alien8.de> + * + * X86 CPU microcode early update for Linux: + * + * Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com> + * H Peter Anvin" <hpa@zytor.com> + * (C) 2015 Borislav Petkov <bp@alien8.de> + * + * This driver allows to upgrade microcode on x86 processors. + */ + +#define pr_fmt(fmt) "microcode: " fmt + +#include <linux/platform_device.h> +#include <linux/stop_machine.h> +#include <linux/syscore_ops.h> +#include <linux/miscdevice.h> +#include <linux/capability.h> +#include <linux/firmware.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/nmi.h> +#include <linux/fs.h> +#include <linux/mm.h> + +#include <asm/microcode_intel.h> +#include <asm/cpu_device_id.h> +#include <asm/microcode_amd.h> +#include <asm/perf_event.h> +#include <asm/microcode.h> +#include <asm/processor.h> +#include <asm/cmdline.h> +#include <asm/setup.h> + +#define DRIVER_VERSION "2.2" + +static struct microcode_ops *microcode_ops; +static bool dis_ucode_ldr = true; + +bool initrd_gone; + +LIST_HEAD(microcode_cache); + +/* + * Synchronization. + * + * All non cpu-hotplug-callback call sites use: + * + * - microcode_mutex to synchronize with each other; + * - cpus_read_lock/unlock() to synchronize with + * the cpu-hotplug-callback call sites. + * + * We guarantee that only a single cpu is being + * updated at any particular moment of time. + */ +static DEFINE_MUTEX(microcode_mutex); + +struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; + +struct cpu_info_ctx { + struct cpu_signature *cpu_sig; + int err; +}; + +/* + * Those patch levels cannot be updated to newer ones and thus should be final. + */ +static u32 final_levels[] = { + 0x01000098, + 0x0100009f, + 0x010000af, + 0, /* T-101 terminator */ +}; + +/* + * Check the current patch level on this CPU. + * + * Returns: + * - true: if update should stop + * - false: otherwise + */ +static bool amd_check_current_patch_level(void) +{ + u32 lvl, dummy, i; + u32 *levels; + + native_rdmsr(MSR_AMD64_PATCH_LEVEL, lvl, dummy); + + if (IS_ENABLED(CONFIG_X86_32)) + levels = (u32 *)__pa_nodebug(&final_levels); + else + levels = final_levels; + + for (i = 0; levels[i]; i++) { + if (lvl == levels[i]) + return true; + } + return false; +} + +static bool __init check_loader_disabled_bsp(void) +{ + static const char *__dis_opt_str = "dis_ucode_ldr"; + +#ifdef CONFIG_X86_32 + const char *cmdline = (const char *)__pa_nodebug(boot_command_line); + const char *option = (const char *)__pa_nodebug(__dis_opt_str); + bool *res = (bool *)__pa_nodebug(&dis_ucode_ldr); + +#else /* CONFIG_X86_64 */ + const char *cmdline = boot_command_line; + const char *option = __dis_opt_str; + bool *res = &dis_ucode_ldr; +#endif + + /* + * CPUID(1).ECX[31]: reserved for hypervisor use. This is still not + * completely accurate as xen pv guests don't see that CPUID bit set but + * that's good enough as they don't land on the BSP path anyway. + */ + if (native_cpuid_ecx(1) & BIT(31)) + return *res; + + if (x86_cpuid_vendor() == X86_VENDOR_AMD) { + if (amd_check_current_patch_level()) + return *res; + } + + if (cmdline_find_option_bool(cmdline, option) <= 0) + *res = false; + + return *res; +} + +void __init load_ucode_bsp(void) +{ + unsigned int cpuid_1_eax; + bool intel = true; + + if (!have_cpuid_p()) + return; + + cpuid_1_eax = native_cpuid_eax(1); + + switch (x86_cpuid_vendor()) { + case X86_VENDOR_INTEL: + if (x86_family(cpuid_1_eax) < 6) + return; + break; + + case X86_VENDOR_AMD: + if (x86_family(cpuid_1_eax) < 0x10) + return; + intel = false; + break; + + default: + return; + } + + if (check_loader_disabled_bsp()) + return; + + if (intel) + load_ucode_intel_bsp(); + else + load_ucode_amd_bsp(cpuid_1_eax); +} + +static bool check_loader_disabled_ap(void) +{ +#ifdef CONFIG_X86_32 + return *((bool *)__pa_nodebug(&dis_ucode_ldr)); +#else + return dis_ucode_ldr; +#endif +} + +void load_ucode_ap(void) +{ + unsigned int cpuid_1_eax; + + if (check_loader_disabled_ap()) + return; + + cpuid_1_eax = native_cpuid_eax(1); + + switch (x86_cpuid_vendor()) { + case X86_VENDOR_INTEL: + if (x86_family(cpuid_1_eax) >= 6) + load_ucode_intel_ap(); + break; + case X86_VENDOR_AMD: + if (x86_family(cpuid_1_eax) >= 0x10) + load_ucode_amd_ap(cpuid_1_eax); + break; + default: + break; + } +} + +static int __init save_microcode_in_initrd(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + int ret = -EINVAL; + + switch (c->x86_vendor) { + case X86_VENDOR_INTEL: + if (c->x86 >= 6) + ret = save_microcode_in_initrd_intel(); + break; + case X86_VENDOR_AMD: + if (c->x86 >= 0x10) + ret = save_microcode_in_initrd_amd(cpuid_eax(1)); + break; + default: + break; + } + + initrd_gone = true; + + return ret; +} + +struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa) +{ +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long start = 0; + size_t size; + +#ifdef CONFIG_X86_32 + struct boot_params *params; + + if (use_pa) + params = (struct boot_params *)__pa_nodebug(&boot_params); + else + params = &boot_params; + + size = params->hdr.ramdisk_size; + + /* + * Set start only if we have an initrd image. We cannot use initrd_start + * because it is not set that early yet. + */ + if (size) + start = params->hdr.ramdisk_image; + +# else /* CONFIG_X86_64 */ + size = (unsigned long)boot_params.ext_ramdisk_size << 32; + size |= boot_params.hdr.ramdisk_size; + + if (size) { + start = (unsigned long)boot_params.ext_ramdisk_image << 32; + start |= boot_params.hdr.ramdisk_image; + + start += PAGE_OFFSET; + } +# endif + + /* + * Fixup the start address: after reserve_initrd() runs, initrd_start + * has the virtual address of the beginning of the initrd. It also + * possibly relocates the ramdisk. In either case, initrd_start contains + * the updated address so use that instead. + * + * initrd_gone is for the hotplug case where we've thrown out initrd + * already. + */ + if (!use_pa) { + if (initrd_gone) + return (struct cpio_data){ NULL, 0, "" }; + if (initrd_start) + start = initrd_start; + } else { + /* + * The picture with physical addresses is a bit different: we + * need to get the *physical* address to which the ramdisk was + * relocated, i.e., relocated_ramdisk (not initrd_start) and + * since we're running from physical addresses, we need to access + * relocated_ramdisk through its *physical* address too. + */ + u64 *rr = (u64 *)__pa_nodebug(&relocated_ramdisk); + if (*rr) + start = *rr; + } + + return find_cpio_data(path, (void *)start, size, NULL); +#else /* !CONFIG_BLK_DEV_INITRD */ + return (struct cpio_data){ NULL, 0, "" }; +#endif +} + +void reload_early_microcode(unsigned int cpu) +{ + int vendor, family; + + vendor = x86_cpuid_vendor(); + family = x86_cpuid_family(); + + switch (vendor) { + case X86_VENDOR_INTEL: + if (family >= 6) + reload_ucode_intel(); + break; + case X86_VENDOR_AMD: + if (family >= 0x10) + reload_ucode_amd(cpu); + break; + default: + break; + } +} + +static void collect_cpu_info_local(void *arg) +{ + struct cpu_info_ctx *ctx = arg; + + ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(), + ctx->cpu_sig); +} + +static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig) +{ + struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 }; + int ret; + + ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1); + if (!ret) + ret = ctx.err; + + return ret; +} + +static int collect_cpu_info(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + int ret; + + memset(uci, 0, sizeof(*uci)); + + ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig); + if (!ret) + uci->valid = 1; + + return ret; +} + +static void apply_microcode_local(void *arg) +{ + enum ucode_state *err = arg; + + *err = microcode_ops->apply_microcode(smp_processor_id()); +} + +static int apply_microcode_on_target(int cpu) +{ + enum ucode_state err; + int ret; + + ret = smp_call_function_single(cpu, apply_microcode_local, &err, 1); + if (!ret) { + if (err == UCODE_ERROR) + ret = 1; + } + return ret; +} + +/* fake device for request_firmware */ +static struct platform_device *microcode_pdev; + +#ifdef CONFIG_MICROCODE_LATE_LOADING +/* + * Late loading dance. Why the heavy-handed stomp_machine effort? + * + * - HT siblings must be idle and not execute other code while the other sibling + * is loading microcode in order to avoid any negative interactions caused by + * the loading. + * + * - In addition, microcode update on the cores must be serialized until this + * requirement can be relaxed in the future. Right now, this is conservative + * and good. + */ +#define SPINUNIT 100 /* 100 nsec */ + +static int check_online_cpus(void) +{ + unsigned int cpu; + + /* + * Make sure all CPUs are online. It's fine for SMT to be disabled if + * all the primary threads are still online. + */ + for_each_present_cpu(cpu) { + if (topology_is_primary_thread(cpu) && !cpu_online(cpu)) { + pr_err("Not all CPUs online, aborting microcode update.\n"); + return -EINVAL; + } + } + + return 0; +} + +static atomic_t late_cpus_in; +static atomic_t late_cpus_out; + +static int __wait_for_cpus(atomic_t *t, long long timeout) +{ + int all_cpus = num_online_cpus(); + + atomic_inc(t); + + while (atomic_read(t) < all_cpus) { + if (timeout < SPINUNIT) { + pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n", + all_cpus - atomic_read(t)); + return 1; + } + + ndelay(SPINUNIT); + timeout -= SPINUNIT; + + touch_nmi_watchdog(); + } + return 0; +} + +/* + * Returns: + * < 0 - on error + * 0 - success (no update done or microcode was updated) + */ +static int __reload_late(void *info) +{ + int cpu = smp_processor_id(); + enum ucode_state err; + int ret = 0; + + /* + * Wait for all CPUs to arrive. A load will not be attempted unless all + * CPUs show up. + * */ + if (__wait_for_cpus(&late_cpus_in, NSEC_PER_SEC)) + return -1; + + /* + * On an SMT system, it suffices to load the microcode on one sibling of + * the core because the microcode engine is shared between the threads. + * Synchronization still needs to take place so that no concurrent + * loading attempts happen on multiple threads of an SMT core. See + * below. + */ + if (cpumask_first(topology_sibling_cpumask(cpu)) == cpu) + apply_microcode_local(&err); + else + goto wait_for_siblings; + + if (err >= UCODE_NFOUND) { + if (err == UCODE_ERROR) + pr_warn("Error reloading microcode on CPU %d\n", cpu); + + ret = -1; + } + +wait_for_siblings: + if (__wait_for_cpus(&late_cpus_out, NSEC_PER_SEC)) + panic("Timeout during microcode update!\n"); + + /* + * At least one thread has completed update on each core. + * For others, simply call the update to make sure the + * per-cpu cpuinfo can be updated with right microcode + * revision. + */ + if (cpumask_first(topology_sibling_cpumask(cpu)) != cpu) + apply_microcode_local(&err); + + return ret; +} + +/* + * Reload microcode late on all CPUs. Wait for a sec until they + * all gather together. + */ +static int microcode_reload_late(void) +{ + int old = boot_cpu_data.microcode, ret; + struct cpuinfo_x86 prev_info; + + pr_err("Attempting late microcode loading - it is dangerous and taints the kernel.\n"); + pr_err("You should switch to early loading, if possible.\n"); + + atomic_set(&late_cpus_in, 0); + atomic_set(&late_cpus_out, 0); + + /* + * Take a snapshot before the microcode update in order to compare and + * check whether any bits changed after an update. + */ + store_cpu_caps(&prev_info); + + ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask); + if (!ret) { + pr_info("Reload succeeded, microcode revision: 0x%x -> 0x%x\n", + old, boot_cpu_data.microcode); + microcode_check(&prev_info); + } else { + pr_info("Reload failed, current microcode revision: 0x%x\n", + boot_cpu_data.microcode); + } + + return ret; +} + +static ssize_t reload_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + enum ucode_state tmp_ret = UCODE_OK; + int bsp = boot_cpu_data.cpu_index; + unsigned long val; + ssize_t ret = 0; + + ret = kstrtoul(buf, 0, &val); + if (ret) + return ret; + + if (val != 1) + return size; + + cpus_read_lock(); + + ret = check_online_cpus(); + if (ret) + goto put; + + tmp_ret = microcode_ops->request_microcode_fw(bsp, µcode_pdev->dev, true); + if (tmp_ret != UCODE_NEW) + goto put; + + mutex_lock(µcode_mutex); + ret = microcode_reload_late(); + mutex_unlock(µcode_mutex); + +put: + cpus_read_unlock(); + + if (ret == 0) + ret = size; + + add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK); + + return ret; +} + +static DEVICE_ATTR_WO(reload); +#endif + +static ssize_t version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.rev); +} + +static ssize_t pf_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.pf); +} + +static DEVICE_ATTR(version, 0444, version_show, NULL); +static DEVICE_ATTR(processor_flags, 0444, pf_show, NULL); + +static struct attribute *mc_default_attrs[] = { + &dev_attr_version.attr, + &dev_attr_processor_flags.attr, + NULL +}; + +static const struct attribute_group mc_attr_group = { + .attrs = mc_default_attrs, + .name = "microcode", +}; + +static void microcode_fini_cpu(int cpu) +{ + if (microcode_ops->microcode_fini_cpu) + microcode_ops->microcode_fini_cpu(cpu); +} + +static enum ucode_state microcode_resume_cpu(int cpu) +{ + if (apply_microcode_on_target(cpu)) + return UCODE_ERROR; + + pr_debug("CPU%d updated upon resume\n", cpu); + + return UCODE_OK; +} + +static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw) +{ + enum ucode_state ustate; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (uci->valid) + return UCODE_OK; + + if (collect_cpu_info(cpu)) + return UCODE_ERROR; + + /* --dimm. Trigger a delayed update? */ + if (system_state != SYSTEM_RUNNING) + return UCODE_NFOUND; + + ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev, refresh_fw); + if (ustate == UCODE_NEW) { + pr_debug("CPU%d updated upon init\n", cpu); + apply_microcode_on_target(cpu); + } + + return ustate; +} + +static enum ucode_state microcode_update_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + /* Refresh CPU microcode revision after resume. */ + collect_cpu_info(cpu); + + if (uci->valid) + return microcode_resume_cpu(cpu); + + return microcode_init_cpu(cpu, false); +} + +static int mc_device_add(struct device *dev, struct subsys_interface *sif) +{ + int err, cpu = dev->id; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("CPU%d added\n", cpu); + + err = sysfs_create_group(&dev->kobj, &mc_attr_group); + if (err) + return err; + + if (microcode_init_cpu(cpu, true) == UCODE_ERROR) + return -EINVAL; + + return err; +} + +static void mc_device_remove(struct device *dev, struct subsys_interface *sif) +{ + int cpu = dev->id; + + if (!cpu_online(cpu)) + return; + + pr_debug("CPU%d removed\n", cpu); + microcode_fini_cpu(cpu); + sysfs_remove_group(&dev->kobj, &mc_attr_group); +} + +static struct subsys_interface mc_cpu_interface = { + .name = "microcode", + .subsys = &cpu_subsys, + .add_dev = mc_device_add, + .remove_dev = mc_device_remove, +}; + +/** + * microcode_bsp_resume - Update boot CPU microcode during resume. + */ +void microcode_bsp_resume(void) +{ + int cpu = smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (uci->valid && uci->mc) + microcode_ops->apply_microcode(cpu); + else if (!uci->mc) + reload_early_microcode(cpu); +} + +static struct syscore_ops mc_syscore_ops = { + .resume = microcode_bsp_resume, +}; + +static int mc_cpu_starting(unsigned int cpu) +{ + microcode_update_cpu(cpu); + pr_debug("CPU%d added\n", cpu); + return 0; +} + +static int mc_cpu_online(unsigned int cpu) +{ + struct device *dev = get_cpu_device(cpu); + + if (sysfs_create_group(&dev->kobj, &mc_attr_group)) + pr_err("Failed to create group for CPU%d\n", cpu); + return 0; +} + +static int mc_cpu_down_prep(unsigned int cpu) +{ + struct device *dev; + + dev = get_cpu_device(cpu); + /* Suspend is in progress, only remove the interface */ + sysfs_remove_group(&dev->kobj, &mc_attr_group); + pr_debug("CPU%d removed\n", cpu); + + return 0; +} + +static struct attribute *cpu_root_microcode_attrs[] = { +#ifdef CONFIG_MICROCODE_LATE_LOADING + &dev_attr_reload.attr, +#endif + NULL +}; + +static const struct attribute_group cpu_root_microcode_group = { + .name = "microcode", + .attrs = cpu_root_microcode_attrs, +}; + +static int __init microcode_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + int error; + + if (dis_ucode_ldr) + return -EINVAL; + + if (c->x86_vendor == X86_VENDOR_INTEL) + microcode_ops = init_intel_microcode(); + else if (c->x86_vendor == X86_VENDOR_AMD) + microcode_ops = init_amd_microcode(); + else + pr_err("no support for this CPU vendor\n"); + + if (!microcode_ops) + return -ENODEV; + + microcode_pdev = platform_device_register_simple("microcode", -1, + NULL, 0); + if (IS_ERR(microcode_pdev)) + return PTR_ERR(microcode_pdev); + + cpus_read_lock(); + mutex_lock(µcode_mutex); + error = subsys_interface_register(&mc_cpu_interface); + mutex_unlock(µcode_mutex); + cpus_read_unlock(); + + if (error) + goto out_pdev; + + error = sysfs_create_group(&cpu_subsys.dev_root->kobj, + &cpu_root_microcode_group); + + if (error) { + pr_err("Error creating microcode group!\n"); + goto out_driver; + } + + register_syscore_ops(&mc_syscore_ops); + cpuhp_setup_state_nocalls(CPUHP_AP_MICROCODE_LOADER, "x86/microcode:starting", + mc_cpu_starting, NULL); + cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/microcode:online", + mc_cpu_online, mc_cpu_down_prep); + + pr_info("Microcode Update Driver: v%s.", DRIVER_VERSION); + + return 0; + + out_driver: + cpus_read_lock(); + mutex_lock(µcode_mutex); + + subsys_interface_unregister(&mc_cpu_interface); + + mutex_unlock(µcode_mutex); + cpus_read_unlock(); + + out_pdev: + platform_device_unregister(microcode_pdev); + return error; + +} +fs_initcall(save_microcode_in_initrd); +late_initcall(microcode_init); diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c new file mode 100644 index 000000000..1def66118 --- /dev/null +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -0,0 +1,941 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <aivazian.tigran@gmail.com> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * Intel CPU microcode early update for Linux + * + * Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com> + * H Peter Anvin" <hpa@zytor.com> + */ + +/* + * This needs to be before all headers so that pr_debug in printk.h doesn't turn + * printk calls into no_printk(). + * + *#define DEBUG + */ +#define pr_fmt(fmt) "microcode: " fmt + +#include <linux/earlycpio.h> +#include <linux/firmware.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/initrd.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/cpu.h> +#include <linux/uio.h> +#include <linux/mm.h> + +#include <asm/microcode_intel.h> +#include <asm/intel-family.h> +#include <asm/processor.h> +#include <asm/tlbflush.h> +#include <asm/setup.h> +#include <asm/msr.h> + +static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin"; + +/* Current microcode patch used in early patching on the APs. */ +static struct microcode_intel *intel_ucode_patch; + +/* last level cache size per core */ +static int llc_size_per_core; + +/* + * Returns 1 if update has been found, 0 otherwise. + */ +static int find_matching_signature(void *mc, unsigned int csig, int cpf) +{ + struct microcode_header_intel *mc_hdr = mc; + struct extended_sigtable *ext_hdr; + struct extended_signature *ext_sig; + int i; + + if (intel_cpu_signatures_match(csig, cpf, mc_hdr->sig, mc_hdr->pf)) + return 1; + + /* Look for ext. headers: */ + if (get_totalsize(mc_hdr) <= get_datasize(mc_hdr) + MC_HEADER_SIZE) + return 0; + + ext_hdr = mc + get_datasize(mc_hdr) + MC_HEADER_SIZE; + ext_sig = (void *)ext_hdr + EXT_HEADER_SIZE; + + for (i = 0; i < ext_hdr->count; i++) { + if (intel_cpu_signatures_match(csig, cpf, ext_sig->sig, ext_sig->pf)) + return 1; + ext_sig++; + } + return 0; +} + +/* + * Returns 1 if update has been found, 0 otherwise. + */ +static int has_newer_microcode(void *mc, unsigned int csig, int cpf, int new_rev) +{ + struct microcode_header_intel *mc_hdr = mc; + + if (mc_hdr->rev <= new_rev) + return 0; + + return find_matching_signature(mc, csig, cpf); +} + +static struct ucode_patch *memdup_patch(void *data, unsigned int size) +{ + struct ucode_patch *p; + + p = kzalloc(sizeof(struct ucode_patch), GFP_KERNEL); + if (!p) + return NULL; + + p->data = kmemdup(data, size, GFP_KERNEL); + if (!p->data) { + kfree(p); + return NULL; + } + + return p; +} + +static void save_microcode_patch(struct ucode_cpu_info *uci, void *data, unsigned int size) +{ + struct microcode_header_intel *mc_hdr, *mc_saved_hdr; + struct ucode_patch *iter, *tmp, *p = NULL; + bool prev_found = false; + unsigned int sig, pf; + + mc_hdr = (struct microcode_header_intel *)data; + + list_for_each_entry_safe(iter, tmp, µcode_cache, plist) { + mc_saved_hdr = (struct microcode_header_intel *)iter->data; + sig = mc_saved_hdr->sig; + pf = mc_saved_hdr->pf; + + if (find_matching_signature(data, sig, pf)) { + prev_found = true; + + if (mc_hdr->rev <= mc_saved_hdr->rev) + continue; + + p = memdup_patch(data, size); + if (!p) + pr_err("Error allocating buffer %p\n", data); + else { + list_replace(&iter->plist, &p->plist); + kfree(iter->data); + kfree(iter); + } + } + } + + /* + * There weren't any previous patches found in the list cache; save the + * newly found. + */ + if (!prev_found) { + p = memdup_patch(data, size); + if (!p) + pr_err("Error allocating buffer for %p\n", data); + else + list_add_tail(&p->plist, µcode_cache); + } + + if (!p) + return; + + if (!find_matching_signature(p->data, uci->cpu_sig.sig, uci->cpu_sig.pf)) + return; + + /* + * Save for early loading. On 32-bit, that needs to be a physical + * address as the APs are running from physical addresses, before + * paging has been enabled. + */ + if (IS_ENABLED(CONFIG_X86_32)) + intel_ucode_patch = (struct microcode_intel *)__pa_nodebug(p->data); + else + intel_ucode_patch = p->data; +} + +static int microcode_sanity_check(void *mc, int print_err) +{ + unsigned long total_size, data_size, ext_table_size; + struct microcode_header_intel *mc_header = mc; + struct extended_sigtable *ext_header = NULL; + u32 sum, orig_sum, ext_sigcount = 0, i; + struct extended_signature *ext_sig; + + total_size = get_totalsize(mc_header); + data_size = get_datasize(mc_header); + + if (data_size + MC_HEADER_SIZE > total_size) { + if (print_err) + pr_err("Error: bad microcode data file size.\n"); + return -EINVAL; + } + + if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { + if (print_err) + pr_err("Error: invalid/unknown microcode update format.\n"); + return -EINVAL; + } + + ext_table_size = total_size - (MC_HEADER_SIZE + data_size); + if (ext_table_size) { + u32 ext_table_sum = 0; + u32 *ext_tablep; + + if ((ext_table_size < EXT_HEADER_SIZE) + || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { + if (print_err) + pr_err("Error: truncated extended signature table.\n"); + return -EINVAL; + } + + ext_header = mc + MC_HEADER_SIZE + data_size; + if (ext_table_size != exttable_size(ext_header)) { + if (print_err) + pr_err("Error: extended signature table size mismatch.\n"); + return -EFAULT; + } + + ext_sigcount = ext_header->count; + + /* + * Check extended table checksum: the sum of all dwords that + * comprise a valid table must be 0. + */ + ext_tablep = (u32 *)ext_header; + + i = ext_table_size / sizeof(u32); + while (i--) + ext_table_sum += ext_tablep[i]; + + if (ext_table_sum) { + if (print_err) + pr_warn("Bad extended signature table checksum, aborting.\n"); + return -EINVAL; + } + } + + /* + * Calculate the checksum of update data and header. The checksum of + * valid update data and header including the extended signature table + * must be 0. + */ + orig_sum = 0; + i = (MC_HEADER_SIZE + data_size) / sizeof(u32); + while (i--) + orig_sum += ((u32 *)mc)[i]; + + if (orig_sum) { + if (print_err) + pr_err("Bad microcode data checksum, aborting.\n"); + return -EINVAL; + } + + if (!ext_table_size) + return 0; + + /* + * Check extended signature checksum: 0 => valid. + */ + for (i = 0; i < ext_sigcount; i++) { + ext_sig = (void *)ext_header + EXT_HEADER_SIZE + + EXT_SIGNATURE_SIZE * i; + + sum = (mc_header->sig + mc_header->pf + mc_header->cksum) - + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); + if (sum) { + if (print_err) + pr_err("Bad extended signature checksum, aborting.\n"); + return -EINVAL; + } + } + return 0; +} + +/* + * Get microcode matching with BSP's model. Only CPUs with the same model as + * BSP can stay in the platform. + */ +static struct microcode_intel * +scan_microcode(void *data, size_t size, struct ucode_cpu_info *uci, bool save) +{ + struct microcode_header_intel *mc_header; + struct microcode_intel *patch = NULL; + unsigned int mc_size; + + while (size) { + if (size < sizeof(struct microcode_header_intel)) + break; + + mc_header = (struct microcode_header_intel *)data; + + mc_size = get_totalsize(mc_header); + if (!mc_size || + mc_size > size || + microcode_sanity_check(data, 0) < 0) + break; + + size -= mc_size; + + if (!find_matching_signature(data, uci->cpu_sig.sig, + uci->cpu_sig.pf)) { + data += mc_size; + continue; + } + + if (save) { + save_microcode_patch(uci, data, mc_size); + goto next; + } + + + if (!patch) { + if (!has_newer_microcode(data, + uci->cpu_sig.sig, + uci->cpu_sig.pf, + uci->cpu_sig.rev)) + goto next; + + } else { + struct microcode_header_intel *phdr = &patch->hdr; + + if (!has_newer_microcode(data, + phdr->sig, + phdr->pf, + phdr->rev)) + goto next; + } + + /* We have a newer patch, save it. */ + patch = data; + +next: + data += mc_size; + } + + if (size) + return NULL; + + return patch; +} + +static void show_saved_mc(void) +{ +#ifdef DEBUG + int i = 0, j; + unsigned int sig, pf, rev, total_size, data_size, date; + struct ucode_cpu_info uci; + struct ucode_patch *p; + + if (list_empty(µcode_cache)) { + pr_debug("no microcode data saved.\n"); + return; + } + + intel_cpu_collect_info(&uci); + + sig = uci.cpu_sig.sig; + pf = uci.cpu_sig.pf; + rev = uci.cpu_sig.rev; + pr_debug("CPU: sig=0x%x, pf=0x%x, rev=0x%x\n", sig, pf, rev); + + list_for_each_entry(p, µcode_cache, plist) { + struct microcode_header_intel *mc_saved_header; + struct extended_sigtable *ext_header; + struct extended_signature *ext_sig; + int ext_sigcount; + + mc_saved_header = (struct microcode_header_intel *)p->data; + + sig = mc_saved_header->sig; + pf = mc_saved_header->pf; + rev = mc_saved_header->rev; + date = mc_saved_header->date; + + total_size = get_totalsize(mc_saved_header); + data_size = get_datasize(mc_saved_header); + + pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, total size=0x%x, date = %04x-%02x-%02x\n", + i++, sig, pf, rev, total_size, + date & 0xffff, + date >> 24, + (date >> 16) & 0xff); + + /* Look for ext. headers: */ + if (total_size <= data_size + MC_HEADER_SIZE) + continue; + + ext_header = (void *)mc_saved_header + data_size + MC_HEADER_SIZE; + ext_sigcount = ext_header->count; + ext_sig = (void *)ext_header + EXT_HEADER_SIZE; + + for (j = 0; j < ext_sigcount; j++) { + sig = ext_sig->sig; + pf = ext_sig->pf; + + pr_debug("\tExtended[%d]: sig=0x%x, pf=0x%x\n", + j, sig, pf); + + ext_sig++; + } + } +#endif +} + +/* + * Save this microcode patch. It will be loaded early when a CPU is + * hot-added or resumes. + */ +static void save_mc_for_early(struct ucode_cpu_info *uci, u8 *mc, unsigned int size) +{ + /* Synchronization during CPU hotplug. */ + static DEFINE_MUTEX(x86_cpu_microcode_mutex); + + mutex_lock(&x86_cpu_microcode_mutex); + + save_microcode_patch(uci, mc, size); + show_saved_mc(); + + mutex_unlock(&x86_cpu_microcode_mutex); +} + +static bool load_builtin_intel_microcode(struct cpio_data *cp) +{ + unsigned int eax = 1, ebx, ecx = 0, edx; + struct firmware fw; + char name[30]; + + if (IS_ENABLED(CONFIG_X86_32)) + return false; + + native_cpuid(&eax, &ebx, &ecx, &edx); + + sprintf(name, "intel-ucode/%02x-%02x-%02x", + x86_family(eax), x86_model(eax), x86_stepping(eax)); + + if (firmware_request_builtin(&fw, name)) { + cp->size = fw.size; + cp->data = (void *)fw.data; + return true; + } + + return false; +} + +/* + * Print ucode update info. + */ +static void +print_ucode_info(struct ucode_cpu_info *uci, unsigned int date) +{ + pr_info_once("microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n", + uci->cpu_sig.rev, + date & 0xffff, + date >> 24, + (date >> 16) & 0xff); +} + +#ifdef CONFIG_X86_32 + +static int delay_ucode_info; +static int current_mc_date; + +/* + * Print early updated ucode info after printk works. This is delayed info dump. + */ +void show_ucode_info_early(void) +{ + struct ucode_cpu_info uci; + + if (delay_ucode_info) { + intel_cpu_collect_info(&uci); + print_ucode_info(&uci, current_mc_date); + delay_ucode_info = 0; + } +} + +/* + * At this point, we can not call printk() yet. Delay printing microcode info in + * show_ucode_info_early() until printk() works. + */ +static void print_ucode(struct ucode_cpu_info *uci) +{ + struct microcode_intel *mc; + int *delay_ucode_info_p; + int *current_mc_date_p; + + mc = uci->mc; + if (!mc) + return; + + delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info); + current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date); + + *delay_ucode_info_p = 1; + *current_mc_date_p = mc->hdr.date; +} +#else + +static inline void print_ucode(struct ucode_cpu_info *uci) +{ + struct microcode_intel *mc; + + mc = uci->mc; + if (!mc) + return; + + print_ucode_info(uci, mc->hdr.date); +} +#endif + +static int apply_microcode_early(struct ucode_cpu_info *uci, bool early) +{ + struct microcode_intel *mc; + u32 rev; + + mc = uci->mc; + if (!mc) + return 0; + + /* + * Save us the MSR write below - which is a particular expensive + * operation - when the other hyperthread has updated the microcode + * already. + */ + rev = intel_get_microcode_revision(); + if (rev >= mc->hdr.rev) { + uci->cpu_sig.rev = rev; + return UCODE_OK; + } + + /* + * Writeback and invalidate caches before updating microcode to avoid + * internal issues depending on what the microcode is updating. + */ + native_wbinvd(); + + /* write microcode via MSR 0x79 */ + native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits); + + rev = intel_get_microcode_revision(); + if (rev != mc->hdr.rev) + return -1; + + uci->cpu_sig.rev = rev; + + if (early) + print_ucode(uci); + else + print_ucode_info(uci, mc->hdr.date); + + return 0; +} + +int __init save_microcode_in_initrd_intel(void) +{ + struct ucode_cpu_info uci; + struct cpio_data cp; + + /* + * initrd is going away, clear patch ptr. We will scan the microcode one + * last time before jettisoning and save a patch, if found. Then we will + * update that pointer too, with a stable patch address to use when + * resuming the cores. + */ + intel_ucode_patch = NULL; + + if (!load_builtin_intel_microcode(&cp)) + cp = find_microcode_in_initrd(ucode_path, false); + + if (!(cp.data && cp.size)) + return 0; + + intel_cpu_collect_info(&uci); + + scan_microcode(cp.data, cp.size, &uci, true); + + show_saved_mc(); + + return 0; +} + +/* + * @res_patch, output: a pointer to the patch we found. + */ +static struct microcode_intel *__load_ucode_intel(struct ucode_cpu_info *uci) +{ + static const char *path; + struct cpio_data cp; + bool use_pa; + + if (IS_ENABLED(CONFIG_X86_32)) { + path = (const char *)__pa_nodebug(ucode_path); + use_pa = true; + } else { + path = ucode_path; + use_pa = false; + } + + /* try built-in microcode first */ + if (!load_builtin_intel_microcode(&cp)) + cp = find_microcode_in_initrd(path, use_pa); + + if (!(cp.data && cp.size)) + return NULL; + + intel_cpu_collect_info(uci); + + return scan_microcode(cp.data, cp.size, uci, false); +} + +void __init load_ucode_intel_bsp(void) +{ + struct microcode_intel *patch; + struct ucode_cpu_info uci; + + patch = __load_ucode_intel(&uci); + if (!patch) + return; + + uci.mc = patch; + + apply_microcode_early(&uci, true); +} + +void load_ucode_intel_ap(void) +{ + struct microcode_intel *patch, **iup; + struct ucode_cpu_info uci; + + if (IS_ENABLED(CONFIG_X86_32)) + iup = (struct microcode_intel **) __pa_nodebug(&intel_ucode_patch); + else + iup = &intel_ucode_patch; + + if (!*iup) { + patch = __load_ucode_intel(&uci); + if (!patch) + return; + + *iup = patch; + } + + uci.mc = *iup; + + apply_microcode_early(&uci, true); +} + +static struct microcode_intel *find_patch(struct ucode_cpu_info *uci) +{ + struct microcode_header_intel *phdr; + struct ucode_patch *iter, *tmp; + + list_for_each_entry_safe(iter, tmp, µcode_cache, plist) { + + phdr = (struct microcode_header_intel *)iter->data; + + if (phdr->rev <= uci->cpu_sig.rev) + continue; + + if (!find_matching_signature(phdr, + uci->cpu_sig.sig, + uci->cpu_sig.pf)) + continue; + + return iter->data; + } + return NULL; +} + +void reload_ucode_intel(void) +{ + struct microcode_intel *p; + struct ucode_cpu_info uci; + + intel_cpu_collect_info(&uci); + + p = find_patch(&uci); + if (!p) + return; + + uci.mc = p; + + apply_microcode_early(&uci, false); +} + +static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) +{ + static struct cpu_signature prev; + struct cpuinfo_x86 *c = &cpu_data(cpu_num); + unsigned int val[2]; + + memset(csig, 0, sizeof(*csig)); + + csig->sig = cpuid_eax(0x00000001); + + if ((c->x86_model >= 5) || (c->x86 > 6)) { + /* get processor flags from MSR 0x17 */ + rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + csig->pf = 1 << ((val[1] >> 18) & 7); + } + + csig->rev = c->microcode; + + /* No extra locking on prev, races are harmless. */ + if (csig->sig != prev.sig || csig->pf != prev.pf || csig->rev != prev.rev) { + pr_info("sig=0x%x, pf=0x%x, revision=0x%x\n", + csig->sig, csig->pf, csig->rev); + prev = *csig; + } + + return 0; +} + +static enum ucode_state apply_microcode_intel(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct cpuinfo_x86 *c = &cpu_data(cpu); + bool bsp = c->cpu_index == boot_cpu_data.cpu_index; + struct microcode_intel *mc; + enum ucode_state ret; + static int prev_rev; + u32 rev; + + /* We should bind the task to the CPU */ + if (WARN_ON(raw_smp_processor_id() != cpu)) + return UCODE_ERROR; + + /* Look for a newer patch in our cache: */ + mc = find_patch(uci); + if (!mc) { + mc = uci->mc; + if (!mc) + return UCODE_NFOUND; + } + + /* + * Save us the MSR write below - which is a particular expensive + * operation - when the other hyperthread has updated the microcode + * already. + */ + rev = intel_get_microcode_revision(); + if (rev >= mc->hdr.rev) { + ret = UCODE_OK; + goto out; + } + + /* + * Writeback and invalidate caches before updating microcode to avoid + * internal issues depending on what the microcode is updating. + */ + native_wbinvd(); + + /* write microcode via MSR 0x79 */ + wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits); + + rev = intel_get_microcode_revision(); + + if (rev != mc->hdr.rev) { + pr_err("CPU%d update to revision 0x%x failed\n", + cpu, mc->hdr.rev); + return UCODE_ERROR; + } + + if (bsp && rev != prev_rev) { + pr_info("updated to revision 0x%x, date = %04x-%02x-%02x\n", + rev, + mc->hdr.date & 0xffff, + mc->hdr.date >> 24, + (mc->hdr.date >> 16) & 0xff); + prev_rev = rev; + } + + ret = UCODE_UPDATED; + +out: + uci->cpu_sig.rev = rev; + c->microcode = rev; + + /* Update boot_cpu_data's revision too, if we're on the BSP: */ + if (bsp) + boot_cpu_data.microcode = rev; + + return ret; +} + +static enum ucode_state generic_load_microcode(int cpu, struct iov_iter *iter) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + unsigned int curr_mc_size = 0, new_mc_size = 0; + enum ucode_state ret = UCODE_OK; + int new_rev = uci->cpu_sig.rev; + u8 *new_mc = NULL, *mc = NULL; + unsigned int csig, cpf; + + while (iov_iter_count(iter)) { + struct microcode_header_intel mc_header; + unsigned int mc_size, data_size; + u8 *data; + + if (!copy_from_iter_full(&mc_header, sizeof(mc_header), iter)) { + pr_err("error! Truncated or inaccessible header in microcode data file\n"); + break; + } + + mc_size = get_totalsize(&mc_header); + if (mc_size < sizeof(mc_header)) { + pr_err("error! Bad data in microcode data file (totalsize too small)\n"); + break; + } + data_size = mc_size - sizeof(mc_header); + if (data_size > iov_iter_count(iter)) { + pr_err("error! Bad data in microcode data file (truncated file?)\n"); + break; + } + + /* For performance reasons, reuse mc area when possible */ + if (!mc || mc_size > curr_mc_size) { + vfree(mc); + mc = vmalloc(mc_size); + if (!mc) + break; + curr_mc_size = mc_size; + } + + memcpy(mc, &mc_header, sizeof(mc_header)); + data = mc + sizeof(mc_header); + if (!copy_from_iter_full(data, data_size, iter) || + microcode_sanity_check(mc, 1) < 0) { + break; + } + + csig = uci->cpu_sig.sig; + cpf = uci->cpu_sig.pf; + if (has_newer_microcode(mc, csig, cpf, new_rev)) { + vfree(new_mc); + new_rev = mc_header.rev; + new_mc = mc; + new_mc_size = mc_size; + mc = NULL; /* trigger new vmalloc */ + ret = UCODE_NEW; + } + } + + vfree(mc); + + if (iov_iter_count(iter)) { + vfree(new_mc); + return UCODE_ERROR; + } + + if (!new_mc) + return UCODE_NFOUND; + + vfree(uci->mc); + uci->mc = (struct microcode_intel *)new_mc; + + /* + * If early loading microcode is supported, save this mc into + * permanent memory. So it will be loaded early when a CPU is hot added + * or resumes. + */ + save_mc_for_early(uci, new_mc, new_mc_size); + + pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); + + return ret; +} + +static bool is_blacklisted(unsigned int cpu) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + + /* + * Late loading on model 79 with microcode revision less than 0x0b000021 + * and LLC size per core bigger than 2.5MB may result in a system hang. + * This behavior is documented in item BDF90, #334165 (Intel Xeon + * Processor E7-8800/4800 v4 Product Family). + */ + if (c->x86 == 6 && + c->x86_model == INTEL_FAM6_BROADWELL_X && + c->x86_stepping == 0x01 && + llc_size_per_core > 2621440 && + c->microcode < 0x0b000021) { + pr_err_once("Erratum BDF90: late loading with revision < 0x0b000021 (0x%x) disabled.\n", c->microcode); + pr_err_once("Please consider either early loading through initrd/built-in or a potential BIOS update.\n"); + return true; + } + + return false; +} + +static enum ucode_state request_microcode_fw(int cpu, struct device *device, + bool refresh_fw) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + const struct firmware *firmware; + struct iov_iter iter; + enum ucode_state ret; + struct kvec kvec; + char name[30]; + + if (is_blacklisted(cpu)) + return UCODE_NFOUND; + + sprintf(name, "intel-ucode/%02x-%02x-%02x", + c->x86, c->x86_model, c->x86_stepping); + + if (request_firmware_direct(&firmware, name, device)) { + pr_debug("data file %s load failed\n", name); + return UCODE_NFOUND; + } + + kvec.iov_base = (void *)firmware->data; + kvec.iov_len = firmware->size; + iov_iter_kvec(&iter, ITER_SOURCE, &kvec, 1, firmware->size); + ret = generic_load_microcode(cpu, &iter); + + release_firmware(firmware); + + return ret; +} + +static struct microcode_ops microcode_intel_ops = { + .request_microcode_fw = request_microcode_fw, + .collect_cpu_info = collect_cpu_info, + .apply_microcode = apply_microcode_intel, +}; + +static int __init calc_llc_size_per_core(struct cpuinfo_x86 *c) +{ + u64 llc_size = c->x86_cache_size * 1024ULL; + + do_div(llc_size, c->x86_max_cores); + + return (int)llc_size; +} + +struct microcode_ops * __init init_intel_microcode(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || + cpu_has(c, X86_FEATURE_IA64)) { + pr_err("Intel CPU family 0x%x not supported\n", c->x86); + return NULL; + } + + llc_size_per_core = calc_llc_size_per_core(c); + + return µcode_intel_ops; +} |